Population dynamics of the European rabbit (Oryctolagus cuniculus) in north eastern Australia: simulated responses to control

Wild European rabbits are a serious problem to agriculture in Australia, with an estimated annual cost of A$ 113 million. Biological control agents (myxomatosis and rabbit haemorrhagic disease virus) have caused large and sustained declines in rabbit populations throughout Australia. A simulation model incorporates these diseases as well as warren destruction as methods of controlling rabbit populations in Queensland, north eastern Australia. These diseases reduced populations by 90-99% and the combination of these and warren destruction led to 100% control in simulations at six sites across southern Queensland. Increasing monthly pasture growth by 15% had little effect on simulated populations whereas a 15% decrease reduced populations by 0-50%. An increase in temperature of 2.5 °C would lead to a 15-60% decrease in populations. These effects suggest that climate change will lead to a decrease in the population of rabbits in Queensland and a retraction in the northern limit of their distribution in Australia.

How can warren destruction by ripping control European wild rabbits (Oryctolagus cuniculus) on large properties in the Australian arid zone?

Context: For over 100 years, control efforts have been unable to stop rabbits causing damage to cattle production and native plants and animals on large properties in arid parts of Australia. Warren destruction by ripping has shown promise, but doubts about long-term success and the perceived expense of treating vast areas have led to this technique not being commonly used. Aims: This study measured the long-term reduction in rabbit activity and calculated the potential cost saving associated with treating just the areas where rabbits are believed to survive drought. Wealso considered whether ripping should be used in a full-scale rabbit control program on a property where rabbits have been exceptionally resilient to the influence of biological and other control measures. Methods: Rabbits were counted along spotlight transects before warrens were ripped and during the two years after ripping, in treated and untreated plots. Rabbit activity was recorded to determine the immediate and long-term impact of ripping, up to seven years after treatment. The costs of ripping warrens within different distances from drought refuge areas were calculated. Key results: Destroying rabbit warrens by ripping caused an immediate reduction in rabbit activity and there were still 98% fewer rabbits counted by spotlight in ripped plots five months after ripping. Seven years after ripping no active warrens were found in ripped plots, whereas 57% of warrens in unripped plots showed signs of rabbit activity. The cost of ripping only the areas where rabbits were likely to seek refuge from drought was calculated to be less than 4%of the cost of ripping all warrens on the property. Conclusions: Destroying rabbit warrens by ripping is a very effective way of reducing rabbit numbers on large properties in arid Australia. Ripping should commence in areas used by rabbits to survive drought. It is possible that no further ripping will be required. Implications: Strategic destruction of warrens in drought refuge areas could provide an alternative to biological control for managing rabbits on large properties in the Australian arid zone.

Technical efficiency of blood component preparation in blood centres of 10 European countries

Various reasons, such as ethical issues in maintaining blood resources, growing costs, and strict requirements for safe blood, have increased the pressure for efficient use of resources in blood banking. The competence of blood establishments can be characterized by their ability to predict the volume of blood collection to be able to provide cellular blood components in a timely manner as dictated by hospital demand. The stochastically varying clinical need for platelets (PLTs) sets a specific challenge for balancing supply with requests. Labour has been proven a primary cost-driver and should be managed efficiently. International comparisons of blood banking could recognize inefficiencies and allow reallocation of resources. Seventeen blood centres from 10 countries in continental Europe, Great Britain, and Scandinavia participated in this study. The centres were national institutes (5), parts of the local Red Cross organisation (5), or integrated into university hospitals (7). This study focused on the departments of blood component preparation of the centres. The data were obtained retrospectively by computerized questionnaires completed via Internet for the years 2000-2002. The data were used in four original articles (numbered I through IV) that form the basis of this thesis. Non-parametric data envelopment analysis (DEA, II-IV) was applied to evaluate and compare the relative efficiency of blood component preparation. Several models were created using different input and output combinations. The focus of comparisons was on the technical efficiency (II-III) and the labour efficiency (I, IV). An empirical cost model was tested to evaluate the cost efficiency (IV). Purchasing power parities (PPP, IV) were used to adjust the costs of the working hours and to make the costs comparable among countries. The total annual number of whole blood (WB) collections varied from 8,880 to 290,352 in the centres (I). Significant variation was also observed in the annual volume of produced red blood cells (RBCs) and PLTs. The annual number of PLTs produced by any method varied from 2,788 to 104,622 units. In 2002, 73% of all PLTs were produced by the buffy coat (BC) method, 23% by aphaeresis and 4% by the platelet-rich plasma (PRP) method. The annual discard rate of PLTs varied from 3.9% to 31%. The mean discard rate (13%) remained in the same range throughout the study period and demonstrated similar levels and variation in 2003-2004 according to a specific follow-up question (14%, range 3.8%-24%). The annual PLT discard rates were, to some extent, associated with production volumes. The mean RBC discard rate was 4.5% (range 0.2%-7.7%). Technical efficiency showed marked variation (median 60%, range 41%-100%) among the centres (II). Compared to the efficient departments, the inefficient departments used excess labour resources (and probably) production equipment to produce RBCs and PLTs. Technical efficiency tended to be higher when the (theoretical) proportion of lost WB collections (total RBC+PLT loss) from all collections was low (III). The labour efficiency varied remarkably, from 25% to 100% (median 47%) when working hours were the only input (IV). Using the estimated total costs as the input (cost efficiency) revealed an even greater variation (13%-100%) and overall lower efficiency level compared to labour only as the input. In cost efficiency only, the savings potential (observed inefficiency) was more than 50% in 10 departments, whereas labour and cost savings potentials were both more than 50% in six departments. The association between department size and efficiency (scale efficiency) could not be verified statistically in the small sample. In conclusion, international evaluation of the technical efficiency in component preparation departments revealed remarkable variation. A suboptimal combination of manpower and production output levels was the major cause of inefficiency, and the efficiency did not directly relate to production volume. Evaluation of the reasons for discarding components may offer a novel approach to study efficiency. DEA was proven applicable in analyses including various factors as inputs and outputs. This study suggests that analytical models can be developed to serve as indicators of technical efficiency and promote improvements in the management of limited resources. The work also demonstrates the importance of integrating efficiency analysis into international comparisons of blood banking.

Meta-analysis of genome-wide association for migraine in six population-based European cohorts

Migraine is a common neurological disorder with a genetically complex background. This paper describes a meta-analysis of genome-wide association (GWA) studies on migraine, performed by the Dutch-Icelandic migraine genetics (DICE) consortium, which brings together six population-based European migraine cohorts with a total sample size of 10,980 individuals (2446 cases and 8534 controls). A total of 32 SNPs showed marginal evidence for association at a P-value<10(-5). The best result was obtained for SNP rs9908234, which had a P-value of 8.00 x 10(-8). This top SNP is located in the nerve growth factor receptor (NGFR) gene. However, this SNP did not replicate in three cohorts from the Netherlands and Australia. Of the other 31 SNPs, 18 SNPs were tested in two replication cohorts, but none replicated. In addition, we explored previously identified candidate genes in the meta-analysis data set. This revealed a modest gene-based significant association between migraine and the metadherin (MTDH) gene, previously identified in the first clinic-based GWA study (GWAS) for migraine (Bonferroni-corrected gene-based P-value=0.026). This finding is consistent with the involvement of the glutamate pathway in migraine. Additional research is necessary to further confirm the involvement of glutamate.

A reanalysis of 409 European-Ancestry and African American schizophrenia pedigrees reveals significant linkage to 8p23.3 with evidence of locus heterogeneity

The detection and replication of schizophrenia risk loci can require substantial sample sizes, which has prompted various collaborative efforts for combining multiple samples. However, pooled samples may comprise sub-samples with substantial population genetic differences, including allele frequency differences. We investigated the impact of population differences via linkage reanalysis of Molecular Genetics of Schizophrenia 1 (MGS1) affected sibling-pair data, comprising two samples of distinct ancestral origin: European (EA: 263 pedigrees) and African-American (AA: 146 pedigrees). To exploit the linkage information contained within these distinct continental samples, we performed separate analyses of the individual samples, allowing for within-sample locus heterogeneity, and the pooled sample, allowing for both within-sample and between-sample heterogeneity. Significance levels, corrected for the multiple tests, were determined empirically. For all suggestive peaks, stronger linkage evidence was obtained in either the EA or AA sample than the combined sample, regardless of how heterogeneity was modeled for the latter. Notably, we report genomewide significant linkage of schizophrenia to 8p23.3 and evidence for a second, independent susceptibility locus, reaching suggestive linkage, 29 cM away on 8p21.3. We also detected suggestive linkage on chromosomes 5p13.3 and 7q36.2. Many regions showed pronounced differences in the extent of linkage between the EA and AA samples. This reanalysis highlights the potential impact of population differences upon linkage evidence in pooled data and demonstrates a useful approach for the analysis of samples drawn from distinct continental groups.

A capability-based view of organisational renewal : Combining opportunity- and advantage-seeking growth in large, established European and North American wood-industry companies

The purpose of this study was to extend understanding of how large firms pursuing sustained and profitable growth manage organisational renewal. A multiple-case study was conducted in 27 North American and European wood-industry companies, of which 11 were chosen for closer study. The study combined the organisational-capabilities approach to strategic management with corporate-entrepreneurship thinking. It charted the further development of an identification and classification system for capabilities comprising three dimensions: (i) the dynamism between firm-specific and industry-significant capabilities, (ii) hierarchies of capabilities and capability portfolios, and (iii) their internal structure. Capability building was analysed in the context of the organisational design, the technological systems and the type of resource-bundling process (creating new vs. entrenching existing capabilities). The thesis describes the current capability portfolios and the organisational changes in the case companies. It also clarifies the mechanisms through which companies can influence the balance between knowledge search and the efficiency of knowledge transfer and integration in their daily business activities, and consequently the diversity of their capability portfolio and the breadth and novelty of their product/service range. The largest wood-industry companies of today must develop a seemingly dual strategic focus: they have to combine leading-edge, innovative solutions with cost-efficient, large-scale production. The use of modern technology in production was no longer a primary source of competitiveness in the case companies, but rather belonged to the portfolio of basic capabilities. Knowledge and information management had become an industry imperative, on a par with cost effectiveness. Yet, during the period of this research, the case companies were better in supporting growth in volume of the existing activity than growth through new economic activities. Customer-driven, incremental innovation was preferred over firm-driven innovation through experimentation. The three main constraints on organisational renewal were the lack of slack resources, the aim for lean, centralised designs, and the inward-bound communication climate.

Genetic diversity of Atlantic salmon (Salmo salar) and European whitefish (Coregonus lavaretus) in the Baltic Sea

We described the patterns and extent of microsatellite DNA variation in historical and present-day Atlantic salmon (Salmo salar L.) stocks in the Baltic Sea and neighbouring areas, and in European whitefish (Coregonus lavaretus) ecotypes, populations and run-timing types in Finland. Moreover, the amount and pattern of genetic diversity in historical salmon populations before human impact were described, and the proportion of diversity maintained in the present hatchery stocks evaluated. Salmon populations in the Baltic Sea were, on average, significantly less variable than eastern Atlantic populations, and the diversity of landlocked populations (Lakes Vänern, Saimaa, Onega and Ladoga) was in turn significantly lower than that of anadromous salmon populations in the Baltic Sea populations. Within the Baltic Sea, the anadromous populations of Atlantic salmon formed three clear groups, corresponding to the northern (Gulf of Bothnia), eastern (Gulf of Finland and eastern Baltic Main Basin) and southern (western Baltic Main Basin) regions. Based on microsatellite data, three salmon population groups in the Baltic Sea were considered potentially different colonization lineages. In short- and long-term breeding programmes of Atlantic salmon, the average observed rate of loss of alleles was 4.9% and 2.0% per generation and the average rate of loss of heterozygosity was 1.4% and 1% per generation, respectively. When comparing the genetic parameters of stocks before and after hatchery breeding of several successive generations (Rivers Iijoki and Oulujoki), statistically significant changes in allele frequencies were common, while large wild stock in the Teno River has remained temporally very stable over 56 years. Despite the observed losses of genetic diversity in broodstock breeding, a large proportion of the genetic resources of the extirpated stocks are still conserved in the broodstocks. Genetic differentiation among European whitefish ecotypes was generally low, thus giving support to the hypothesis of one native European whitefish species in Fennoscandia. Among the ecotypes, the northern, large sparsely rakered, bottom-dwelling whitefish was the most unique. The known genetic differences in quantitative traits have thus either developed independently of potential phylogenetic lineages, or the lineages have mixed and the quantitative traits of the ecotypes, like gill-raker number, have later changed according to environment and selection pressures. Overall, genetic distances between the anadromous whitefish populations along the Finnish coast, especially in the Bothnian Bay area, were small. Wild whitefish populations studied had slightly higher allelic diversity than hatchery-reared populations in corresponding rivers.

Moving European research on work and ageing forward: Overview and agenda

This paper summarizes the state of affairs of European research on ageing and work. After a close inspection of the age construct, an overview is presented of research in four areas: the relationship between age and HR-policies, early retirement, age and performance/employability, age and health/well-being. The overview results in a research agenda on work and ageing and in recommendations for practice.

Informational efficiency of the European Union emission allowance market

This thesis studies the informational efficiency of the European Union emission allowance (EUA) market. In an efficient market, the market price is unpredictable and profits above average are impossible in the long run. The main research problem is does the EUA price follow a random walk. The method is an econometric analysis of the price series, which includes an autocorrelation coefficient test and a variance ratio test. The results reveal that the price series is autocorrelated and therefore a nonrandom walk. In order to find out the extent of predictability, the price series is modelled with an autoregressive model. The conclusion is that the EUA price is autocorrelated only to a small degree and that the predictability cannot be used to make extra profits. The EUA market is therefore considered informationally efficient, although the price series does not fulfill the requirements of a random walk. A market review supports the conclusion, but it is clear that the maturing of the market is still in process.

Proportion of Jews to general population of the European provinces of Russia

Digital image

Population density of the European provinces of Russia

Digital image

Posted Workers and Free Movement of Services in the European Union – the Impact on National Employment and Immigration Law

This thesis examines posting of workers within the free movement of services in the European Union. The emphasis is on the case law of the European Court of Justice and in the role it has played in the liberalisation of the service sector in respect of posting of workers. The case law is examined from two different viewpoints: firstly, that of employment law and secondly, immigration law. The aim is to find out how active a role the Court has taken with regard these two fields of law and what are the implications of the Court’s judgments for the regulation on a national level. The first part of the thesis provides a general review of the Community law principles governing the freedom to provide services in the EU. The second part presents the Posted Workers’ Directive and the case law of the European Court of Justice before and after the enactment of the Directive from the viewpoint of employment law. Special attention is paid to a recent judgment in which the Court has taken a restrictive position with regard to a trade union’s right to take collective action against a service provider established in another Member State. The third part of the thesis concentrates, firstly, on the legal status of non-EU nationals lawfully resident in the EU. Secondly, it looks into the question of how the Court’s case law has affected the possibilities to use non-EU nationals as posted workers within the freedom to provide services. The final chapter includes a critical analysis of the Court’s case law on posted workers. The judgments of the European Court of Justice are the principal source of law for this thesis. In the primary legislation the focus is on Articles 49 EC and 50 EC that lay down the rules concerning the free movement of services. Within the secondary legislation, the present work principally concentrates on the Posted Workers’ Directive. It also examines proposals of the European Commission and directives that have been adopted in the field of immigration. The conclusions of the case study are twofold: while in the field of employment law, the European Court of Justice has based its judgments on a very literal interpretation of the Posted Workers’ Directive, in the field of immigration its conclusions have been much more innovative. In both fields of regulation the Court’s judgments have far-reaching implications for the rules concerning posting of workers leaving very little discretion for the Member States’ authorities.

Monopolising Names? : The Protection of Geographical Indications in the European Community

Marketing of goods under geographical names has always been common. Aims to prevent abuse have given rise to separate forms of legal protection for geographical indications (GIs) both nationally and internationally. The European Community (EC) has also gradually enacted its own legal regime to protect geographical indications. The legal protection of GIs has traditionally been based on the idea that geographical origin endows a product exclusive qualities and characteristics. In today s world we are able to replicate almost any prod-uct anywhere, including its qualities and characteristics. One would think that this would preclude protec-tion from most geographical names, yet the number of geographical indications seems to be rising. GIs are no longer what they used to be. In the EC it is no longer required that a product is endowed exclusive characteristics by its geographical origin as long as consumers associate the product with a certain geo-graphical origin. This departure from the traditional protection of GIs is based on the premise that a geographical name extends beyond and exists apart from the product and therefore deserves protection itself. The thesis tries to clearly articulate the underlying reasons, justifications, principles and policies behind the protection of GIs in the EC and then scrutinise the scope and shape of the GI system in the light of its own justifications. The essential questions it attempts to aswer are (1) What is the basis and criteria for granting GI rights? (2) What is the scope of protection afforded to GIs? and (3) Are these both justified in the light of the functions and policies underlying granting and protecting of GIs? Despite the differences, the actual functions of GIs are in many ways identical to those of trade marks. Geographical indications have a limited role as source and quality indicators in allowing consumers to make informed and efficient choices in the market place. In the EC this role is undermined by allowing able room and discretion for uses that are arbitrary. Nevertheless, generic GIs are unable to play this role. The traditional basis for justifying legal protection seems implausible in most case. Qualities and charac-teristics are more likely to be related to transportable skill and manufacturing methods than the actual geographical location of production. Geographical indications are also incapable of protecting culture from market-induced changes. Protection against genericness, against any misuse, imitation and evocation as well as against exploiting the reputation of a GI seem to be there to protect the GI itself. Expanding or strengthening the already existing GI protection or using it to protect generic GIs cannot be justified with arguments on terroir or culture. The conclusion of the writer is that GIs themselves merit protection only in extremely rare cases and usually only the source and origin function of GIs should be protected. The approach should not be any different from one taken in trade mark law. GI protection should not be used as a means to mo-nopolise names. At the end of the day, the scope of GI protection is nevertheless a policy issue.