Designing computer architecture research workloads

MinneSPEC proposes reduced input sets that microprocessor designers can use to model representative short-running workloads. A four-step methodology verifies the program behavior similarity of these input sets to reference sets.

The Union Flag: Change and Diversity

This is an exhibition of many, though not all, of the Union Jack–type designs which have been displayed in Northern Ireland over the last decade. The flags show the imagination of their designers in re-imagining the Union Flag – often to celebrate specific events such as a royal wedding or jubilee, the end of World War II, or the centenary of the signing of the Ulster Covenant.

A streamlined life-cycle assessment and decision tool for used tyres recycling

In order to achieve progress towards sustainable resource management, it is essential to evaluate options for the reuse and recycling of secondary raw materials, in order to provide a robust evidence base for decision makers. This paper presents the research undertaken in the development of a web-based decision-support tool (the used tyres resource efficiency tool) to compare three processing routes for used tyres compared to their existing primary alternatives. Primary data on the energy and material flows for the three routes, and their alternatives were collected and analysed. The methodology used was a streamlined life-cycle assessment (sLCA) approach. Processes included were: car tyre baling against aggregate gabions; car tyre retreading against new car tyres; and car tyre shred used in landfill engineering against primary aggregates. The outputs of the assessment, and web-based tool, were estimates of raw materials used, carbon dioxide emissions and costs. The paper discusses the benefits of carrying out a streamlined LCA and using the outputs of this analysis to develop a decision-support tool. The strengths and weakness of this approach are discussed and future research priorities identified which could facilitate the use of life cycle approaches by designers and practitioners.

A design model: the Autism Spectrum Disorder Classroom Design Kit

Architects and designers have a responsibility to provide an inclusive built environment. However for those with a diagnosis of Autism Spectrum Disorder (ASD), the built environment can be a frightening and confusing place, difficult to negotiate and tolerate. The challenge of integrating more fully into society is denied by an alienating built environment. For ASD pupils in a poorly designed school, their environment can distance them from learning. Instead, if more at ease in their surroundings, in an ASD-friendly environment, the ASD pupil stands a greater chance of doing better.

However a difficulty exists in that most architects are not knowledgeable in designing for those with ASD. Any available design guidelines for architects tend, because of the inherent difficulties associated with a spectrum, to be general in their information. Therefore, if wanting to provide an ASD-friendly learning environment, there is a need to ensure that teachers, as the experts, can most clearly and effectively impart their knowledge and requirements to architects.

This paper sets out the challenges and difficulties inherent in the design process when designing for ASD. It then sets out an alternative strategy to the usual method of drawing-centric dialogue between teacher and architect by using models instead as a basis for a more common language. An ASD Classroom Design Kit was designed and developed by Queen’s University of Belfast Architecture students. It was then used by ASD teaching staff from the Southern Education and Library Board in Northern Ireland as a case study to trial its effectiveness. The paper outlines how the study was carried out before concluding with reflections by both teaching staff and architect on using the ASD Classroom Design Kit.

It is hoped that this paper will firstly highlight the need for better dialogue between expert and architect when considering ASD and the Built Environment and secondly, that it may encourage others to consider using models to convey their ideas and knowledge when designing, not just for ASD, but for other Special Educational Needs and disabilities.

From bit level systolic arrays to HDTV processor chips

The initial part of this paper reviews the early challenges (c 1980) in achieving real-time silicon implementations of DSP computations. In particular, it discusses research on application specific architectures, including bit level systolic circuits that led to important advances in achieving the DSP performance levels then required. These were many orders of magnitude greater than those achievable using programmable (including early DSP) processors, and were demonstrated through the design of commercial digital correlator and digital filter chips. As is discussed, an important challenge was the application of these concepts to recursive computations as occur, for example, in Infinite Impulse Response (IIR) filters. An important breakthrough was to show how fine grained pipelining can be used if arithmetic is performed most significant bit (msb) first. This can be achieved using redundant number systems, including carry-save arithmetic. This research and its practical benefits were again demonstrated through a number of novel IIR filter chip designs which at the time, exhibited performance much greater than previous solutions. The architectural insights gained coupled with the regular nature of many DSP and video processing computations also provided the foundation for new methods for the rapid design and synthesis of complex DSP System-on-Chip (SoC), Intellectual Property (IP) cores. This included the creation of a wide portfolio of commercial SoC video compression cores (MPEG2, MPEG4, H.264) for very high performance applications ranging from cell phones to High Definition TV (HDTV). The work provided the foundation for systematic methodologies, tools and design flows including high-level design optimizations based on "algorithmic engineering" and also led to the creation of the Abhainn tool environment for the design of complex heterogeneous DSP platforms comprising processors and multiple FPGAs. The paper concludes with a discussion of the problems faced by designers in developing complex DSP systems using current SoC technology. © 2007 Springer Science+Business Media, LLC.

A Novel Method to Enable Trade-offs Across the Whole Product Life of an Aircraft Using Value Driven Design

The increasing need to understand complex products and systems with long life spans, presents a significant challenge to designers who increasingly require a broader understanding of the operational aspects of the system. This demands an evolution in current design practice, as designers are often constrained to provide a subsystem solution without full knowledge of the global system operation. Recently there has been a push to consider value centric approaches which should facilitate better or more rapid convergence to design solutions with predictable completion schedules. Value Driven Design is one such approach, in which value is used as the system top level objective function. This provides a broader view of the system and enables all sub-systems and components to be designed with a view to the effect on project value. It also has the capacity to include value expressions for more qualitative aspects, such as environmental impact. However, application of the method to date has been restricted to comparing value in a programme where the lifespan is fixed and known a priori. This paper takes a novel view of value driven design through the surplus value objective function, and shows how it can be used to identify key sensitivities to guide designers in design trade-off decisions. By considering a new time based approach it can be used to identify optimum programme life-span and hence allow trade-offs over the whole product life.

Structural effects on the pH-dependent fluorescence of naphthalenic derivatives and consequences for sensing/switching

Naphthalenic compounds are a rich resource for designers of fluorescent sensing/switching/logic systems. The degree of internal charge transfer (ICT) character in the fluorophore excited states can vary from negligible to substantial. Naphthalene-1,8;4,5-diimides (11–13), 1,8-naphthalimides (16) and 4-chloro-1,8-naphthalimides (15) are of the former type. The latter type is represented by the 4-alkylamino-1,8-naphthalimides (1). Whether ICT-based or not, these serve as the fluorophore in ‘fluorophore-spacer-receptor’ switching systems where PET holds sway until the receptor is bound to H+. On the other hand, 4-dialkylamino-1,8-naphthalimides (3–4) show modest H+-induced fluorescence switching unless the 4-dialkylamino group is a part of a small ring (5). Electrostatic destabilization of a non-emissive twisted internal charge transfer (ICT) excited state is the origin of this behaviour. An evolution to the non-emissive twisted ICT excited state is responsible for the weak emission of the model compound 6 (and related structures 7 and 8) across the pH range. Twisted ICT excited states are also implicated in the switch 9 and its model compound 10, which are based on the 6-dialkylamino-3H-benzimidazo[2,1-a]benz[d,e]isoquinolin-3-one fluorophore.

Assessing Lifetime Homes Standards and Part M Building Regulations for Housing Design in the UK

The aims of this article are to examine Lifetime Home Standards (LTHS) and Part M of the UK Building Regulations and to discuss how relevant and successful they are. The UK government expects all new homes to be built to LTHS by 2013. This is increasingly important with an ageing population. The home environment can enable independence and provide a therapeutic place for everyone. As Part M of the building regulations are compulsory in all housing and LTHS are mandatory for public sector housing, a review of research articles was undertaken on these standards. The paper begins with a brief background on accessibility regulations, followed by a critical review of the standards that takes the body of literature that has been written around them into account. This review suggests that the standards should be improved and that designers and architects face challenges to creatively incorporate them into housing design.

A qualitative enquiry into the appropriation of mobile telephony at the bottom of the pyramid

Purpose: The paper aims to analyse Bottom of the Pyramid (BoP) customers’ (e.g. Bangladeshi farmers) use and appropriation of mobile telephony and to critically identify a suitable research strategy for such investigation.

Design/methodology/approach: Concentrated ethnographic immersion was combined with both methodological and investigator triangulation during a four-month period of fieldwork conducted in Bangladeshi villages to obtain more robust findings. Concentrated immersion was required to achieve relatively speedier engagement owing to the difficulty in engaging with respondents on a long-term basis.

Findings: The farmers’ use of mobile telephony went beyond the initial adoption, as they appropriated it through social and institutional support, inventive means and/or changes in their own lifestyle. The paper argues that technology appropriation, being a result of the mutual shaping of technology, human skills and abilities and macro-environmental factors, enables users to achieve desired outcomes which may not always be the ones envisaged by the original designers.

Research limitations/implications: The paper contributes to two major areas: first, it identifies technology appropriation as an important and emerging concept in international marketing research; second, it suggests a concentrated form of ethnographic engagement for studying technology appropriation in a developing country context.

Practical implications: A good understanding of the dynamic interplay between users’ skills and abilities, social contexts and technological artefacts/applications is required in order for businesses to serve BoP customers profitably.

Originality/value: The paper presents a dynamic model of technology appropriation based on findings collected through a pragmatic approach by combining concentrated ethnographic immersion with methodological and investigator triangulation

After & Since: Strand Lamps

A tribute to the Wexford born internationally acclaimed Irish designer and architect EILEEN GRAY and an intimate look at the work of 10 outstanding designers, craftspeople and artists working in Ireland today.

Optimising the locations of thermally sensitive equipment in an aircraft crown compartment

A Design of Experiments (DoE) analysis was undertaken to generate a list of configurations for CFD numerical simulation of an aircraft crown compartment. Fitted regression models were built to predict the convective heat transfer coefficients of thermally sensitive dissipating elements located inside this compartment. These are namely the SEPDC and the Route G. Currently they are positioned close to the fuselage and it is of interest to optimise the heat transfer for reliability and performance purposes. Their locations and the external fuselage surface temperature were selected as input variables for the DoE. The models fit the CFD data with values ranging from 0.878 to 0.978, and predict that the optimum locations in terms of heat transfer are when the elements are positioned as close to the crown floor as possible ( and ?min. limits), where they come in direct contact with the air flow from the cabin ventilation system, and when they are positioned close to the centreline ( and ?CL). The methodology employed allows aircraft thermal designers to optimise equipment placement in confined areas of an aircraft during the design phase. The determined models should be incorporated into global aircraft numerical models to improve accuracy and reduce model size and computational time. © 2012 Elsevier Masson SAS. All rights reserved.

Impact of a play-based curriculum in the first two years of primary school: literacy and numeracy outcomes over seven years

In 2000–2002 an innovative early years curriculum, the Enriched Curriculum (EC), was introduced
into 120 volunteer schools across Northern Ireland, replacing a traditional curriculum similar to
others across the UK at that time. It was intended by the designers to be developmentally appropriate
and play-based with the primary goal of preventing the experience of persistent early failure in
children. The EC was not intended to be a literacy and numeracy intervention, yet it did considerably
alter pedagogy in these domains, particularly the age at which formal reading and mathematics
instruction began. As part of a multi-method evaluation running from 2000–2008, the research
team followed the primary school careers of the first two successive cohorts of EC children, comparing
them with year-ahead controls attending the same 24 schools. Compared to the year-ahead control
group, the findings show that the EC children’s reading and mathematics scores fell behind in
the first two years but the majority of EC children caught up by the end of their fourth year. Thereafter,
the performance of the first EC cohort fell away slightly, while that of the second continued to
match that of controls. Overall, the play-based curriculum had no statistically significant positive
effects on reading and mathematics in the medium term. At best, the EC children’s scores matched
those of controls.

Exposición Internacional 1910. Buenos Aires.: Didactic leisure and international recognition

International exhibitions were greatly responsible for the modernization of western society. The motive for these events was based on the possibility of enhancing the country’s international status abroad. The genesis of world exhibitions came from the conviction that humanity as a whole would improve the continual flow of new practical applications, the development of modern communication techniques and the social need for a medium that could acquaint the general public with changes in technology, economy and society .
Since the first national industrial exhibitions in Paris during the eighteenth century and especially starting from the first Great Exhibition in London’s Hyde Park in 1851 these international events spread steadily all over Europe and the United States, to reach Latin America in the beginnings of the twentieth century . The work of professionals such as Daniel Burnham, Werner Hegemann and Elbert Peets made the relation between exhibitions and urban transformation a much more connected one, setting a precedent for subsequent exhibitions.
In Buenos Aires, the celebration of the centennial of independence from Spain in 1910 had many meanings and repercussions. A series of factors allowed for a moment of change in the city. Official optimism, economical progress, inequality and social conflict made of this a suitable time for transformation. With the organization of the Exposición Internacional the government had, among others, one specific aim: to achieve a network of visual tools to set the feeling of belonging and provide an identity for the mixture of cultures that populated the city of Buenos Aires at the time. Another important objective of the government was to put Buenos Aires at the level of European cities.
Foreign professionals had a great influence in the conceptual and factual shaping of the exhibition and in the subsequent changes caused in the urban condition. The exhibition had an important role in the ways of thinking the city and in the leisure ideas it introduced. The exhibition, as a didactic tool, worked as a precedent for conceiving leisure spaces in the future. Urban and landscape planners such as Joseph Bouvard and Charles Thays were instrumental in great part of the design of the Exhibition, but it was not only the architects and designers who shaped the identity of the fair. Other visitors such as Jules Huret or Georges Clemenceau were responsible for giving the city an international image it did not previously have.
This paper will explore on the one hand the significance of the exhibition of 1910 for the shaping of the city and its image; and on the other hand, the role of foreign professionals and the reach these influences had.

Maintaining design intent for aircraft manufacture

Design and manufacture of aircraft requires deep multi-disciplinary understanding of system behaviour. The intention of the designer can get lost due to the many changes occurring to the product and the inability of the methods and tools used to capture it. Systems engineering and optimisation tools underpin industrial approaches to design, but are not without issue. The challenge is to find a route from concept to manufacture which enables designers to maintain their original intent. The novelty in this work is that the parameterisation used to build the CAD model reflects the manufacturing capability, ensuring design intent is maintained from concept to manufacture.

Dissidents with an innovation cause? Non-institutionalized actors ’ online social knowledge sharing, solution-finding tensions and technology management innovation

Purpose
– Traditionally, most studies focus on institutionalized management-driven actors to understand technology management innovation. The purpose of this paper is to argue that there is a need for research to study the nature and role of dissident non-institutionalized actors’ (i.e. outsourced web designers and rapid application software developers). The authors propose that through online social knowledge sharing, non-institutionalized actors’ solution-finding tensions enable technology management innovation.

Design/methodology/approach
– A synthesis of the literature and an analysis of the data (21 interviews) provided insights in three areas of solution-finding tensions enabling management innovation. The authors frame the analysis on the peripherally deviant work and the nature of the ways that dissident non-institutionalized actors deviate from their clients (understood as the firm) original contracted objectives.

Findings
– The findings provide insights into the productive role of solution-finding tensions in enabling opportunities for management service innovation. Furthermore, deviant practices that leverage non-institutionalized actors’ online social knowledge to fulfill customers’ requirements are not interpreted negatively, but as a positive willingness to proactively explore alternative paths.

Research limitations/implications
– The findings demonstrate the importance of dissident non-institutionalized actors in technology management innovation. However, this work is based on a single country (USA) and additional research is needed to validate and generalize the findings in other cultural and institutional settings.

Originality/value
– This paper provides new insights into the perceptions of dissident non-institutionalized actors in the practice of IT managerial decision making. The work departs from, but also extends, the previous literature, demonstrating that peripherally deviant work in solution-finding practice creates tensions, enabling management innovation between IT providers and users.