Lattice effects in the quasi-two-dimensional valence-bond-solid Mott insulator EtMe3P[Pd(dmit)(2)](2)

The organic charge-transfer salt EtMe3P[Pd(dmit)(2)](2) is a quasi-two-dimensional Mott insulator with localized spins S = 1/2 residing on a distorted triangular lattice. Here we report measurements of the uniaxial thermal expansion coefficients alpha(i) along the in-plane i = a and c axis as well as along the out-of-plane b axis for temperatures 1.4 K <= T <= 200 K. Particular attention is paid to the lattice effects around the phase transition at T-VBS = 25 K into a low-temperature valence-bond-solid phase and the paramagnetic regime above where effects of short-range antiferromagnetic correlations can be expected. The salient results of our study include (i) the observation of strongly anisotropic lattice distortions accompanying the formation of the valence-bond-solid phase, and (ii) a distinct anomaly in the thermal expansion coefficients in the paramagnetic regime around 40 K. Our results demonstrate that upon cooling through T-VBS the in-plane c axis, along which the valence bonds form, contracts while the second in-plane a axis elongates by the same relative amount. Surprisingly, the dominant effect is observed for the out-of-plane b axis which shrinks significantly upon cooling through T-VBS. The pronounced anomaly in alpha(i) around 40 K is attributed to short-range magnetic correlations. It is argued that the position of this maximum, relative to that in the magnetic susceptibility around 70 K, speaks in favor of a more anisotropic triangular-lattice scenario for this compound than previously thought.

Gabaergic and opioid receptors mediate the facilitation of NaCl intake induced by alpha(2)-adrenergic activation in the lateral parabrachial nucleus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

C-2, N-dimethylbenzylamine cyclopalladated compounds: evaluation of cytotoxic, mutagenic and antitubercular activities

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cocaine effects on mouse incentive-learning and human addiction are linked to alpha 2 subunit-containing GABA(A) receptors

Because GABA(A) receptors containing alpha 2 subunits are highly represented in areas of the brain, such as nucleus accumbens (NAcc), frontal cortex, and amygdala, regions intimately involved in signaling motivation and reward, we hypothesized that manipulations of this receptor subtype would influence processing of rewards. Voltage-clamp recordings from NAcc medium spiny neurons of mice with alpha 2 gene deletion showed reduced synaptic GABA(A) receptor-mediated responses. Behaviorally, the deletion abolished cocaine`s ability to potentiate behaviors conditioned to rewards (conditioned reinforcement), and to support behavioral sensitization. In mice with a point mutation in the benzodiazepine binding pocket of alpha 2-GABA(A) receptors (alpha 2H101R), GABAergic neurotransmission in medium spiny neurons was identical to that of WT (i.e., the mutation was silent), but importantly, receptor function was now facilitated by the atypical benzodiazepine Ro 15-4513 (ethyl 8-amido-5,6-dihydro-5-methyl-6-oxo-4H-imidazo [1,5-a] [1,4] benzodiazepine-3-carboxylate). In alpha 2H101R, but not WT mice, Ro 15-4513 administered directly into the NAcc-stimulated locomotor activity, and when given systemically and repeatedly, induced behavioral sensitization. These data indicate that activation of alpha 2-GABA(A) receptors (most likely in NAcc) is both necessary and sufficient for behavioral sensitization. Consistent with a role of these receptors in addiction, we found specific markers and haplotypes of the GABRA2 gene to be associated with human cocaine addiction.

Highly stabilized alpha-NiCo(OH)(2) nanomaterials for high performance device application

Improving the charge capacity, electrochemical reversibility and stability of anode materials are main challenges for the development of Ni-based rechargeable batteries and devices. The combination of cobalt, as additive, and electrode material nanostructuration revealed a very promising approach for this purpose. The new alpha-NiCo mixed hydroxide based electrodes exhibited high specific charge/discharge capacity (355-714 C g(-1)) and outstanding structural stability, withstanding up to 700 redox cycles without any significant phase transformation, as confirmed by cyclic voltammetry, electrochemical quartz crystal microbalance and X-ray diffractometry. In short, the nanostructured alpha-NiCo mixed hydroxide materials possess superior electrochemical properties and stability, being strong candidates for application in high performance batteries and devices. (C) 2012 Elsevier B.V. All rights reserved.

2 H-NMR und Viskositätsuntersuchungen zum Studium der molekularen Dynamik unterkühlter Flüssigkeiten unter Hochdruck

In der vorliegenden Arbeit wurde die Druckabhängigkeit der molekularen Dynamik mittels 2H-NMR und Viskositätsmessungen untersucht. Für die Messungen wurde der niedermolekulare organische Glasbildner ortho-Terphenyl (OTP) ausgewählt, da dieser aufgrund einer Vielzahl vorliegender Arbeiten als Modellsubstanz angesehen werden kann. Daneben wurden auch Messungen an Salol durchgeführt.Die Untersuchungen erstreckten sich über einen weiten Druck- und Temperaturbereich ausgehend von der Schmelze bis weit in die unterkühlte Flüssigkeit. Dieser Bereich wurde aufgrund experimenteller Voraussetzungen immer durch eine Druckerhöhung erreicht.Beide Substanzen zeigten druckabhängig ein Verhalten, das dem der Temperaturvariation bei Normaldruck sehr ähnelt. Auf einer Zeitskala der molekularen Dynamik von 10E-9 s bis zu 10E+2 s wurde daher am Beispiel von OTP ein Druck-Temperatur-Zeit-Superpositionsprinzip diskutiert. Zudem konnte eine Temperatur-Dichte-Skalierung mit rho T-1/4 erfolgreich durchgeführt werden. Dies entspricht einem rein repulsiven Potentialverlauf mit rho -12±3 .Zur Entscheidung, ob die Verteilungsbreiten der mittleren Rotationskorrelationszeiten durch Druckvariation beeinflußt werden, wurden auch Ergebnisse anderer experimenteller Methoden herangezogen. Unter Hinzuziehung aller Meßergebnisse kann sowohl eine Temperatur- als auch Druckabhängigkeit der Verteilungsbreite bestätigt werden. Zur Auswertung von Viskositätsdaten wurde ein Verfahren vorgestellt, das eine quantitative Aussage über den Fragilitätsindex von unterkühlten Flüssigkeiten auch dann zuläßt, wenn die Messungen nicht bis zur Glasübergangstemperatur Tg durchgeführt werden. Die Auswertung der druckabhängigen Viskositätsdaten von OTP und Salol zeigt einen sehr differenzierten druckabhängigen Verlauf des Fragilitätsindexes für beide Glasbildner. OTP zeigt zunächst eine leichte Abnahme und danach wieder eine Zunahme des Fragilitätsindexes, dieses Ergebnis wird auch von Simulationsdaten, die der Literatur entnommen wurden, unterstützt. Salol hingegen zeigt zunächst eine deutliche Zunahme und danach eine Abnahme des Fragilitätsindexes. Das unterschiedliche Verhalten der beiden Glasbildner mit ähnlichem Fragilitätsindex bei Normaldruck wird auf die Wasserstoffbrückenbindungen innerhalb von Salol zurückgeführt.

Thin nanostructured crystalline TiO 2 films and their applications in solar cells

Research on thin nanostructured crystalline TiO2 films has attracted considerable interests because of their intriguing physical properties and potential applications in photovoltaics. Nanostructured TiO2 film plays an important role in the TiO2 based dye-sensitized solar cells because they act as a substrate for the adsorption of dye molecules and a matrix for the transportation of electrons as well. Thus they can influence the solar cell performance significantly. Consequently, the control of the morphology including the shape, size and size distribution of the TiO2 nanostructures is critical to tune and optimize the performance of the solar cells. To control the TiO2 morphology, a strategy using amphiphilic block copolymer as templating agent coupled with sol-gel chemistry has been applied. Especially, a good-poor solvent pair induced phase separation process has been developed to guide the microphase separation behavior of the block copolymers. The amphiphilic block copolymers used include polystyrene-block-poly (ethylene oxide) (PS-b-PEO), poly (methyl methacrylate)-block-poly (ethylene oxide) (PMMA-b-PEO), and poly (ethylene oxide)-block-polystyrene-block-poly (ethylene oxide) (PEO-b-PS-b-PEO). The block copolymer undergoes a good-poor-solvent pair induced phase separation in a mixed solution of 1, 4-dioxane or N, N’-dimethyl formamide (DMF), concentrated hydrochloric acid (HCl) and Titanium tetraisopropoxide (TTIP). Specifically, in the system of PS-b-PEO, a morphology phase diagram of the inorganic-copolymer composite films was mapped by adjusting the weight fractions among 1, 4-dioxane, HCl, and TTIP in solution. The amorphous TiO2 within the titania-block copolymer composite films was crystallized by calcination at temperatures above 400C, where the organic block copolymer was simultaneously burned away. This strategy is further extended to other amphiphilic block copolymers of PMMA-b-PEO and PEO-b-PS-b-PEO, where the morphology of TiO2 films can also be controlled. The local and long range structures of the titania films were investigated by the combination of imaging techniques (AFM, SEM) and x-ray scattering techniques (x-ray reflectivity and grazing incidence small-angle x-ray scattering). Based on the knowledge of the morphology control, the crystalline TiO2 nanostructured films with different morphologies were introduced into solid state dye-sensitized solar cells. It has been found that all of the morphologies help to improve the performance of the solar cells. Especially, clustered nanoparticles, worm-like structures, foam-like structures, large collapsed nanovesicles show more pronounced performance improvement than other morphologies such as nanowires, flakes, and nanogranulars.

OH- und HO 2-Radikale über dem tropischen Regenwald

Beständig werden Spurenstoffe in die Atmosphäre emittiert, die ihren Ursprung in biogenen oder anthropogenen Quellen haben. Daß es dennoch im allgemeinen nicht zu einer Anreicherung bis hin zu toxischen Konzentrationen kommt, liegt an dem Vermögen der Atmosphäre sich durch Oxidationsprozesse selbst zu reinigen. Eine wichtige Aufgabe kommt dabei dem Hydroxylradikal OH zu, welches tagsüber die Oxidationskapazität der Atmosphäre bestimmt. Hierbei spielen die tropischen Regionen mit einer der höchsten OH-Produktionsraten eine zentrale Rolle. Gleichzeitig sind die tropischen Regenwälder eine bedeutende globale Quelle für Kohlenwasserstoffe, die durch Reaktion mit OH-Radikalen dessen Konzentration und damit die Oxidationskapazität der Atmosphäre herabsetzen. Während der GABRIEL-Meßkampagne 2005 im äquatorialen Südamerika wurde der Einfluß der Regenwaldemissionen auf das HOx-Budget (HOx = OH+HO2) untersucht. Zu diesem Zweck wurde das Radikalmeßinstrument HORUS entwickelt. Im Rahmen dieser Arbeit wurden unterschiedliche Komponenten des Gerätes optimiert, der Meßaufbau ins Flugzeug integriert und Methoden zur Kalibrierung entwickelt. Bei der internationalen Vergleichskampagne HOxComp2005 zeigte HORUS seine Eignung zur Messung von troposphärischen OH- und HO2-Radikalen.rnrnDie durchgeführten HOx-Messungen während der GABRIEL-Meßkampagne sind die ersten ihrer Art, die über einem tropischen Regenwald stattgefunden haben. Im Gegensatz zu den Vorhersagen globaler Modelle wurden unerwartet hohe OH- und HO2-Konzentrationen in der planetaren Grenzschicht des tropischen Regenwalds beobachtet. Der Vergleich der berechneten OH-Produktions- und Verlustraten, die aus dem umfangreichen Datensatz von GABRIEL ermittelt wurden, zeigte, daß hierbei eine wichtige OH-Quelle unberücksichtigt blieb. Mit Hilfe des Boxmodells MECCA, in welchem die gemessenen Daten als Randbedingungen in die Simulationen eingingen, wurden die modellierten OH- und HO2- Konzentrationen im Gleichgewichtszustand den beobachteten Konzentrationen gegenübergestellt. Luftmassen der freien Troposphäre und der maritimen Grenzschicht zeigten eine gute Übereinstimmung zwischen Messung und Modell. Über dem tropischen Regenwald jedoch wurden die beobachteten HOx-Konzentrationen in der planetaren Grenzschicht durch das Modell, vor allem am Nachmittag, signifikant unterschätzt. Dabei lag die Diskrepanz zwischen den beobachteten und simulierten Konzentrationen bei einem mittleren Wert von OHobs/OHmod = 12.2 ± 3.5 und HO2obs/HO2mod = 4.1 ± 1.4. Die Abweichung zwischen Messung und Modell korrelieren hierbei mit der Isoprenkonzentration. Während für niedrige Isoprenmischungsverhältnisse, wie sie über dem Ozean oder in Höhen > 3 km vorherrschten, die Beobachtungen mit den Simulationen innerhalb eines Faktors 1.6±0.7 übereinstimmten, nahm die Unterschätzung durch das Modell für steigende Isoprenmischungsverhältnisse > 200 pptV über dem tropischen Regenwald zu.rnrnDer kondensierte chemische Mechanismus von MECCA wurde mit der ausführlichen Isoprenchemie des ”Master Chemical Mechanism“ überprüft, welches vergleichbare HOx-Konzentrationen lieferte. OH-Simulationen, durchgeführt mit der gemessenen HO2-Konzentration als zusätzliche Randbedingung, zeigten, daß die Konversion zwischen HO2 und OH innerhalb des Modells nicht ausreichend ist. Durch Vernachlässigung der gesamten Isoprenchemie konnte dagegen eine Übereinstimmung zwischen Modell und Messung erreicht werden. Eine OH-Quelle in der gleichen Größenordnung wie die OH-Senke durch Isopren, ist somit zur Beschreibung der beobachteten OH-Konzentration notwendig. Reaktionsmechanismen, die innerhalb der Isoprenchemie die gleiche Anzahl an OH-Radikalen erzeugen wie sie verbrauchen, könnten eine mögliche Ursache sein. Unterschiedliche zusätzliche Reaktionen wurden in die Isoprenabbaumechanismen des Modells implementiert, die zur Erhöhung der OH-Quellstärke führen sollten. Diese bewirkten eine Zunahme der simulierten HO2-Konzentrationen um einen maximalen Faktor von 5 für OH und 2 für HO2. Es wird eine OH-Zyklierungswahrscheinlichkeit r von bis zu 94% gefordert, wie sie für die GABRIEL-Messungen erreicht wurde. Die geringe OH-Zyklierungswahrscheinlichkeit von 38% des Modells zeigte, daß wichtige Zyklierungsvorgänge im chemischen Mechanismus bislang nicht berücksichtigt werden. Zusätzliche Zyklierungsreaktionen innerhalb des Isoprenmechanismus, die auch unter niedrigen NO-Konzentrationen zur Rückbildung von OHRadikalen führen, könnten eine Erklärung für die über dem Regenwald beobachteten hohen OH-Konzentration liefern.rn

Produzione di 2-metilfurano da furfurale in fase gas con metanolo come reagente di H-transfer

La furfurale (FU) rappresenta una delle più importanti molecole piattaforma per la produzione di biocarburanti e prodotti chimici a partire dalle biomasse. L’elevato interesse che si nutre nei confronti di tale molecola è giustificato dall’ampio spettro di reazioni che possono essere condotte su di essa al fine di ottenere prodotti di interesse industriale, quali, ad esempio, il furfuril alcool (FAL) e il metilfurano (MFU). I processi attualmente utilizzati per la produzione di tali molecole usano H2 e costosi catalizzatori a base di metalli nobili. Un’alternativa interessante a questi processi è quella che prevede di utilizzare un alcool come fonte di idrogeno tramite un processo di H-transfer su catalizzatori a base di ossidi misti. Lo scopo di questa tesi è stata quindi la sintesi e lo studio delle proprietà catalitiche del sistema FeVO4, nella reazione di riduzione in fase gas della furfurale, usando metanolo come agente di H-transfer. Il catalizzatore è stato ottenuto mediante coprecipitazione dei precursori di Fe e V e successivamente calcinato. La caratterizzazione Raman e XRD ha confermato la bontà della procedura di sintesi. I risultati dei test catalitici hanno mostrato che nelle condizioni ottimali il sistema è altamente selettivo nella riduzione della FU a MFU, mentre i prodotti secondari sono 2-vinilfurano e 2,5-dimetilfurano. A causa della deposizione di specie carboniose sulla superficie del catalizzatore, la conversione della FU tende a diminuire col passare delle ore di reazione. Tuttavia il sistema risulta rigenerabile grazie ad un trattamento in aria a 450°C. Inoltre l’analisi XRD dei catalizzatori scaricati ha mostrato che l’ossido misto subisce un processo di riduzione a seguito dell’interazioni con il metanolo, in quanto la stechiometria Fe:V:O passa dal valore di 1:1:4 a valori di 1:1:3. Sulla base di questi dati il processo di produzione del MFU è stato ulteriormente ottimizzato effettuando un pretrattamento riduttivo del catalizzatore prima dei test catalitici.

Clearance of p-cresol sulfate and β-2-microglobulin from dialysate by commercially available sorbent technology

Dialysate regeneration by sorbents is an alternative to conventional single-pass dialysis. Little is known about the capacity of sorbents to clear dialysate of “middle molecules” and protein-bound uremic toxins. We studied p-cresol sulfate (PCS) and β-2-microglobulin (β2M) removal from dialysate by a sorbent: 1. PCS (40 mg PCS dissolved in 4 L of fresh dialysate) was recirculated through a sorbent cartridge (SORB Technology, Inc.) for analysis of PCS removal. 2. Spent peritoneal dialysate was recirculated on the “blood” side of a high-flux dialyzer. On the “dialysate” side of the membrane, bicarbonate dialysate was recirculated through a sorbent cartridge. β2M was measured in both streams. Two results are of particular importance for the use of regenerated fluid in chronic dialysis: 1. PCS was virtually completely removed from the dialysate. On average, PCS concentration was reduced to 1.4% of the starting concentration after 60 minutes. PCS extraction across the sorbent was nearly complete at any time. 2. β2M was on average reduced to 14.3% of the starting concentration after 60 minutes. Postsorbent concentrations were consistently below the validated range of the test method. We conclude that PCS and β2M are efficiently removed from the dialysate by commercially available sorbent technology. Spent peritoneal dialysis fluid can be cleared of β2M when circulated against sorbent-regenerated dialysate using a high-flux membrane.

Comparative stability studies of poly(2-methyl-2-oxazoline) and poly(ethylene glycol) brush coatings

Non-fouling surfaces that resist non-specific adsorption of proteins, bacteria, and higher organisms are of particular interest in diverse applications ranging from marine coatings to diagnostic devices and biomedical implants. Poly(ethylene glycol) (PEG) is the most frequently used polymer to impart surfaces with such non-fouling properties. Nevertheless, limitations in PEG stability have stimulated research on alternative polymers that are potentially more stable than PEG. Among them, we previously investigated poly(2-methyl-2-oxazoline) (PMOXA), a peptidomimetic polymer, and found that PMOXA shows excellent anti-fouling properties. Here, we compare the stability of films self-assembled from graft copolymers exposing a dense brush layer of PEG and PMOXA side chains, respectively, in physiological and oxidative media. Before media exposure both film types prevented the adsorption of full serum proteins to below the detection limit of optical waveguide in situ measurements. Before and after media exposure for up to 2 weeks, the total film thickness, chemical composition, and total adsorbed mass of the films were quantified using variable angle spectroscopic ellipsometry (VASE), X-ray photoelectron spectroscopy (XPS), and optical waveguide lightmode spectroscopy (OWLS), respectively. We found (i) that PMOXA graft copolymer films were significantly more stable than PEG graft copolymer films and kept their protein-repellent properties under all investigated conditions and (ii) that film degradation was due to side chain degradation rather than due to copolymer desorption.

Factors associated with the incidence of type 2 diabetes mellitus in HIV-infected participants in the Swiss HIV Cohort Study

BACKGROUND: Human immunodeficiency virus (HIV)-infected persons may be at increased risk for developing type 2 diabetes mellitus because of viral coinfection and adverse effects of treatment. METHODS: We studied associations of new-onset diabetes mellitus with hepatitis B virus and hepatitis C virus coinfections and antiretroviral therapy in participants in the Swiss HIV Cohort Study, using Poisson regression. RESULTS: A total of 123 of 6513 persons experienced diabetes mellitus during 27,798 person-years of follow-up (PYFU), resulting in an incidence of 4.4 cases per 1000 PYFU (95% confidence interval [CI], 3.7-5.3 cases per 1000 PYFU). An increased incidence rate ratio (IRR) was found for male subjects (IRR, 2.5; 95% CI, 1.5-4.2), older age (IRR for subjects >60 years old, 4.3; 95% CI, 2.3-8.2), black (IRR, 2.1; 95% CI, 1.1-4.0) and Asian (IRR, 4.9; 95% CI, 2.2-10.9) ethnicity, Centers for Disease Control and Prevention disease stage C (IRR, 1.6; 95% CI, 1.04-2.4), and obesity (IRR, 4.7; 95% CI, 3.1-7.0), but results for hepatitis C virus infection or active hepatitis B virus infection were inconclusive. Strong associations were found for current treatment with nucleoside reverse-transcriptase inhibitors (IRR, 2.22; 95% CI, 1.11-4.45), nucleoside reverse-transcriptase inhibitors plus protease inhibitors (IRR, 2.48; 95% CI, 1.42-4.31), and nucleoside reverse-transcriptase inhibitors plus protease inhibitors and nonnucleoside reverse-transcriptase inhibitors (IRR, 3.25; 95% CI, 1.59-6.67) but were not found for treatment with nucleoside reverse-transcriptase inhibitors plus nonnucleoside reverse-transcriptase inhibitors (IRR, 1.47; 95% CI, 0.77-2.82). CONCLUSIONS: In addition to traditional risk factors, current treatment with protease inhibitor- and nucleoside reverse-transcriptase inhibitor-containing regimens was associated with the risk of developing type 2 diabetes mellitus. Our study did not find a significant association between viral hepatitis infection and risk of incident diabetes.

When to start antiretroviral therapy in children aged 2-5 years: a collaborative causal modelling analysis of cohort studies from southern Africa

BACKGROUND There is limited evidence on the optimal timing of antiretroviral therapy (ART) initiation in children 2-5 y of age. We conducted a causal modelling analysis using the International Epidemiologic Databases to Evaluate AIDS-Southern Africa (IeDEA-SA) collaborative dataset to determine the difference in mortality when starting ART in children aged 2-5 y immediately (irrespective of CD4 criteria), as recommended in the World Health Organization (WHO) 2013 guidelines, compared to deferring to lower CD4 thresholds, for example, the WHO 2010 recommended threshold of CD4 count <750 cells/mm(3) or CD4 percentage (CD4%) <25%. METHODS AND FINDINGS ART-naïve children enrolling in HIV care at IeDEA-SA sites who were between 24 and 59 mo of age at first visit and with ≥1 visit prior to ART initiation and ≥1 follow-up visit were included. We estimated mortality for ART initiation at different CD4 thresholds for up to 3 y using g-computation, adjusting for measured time-dependent confounding of CD4 percent, CD4 count, and weight-for-age z-score. Confidence intervals were constructed using bootstrapping. The median (first; third quartile) age at first visit of 2,934 children (51% male) included in the analysis was 3.3 y (2.6; 4.1), with a median (first; third quartile) CD4 count of 592 cells/mm(3) (356; 895) and median (first; third quartile) CD4% of 16% (10%; 23%). The estimated cumulative mortality after 3 y for ART initiation at different CD4 thresholds ranged from 3.4% (95% CI: 2.1-6.5) (no ART) to 2.1% (95% CI: 1.3%-3.5%) (ART irrespective of CD4 value). Estimated mortality was overall higher when initiating ART at lower CD4 values or not at all. There was no mortality difference between starting ART immediately, irrespective of CD4 value, and ART initiation at the WHO 2010 recommended threshold of CD4 count <750 cells/mm(3) or CD4% <25%, with mortality estimates of 2.1% (95% CI: 1.3%-3.5%) and 2.2% (95% CI: 1.4%-3.5%) after 3 y, respectively. The analysis was limited by loss to follow-up and the unavailability of WHO staging data. CONCLUSIONS The results indicate no mortality difference for up to 3 y between ART initiation irrespective of CD4 value and ART initiation at a threshold of CD4 count <750 cells/mm(3) or CD4% <25%, but there are overall higher point estimates for mortality when ART is initiated at lower CD4 values. Please see later in the article for the Editors' Summary.

"Eventless" InsP 3 -dependent SR-Ca 2+ Release Affecting Atrial Ca 2+ Sparks

Augmented inositol 1,4,5-trisphosphate receptor (InsP3R) function has been linked to a variety of cardiac pathologies, including cardiac arrhythmia. The contribution of inositol 1,4,5-trisphosphate-induced Ca2+ release (IP3ICR) in excitation-contraction coupling (ECC) under physiological conditions, as well as under cellular remodelling, remains controversial. Here we test the hypothesis that local IP3ICR directly affects ryanodine receptor (RyR) function and subsequent Ca2+-induced Ca2+ release in atrial myocytes. IP3ICR was evoked by UV-flash photolysis of caged InsP3 under whole-cell configuration of the voltage-clamp technique in atrial myocytes isolated from C57/BL6 mice. Photolytic release of InsP3 was accompanied by a significant increase in the Ca2+ release event frequency (4.14±0.72 vs. 6.20±0.76 events (100 μm)−1 s−1). These individual photolytically triggered Ca2+ release events were identified as Ca2+ sparks, which originated from RyR openings. This was verified by Ca2+ spark analysis and pharmacological separation between RyR and InsP3R-dependent sarcoplasmic reticulum (SR)-Ca2+ release (2-aminoethoxydiphenyl borate, xestospongin C, tetracaine). Significant SR-Ca2+ flux but eventless SR-Ca2+ release through InsP3R were characterized using SR-Ca2+ leak/SR-Ca2+ load measurements. These results strongly support the idea that IP3ICR can effectively modulate RyR openings and Ca2+ spark probability. We conclude that eventless and highly efficient InsP3-dependent SR-Ca2+ flux is the main mechanism of functional cross-talk between InsP3Rs and RyRs, which may be an important factor in the modulation of ECC sensitivity.