Editor i disseny d'interiors

L’OpenGL és un motor 3D que s’utilitza com a lligam entre el software i el hardware gràfic. Actualment és una de les tecnologies més utilitzades en el disseny d’aplicacions 3D. El treball està realitzat amb el programa Visual C++, que és el més recomanat per al desenvolupament d’aplicacions OpenGL. L’objectiu principal d’aquest treball és aprendre a programar amb aquest tipus de tecnologia que no hem estudiat durant el període de carrera. Un altre objectiu del treball era trobar una funció útil i pràctica per a l’aplicació i ens vam decantar per a realitzar un editor d’habitacions per un botiga o empresa de mobles. L’usuari pot de forma molt ràpida i senzilla dibuixar com és l’habitació que vol decorar de forma totalment personalitzada. El programa li generarà l’habitació en tres dimensions i amb els materials que s’han escollit (terra, parets, portes…). Després pot editar-hi mobles personalitzats o pertanyents a la llibreria del programa. El programa incorpora també una base de dades per a l’empresa que ens portarà la gestió de clients, habitacions, textures i mobles (permet ampliar la llibreria del programa). Un cop acabada l’habitació el programa ens hi permet fer una visita de forma interactiva i generar-ne la factura entre altres funcions. La conclusió principal després d’haver acabat aquest projecte, és que a part d’haver après OpenGL, hem aconseguit realitzar una aplicació molt pràctica de cares al disseny d’interiorisme.

Gestió de pressupostos per a la construcció

En els últims anys el sector de la construcció ha experimentat un creixement exponencial. Aquest creixement ha repercutit sobre molts aspectes: des de la necessitat de tenir més personal a les obres, la implantació d’unes oficines per a poder gestionar la compatibilitat i portar un control sobre les obres fins a la necessitat d’haver de disposar de programes informàtics específics que ajudin a realitzar la feina de la manera més còmode i àgil possible. El projecte que s’ha dut a terme consisteix a cobrir una d’aquestes necessitats, que és la de la gestió dels pressupostos en les diferents obres que els constructors realitzen. Utilitza la base de dades de l’ITEC (institut de Tecnologia de la Construcció de Catalunya) sobre la qual treballen la immensa majoria dels arquitectes quan dissenyen les obres, però també permet entrar les pròpies dades que el constructor vulgui. L’usuari de l’aplicació podrà fer pressupostos per obres de nova construcció, reformes ... agrupant cada una d’elles per capítols. Aquests capítols els podem entendre com les diferents fases a dur a terme, per exemple: la construcció dels fonaments, l’aixecament de les parets o fer la teulada. Dins dels capítols hi trobem les partides, que és un conjunt de materials i hores de feina i maquinària per a dur a terme una part de l’obra, com per exemple seria fer un envà de separació entre habitacions. En aquest cas hi tindríem els diferents materials que necessitaríem, totxanes, morter; les hores de manobre necessàries per aixecar-la, el transport de tot el material fins a l’obra... Tots aquests paràmetres (materials, hores, transport...) s’anomenen articles i van inclosos a dins de les partides. Aquesta aplicació està dissenyada per funcionar en un entorn client/servidor, utilitzant com a servidor un Linux OpenSuse 10.2 i com a clients estacions de treball amb Windows XP, tot i que també podríem utilitzar d’altres versions dels sistemes operatius de Microsoft. L’entorn de desenvolupament utilitzat és el del llenguatge FDS , el qual ja porta integrat un gestor de fitxers que és el que es farà servir.

Arinakattilan lämmönsiirron laskentamallin kehittäminen

Kattilalaitosten polttoaineen syötössä ilmenevät häiriöt ja biopolttoaineiden laatuvaihtelut aiheuttavat epävakaata palamista ja tekevät prosessin hallinnasta vaikeampaa. Polttoaineen laatuvaihtelut vaikuttavat koko prosessiin ja näkyvät lopulta myös höyryntuotannossa. Kompensoinnilla pyritään estämään häiriöiden suuret vaikutukset höyryn tuotantoon. Tarkoituksena on saada kattilan toiminta ja tehon tuotanto tasaisemmaksi ja helpommin hallittavaksi. Tässä diplomityössä tarkastellaan polttoaineen ominaisuuksien, säteilylämmönsiirron sekä säätöjen vaikutusta toisiinsa ja merkitystä kattilan toiminnan kannalta. Työssä muodostetaan säteilylämmönsiirron laskentamalli arinakattilan tulipesälle käyttäen hyväksi hyvin sekoittuneen tulipesän menetelmää. Menetelmällä voidaan määrittääsavukaasujen keskimääräinen lämpötila tulipesässä, lämpövirta tulipesän seiniin tai poltossa vapautuva lämpöteho. Mallin avulla voidaan paremmin ymmärtää prosessin käyttäytymistä polttoaineen laadun muuttuessa sekä helpottaa ja nopeuttaa kattilan käyttäytymisen ennustamista. Laskentamalli tehtiin Excel –laskentaohjelmaan, jossa se testataan. Verifioinnin jälkeen malli on tarkoitus siirtää toimimaan apros –simulointiympäristöön.

Construção de câmara de luz ultravioleta para fotopolimerização de fases estacionárias monolíticas

The assembly of a photochemical reactor with six fluorescent lamps, used for photopolymerizations is described. This chamber presents a mobile support, allowing the placement of samples at different heights and a safety lock that interrupts the radiation, if it is opened during operation. The mirrored internal walls avoid the dispersion and non-uniform distribution of light. There is no high heating because the own character of the used lamps. All parts could be purchased in commerce with less than U$ 150,00. This reactor was successfully used for monolithic stationary phase photopolymerization.

Pigmentos de pinturas rupestres pré-históricas do sítio Letreiro do Quinto, Pedro II, Piauí, Brasil

The Letreiro do Quinto rock shelter is located in the rural area of the city of Pedro II, Piauí, Brazil. The sandstone walls of the shelter are covered with prehistoric rupestrian paintings, painted in patterns of yellow and light and dark red hues. The chemical-mineralogical characterization of the prehistoric pigments was made with energy dispersive spectroscopy, scanning electron microscopy, energy dispersive X-ray fluorescence and 57Fe transmission Mössbauer spectroscopy at 110 K. Results confirm the occurrence of hematite- and goethite-rich ochres and also that the pigment layers are indeed made of a mixture of clay minerals mixed with iron oxides.

Resultados científicos do cruzeiro do "Baependi" e do "Vega" à Ilha da Trindade: contribuição para o conhecimento da plataforma insular da Ilha da Trindade

The oceanographic work realized during 10 days in the surroundings of the eruptive island of Trindade, 20º30'36" lat. S - 29º19'26" long. W, had as principal aim the determination of the insular plateau, whose knowledge was very insufficient. Thus were established some oceanographic stations and sounding lines were realized by means of an echobathymeter whose responses were initially verified with mechanical soundings obtaneid by means of a Thomson sounder. The insular plateau is very narrow and exhibits a sudden fall between the 100 and 120 m. depth line at 740 m. - 2950 m. from the coast. Its greatest depth is of 108,30 m. and its mean inclination is of 8,12%. The plateau of the island of Trindade is separated from that of the neighbouring group of Martim Yaz by great depths. The bottoms are rocky near the coast, the blocks having been produced by the rupture of the magmatic mass of the island. Further away from the coast, the size of the rocks gradually diminishes up to the fine sand thickness. In the litoral zone there are abundant tufts of living Lithothamnion with a rich associated flora and fauna, which partly covers the rocks themselves. Further off at sea, the spheres of the dead alga with its commensals are cimented together by sedimentation. The spheres are further broken up and become an integrating part of the sand. The results of the physical and chemical analyses of the sand bottoms are shown in tables 2 and 3. The coast is either of abrupt rocky walls falling down to sea level, or of shores, made of pebbles or of sand. Anyhow, there are frequently Lithothamnion terraces slightly inclinated towards the bottom (chemical analysis table 1).

Cuticular and Suberin Polymers of Edible Plants. Analysis by Gas Chromatographic-Mass Spectrometric and Solid State Spectroscopic Methods

Cutin and suberin are structural and protective polymers of plant surfaces. The epidermal cells of the aerial parts of plants are covered with an extracellular cuticular layer, which consists of polyester cutin, highly resistant cutan, cuticular waxes and polysaccharides which link the layer to the epidermal cells. A similar protective layer is formed by a polyaromatic-polyaliphatic biopolymer suberin, which is present particularly in the cell walls of the phellem layer of periderm of the underground parts of plants (e.g. roots and tubers) and the bark of trees. In addition, suberization is also a major factor in wound healing and wound periderm formation regardless of the plants’ tissue. Knowledge of the composition and functions of cuticular and suberin polymers is important for understanding the physiological properties for the plants and for nutritional quality when these plants are consumed as foods. The aims of the practical work were to assess the chemical composition of cuticular polymers of several northern berries and seeds and suberin of two varieties of potatoes. Cutin and suberin were studied as isolated polymers and further after depolymerization as soluble monomers and solid residues. Chemical and enzymatic depolymerization techniques were compared and a new chemical depolymerization method was developed. Gas chromatographic analysis with mass spectrometric detection (GC-MS) was used to assess the monomer compositions. Polymer investigations were conducted with solid state carbon-13 cross polarization magic angle spinning nuclear magnetic resonance spectroscopy (13C CP-MAS NMR), Fourier transform infrared spectroscopy (FTIR) and microscopic analysis. Furthermore, the development of suberin over one year of post-harvest storage was investigated and the cuticular layers from berries grown in the North and South of Finland were compared. The results show that the amounts of isolated cuticular layers and cutin monomers, as well as monomeric compositions vary greatly between the berries. The monomer composition of seeds was found to differ from the corresponding berry peel monomers. The berry cutin monomers were composed mostly of long-chain aliphatic ω-hydroxy acids, with various mid-chain functionalities (double-bonds, epoxy, hydroxy and keto groups). Substituted α,ω-diacids predominated over ω-hydroxy acids in potato suberin monomers and slight differences were found between the varieties. The newly-developed closed tube chemical method was found to be suitable for cutin and suberin analysis and preferred over the solvent-consuming and laborious reflux method. Enzymatic hydrolysis with cutinase was less effective than chemical methanolysis and showed specificity towards α,ω-diacid bonds. According to ₁₃C CP-MAS NMR and FTIR, the depolymerization residues contained significant amounts of aromatic structures, polysaccharides and possible cutan-type aliphatic moieties. Cultivation location seems to have effect on cuticular composition. The materials studied contained significant amounts of different types of biopolymers that could be utilized for several purposes with or without further processing. The importance of the so-called waste material from industrial processes of berries and potatoes as a source of either dietary fiber or specialty chemicals should be further investigated in detail. The evident impact of cuticular and suberin polymers, among other fiber components, on human health should be investigated in clinical trials. These by-product materials may be used as value-added fiber fractions in the food industry and as raw materials for specialty chemicals such as lubricants and emulsifiers, or as building blocks for novel polymers.

Den vårdande och helande bilden: möten med bildkonst i vårdandets värld

Denna vårdvetenskapliga avhandling syftar till att avtäcka och belysa en vårdande och helande dimension vid existentiellt lidande patienters möten med bildkonst inom vårdkontext. Kunskapssökandet sker i två studier. Den första (studie I) är en ikonografi sk tolkning av konstnären Matthias Grünewalds (ca 1460–1528) senmedeltida altarskåpsmålningar. I studien uttolkas lidandets uttryck och narrativa budskap samt symboliska gestaltningar av vårdande och helande i valda delar av detta s.k. Isenheimaltares bildprogram. Tolkningen utgår från rekonstruktionen av altarskåpets ursprungskontext, det medeltida Isenheimklostret, där svårt sjuka och döende patienter vårdades. I studie två (II) fortsätter sökandet i den moderna hospicevårdens kontext med hjälp av en kvalitativ intervjustudie som utforskar patienters meningsskapande vid möten med självvald bildkonst (oljemålningar och akvareller av fi nländska konstnärer som donerats till det sjukhus där intervjustudien gjordes). Forskningsansatsen är inspirerad av Hans-Georg Gadamers (1901–2002) hermeneutik. Vidare används några nyare tolkningsteoretiska ansatser inom bildkonstens område. Forskningens tolkningsresultat visar att bildkonsten har potentialer såväl på ett miljöestetiskt plan som på en djupare individuell symbolnivå. Som designkomponent i vårdmiljöns rumsliga gestaltning bygger bildkonsten in estetiska, etiska och andliga kvaliteter utifrån tidsmässiga och kulturella koder. I den medeltida klostervårdens kontext sammanföll bildkonstens dekorativa betydelse med andliga och helande syften. När det gäller självvalda konstverk i den moderna vårdkontexten bidrar de till det enskilda patientrummets atmosfär på ett unikt sätt utifrån patientens personlighet och behov. På en fördjupad mötesnivå, i samspel med bildens symboliska funktion, sker en inlevelsemässig förfl yttning in i bildens värld. Betraktarens inlevelse aktiveras till en transcenderande rörelse som går bortom det faktiska rummets och den reella tidens gränser. Vid resor i konstens bildvärld spelas minnesvärda händelser upp från det förgångna, men även framtiden kommer betraktaren till mötes. I en existentiell livssituation söker människan i konstverkets bildinnehåll efter symbolisk mening som kan ge svar på lidandets frågor. Bilderna iscensätter då helande motbilder som utgör korrektiv i symboliska former när olika existentiella förluster hotar. När livet förbleknats av sjukdom besvarar bildvärlden den lidandes blick med lysande violer som blommar upp, ger livskraft och bekräftar personens värdighet mitt i det förvissnande människolivet. När ångest och otrygghet nalkas inbjuds betraktaren till besök i landskap som utvidgar sjukhusrummets väggar mot hemgårdens trygghet. Där livet hotas av förgänglighet tar bildvärlden människan med sig till naturens eviga återfödelse. Upplevelsen av att vara delaktig i ett större och heligt sammanhang öppnar vägen ut ur lidandets avskurenhet. I medeltidens vårdkontext erbjöd den sakrala bilden en kollektiv och helande Symbolon som genom sin representationskraft synliggjorde det osynliga. Vid bildmöten i den moderna hospicevårdens kontext var det naturteman som gläntade på dörren till ”det hemliga rummet i djupet av hjärtat”. Forskningen antyder att även om meningsskapandet i ett bildmöte är avhängigt tidsepok, betraktarens förförståelse och kulturella kontext samt typen av bilder kan bildsymboliken, generellt förstådd som den saknade formen eller det saknade livssammanhanget, framvisa en helande och hoppingivande ordning i lidandets kaos.

Methods for construction and analysis of computational models in systems biology : applications to the modelling of the heat shock response and the self-assembly of intermediate filaments

Systems biology is a new, emerging and rapidly developing, multidisciplinary research field that aims to study biochemical and biological systems from a holistic perspective, with the goal of providing a comprehensive, system- level understanding of cellular behaviour. In this way, it addresses one of the greatest challenges faced by contemporary biology, which is to compre- hend the function of complex biological systems. Systems biology combines various methods that originate from scientific disciplines such as molecu- lar biology, chemistry, engineering sciences, mathematics, computer science and systems theory. Systems biology, unlike “traditional” biology, focuses on high-level concepts such as: network, component, robustness, efficiency, control, regulation, hierarchical design, synchronization, concurrency, and many others. The very terminology of systems biology is “foreign” to “tra- ditional” biology, marks its drastic shift in the research paradigm and it indicates close linkage of systems biology to computer science. One of the basic tools utilized in systems biology is the mathematical modelling of life processes tightly linked to experimental practice. The stud- ies contained in this thesis revolve around a number of challenges commonly encountered in the computational modelling in systems biology. The re- search comprises of the development and application of a broad range of methods originating in the fields of computer science and mathematics for construction and analysis of computational models in systems biology. In particular, the performed research is setup in the context of two biolog- ical phenomena chosen as modelling case studies: 1) the eukaryotic heat shock response and 2) the in vitro self-assembly of intermediate filaments, one of the main constituents of the cytoskeleton. The range of presented approaches spans from heuristic, through numerical and statistical to ana- lytical methods applied in the effort to formally describe and analyse the two biological processes. We notice however, that although applied to cer- tain case studies, the presented methods are not limited to them and can be utilized in the analysis of other biological mechanisms as well as com- plex systems in general. The full range of developed and applied modelling techniques as well as model analysis methodologies constitutes a rich mod- elling framework. Moreover, the presentation of the developed methods, their application to the two case studies and the discussions concerning their potentials and limitations point to the difficulties and challenges one encounters in computational modelling of biological systems. The problems of model identifiability, model comparison, model refinement, model inte- gration and extension, choice of the proper modelling framework and level of abstraction, or the choice of the proper scope of the model run through this thesis.

Miten käy Itämeren?

Kirjallisuusarvostelu

Morphometric Study of Cerebral Arterioles in CADASIL

Cerebral autosomal dominant arteriopathy with subcortical infarcts and leukoencephalopathy(CADASIL) is the most common hereditary small vessel disease (SVD) leading to vascular dementia. The cause of the disease is mutations in NOTCH3 gene located at chromosome 19p13.1. The gene defect results in accumulation of granular osmiophilic material and extracellular domain of NOTCH3 at vascular smooth muscle cells (VSMCs) with subsequent degeneration of VSMCs. This arteriopathy leads to white matter (WM) rarefaction and multiple lacunar infarctions in both WM and deep grey matter (GM) visible in magnetic resonance imaging. This thesis is focused on the quantitative morphometric analysis of the stenosis and fibrosis in arterioles of the frontal cerebral WM, cortical GM and deep GM (lenticular nucleus (LN), i.e. putamen and globus pallidus). It was performed by assessing four indicators of arteriolar stenosis and fibrosis: (1) diameter of arteriolar lumen, (2) thickness of arteriolar wall, (3) external diameter of arterioles and (4) sclerotic index. These parameters were assessed (a) in 5 elderly CADASIL patients with the mean age of onset 47 years and of death 63 years, (b) in a 32-year-old young CADASIL patient with the first ischemic episode at the age of 29 years and (c) a very old CADASIL patient aged 95 years, who suffered the first stroke at the age of 71 years. These measurements were compared with age-matched controls without stroke, dementia, hypertension, and cerebral amyloid angiopathy. Morphometric analyses disclosed that in all age groups of CADASIL patients compared to corresponding controls there was significant narrowing of arteriolar lumen (stenosis) and fibrotic thickening of the walls (fibrosis) in the WM arterioles, although the significance of stenosis in the very old patient was marginal. In the LN arterioles there was only significant fibrosis without stenosis. These results suggest that the ischemic lesions and lacunar infarcts in the cerebral WM are mainly attributable to the stenosis of arterioles, whereas those in the LN are probably mainly due to hemodynamic changes of the cerebral blood flow. In conclusion: The SVD of CADASIL is characterized by narrowing of lumina and fibrotic thickening of walls predominantly in the cerebral WM arterioles. On the other hand, in the LN the ischemic lesions and lacunar infarcts are most probably hemodynamic due to impaired autoregulation caused by the rigidity of fibrotic arterioles. The pathological cerebral arteriolar alterations begin to develop already at a relatively young age but the onset may be delayed to a remarkably old age. This underlines the well known great variability in the clinical picture of CADASIL. The very late onset of CADASIL may cause its underdiagnosis, because the strokes are common in the elderly and are attributed to common risk factors.

Wood as a model material for medical biomaterials. In vivo and in vitro studies with bone and Betula pubescens Ehrh

Novel biomaterials are needed to fill the demand of tailored bone substitutes required by an ever‐expanding array of surgical procedures and techniques. Wood, a natural fiber composite, modified with heat treatment to alter its composition, may provide a novel approach to the further development of hierarchically structured biomaterials. The suitability of wood as a model biomaterial as well as the effects of heat treatment on the osteoconductivity of wood was studied by placing untreated and heat‐treated (at 220 C , 200 degrees and 140 degrees for 2 h) birch implants (size 4 x 7mm) into drill cavities in the distal femur of rabbits. The follow‐up period was 4, 8 and 20 weeks in all in vivo experiments. The flexural properties of wood as well as dimensional changes and hydroxyl apatite formation on the surface of wood (untreated, 140 degrees C and 200 degrees C heat‐treated wood) were tested using 3‐point bending and compression tests and immersion in simulated body fluid. The effect of premeasurement grinding and the effect of heat treatment on the surface roughness and contour of wood were tested with contact stylus and non‐contact profilometry. The effects of heat treatment of wood on its interactions with biological fluids was assessed using two different test media and real human blood in liquid penetration tests. The results of the in vivo experiments showed implanted wood to be well tolerated, with no implants rejected due to foreign body reactions. Heat treatment had significant effects on the biocompatibility of wood, allowing host bone to grow into tight contact with the implant, with occasional bone ingrowth into the channels of the wood implant. The results of the liquid immersion experiments showed hydroxyl apatite formation only in the most extensively heat‐treated wood specimens, which supported the results of the in vivo experiments. Parallel conclusions could be drawn based on the results of the liquid penetration test where human blood had the most favorable interaction with the most extensively heat‐treated wood of the compared materials (untreated, 140 degrees C and 200 degrees C heat‐treated wood). The increasing biocompatibility was inferred to result mainly from changes in the chemical composition of wood induced by the heat treatment, namely the altered arrangement and concentrations of functional chemical groups. However, the influence of microscopic changes in the cell walls, surface roughness and contour cannot be totally excluded. The heat treatment was hypothesized to produce a functional change in the liquid distribution within wood, which could have biological relevance. It was concluded that the highly evolved hierarchical anatomy of wood could yield information for the future development of bulk bone substitutes according to the ideology of bioinspiration. Furthermore, the results of the biomechanical tests established that heat treatment alters various biologically relevant mechanical properties of wood, thus expanding the possibilities of wood as a model material, which could include e.g. scaffold applications, bulk bone applications and serving as a tool for both mechanical testing and for further development of synthetic fiber reinforced composites.

PYRENE MORPHOLOGY OF THREE SPECIES OF Byrsonima Rich. ex Kunth (Malpighiaceae)1

ABSTRACT The species of the genus Byrsonima Rich. ex Kunth are of great medicinal and economic importance, but they are still poorly studied with respect to their propagules. This study describes, illustrates and comparse morphological aspects of the pyrenes of Byrsonima crassifolia (L.) Kunth, Byrsonima verbascifolia (L.) DC. and Byrsonima coccolobifolia Kunth occurring in areas of savannah of Boa Vista, Roraima. The pyrenes are globoid, obovoid to ovoid, with endocarp dark brown in color, with a corrugated and reticulate surface and corneous consistency. They possess distinctly septate locules with or without seeds, the outer wall of which are dark brown in color with corneous consistency and thin black inner walls also with corneous consistency. The number of locules and seeds per pyrene among the species varies. The seeds are exalbuminous, globoid, obovoid to ovoid, with a thin, smooth integument and are light-brown in color. They have radicular lobes and hypostasis. The embryo is continuous and axial with cylindrical spirally rolled cotyledons. The diameter of pyrenes of Byrsonima crassifolia is greater than in the other two species. The pyrenes of B. coccolobifolia are longer and heavier, while those of B. verbascifolia are lighter and the seeds have greater lengths, widths and thickness compared to the other two species studied. The three species have similar morphologies, differing in the size and weight of pyrenes and seeds.

Studies in offset ink setting

The offset printing process is complex and involves the meeting of two essentially complex materials, printing ink and paper, upon which the final product is formed. It can therefore be expected that a multitude of chemical and physical interactions and mechanisms take place at the ink-paper interface. Interactions between ink and paper are of interest to both the papermakers and ink producers, as they wish to achieve better quality in the final product. The objective of this work is to clarify the combined influence of paper coating structure, printing ink and fountain solution on ink setting and the problems related to ink setting. A further aim is to identify the mechanisms that influence ink setting problems, and to be able to counteract them by changing properties of the coating layer or by changing the properties of the ink. The work carried out for this thesis included use of many techniques ranging from standard paper and printability tests to advanced optical techniques for detection of ink filaments during ink levelling. Modern imaging methods were applied for assessment of ink filament remain sizes and distribution of ink components inside pigment coating layers. Gravimetric filtration method and assessment of print rub using Ink-Surface-Interaction-Tester (ISIT) were utilized to study the influence of ink properties on ink setting. The chemical interactions were observed with the help of modified thin layer chromatography and contact angle measurements using both conventional and high speed imaging. The results of the papers in this thesis link the press operational parameters to filament sizes and show the influence of these parameters to filament size distribution. The relative importance between the press operation parameters was shown to vary. The size distribution of filaments is important in predicting the ink setting behaviour, which was highlighted by the dynamic gloss and ink setting studies. Prediction of ink setting behaviour was also further improved by use of separate permeability factors for different ink types in connection to filtration equations. The roles of ink components were studied in connection to ink absorption and mechanism of print rub. Total solids content and ratio of linseed oil to mineral oil were found to determine the degree of print rub on coated papers. Wax addition improved print rub resistance, but would not decrease print rub as much as lowering the total solids content in the ink. Linseed oil was shown to absorb into pigment coating pores by mechanism of adsorption to pore walls, which highlights the need for sufficient pore surface area for improved chromatographic separation of ink components. These results should help press operators, suppliers of printing presses, papermakers and suppliers to papermakers, to better understand the material and operating conditions of the press as it relates to various print quality issues. Even though paper is in competition with electronic media, high quality printed products are still in demand. The results should provide useful information for this segment of the industry.

Horizontal pressures in cylindrical metal silos and comparison with different international standards

The focus of this research was to evaluate the horizontal pressures on a cylindrical metal silo of corrugated walls and flat bottom with 1.82m diameter and 5.4m high, and to compare the values with those obtained theoretically by the ISO 11697, EP 433 and AS 3774 standards. The silo was symmetrically filled and constant speed with wheat cv. soft red for two different height/diameter ratios (H/D) and was unloaded through three orifices with a diameter of 71.6mm, one concentric and two eccentrics. Horizontal pressures were measured on the walls of the silo at three positions using hydraulic type pressure cells. The results showed that shortly after the start of the unloading, there was a mass flow above the quota of H/D = 1.2, whereas below this quota funnel flow occurred. It can be said that the EP 433 standard was more appropriate to predict horizontal pressures in silos in H/D ratio = 1.0, with eccentric unloading. For the H/D ratio = 1.5, AS 3774 standard was the one that produced values closer to the experimental.