Do drinking and riding mix? Effects of legal doses of alcohol on balance ability in experienced motorcyclists

The appropriateness of applying drink driving legislation to motorcycle riding has been questioned as there may be fundamental differences in the effects of alcohol on these two activities. For example, while the distribution of blood alcohol content (BAC) levels among fatally injured male drivers compared to riders is similar, a greater proportion of motorcycle fatalities involve levels in the lower (0 to .10% BAC) range. Several psychomotor and higher-order cognitive skills underpinning riding performance appear to be significantly influenced by low levels of alcohol. For example, at low levels (.02 to .046% BAC), riders show significant increases in reaction time to hazardous stimuli, inattention to the riding task, performance errors such as leaving the roadway and a reduced ability to complete a timed course. It has been suggested that alcohol may redirect riders’ focus from higher-order cognitive skills to more physical skills such as maintaining balance. As part of a research program to investigate the potential benefits of introducing a zero, or reduced, BAC for all riders in Queensland regardless of their licence status, the effects of low doses of alcohol on balance ability were investigated in a laboratory setting. The static balance of ten experienced riders was measured while they performed either no secondary task, a visual search task, or a cognitive (arithmetic) task following the administration of alcohol (0; 0.02, and 0.05% BAC). Subjective ratings of intoxication and balance impairment increased in a dose-dependent manner; however, objective measures of static balance were negatively affected only at the .05% BAC dose. Performance on a concurrent secondary visual search task, but not a purely cognitive (arithmetic) task, improved postural stability across all BAC levels. Finally, the .05% BAC dose was associated with impaired performance on the cognitive (arithmetic) task, but not the visual search task, when participants were balancing, but neither task was impaired by alcohol when participants were standing on the floor. Implications for road safety and future ‘drink riding’ policy considerations are discussed.

Inpatients had mostly negative experiences of seclusion during short term treatment in a mental health facility

Design Semi-structured interviews. Setting 2 open, acute care units of a large tertiary mental health facility in Queensland, Australia. Patients 12 patients (58% men) who were 18–52 years of age and were secluded in the previous 7 days (mean duration 3.4 h). Methods Semi-structured, thematically organised interviews were audiotaped and transcribed. Transcripts were checked for errors against the audiotaped versions and were analysed using the process of meaning categorisation. Themes were identified and coded to produce categories. All members of the research team agreed on the final categorisations. These broad categories were further analysed, and themes were used to reflect patients' experiences of seclusion. Main findings 5 recurrent themes emerged. (1) Patients described the use of seclusion. Some patients thought that seclusion was used inappropriately and that the seclusion period was of more benefit to …

Traffic density estimation of signalised arterials with stop line detector and probe data

This research aims to develop a reliable density estimation method for signalised arterials based on cumulative counts from upstream and downstream detectors. In order to overcome counting errors associated with urban arterials with mid-link sinks and sources, CUmulative plots and Probe Integration for Travel timE estimation (CUPRITE) is employed for density estimation. The method, by utilizing probe vehicles’ samples, reduces or cancels the counting inconsistencies when vehicles’ conservation is not satisfied within a section. The method is tested in a controlled environment, and the authors demonstrate the effectiveness of CUPRITE for density estimation in a signalised section, and discuss issues associated with the method.

Fluid-structure interaction analysis of full scale vehicle-barrier impact using coupled SPH-FEA

Portable water-filled barriers (PWFB) are roadside structures used to separate moving traffic from work-zones. Numerical PWFB modelling is preferred in the design stages prior to actual testing. This paper aims to study the fluid-structure interaction of PWFB under vehicular impact using several methods. The strategy to treat water as non-structural mass was proposed and the errors were investigated. It was found that water can be treated with the FEA-NSM model for velocities higher than 80kmh-1. However, full SPH/FEA model is still the best treatment for water and necessary for lower impact velocities. The findings in this paper can be used as guidelines for modelling and designing PWFB.

The valuation accuracy of multiples in mergers and acquisitions, and their association with firm misvaluation

This study explores the accuracy and valuation implications of the application of a comprehensive list of equity multiples in the takeover context. Motivating the study is the prevalent use of equity multiples in practice, the observed long-run underperformance of acquirers following takeovers, and the scarcity of multiplesbased research in the merger and acquisition setting. In exploring the application of equity multiples in this context three research questions are addressed: (1) how accurate are equity multiples (RQ1); which equity multiples are more accurate in valuing the firm (RQ2); and which equity multiples are associated with greater misvaluation of the firm (RQ3). Following a comprehensive review of the extant multiples-based literature it is hypothesised that the accuracy of multiples in estimating stock market prices in the takeover context will rank as follows (from best to worst): (1) forecasted earnings multiples, (2) multiples closer to bottom line earnings, (3) multiples based on Net Cash Flow from Operations (NCFO) and trading revenue. The relative inaccuracies in multiples are expected to flow through to equity misvaluation (as measured by the ratio of estimated market capitalisation to residual income value, or P/V). Accordingly, it is hypothesised that greater overvaluation will be exhibited for multiples based on Trading Revenue, NCFO, Book Value (BV) and earnings before interest, tax, depreciation and amortisation (EBITDA) versus multiples based on bottom line earnings; and that multiples based on Intrinsic Value will display the least overvaluation. The hypotheses are tested using a sample of 147 acquirers and 129 targets involved in Australian takeover transactions announced between 1990 and 2005. The results show that first, the majority of computed multiples examined exhibit valuation errors within 30 percent of stock market values. Second, and consistent with expectations, the results provide support for the superiority of multiples based on forecasted earnings in valuing targets and acquirers engaged in takeover transactions. Although a gradual improvement in estimating stock market values is not entirely evident when moving down the Income Statement, historical earnings multiples perform better than multiples based on Trading Revenue or NCFO. Third, while multiples based on forecasted earnings have the highest valuation accuracy they, along with Trading Revenue multiples for targets, produce the most overvalued valuations for acquirers and targets. Consistent with predictions, greater overvaluation is exhibited for multiples based on Trading Revenue for targets, and NCFO and EBITDA for both acquirers and targets. Finally, as expected, multiples based Intrinsic Value (along with BV) are associated with the least overvaluation. Given the widespread usage of valuation multiples in takeover contexts these findings offer a unique insight into their relative effectiveness. Importantly, the findings add to the growing body of valuation accuracy literature, especially within Australia, and should assist market participants to better understand the relative accuracy and misvaluation consequences of various equity multiples used in takeover documentation and assist them in subsequent investment decision making.

System level tests of transformer differential protection using an IEC 61850 process bus

The IEC 61850 family of standards for substation communication systems were released in the early 2000s, and include IEC 61850-8-1 and IEC 61850-9-2 that enable Ethernet to be used for process-level connections between transmission substation switchyards and control rooms. This paper presents an investigation of process bus protection performance, as the in-service behavior of multi-function process buses is largely unknown. An experimental approach was adopted that used a Real Time Digital Simulator and 'live' substation automation devices. The effect of sampling synchronization error and network traffic on transformer differential protection performance was assessed and compared to conventional hard-wired connections. Ethernet was used for all sampled value measurements, circuit breaker tripping, transformer tap-changer position reports and Precision Time Protocol synchronization of sampled value merging unit sampling. Test results showed that the protection relay under investigation operated correctly with process bus network traffic approaching 100% capacity. The protection system was not adversely affected by synchronizing errors significantly larger than the standards permit, suggesting these requirements may be overly conservative. This 'closed loop' approach, using substation automation hardware, validated the operation of protection relays under extreme conditions. Digital connections using a single shared Ethernet network outperformed conventional hard-wired solutions.

Privacy concerns and the purchasing of travel services online

The travel industry has come to rely heavily on information and communication technologies to facilitate relations with consumers. Compiling consumer data profiles has become easier and it is generally thought that this has led to an increase in consumers' privacy concerns, which may have an adverse impact on their willingness to purchase online. Three specific aspects of privacy that have received attention from researchers are unauthorized secondary use of data, invasion of privacy, and errors. A study was undertaken to examine the effects of these factors on prior purchase of travel services via the Internet and future purchase probability. No evidence was found to indicate that such privacy concerns affect online purchase behavior within the travel industry. Managerial implications are discussed.

Incorporating translation in qualitative studies : two case studies in education

Cross-language qualitative research in education continues to increase. However, there has been inadequate discussion in the literature concerning the translation process that ensures research trustworthiness applicable for bilingual researchers. Informed by the literature on evaluation criteria for qualitative data translation, this paper compares two different procedures for incorporating translation in education qualitative research to provide a clear depiction of the complexities involved in translating qualitative data and the strengths and weaknesses of each procedure. To maintain the trustworthiness of the qualitative research, it is necessary to minimise translation errors, provide detailed accounts of the translation process, involve more than one translator and remain open to scrutiny from those seeking to access the translation process. Taking into account the resource constraints often faced by novice qualitative researchers, this paper provides some strategies that can be employed in similar contexts.

Ten basic factors to identify suitable subcontractors for construction projects

With unpredictable workloads and a need for a multitude of specialized skills, many main contractors rely heavily on subcontracting to reduce their risks (Bresnen et al., 1985; Beardsworth et al., 1988). This is especially the case In Hong Kong, where the average direct labour content accounts for only around 1% of the total contract sum (Lai, 1987). Extensive usage of subcontracting is also reported in many other countries, including the UK (Gray and Flanagan, 1989) and Japan (Bennett et al., 1987). In addition, and depending upon the scale and complexity of works, it is not uncommon for subcontractors to further sublet their works to lower tier(s) subcontractors. Richter and Mitchell (1982) argued that main contractors can obtain a higher profit margin by reducing their performance costs by subcontracting work to those who have the necessary resources to perform the work more efficiently and economically. Subcontracting is also used strategically to allow firms to employ a minimum work force under fluctuating demand (Usdiken and Sözen, 1985). Through subcontracting, the risks of main contractors are also reduced, as errors in estimating or additional costs caused by delays or extra labour requirements can be absorbed by the subcontractors involved (Woon and Ofori, 2000). Despite these benefits, the quality of work can suffer when incapable or inexperienced subcontractors are employed. Additional problems also exist in the form of bid shopping, unclear accountability, and high fragmentation (Palaneeswaran et al., 2002). A recent CIB TG 23 International Conference, October 2003, Hong Kong report produced by the Hong Kong Construction Industry Review Committee (CIRC) points to development of a framework to help distinguish between capable and incapable subcontractors (Tang, 2001). This paper describes research aims at identifying and prioritising criteria for use in such a framework.

Safety at railway level crossings : driver acceptance of potential ITS interventions

There is a continuing need to improve safety at Railway Level Crossings (RLX) particularly those that do not have gates and lights regulating traffic flow. A number of Intelligent Transport System (ITS) interventions have been proposed to improve drivers’ awareness and reduce errors in detecting and responding appropriately at level crossings. However, as with other technologies, successful implementation and ultimately effectiveness rests with the acceptance of the technology by the end user. In the current research, four focus groups were held (n=38) with drivers in metropolitan and regional locations in Queensland to examine their perceptions of potential in-vehicle and road-based ITS interventions to improve safety at RLX. The findings imply that further development of the ITS interventions, in particular the design and related promotion of the final product, must consider ease of use, usefulness and relative cost.

Lexis Nexis Questions and Answers : Equity and Trusts [4th Ed.]

"LexisNexis Questions and Answers: Equity and Trusts provides students with a clear and systematic approach to successfully analysing and answering assessment questions on equity and trusts. Each chapter commences with a discussion of key principles and issues including a summary of relevant leading cases and legislation for effective revision. Examples of written questions with fact scenarios follow, each with a suggested answer plan, sample answer and comments on how the answer might be viewed by an examiner. Readers are provided with advice on common errors to avoid when answering questions and practical hints and tips on how to achieve higher marks. Features • Summary of key issues helps students revise key areas before attempting problem questions • Sample questions with model answers assist students with effective exam study preparation"--publisher website

The impact of blur, illumination and distracters on tests related to driving performance

This thesis investigated a range of factors underlying the impact of uncorrected refractive errors on laboratory-based tests related to driving. Results showed that refractive blur had a pronounced effect on recognition of briefly presented targets, particularly under low light conditions. Blur, in combination with audio distracters, also slowed a participant's reactions to road hazards in video presentations. This suggests that recognition of suddenly appearing road hazards might be slowed in the presence of refractive blur, particularly under conditions of distraction. These findings highlight the importance of correcting even small refractive errors for driving, particularly at night.

A security system based on human iris identification using wavelet transform

A security system based on the recognition of the iris of human eyes using the wavelet transform is presented. The zero-crossings of the wavelet transform are used to extract the unique features obtained from the grey-level profiles of the iris. The recognition process is performed in two stages. The first stage consists of building a one-dimensional representation of the grey-level profiles of the iris, followed by obtaining the wavelet transform zerocrossings of the resulting representation. The second stage is the matching procedure for iris recognition. The proposed approach uses only a few selected intermediate resolution levels for matching, thus making it computationally efficient as well as less sensitive to noise and quantisation errors. A normalisation process is implemented to compensate for size variations due to the possible changes in the camera-to-face distance. The technique has been tested on real images in both noise-free and noisy conditions. The technique is being investigated for real-time implementation, as a stand-alone system, for access control to high-security areas.

Spatial prediction of N2O emissions in pasture : a Bayesian model averaging analysis

Nitrous oxide (N2O) is one of the greenhouse gases that can contribute to global warming. Spatial variability of N2O can lead to large uncertainties in prediction. However, previous studies have often ignored the spatial dependency to quantify the N2O - environmental factors relationships. Few researches have examined the impacts of various spatial correlation structures (e.g. independence, distance-based and neighbourhood based) on spatial prediction of N2O emissions. This study aimed to assess the impact of three spatial correlation structures on spatial predictions and calibrate the spatial prediction using Bayesian model averaging (BMA) based on replicated, irregular point-referenced data. The data were measured in 17 chambers randomly placed across a 271 m(2) field between October 2007 and September 2008 in the southeast of Australia. We used a Bayesian geostatistical model and a Bayesian spatial conditional autoregressive (CAR) model to investigate and accommodate spatial dependency, and to estimate the effects of environmental variables on N2O emissions across the study site. We compared these with a Bayesian regression model with independent errors. The three approaches resulted in different derived maps of spatial prediction of N2O emissions. We found that incorporating spatial dependency in the model not only substantially improved predictions of N2O emission from soil, but also better quantified uncertainties of soil parameters in the study. The hybrid model structure obtained by BMA improved the accuracy of spatial prediction of N2O emissions across this study region.

Perioperative medication management: expanding the role of the preadmission clinic pharmacist in a single centre, randomised controlled trial of collaborative prescribing

Objectives Current evidence to support non-medical prescribing is predominantly qualitative, with little evaluation of accuracy, safety and appropriateness. Our aim was to evaluate a new model of service for the Australia healthcare system, of inpatient medication prescribing by a pharmacist in an elective surgery preadmission clinic (PAC) against usual care, using an endorsed performance framework. Design Single centre, randomised controlled, two-arm trial. Setting Elective surgery PAC in a Brisbane-based tertiary hospital. Participants 400 adults scheduled for elective surgery were randomised to intervention or control. Intervention A pharmacist generated the inpatient medication chart to reflect the patient's regular medication, made a plan for medication perioperatively and prescribed venous thromboembolism (VTE) prophylaxis. In the control arm, the medication chart was generated by the Resident Medical Officers. Outcome measures Primary outcome was frequency of omissions and prescribing errors when compared against the medication history. The clinical significance of omissions was also analysed. Secondary outcome was appropriateness of VTE prophylaxis prescribing. Results There were significantly less unintended omissions of medications: 11 of 887 (1.2%) intervention orders compared with 383 of 1217 (31.5%) control (p<0.001). There were significantly less prescribing errors involving selection of drug, dose or frequency: 2 in 857 (0.2%) intervention orders compared with 51 in 807 (6.3%) control (p<0.001). Orders with at least one component of the prescription missing, incorrect or unclear occurred in 208 of 904 (23%) intervention orders and 445 of 1034 (43%) controls (p<0.001). VTE prophylaxis on admission to the ward was appropriate in 93% of intervention patients and 90% controls (p=0.29). Conclusions Medication charts in the intervention arm contained fewer clinically significant omissions, and prescribing errors, when compared with controls. There was no difference in appropriateness of VTE prophylaxis on admission between the two groups.