An improved iterative finite element solution for pin joints

Accurate, reliable and economical methods of determining stress distributions are important for fastener joints. In the past the contact stress problems in these mechanically fastened joints using interference or push or clearance fit pins were solved using both inverse and iterative techniques. Inverse techniques were found to be most efficient, but at times inadequate in the presence of asymmetries. Iterative techniques based on the finite element method of analysis have wider applications, but they have the major drawbacks of being expensive and time-consuming. In this paper an improved finite element technique for iteration is presented to overcome these drawbacks. The improved iterative technique employs a frontal solver for elimination of variables not requiring iteration, by creation of a dummy element. This automatically results in a large reduction in computer time and in the size of the problem to be handled during iteration. Numerical results are compared with those available in the literature. The method is used to study an eccentrically located pin in a quasi-isotropic laminated plate under uniform tension.

Tietokone ikäihmisen arjessa

The aged people in the target group of my study belong to generation, which has experienced the shift from agricultural society via industrial society up to the society which has been described as information society. They have grown up concurrently with the technological development, but during the recent years the technological development has accelerated. One can say that the older the target study group has come the more information technological skills they need to possess to be equal actors in our society. However, especially in case of aged people the learning and maintaining of skills in information technology has mainly been left dependent on their personal motivation. The purpose of this report is to study the use of computers in the life of the aged people. The report studies the will and ability of the aged people to learn the skill of using computers, and the new possibilities which this brings into their lives. The study questions are the following: 1) Why the aged people start to use computers? 2) How the aged people benefit information technology in their own life? 3) How computers have extended the environment of the aged people? 4) What kind of problems the aged people have experienced in use of computers? The research material consists of group interviews and individual interviews (total of 23 people). The interview material has been collected among the participants on information technology courses of the Senior University of Helsinki University during years 2004-2005. The research method used is theme interviewing. In addition, the material of opinions about information technology of people born in decades of 1920 and 1930, gathered as part of the Ikihyvä Päijät-Häme 2002 -research has been used. On basis of this research one can say that the aged people do have motivation to study the use of computers, although many interviewees commented that they also have met problems in use of computers. The motivation has grown also because the fear that without the skills to use computers they could drift into outsiders of the society, whereas instead as skilled computer users they felt to be equal citizens compared with the younger age groups, and that they can maintain their independence and autonomy. Especially, the independent use of banking routines over the Internet and use of emails seem to give them a position as modern actors. Many interview statements also underline that computers will bring both joy and benefit to the users. Studying the use of computers is a new and interesting hobby, which can fill the hole left in the life after leaving the working life. Using skills of text processing and processing of pictures one can, for example, record the traditional knowledge of the family and ancestry to the younger generations, and write articles or even books on the professional area of ones own. Single people emphasize that computers can even act as companionship substitutes. One can use Internet for virtual traveling, which provides a new dimension in use of computers. Internet can also be used to maintain family relationships, especially between grandparents and remote grandchildren. Typical problems in use of computers appeared to be that reaching the right professional helpdesk advisers of the service providers is difficult and requires lots of time and patience. However, the interviewees were not willing to give up their computers, because they had already used to these. Keywords: digital divide, aging, Internet, usability, motivation, information technology, information society.

Turbulent flow computations on a hybrid cartesian point distribution using meshless solver LSFD-U

This paper may be considered as a sequel to one of our earlier works pertaining to the development of an upwind algorithm for meshless solvers. While the earlier work dealt with the development of an inviscid solution procedure, the present work focuses on its extension to viscous flows. A robust viscous discretization strategy is chosen based on positivity of a discrete Laplacian. This work projects meshless solver as a viable cartesian grid methodology. The point distribution required for the meshless solver is obtained from a hybrid cartesian gridding strategy. Particularly considering the importance of an hybrid cartesian mesh for RANS computations, the difficulties encountered in a conventional least squares based discretization strategy are highlighted. In this context, importance of discretization strategies which exploit the local structure in the grid is presented, along with a suitable point sorting strategy. Of particular interest is the proposed discretization strategies (both inviscid and viscous) within the structured grid block; a rotated update for the inviscid part and a Green-Gauss procedure based positive update for the viscous part. Both these procedures conveniently avoid the ill-conditioning associated with a conventional least squares procedure in the critical region of structured grid block. The robustness and accuracy of such a strategy is demonstrated on a number of standard test cases including a case of a multi-element airfoil. The computational efficiency of the proposed meshless solver is also demonstrated. (C) 2010 Elsevier Ltd. All rights reserved.

Influence of an additional discrete elastic support on the stability of a Leipholz column

The stability characteristics of a conservatively loaded structure are expected to improve if additional supports are provided to the structure. The same, however, may not be said of a non-conservatively loaded structure; several factors, such as the location and stiffness of supports, type of structure and loading, have a significant influence on the stability characteristics. The influence of an arbitrarily located elastic support on the stability characteristics of a Leipholz column is examined.

A mimetic-based frequency domain technique for automatic generation of EEG reports

This paper describes a novel mimetic technique of using frequency domain approach and digital filters for automatic generation of EEG reports. Digitized EEG data files, transported on a cartridge, have been used for the analysis. The signals are filtered for alpha, beta, theta and delta bands with digital bandpass filters of fourth-order, cascaded, Butterworth, infinite impulse response (IIR) type. The maximum amplitude, mean frequency, continuity index and degree of asymmetry have been computed for a given EEG frequency band. Finally, searches for the presence of artifacts (eye movement or muscle artifacts) in the EEG records have been made.

Determination of rational strategies for players in two-target games

This paper addresses some of the basic issues involved in the determination of rational strategies for players in two-target games. We show that unlike single-target games where the task of role assignment and selection of strategies is conceptually straightforward, in two-target games, many factors like the preference ordering of outcomes by players, the relative configuration of the target sets and secured outcome regions, the uncertainty about the parameters of the game, etc., also influence the rational selection of strategies by players. The importance of these issues is illustrated through appropriate examples.

Modelling and analysis of the variance in parallelism in parallel computations

In this paper, we introduce an analytical technique based on queueing networks and Petri nets for making a performance analysis of dataflow computations when executed on the Manchester machine. This technique is also applicable for the analysis of parallel computations on multiprocessors. We characterize the parallelism in dataflow computations through a four-parameter characterization, namely, the minimum parallelism, the maximum parallelism, the average parallelism and the variance in parallelism. We observe through detailed investigation of our analytical models that the average parallelism is a good characterization of the dataflow computations only as long as the variance in parallelism is small. However, significant difference in performance measures will result when the variance in parallelism is comparable to or higher than the average parallelism.

Nonlinear finite element analysis of reinforced concrete corbel

Reinforced concrete corbels have been analysed using the nonlinear finite element method. An elasto-plastic-cracking constitutive formulation using Huber-Hencky-Mises yield surface augmented with a tension cut-off is employed. Smeared-fixed cracking with mesh-dependent strain softening is employed to obtain objective results. Multiple non-orthogonal cracking and opening and closing of cracks are permitted. The model and the formulation are verified with respect to available numerical solution for an RC corbel. Results of analyses of nine reinforced concrete corbels are presented and compared with experimental results. Nonlinear finite element analysis of reinforced concrete structures is shown to be a complement and also a feasible alternative to laboratory testing.

Löydöstä muinaispuvuksi : arkeologisten tekstiilien ennallistaminen

From a find to an ancient costume - reconstruction of archaeological textiles Costume tells who we are. It warms and protects us, but also tells about our identity: gender, age, family, social group, work, religion and ethnicity. Textile fabrication, use and trade have been an important part of human civilization for more than 10 000 years. There are plenty of archaeological textile findings, but they are small, fragmentary and their interpretation requires special skills. Finnish textile findings from the younger Iron Age have already been studied for more than hundred years. They have also been used as a base for several reconstructions called muinaispuku , ancient costume. Thesis surveys the ancient costume reconstruction done in Finland and discusses the objectives of the reconstruction projects. The earlier reconstruction projects are seen as a part of the national project of constructing a glorious past for Finnish nationality, and the part women took in this project. Many earlier reconstructions are designed to be festive costumes for wealthy ladies. In the 1980s and 1990s many new ancient costume reconstructions were made, differing from their predecessors at the pattern of the skirt. They were also done following the principles of making a scientific reconstruction more closely. At the same time historical re-enactment and living history as a hobby have raised in popularity, and the use of ancient costumes is widening from festive occasions to re-enactment purposes. A hypothesis of the textile craft methods used in younger Iron Age Finland is introduced. Archaeological findings from Finland and neighboring countries, ethnological knowledge of textile crafts and experimental archaeology have been used as a basis for this proposition. The yarn was spinned with a spindle, the fabrics woven on a warp-weighted loom and dyed with natural colors. Bronze spiral applications and complicated tablet-woven bands have possibly been done by specialist craftswomen or -men. The knowledge of the techniques and results of experimenting and experimental archaeology gives a possibility to review the success of existing ancient costume reconstructions as scientific reconstructions. Only one costume reconstruction project, the Kaarina costume fabricated in Kurala Kylämäki museum, has been done using as authentic methods as possible. The use of ancient craft methods is time-consuming and expensive. This fact can be seen as one research result itself for it demonstrates how valuable the ancient textiles have been also in their time of use. In the costume reconstruction work, the skill of a craftswoman and her knowledge of ancient working methods is strongly underlined. Textile research is seen as a process, where examination of original textiles and reconstruction experiments discuss with each other. Reconstruction projects can give a lot both to the research of Finnish younger Iron Age and the popularization of archaeological knowledge. The reconstruction is never finished, and also the earlier reconstructions should be reviewed in the light of new findings.

Do wordnets also improve human performance on NLP tasks?

FinnWordNet is a wordnet for Finnish that complies with the format of the Princeton WordNet (PWN) (Fellbaum, 1998). It was built by translating the PrincetonWordNet 3.0 synsets into Finnish by human translators. It is open source and contains 117000 synsets. The Finnish translations were inserted into the PWN structure resulting in a bilingual lexical database. In natural language processing (NLP), wordnets have been used for infusing computers with semantic knowledge assuming that humans already have a sufficient amount of this knowledge. In this paper we present a case study of using wordnets as an electronic dictionary. We tested whether native Finnish speakers benefit from using a wordnet while completing English sentence completion tasks. We found that using either an English wordnet or a bilingual English Finnish wordnet significantly improves performance in the task. This should be taken into account when setting standards and comparing human and computer performance on these tasks.

Theoretical and experimental investigation of framed structure-layered soil interaction problems

The plane stress solution for the interaction analysis of a framed structure, with a foundation beam, resting on a layered soil has been studied using both theoretical and photoelastic methods. The theoretical analysis has been done by using a combined analytical and finite element method. In this, the analytical solution has been used for the semi-infinite layered medium and finite element method for the framed structure. The experimental investigation has been carried out using two-dimensional photoelasticity in which modelling of the layered semi-infinite plane and a method to obtain contact pressure distribution have been discussed. The theoretical and experimental results in respect of contact pressure distribution between the foundation beam and layered soil medium, the fibre stresses in the foundation beam and framed structure have been compared. These results have also been compared with theoretical results obtained by idealizing the layered semi-infinite plane as (a) a Winkler model and (b) an equivalent homogeneous semi-infinite medium

Thermomechanical generalization of pin joints in finite plates

The understanding of thermoelastic behaviour of joints is significant in order to ensure the integrity of large and complex structures exposed to a thermal environment, particularly in fields such as aerospace and nuclear engineering. Thermomechanical generalization of partial contact behaviour of a pin joint under combined in-plane mechanical loading and on-axis unidirectional heat flow has already been established by the authors for the analytically simpler domains of large plates. This paper successfully extends the on-going investigation to a single pin in a finite rectangular isotropic plate as a two-dimensional abstraction from a practical situation of a multipin fastener joint. The finite element method is used to analyse the joint problem under on-axis thermomechanical loading and unified load-contact relationships are established for a class of loading conditions.

Load balancing algorithms for an extended hypercube

Reduction of the execution time of a job through equitable distribution of work load among the processors in a distributed system is the goal of load balancing. Performance of static and dynamic load balancing algorithms for the extended hypercube, is discussed. Threshold algorithms are very well-known algorithms for dynamic load balancing in distributed systems. An extension of the threshold algorithm, called the multilevel threshold algorithm, has been proposed. The hierarchical interconnection network of the extended hypercube is suitable for implementing the proposed algorithm. The new algorithm has been implemented on a transputer-based system and the performance of the algorithm for an extended hypercube is compared with those for mesh and binary hypercube networks

Use of running fractal dimension for the analysis of changing patterns in electroencephalograms

Running fractal dimensions were measured on four channels of an electroencephalogram (EEG) recorded from a normal volunteer. The changes in the background activity due to eye closure were clearly differentiated by the fractal method. The compressed spectral array (CSA) and the running fractal dimensions of the EEG showed corresponding changes with respect to change in the background activity. The fractal method was also successful in detecting low amplitude spikes and the changes in the patterns in the EEG. The effects of different window lengths and shifts on the running fractal dimension have also been studied. The utility of fractal method for EEG data compression is highlighted.