Evaluation of Speaker Normalization Methods for Vowel Recognition Using Fuzzy ARTMAP and K-NN

A procedure that uses fuzzy ARTMAP and K-Nearest Neighbor (K-NN) categorizers to evaluate intrinsic and extrinsic speaker normalization methods is described. Each classifier is trained on preprocessed, or normalized, vowel tokens from about 30% of the speakers of the Peterson-Barney database, then tested on data from the remaining speakers. Intrinsic normalization methods included one nonscaled, four psychophysical scales (bark, bark with end-correction, mel, ERB), and three log scales, each tested on four different combinations of the fundamental (Fo) and the formants (F1 , F2, F3). For each scale and frequency combination, four extrinsic speaker adaptation schemes were tested: centroid subtraction across all frequencies (CS), centroid subtraction for each frequency (CSi), linear scale (LS), and linear transformation (LT). A total of 32 intrinsic and 128 extrinsic methods were thus compared. Fuzzy ARTMAP and K-NN showed similar trends, with K-NN performing somewhat better and fuzzy ARTMAP requiring about 1/10 as much memory. The optimal intrinsic normalization method was bark scale, or bark with end-correction, using the differences between all frequencies (Diff All). The order of performance for the extrinsic methods was LT, CSi, LS, and CS, with fuzzy AHTMAP performing best using bark scale with Diff All; and K-NN choosing psychophysical measures for all except CSi.

Processing of Synthetic Aperture Radar Images by a Multiscale Boundary Contour System and Feature Contour System

An improved Boundary Contour System (BCS) and Feature Contour System (FCS) neural network model of preattentive vision is applied to large images containing range data gathered by a synthetic aperture radar (SAR) sensor. The goal of processing is to make structures such as motor vehicles, roads, or buildings more salient and more interpretable to human observers than they are in the original imagery. Early processing by shunting center-surround networks compresses signal dynamic range and performs local contrast enhancement. Subsequent processing by filters sensitive to oriented contrast, including short-range competition and long-range cooperation, segments the image into regions. The segmentation is performed by three "copies" of the BCS and FCS, of small, medium, and large scales, wherein the "short-range" and "long-range" interactions within each scale occur over smaller or larger distances, corresponding to the size of the early filters of each scale. A diffusive filling-in operation within the segmented regions at each scale produces coherent surface representations. The combination of BCS and FCS helps to locate and enhance structure over regions of many pixels, without the resulting blur characteristic of approaches based on low spatial frequency filtering alone.

Speaker Normalization Methods for Vowel Cognition: Comparative Analysis Using Neural Network and Nearest Neighbor Classifiers

Intrinsic and extrinsic speaker normalization methods are systematically compared using a neural network (fuzzy ARTMAP) and L1 and L2 K-Nearest Neighbor (K-NN) categorizers trained and tested on disjoint sets of speakers of the Peterson-Barney vowel database. Intrinsic methods include one nonscaled, four psychophysical scales (bark, bark with endcorrection, mel, ERB), and three log scales, each tested on four combinations of F0 , F1, F2, F3. Extrinsic methods include four speaker adaptation schemes, each combined with the 32 intrinsic methods: centroid subtraction across all frequencies (CS), centroid subtraction for each frequency (CSi), linear scale (LS), and linear transformation (LT). ARTMAP and KNN show similar trends, with K-NN performing better, but requiring about ten times as much memory. The optimal intrinsic normalization method is bark scale, or bark with endcorrection, using the differences between all frequencies (Diff All). The order of performance for the extrinsic methods is LT, CSi, LS, and CS, with fuzzy ARTMAP performing best using bark scale with Diff All; and K-NN choosing psychophysical measures for all except CSi.

The What-And-Where Filter: A Spatial Mapping Neural Network for Object Recognition and Image Understanding

The What-and-Where filter forms part of a neural network architecture for spatial mapping, object recognition, and image understanding. The Where fllter responds to an image figure that has been separated from its background. It generates a spatial map whose cell activations simultaneously represent the position, orientation, ancl size of all tbe figures in a scene (where they are). This spatial map may he used to direct spatially localized attention to these image features. A multiscale array of oriented detectors, followed by competitve and interpolative interactions between position, orientation, and size scales, is used to define the Where filter. This analysis discloses several issues that need to be dealt with by a spatial mapping system that is based upon oriented filters, such as the role of cliff filters with and without normalization, the double peak problem of maximum orientation across size scale, and the different self-similar interpolation properties across orientation than across size scale. Several computationally efficient Where filters are proposed. The Where filter rnay be used for parallel transformation of multiple image figures into invariant representations that are insensitive to the figures' original position, orientation, and size. These invariant figural representations form part of a system devoted to attentive object learning and recognition (what it is). Unlike some alternative models where serial search for a target occurs, a What and Where representation can he used to rapidly search in parallel for a desired target in a scene. Such a representation can also be used to learn multidimensional representations of objects and their spatial relationships for purposes of image understanding. The What-and-Where filter is inspired by neurobiological data showing that a Where processing stream in the cerebral cortex is used for attentive spatial localization and orientation, whereas a What processing stream is used for attentive object learning and recognition.

The Role of Edges and Line-Ends in Illusory Contour Formation

Illusory contours can be induced along directions approximately collinear to edges or approximately perpendicular to the ends of lines. Using a rating scale procedure we explored the relation between the two types of inducers by systematically varying the thickness of inducing elements to result; in varying amounts of "edge-like" or "line-like" induction. Inducers for om illusory figures consisted of concentric rings with arcs missing. Observers judged the clarity and brightness of illusory figures as the number of arcs, their thicknesses, and spacings were parametrically varied. Degree of clarity and amount of induced brightness were both found to be inverted-U functions of the number of arcs. These results mandate that any valid model of illusory contour formation must account for interference effects between parallel lines or between those neural units responsible for completion of boundary signals in directions perpendicular to the ends of thin lines. Line width was found to have an effect on both clarity and brightness, a finding inconsistent with those models which employ only completion perpendicular to inducer orientation.

Texture Segregation By Visual Cortex: Perceptual Grouping, Attention, and Learning

A neural model is proposed of how laminar interactions in the visual cortex may learn and recognize object texture and form boundaries. The model brings together five interacting processes: region-based texture classification, contour-based boundary grouping, surface filling-in, spatial attention, and object attention. The model shows how form boundaries can determine regions in which surface filling-in occurs; how surface filling-in interacts with spatial attention to generate a form-fitting distribution of spatial attention, or attentional shroud; how the strongest shroud can inhibit weaker shrouds; and how the winning shroud regulates learning of texture categories, and thus the allocation of object attention. The model can discriminate abutted textures with blurred boundaries and is sensitive to texture boundary attributes like discontinuities in orientation and texture flow curvature as well as to relative orientations of texture elements. The model quantitatively fits a large set of human psychophysical data on orientation-based textures. Object boundar output of the model is compared to computer vision algorithms using a set of human segmented photographic images. The model classifies textures and suppresses noise using a multiple scale oriented filterbank and a distributed Adaptive Resonance Theory (dART) classifier. The matched signal between the bottom-up texture inputs and top-down learned texture categories is utilized by oriented competitive and cooperative grouping processes to generate texture boundaries that control surface filling-in and spatial attention. Topdown modulatory attentional feedback from boundary and surface representations to early filtering stages results in enhanced texture boundaries and more efficient learning of texture within attended surface regions. Surface-based attention also provides a self-supervising training signal for learning new textures. Importance of the surface-based attentional feedback in texture learning and classification is tested using a set of textured images from the Brodatz micro-texture album. Benchmark studies vary from 95.1% to 98.6% with attention, and from 90.6% to 93.2% without attention.

From Stereograms to Surface: How the Brain Sees the World in Depth

When we look at a scene, how do we consciously see surfaces infused with lightness and color at the correct depths? Random Dot Stereograms (RDS) probe how binocular disparity between the two eyes can generate such conscious surface percepts. Dense RDS do so despite the fact that they include multiple false binocular matches. Sparse stereograms do so even across large contrast-free regions with no binocular matches. Stereograms that define occluding and occluded surfaces lead to surface percepts wherein partially occluded textured surfaces are completed behind occluding textured surfaces at a spatial scale much larger than that of the texture elements themselves. Earlier models suggest how the brain detects binocular disparity, but not how RDS generate conscious percepts of 3D surfaces. A neural model predicts how the layered circuits of visual cortex generate these 3D surface percepts using interactions between visual boundary and surface representations that obey complementary computational rules.

ART 2-A: An Adaptive Resonance Algorithm for Rapid Category Learning and Recognition

This article introduces ART 2-A, an efficient algorithm that emulates the self-organizing pattern recognition and hypothesis testing properties of the ART 2 neural network architecture, but at a speed two to three orders of magnitude faster. Analysis and simulations show how the ART 2-A systems correspond to ART 2 dynamics at both the fast-learn limit and at intermediate learning rates. Intermediate learning rates permit fast commitment of category nodes but slow recoding, analogous to properties of word frequency effects, encoding specificity effects, and episodic memory. Better noise tolerance is hereby achieved without a loss of learning stability. The ART 2 and ART 2-A systems are contrasted with the leader algorithm. The speed of ART 2-A makes practical the use of ART 2 modules in large-scale neural computation.

Construction of Neural Network Classification Expert Systems Using Switching Theory Algorithms

A new family of neural network architectures is presented. This family of architectures solves the problem of constructing and training minimal neural network classification expert systems by using switching theory. The primary insight that leads to the use of switching theory is that the problem of minimizing the number of rules and the number of IF statements (antecedents) per rule in a neural network expert system can be recast into the problem of minimizing the number of digital gates and the number of connections between digital gates in a Very Large Scale Integrated (VLSI) circuit. The rules that the neural network generates to perform a task are readily extractable from the network's weights and topology. Analysis and simulations on the Mushroom database illustrate the system's performance.

The Role of Edges and Line-Ends in Illusory Contour Formation

Illusory contours can be induced along direction approximately collinear to edges or approximately perpendicular to the ends of lines. Using a rating scale procedure we explored the relation between the two types of inducers by systematically varying the thickness of inducing elements to result in varying amounts of "edge-like" or "line-like" induction. Inducers for our illusory figures consisted of concentric rings with arcs missing. Observers judged the clarity and brightness of illusory figures as the number of arcs, their thicknesses, and spacings were parametrically varied. Degree of clarity and amount of induced brightness were both found to be inverted-U functions of the number of arcs. These results mandate that any valid model of illusory contour formation must account for interference effects between parallel lines or between those neural units responsible for completion of boundary signals in directions perpendicular to the ends of thin lines. Line width was found to have an efFect on both clarity and brightness, a finding inconsistent with those models which employ only completion perpendicular to inducer orientation.

The broad-scale distribution and abundance of Scyphomedusae in Irish waters

Scyphomedusae are receiving increasing recognition as key components of marine ecosystems. However, information on their distribution and abundance beyond coastal waters is generally lacking. Organising access to such data is critical to effectively transpose findings from laboratory, mesocosm and small scale studies to the scale of ecological processes. These data are also required to identify the risks of detrimental impacts of jellyfish blooms on human activities. In Ireland, such risks raise concerns among the public, but foremost amongst the professionals of the aquaculture and fishing sectors. The present work looked at the opportunity to get access to new information on the distribution of jellyfish around Ireland mostly by using existing infrastructures and programmes. The analysis of bycatch data collected during the Irish groundfish surveys provided new insights into the distribution of Pelagia noctiluca over an area >160 000 km2, a scale never reached before in a region of the Northeast Atlantic (140 sampling stations). Similarly, 4 years of data collected during the Irish Sea juvenile gadoid fish survey provided the first spatially, explicit, information on the abundance of Aurelia aurita and Cyanea spp. (Cyanea capillata and Cyanea lamarckii) throughout the Irish Sea (> 200 sampling events). In addition, the use of ships of opportunity allowed repeated samplings (N = 37) of an >100 km long transect between Dublin (Ireland) and Holyhead (Wales, UK), therefore providing two years of seasonal monitoring of the occurrence of scyphomedusae in that region. Finally, in order to inform the movements of C. capillata in an area where many negative interactions with bathers occur, the horizontal and vertical movements of 5 individual C. capillata were investigated through acoustic tracking.

A simulation-based design method to transfer surface mount RF system to flip-chip die implementation

The flip-chip technology is a high chip density solution to meet the demand for very large scale integration design. For wireless sensor node or some similar RF applications, due to the growing requirements for the wearable and implantable implementations, flip-chip appears to be a leading technology to realize the integration and miniaturization. In this paper, flip-chip is considered as part of the whole system to affect the RF performance. A simulation based design is presented to transfer the surface mount PCB board to the flip-chip die package for the RF applications. Models are built by Q3D Extractor to extract the equivalent circuit based on the parasitic parameters of the interconnections, for both bare die and wire-bonding technologies. All the parameters and the PCB layout and stack-up are then modeled in the essential parts' design of the flip-chip RF circuit. By implementing simulation and optimization, a flip-chip package is re-designed by the parameters given by simulation sweep. Experimental results fit the simulation well for the comparison between pre-optimization and post-optimization of the bare die package's return loss performance. This design method could generally be used to transfer any surface mount PCB to flip-chip package for the RF systems or to predict the RF specifications of a RF system using the flip-chip technology.

The life history and ecology of black scabbardfish (Aphanopus carbo Lowe 1839) in the north-east Atlantic

The black scabbardfish is a deep water species that supports commercial fisheries across a large area of the NE Atlantic shelf. The life history of black scabbardfish is poorly understood and a major unresolved issue is population structure. In this study it was used a combination of methodologies to get further knowledge in the life history and population structure of A. carbo over its wide distribution range in the Northeast Atlantic. The new knowledge acquired during this study, will increase our ability to better manage this species in the NE Atlantic. It has been postulated that fish caught to the west of the British Isles are pre-adults that migrate further south (to Madeira) for spawning, implying a single panmictic population. In this study, specimens of Aphanopus carbo were sampled between September 2008 and May 2010 from two different areas: NW Scotland (French trawlers and deep water surveys) and Madeira Islands (longliners commercial landings). Geographical differences in reproductive state of scabbardfish were evident, supportive of a north-south migration theory. In the northern area, all specimens found were immature, while in Madeira all maturity stages were observed. In Madeira, spawning occurred during the fourth quarter, with peak maturity in October (males) and in November (females). The age of this species has proven difficult and has led to different and contradictory age and growth estimates. For this study, we used two reading interpretations to determine age and estimate the growth parameters. To the west of the British Isles, specimens reached a lower maximum age and had a higher growth rate than those caught off Madeira. These differences are consistent with the theory of a single population of black scabbardfish in the NE Atlantic, highly segregate, with smaller, immature and younger fish caught to the west of the British Isles and bigger and mature caught in Madeira Islands. The feeding ecology showed strong evidence that the diet of black scabbardfish is associated with the spawning migration of blue whiting, which may support a northerly feeding migration theory for black scabbardfish. The stable isotope analyses in the muscle of black scabbardfish identified that black scabbardfish feeds on species with epipelagic and benthopelagic affinities. Comparison with stable isotope analysis in Madeira samples indicated that black scabbardfish feed at a similar trophic level and has the same trophic niche width in both areas, assuming similar baseline isotope compositions. Otolith stable isotopes (oxygen - δ18O and nitrogen - δ15N) analyses were used as a tool to clarify migratory behaviour. Otolith isotope ratios can provide insight into whether adults caught around Madeira fed in an isotopically depleted northerly ecosystem (NW Scotland) during their pre-adult period and then migrate towards south to spawn. Overall, the results support a south-north migration of pre adult fish from spawning areas around Madeira and a north-south migration from the west of Scotland to the spawning areas. Given its life cycle there is an urgent need that the management process recognizes the existence of a continuous widely distributed stock of black scabbardfish between the west of the British Isles and Madeira. The results highlight large scale dispersal in this species which needs to be treated as a highly migratory species and be managed as a single population.

Hybrid integration and packaging of grating-coupled silicon photonics

This thesis covers both the packaging of silicon photonic devices with fiber inputs and outputs as well as the integration of laser light sources with these same devices. The principal challenge in both of these pursuits is coupling light into the submicrometer waveguides that are the hallmark of silicon-on-insulator (SOI) systems. Previous work on grating couplers is leveraged to design new approaches to bridge the gap between the highly-integrated domain of silicon, the Interconnected world of fiber and the active region of III-V materials. First, a novel process for the planar packaging of grating couplers with fibers is explored in detail. This technology allows the creation of easy-to-use test platforms for laser integration and also stands on its own merits as an enabling technology for next-generation silicon photonics systems. The alignment tolerances of this process are shown to be well-suited to a passive alignment process and for wafer-scale assembly. Furthermore, this technology has already been used to package demonstrators for research partners and is included in the offerings of the ePIXfab silicon photonics foundry and as a design kit for PhoeniX Software’s MaskEngineer product. After this, a process for hybridly integrating a discrete edge-emitting laser with a silicon photonic circuit using near-vertical coupling is developed and characterized. The details of the various steps of the design process are given, including mechanical, thermal, optical and electrical steps. The interrelation of these design domains is also discussed. The construction process for a demonstrator is outlined, and measurements are presented of a series of single-wavelength Fabry-Pérot lasers along with a two-section laser tunable in the telecommunications C-band. The suitability and potential of this technology for mass manufacture is demonstrated, with further opportunities for improvement detailed and discussed in the conclusion.

Development of a general internet attitude scale and internet self-efficacy scale

The measurement of users’ attitudes towards and confidence with using the Internet is an important yet poorly researched topic. Previous research has encountered issues that serve to obfuscate rather than clarify. Such issues include a lack of distinction between the terms ‘attitude’ and ‘self-efficacy’, the absence of a theoretical framework to measure each concept, and failure to follow well-established techniques for the measurement of both attitude and self-efficacy. Thus, the primary aim of this research was to develop two statistically reliable scales which independently measure attitudes towards the Internet and Internet self-efficacy. This research addressed the outlined issues by applying appropriate theoretical frameworks to each of the constructs under investigation. First, the well-known three component (affect, behaviour, cognition) model of attitudes was applied to previous Internet attitude statements. The scale was distributed to four large samples of participants. Exploratory factor analyses revealed four underlying factors in the scale: Internet Affect, Internet Exhilaration, Social Benefit of the Internet and Internet Detriment. The final scale contains 21 items, demonstrates excellent reliability and achieved excellent model fit in the confirmatory factor analysis. Second, Bandura’s (1997) model of self-efficacy was followed to develop a reliable measure of Internet self-efficacy. Data collected as part of this research suggests that there are ten main activities which individuals can carry out on the Internet. Preliminary analyses suggested that self-efficacy is confounded with previous experience; thus, individuals were invited to indicate how frequently they performed the listed Internet tasks in addition to rating their feelings of self-efficacy for each task. The scale was distributed to a sample of 841 participants. Results from the analyses suggest that the more frequently an individual performs an activity on the Internet, the higher their self-efficacy score for that activity. This suggests that frequency of use ought to be taken into account in individual’s self-efficacy scores to obtain a ‘true’ self-efficacy score for the individual. Thus, a formula was devised to incorporate participants’ previous experience of Internet tasks in their Internet self-efficacy scores. This formula was then used to obtain an overall Internet self-efficacy score for participants. Following the development of both scales, gender and age differences were explored in Internet attitudes and Internet self-efficacy scores. The analyses indicated that there were no gender differences between groups for Internet attitude or Internet self-efficacy scores. However, age group differences were identified for both attitudes and self-efficacy. Individuals aged 25-34 years achieved the highest scores on both the Internet attitude and Internet self-efficacy measures. Internet attitude and self-efficacy scores tended to decrease with age with older participants achieving lower scores on both measures than younger participants. It was also found that the more exposure individuals had to the Internet, the higher their Internet attitude and Internet self-efficacy scores. Examination of the relationship between attitude and self-efficacy found a significantly positive relationship between the two measures suggesting that the two constructs are related. Implication of such findings and directions for future research are outlined in detail in the Discussion section of this thesis.