预应力结构抗滑桩设计计算方法及其在滑坡治理中的应用研究

Landslide is a kind of serious geological hazards and its damage is very great. In recent years, landslides become more and more frequent along with increase of scale of engineering constructions and cause greater loss. Consequently, how to protect landslides has become important research subject in the engineering field. This paper improves the method how to compute landslide thrust and solves the irrational problem in the design of piles because of the irrational landslide thrust according to the theory and technology of existed anti-slide piles and pre-stressed cable anti-slide piles. Modern pre-stressing technology has been introduced and load balancing method has been used to improve the stressing behavior of anti-slide piles. Anchor cables, anti-slide piles and modern pre-stressing technology have been used to prevention complicated landslide. It is an important base to select values for the landslide thrust. An improved method to calculate design thrust of anti-slide piles has been presented in this paper on the base of residual thrust method by comparing existing methods to select values of landslide thrust in the design of anti-slide piles. In the method, residual landslide thrust behind the anti-slide piles and residual skid resistance before the piles has been analyzed, equitable distribution of residual landslide thrust behind the piles has been realized, and the method to select value of design thrust becomes more reasonable. The pre-stressed cable anti-slide piles are developed from the common anti-slide piles and are common method to prevent landslide. Their principle is that internal force of anti-slide piles is adjusted and size of section is diminished by changing constraint conditions of anti-slide piles. For landslides with deep slip surface and large scale of slopes, limitation of the method appears. Such landslides are in need of long piles and anchor cables which are not only non-economic but also can generate larger deformation and leave potential danger after prevention. For solving the problem, a new kind of anti-slide piles, inner pre-stressing force anti-slide piles, is presented in this paper, and its principle is that an additional force, which is generated in the inner anti-slide piles by arranging pre-stressed reinforcement or tight wire in a certain form in interior of anti-slide piles and stretching the steel reinforcement or tight wire, may balance out the internal force induced by landslide thrust whole or partly (load balancing method). The method will change bending moment which anti-slide piles are not good at bearing into compressive stress which piles are good at bearing, improve stressing performance of anti-slide piles greatly, diminish size of section, and make anti-slide piles not fissured in the natural service or postpone appearance of the fissures, and improve viability of anti-slide piles. Pre-stressed cable anti-slide piles and inner pre-stressing force anti-slide piles go by the general name of pre-stressed structure anti-slide piles in the paper, and their design and calculation method is also analyzed. A new calculation method is provided in the paper for design of anti-slide piles. For pre-stressed structure anti-slide piles, a new computation mode is firstly presented in the paper on the foundation of cantilever piles. In the mode, constraint form of load-bearing section of the anti-slide piles should be confirmed according to reservoir conditions in order to figure out amount of pre-stress of the anchor cables, and internal force should be analyzed for the load-bearing section of pre-stressed structure anti-slide piles so as to confirm anchorage section of anti-slide piles. Pre-stressed cables of the pre-stressed cable anti-slide piles can be arranged as required. This paper analyzes the load-bearing section of single-row and double-row pre-stressed cable anti-slide piles and provides a calculation method for design of the pre-stressed cable anti-slide piles. Inner pre-stressing force anti-slide piles are a new kind of structural style. Their load-bearing section is divided into four computation modes according to whether pre-stressed cables are applied for exterior of the anti-slide piles, and whether single-row or double-row exterior pre-stressed cables are applied. The load balancing method is used to analyze the computation modes for providing a method to design the inner pre-stressing force anti-slide piles rationally. Pre-stressed cable anti-slide piles and inner pre-stressing force anti-slide piles are applied to research on Mahe landfall in Yalong Lenggu hydropower station by the improved method to select value of design thrust of anti-slide piles. A good effect is obtained in the analysis.

荣成基底片麻岩原岩岩石成因及其构造意义

Extensive high to ultrahigh pressure metamorphic rocks are outcropped in the the Dabie-Sulu UHP orogenic belt. Disputes still exist about for protolith nature of metamorphic rocks, petrogenesis, tectonic setting, and influence on upper mantle during the Triassic deep subduction. In this study, a combined study of petrology, geochemistry, isotope geochemistry and zircon chronology was accomplished for high-grade gneisses in the basement of the ultrahigh-pressure metamorphic Rongcheng terrane to reveal protolith nature and petrogenesis of the gneisses and to disucss the magmatic succession along the northern margin of the Yangtze block in Neoproterozoic. Gneisses in the Rongcheng terrane are characterized by negative Nb, Ta, P and Ti anomalies, relatively low Sr/Y ratios and relatively high Ba/La, Ba/Nb and Ba/Zr ratios, mostly displaying geochemical affinity to Phanerozoic volcanic arc. Neoproterozoic protolith ages (0.7 ~ 0.8 Ga) and Paleoproterozoic average crustal residence time (1.92 ~ 2.21 Ga) favour a Yangtze affinity. The gneisses mostly display characteristics of enrichment of LREE, flat heavy rare earth elements (REE) patterns, moderately fractionation between LREE and HREE and slight negative or positive Eu anomalies, probably reflecting that melting took place in the middle to low crust (26 ~ 33 km), where amphibole fractionated from the melts and/or inherited from source material as major mineral phases in the source area. Sr-Nd isotopic composition of the gneisses supports this conclusion. According to εNd(t) and εHf(t) values, the gneisses can be divided into three groups. Gneisses of group I have the highest εNd(t) and εHf(t) values, corresponding to the range of -6 ~ -3 and -2.9 ~ 13.4, respectively. This suggests obvious influx of depleted mantle or juvenile crust in the formation of protoliths. Gneisses of group II have medium εNd(t) (-9 ~ -7) and εHf(t) values (-15.8 ~ -1.4), corresponding to relatively high TDM2(Nd) (1.99 ~ 2.31 Ga) and TDM2(Hf) (1.76 ~ 2.67 Ga) , respectively. This suggests these gneisses were formed by partial melting of Paleoproterozoic crust. Gneisses of group III have the lowest εNd(t) (-15 ~ -10) and εHf(t) values (-15.8 ~ -1.4), corresponding to the largest TDM2(Nd) (1.99 ~ 2.31 Ga) and TDM2(Hf) ( 1.76 ~ 2.67 Ga), respectively. This indicates that gneisses of group III were formed by remelting of Archean crustal material and further demonstrates existence of an Archean basement probably of the Yangtze affinity beneath the Rongcheng terrane. Gneisses of three groups have also certain different geochemical characteristics. Contents of REEs and trace elements reduce gradually from group I to group III. Zirconium saturation temperatures also show similar tendency. Compared to gneisses of group II and group III, gneisses of group I display geochemical feature similar to extensional tectonic setting, having relatively little influence by the source area. Therefore, geochemical characteristics for gneisses of group I can indictate that the protoliths of the Rongcheng gneisses formed in an extensional rifting tectonic setting. This conclusion is supported by the results of eclogites and gabbros previously reported in the Dabie-Sulu orogenic belt. Statistical results of the protolith ages of the Rongcheng gneisses show two age peaks around ~728 Ma and ~783 Ma with an about 50 Ma gap. Extensive magatism in abou 750 Ma along the northern margin of the Yangtze block can hardly be observed in the Rongcheng terrane. This phenomenon likely suggests discontinuous Neoproterozoic magmatism along the northern margin of the Yangtze block.

大港千米桥地区综合地质地球物理研究

Qianmiqiao buried hill, which is a high-yield burial hill pool, was discovered at Dagang oilfield in 1998. To employ the integrated geological and geophysical research at Qianmiqiao area, it is very valuable and meaningful for the petroleum exploration of Bohai Bay Basin and even the whole country. Based on the previous results, this paper is carried out from the research on Huanghua depression, following the law, i.e. the deep part constrains the shallow, the regional constrains the local, takes the geophysical research in Qianmiqiao oilfield, discusses the formation history of burial hills, burial history, thermal history, the generated and expelling history of hydrocarbon, and migration characteristics, probes into the formation of burial hill pool. This paper uses the gravity and magnetic methods which are based on potential field, with natural sources, configures the inner structure of the earth according to the difference in the density and magnetism of the rock. The geophysical characteristics of Dagang oil field is that it is an area with positive Buge gravity anomal. The upheaval of Moho boundary is in mirror symmetry with the depression of the basin's basement. The positive and negative anomaly distributein axis symmetry, and the orientation is NNE. The thickness of the crust gradually reduces from west to east, from land to sea. The depth gradient strip of Curie surface is similar to Moho boundary, whereas their local buried depth is different. Local fractures imply that the orientation of base rock fractures is NNE-NE, and the base rock is intersected by the fractures of the same/ later term, whose orientation is NW, so the base rock likes rhombic mosaic. The results of tomography show that there exists significant asymmetry in vertical and horizontal direction in the velocity configuration of Huanghua depression. From Dezhou to Tianjin, there exits high-speed block, which extends from south to north. The bottom of this high-speed block is in good agreement with the depth of Moho boundary. Hence we can conclude that the high-speed block is actually the crystal basement. According to seismic data, well data and outcrop data, Huanghua depression can be divided into four structure layers, i.e. Pi,2-T, Ji,2-K, E, N-Q. Qianmiqiao burial hills undergo many tectonic movement, where reverse faults in developed in inner burial hill from Indosinian stage to Yanshanian stage, the normal faults extended in Himalayan stage. Under the influence of tectonic movements, the burial hills show three layers, i.e. the reverse rushing faults in buried hills, paleo-residual hill, and extended horst block. The evolution of burial hills can be divided into four stages: steady raising period from Calenonian to early Hercynian, rushing brake drape period from Indosinian to middle Yanshanian, block tilting period in early Tertiary, and heating depression period from late Tertiary to Quaternary. The basin modeling softwares BasinMod 1-D and Basin 2-D, which are made by PRA corporation, are used in this paper, according to the requirement, corresponding geological model is designed. And we model the burial history, thermal history, hydrocarbon generation and hydrocarbon expelling history of Qianmiqiao area. The results show that present bury depth is the deepest in the geological history, the sedimentary rate of Tertiary is highest and its rising rate of temperature rate is higher. During sedimentary history, there is no large erosion, and in the Tertiary, the deeper sediment was deposited in large space, therefore it is in favor of the conservation and transformation of oil and gas. The thermal research shows that the heat primarily comes from basement of the basin, present geotherm is the highest temperature in the geological history. Major source rock is the strata of ES3, whose organic is abundant, good-typed, maturative and of high-expulsive efficiency. The organic evolution of source rock of O has come to the overmature stage, the evolving time is long and the source rock can be easily destroyed. Therefore it is more difficult for the O formation source rock to form the huge accumulation of oil and gas than Es3 formation. In the research of oil assembling, we first calculated the characteristics of the fluid pressure of single well, then analyzed the distribution of the surplus fluid pressure of each formation and profile, and probe the first hydrocarbon migration situation and the distribution of pressure system of buried hill pool. In every formation, the pressure system of each burial hill has its own characteristics, e.g. high pressure or low pressure. In the research of secondary migration, the fluid potential is calculated while the relative low potential area is figured out. In Qianmiqiao area, the west margin faults have the low potential, and hence is the favorable reconnoiter belt.

胶北晚中生代煌斑岩的岩石地球化学特征及其成因研究

胶北煌斑岩分别采自龙口、烟台和威海地区，包括拉辉煌斑岩、斜闪正煌岩和角闪煌斑岩，煌斑岩K—Ar全岩年龄变化于89．3～169．5Ma，为晚中生代岩浆活动的产物。在岩石化学组成上，SiO2=42．02％～54．95％，以钙碱性系列为主．岩石以富集大离子亲石元素（LILE）（Ba，U，K，Th）和LREE，亏损高场强元素（HFSE）（Nb，Ta和Ti）为特征，Mg^#=33．9～53．9，Eu／Eu^＊=0．71～0．89，^87Sr／^86Sr初始比值0．707642～0．709791，εNd（t）为-17．6～-10．4，^206Pb／^204Pb=37．588～38．431，^207Pb／^204Pb=15．423～15．531，^206Pb／^204Pb=17．204～18．179。表明煌斑岩源自俯冲陆壳（扬子下地壳）在地幔源区发生交代作用时形成的富集型地幔的部分熔融体．考虑到煌斑岩具有大陆边缘弧玄武岩的特征，我们认为煌斑岩在成因上同样与古大洋板块的俯冲作用有关，为碰撞后弧岩浆作用形成的脉岩。

慢性海洛因成瘾者的冲动性和行为抑制缺陷脑机制

In recent years, the deficit of inhibition has become an important reason for explaining addiction. Response inhibition resembles the compulsive drug seeking behavior and it is the basement of addiction inhibition deficits. However, there were no enough evidence for the relationship between addiction and response inhibition deficits and the results of the neuro mechanisms studies remains unclear. Few studies has focused on the exploring the heroin users. Among those paradigms for study response inhibition deficits, stop signal is a very suitable model for the representation of compulsive drug seeking, but only a few researches has worked on this paradigm. In this study, we selected about 100 heroin abusers and had behaviour and neuro imaging scannings for investigating the response inhibition deficits. The behaviour researches found: first, the chronic heroin users had longer reaction time than control group and this reaction time were not affected by stop signals in heroin users. Second, heroin users had less waiting time than control group and they were more impulsive but less flexibility. Their erro monitoring and flexibale adjustment ability decreased. Third, the SSRT of heroin users was significantly longer than control group. These results suggested that the inhibition of heroin users were impaired. Further investigation showed that the SSRT of heroin users had positive correlation of four factor scores of ASI and the macro correlation coefficient was factor three of drug use. This correlation suggested that drug use was the main reason of inhibition deficits. fMRI results mainly focused on the ANOVA analysis for group difference. First, there was no intensity difference in M1 and SMA brain areas between the two groups. Second, heroin users had less activation in right dorsalateral prefrontal cortex, right inferior prefrontal cortex and anterior cingulated cortex, while in bilateral striatum and amygdala, heroin users had more activation than control group. The right prefrontal cortex was indentified as the main inhibition brain area. The anterior cingulated cortex has relationship with erro monitoring and amygdale was an important brain area for impulsivity and emotion control. The network of these brain areas was envovled in impulsivity and inhibition and it was suggested the mainly damaged network for heroin users’ disinhibition. We also investigated the gray matter changes of heroin users and found that chonic heroin use made their gray matter density decreased in prefrontal cortex (including bilateral dorsalateral prefrontal cortex, obital frontal cortex, inferior prefrontal cortex) and anterior cingulated cortex. The gray matter density in these brain regions had negative correlation with drug use duration. In conclusion, we indentified the disinhibition of heroin users and its neuro mechanism. Their compulsivity brain areas had more activation than control group and their inhibition brain areas had less activation than normal control. On the other side, the biological mechanism of this activation changes was the gray matter density decrease in these brain areas.

Teaching by Example in Food Assembly by Robot

T. G. Williams, J.J. Rowland, Lee M.H. and M.J. Neal Teaching by Example in Food Assembly by Robot, Proc. 2000 IEEE Int. Conf. On Robotics and Automation, San Francisco, April 2000, pp3247-52.

Body composition and bone mineral density changes during a premier league season as measured by dual-energy X-ray absorptiometry

Wallace, Joanne, et al., 'Body composition and bone mineral density changes during a premier league season as measured by dual-energy X-ray absorptiometry', International Journal of Body Composition Research (2006) 4(2) pp.61-66 RAE2008

Ukryty punkt krytyczny w mieszaninach binarnych – badania metodami symulacji Monte – Carlo

Wydział Fizyki

A pré-existência no contexto da reabilitação

Dissertação apresentada à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Arquitetura e Urbanismo

Electromagnetic tracking and steering for catheter navigation

This thesis explores the use of electromagnetics for both steering and tracking of medical instruments in minimally invasive surgeries. The end application is virtual navigation of the lung for biopsy of early stage cancer nodules. Navigation to the peripheral regions of the lung is difficult due to physical dimensions of the bronchi and current methods have low successes rates for accurate diagnosis. Firstly, the potential use of DC magnetic fields for the actuation of catheter devices with permanently magnetised distal attachments is investigated. Catheter models formed from various materials and magnetic tip formations are used to examine the usefulness of relatively low power and compact electromagnets. The force and torque that can be exerted on a small permanent magnet is shown to be extremely limited. Hence, after this initial investigation we turn our attention to electromagnetic tracking, in the development of a novel, low-cost implementation of a GPS-like system for navigating within a patient. A planar magnetic transmitter, formed on a printed circuit board for a low-profile and low cost manufacture, is used to generate a low frequency magnetic field distribution which is detected by a small induction coil sensor. The field transmitter is controlled by a novel closed-loop system that ensures a highly stable magnetic field with reduced interference from one transmitter coil to another. Efficient demodulation schemes are presented which utilise synchronous detection of each magnetic field component experienced by the sensor. The overall tracking accuracy of the system is shown to be less than 2 mm with an orientation error less than 1°. A novel demodulation implementation using a unique undersampling approach allows the use of reduced sample rates to sample the signals of interest without loss of tracking accuracy. This is advantageous for embedded microcontroller implementations of EM tracking systems. The EM tracking system is demonstrated in the pre-clinical environment of a breathing lung phantom. The airways of the phantom are successfully navigated using the system in combination with a 3D computer model rendered from CT data. Registration is achieved using both a landmark rigid registration method and a hybrid fiducial-free approach. The design of a planar magnetic shield structure for blocking the effects of metallic distortion from below the transmitter is presented which successfully blocks the impact of large ferromagnetic objects such as operating tables. A variety of shielding material are analysed with MuMetal and ferrite both providing excellent shieling performance and an increased signal to noise ratio. Finally, the effect of conductive materials and human tissue on magnetic field measurements is presented. Error due to induced eddy currents and capacitive coupling is shown to severely affect EM tracking accuracy at higher frequencies.

Site Report for Phase III Archaeological Investigations at Reynolds Tavern (18AP23), 4 Church Circle, Annapolis, Maryland. 1982-1984

This report details the archaeology completed at Reynolds Tavern in the years 1982,1983, and 1984. It was completed in 2013, nearly 30 years after the excavation took place, using archival materials such as the draft interim reports, unit summary forms, original notes and photographs which are currently stored in the University Archives at Hornbake Library, at the University of Maryland, College Park. This report has been a collaboration across time and space, drawing from preliminary reports written by Anne Yenstch and Susan Mira in 1982 and Joe Dent and Beth Ford in 1983, as well as original notes from students of the field schools held there during those years, various analyses by scholars from many universities (including the University of Maryland, University of Georgia, and the College of William and Mary), and historical research by Nancy Baker. Thomas Cuddy began the writing of this report in 2002, completing the first three chapters in addition to the artifact analysis that led to the postexcavation identification of the African bundles in the Reynolds Tavern basement. This remarkable discovery was made along with Mark Leone of the University of Maryland, founder and director of Archaeology in Annapolis, who also served as the Principle Investigator during all three years of the Reynolds Tavern excavations. Dr. Leone contributed the fifth and final chapter to this report, the Conclusions and Recommendations, during its final compilation in 2013. The final report, including the fourth chapter on the archaeology itself, was written in part and compiled by Patricia Markert of the University of Maryland in the spring of 2013. Reynolds Tavern has been part of the landscape of Annapolis for two-hundred and fifty five years (at the time of the publication of this report). It sits on Church Circle facing St. Anne’s Church, and is a beautiful example of 18th century Georgian architecture as well one of the defining features of Historic Annapolis today. It currently operates as a popular restaurant and pub, but has served variously as a hat shop, a tavern, an inn, a library and a bank over time, among other things. Its long history contributes to its significance as an archaeological site, and also as a historic marker in present day Annapolis. The archaeology conducted at Reynolds Tavern shed light on life in 18th and 19th century Annapolis, illuminating details of the occupants’ lives through the material traces they left behind. These include an 18th century cobblestone road that ran diagonally through the Tavern’s yard, telling of the movement through early Annapolis; a large and intact well, which was found ii to contain a 19 foot wooden pipe; a large, ovular privy containing many of the objects used on a day to day basis at the Tavern or the structures around it; a subterranean brick storage feature in the basement of the Tavern, which may have been used by Reynolds during his days operating a hat shop; and also in the basement, two African caches of objects, providing a glimpse into West African spiritual practices alive in historic Annapolis and the presence of African American individuals at the Tavern in the 18th and 19th centuries. The purpose of this report is to detail these archaeological investigations and their findings, so that a public record will be available and the archaeology completed at Reynolds Tavern can continue to contribute to the history of Annapolis.

Humoral and B-cell memory responses in children five years after pertussis acellular vaccine priming.

The resurgence of pertussis suggests the need for greater efforts in understanding the long-lasting protective responses induced by vaccination. In this paper we dissect the persistence of humoral and B-cell memory responses induced by primary vaccination with two different acellular pertussis (aP) vaccines, hexavalent Hexavac(®) vaccine (Hexavac) (Sanofi Pasteur MSD) and Infanrix hexa(®) (Infanrix) (GlaxoSmithKline Biologicals). We evaluated the specific immune responses in the two groups of children, 5 years after primary vaccination by measuring the persistence of IgG and antibody secreting cells (ASC) specific for vaccine antigens. Part of the enrolled children received only primary vaccination, while others had the pre-school boost dose. A similar level of antigen-specific IgG and ASC was found in Infanrix and Hexavac vaccinated children. The mean IgG levels were significantly higher in children that received the pre-school boost as compared with children that did not receive the boost dose. A longer persistence after the pre-school boost of IgG-Pertussis Toxin (PT) and IgG-pertactin levels was observed in Infanrix primed children, but it was not statistically significant. More than 80% of children presented a positive ASC B memory response. Around 50% of children still presented protective IgG-PT levels which are reduced to 36% in no-boosted children. The pre-school booster dose restores the percentage of protected children above 50%. In conclusion our data underline the importance of giving a booster dose 5 years after primary vaccination and suggest the need for a new vaccine able to induce a long lasting protective response.

Efectos de tratamientos de presiembra sobre el comportamiento a campo de semillas de zanahoria y pimiento

p.173-181

Uncertainty analysis to minimise risk in designing micro-electronics manufacturing processes

A design methodology based on numerical modelling, integrated with optimisation techniques and statistical methods, to aid the process control of micro and nano-electronics based manufacturing processes is presented in this paper. The design methodology is demonstrated for a micro-machining process called Focused Ion Beam (FIB). This process has been modelled to help understand how a pre-defined geometry of micro- and nano- structures can be achieved using this technology. The process performance is characterised on the basis of developed Reduced Order Models (ROM) and are generated using results from a mathematical model of the Focused Ion Beam and Design of Experiment (DoE) methods. Two ion beam sources, Argon and Gallium ions, have been used to compare and quantify the process variable uncertainties that can be observed during the milling process. The evaluations of the process performance takes into account the uncertainties and variations of the process variables and are used to identify their impact on the reliability and quality of the fabricated structure. An optimisation based design task is to identify the optimal process conditions, by varying the process variables, so that certain quality objectives and requirements are achieved and imposed constraints are satisfied. The software tools used and developed to demonstrate the design methodology are also presented.

A Cross-modal Approach for Karaoke Artifacts Correction

Karaoke singing is a popular form of entertainment in several parts of the world. Since this genre of performance attracts amateurs, the singing often has artifacts related to scale, tempo, and synchrony. We have developed an approach to correct these artifacts using cross-modal multimedia streams information. We first perform adaptive sampling on the user's rendition and then use the original singer's rendition as well as the video caption highlighting information in order to correct the pitch, tempo and the loudness. A method of analogies has been employed to perform this correction. The basic idea is to manipulate the user's rendition in a manner to make it as similar as possible to the original singing. A pre-processing step of noise removal due to feedback and huffing also helps improve the quality of the user's audio. The results are described in the paper which shows the effectiveness of this multimedia approach.