Caracterização e ocorrência de bidens mosaic virus (bimv) em regiões produtoras de alface no Estado de São Paulo

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

RT-PCR for confirmation of echovirus 30 isolated in Belém, Brazil

Echovirus (Echo) 30 or human enterovirus B is the most frequent enterovirus associated with meningitis cases. Epidemics and outbreaks of this disease caused by Echo 30 have occurred in several countries. In Brazil, Echo 30 has been isolated from sporadic cases and outbreaks that occurred mainly in the south and southeast regions. We used RT-PCR to examine Echo 30 isolates from meningitis cases detected from March 2002 to December 2003 in Belém, state of Pará, in northern Brazil. The patients were attended in a Basic Health Unit (State Health Secretary of Pará), where cerebrospinal fluid (CSF) was collected and stored in liquid nitrogen. Weekly visits were made by technicians from Evandro Chagas Institute to the health unit and samples were stored at -70ºC in the laboratory until use. HEp-2 and RD cell lines were used for viral isolation and neutralization with specific antisera for viral identification. RNA extraction was made using Trizol reagent. The RT-PCR was made in one step, and the total mixture (50 µL) was composed of: RNA, reaction buffer, dNTP, primers, Rnase inhibitor, reverse transcriptase, Taq polymerase and water. The products were visualized in agarose gel stained with ethidium bromide, visualized under UV light. Among the 279 CSF samples examined, 30 (10.7%) were EV positive, 29 being Echo 30 and one was Cox B. Nineteen Echo 30 were examined with RT-PCR; 18 tested positive (762 and 494 base pairs). The use of this technique permitted viral identification in less time than usual, which benefits the patient and is of importance for public-health interventions.

Comportamento de fratura sob carga estática e cíclica das cerâmicas odontológicas quando unidas a um substrato análogo à dentina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Híbridos luminescentes à base de sílica e complexos de európio: ferramenta para análise em meio biológico

Pós-graduação em Química - IQ

Aspectos da produtividade do feijoeiro correlacionados com atributos do solo sob sistemas de manejo de elevado nível tecnológico

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise teórica e experimental do comportamento de vigas de alvenaria estrutural armada sujeitas à flexão simples

Pós-graduação em Engenharia Civil - FEIS

Controle robusto chaveado de sistemas lineares variantes no tempo com aplicação em falhas estruturais

Pós-graduação em Engenharia Elétrica - FEIS

Resistência à fratura entre a resina acrílica e a resina composta em coroas provisórias implanto-suportadas unitárias imediatas anteriores: estudo in vitro

Pós-graduação em Reabilitação Oral - FOAR

Multiple-trait genomic evaluation for milk yield and milk quality traits using genomic and phenotypic data in buffalo in Brazil

The use of markers distributed all long the genome may increase the accuracy of the predicted additive genetic value of young animals that are candidates to be selected as reproducers. In commercial herds, due to the cost of genotyping, only some animals are genotyped and procedures, divided in two or three steps, are done in order to include these genomic data in genetic evaluation. However, genomic evaluation may be calculated using one unified step that combines phenotypic data, pedigree and genomics. The aim of the study was to compare a multiple-trait model using only pedigree information with another using pedigree and genomic data. In this study, 9,318 lactations from 3061 buffaloes were used, 384 buffaloes were genotyped using a Illumina bovine chip (Illumina Infinium (R) bovineHD BeadChip). Seven traits were analyzed milk yield (MY), fat yield (FY), protein yield (PY), lactose yield (LY), fat percentage (F%), protein percentage (P%) and somatic cell score (SCSt). Two analyses were done: one using phenotypic and pedigree information (matrix A) and in the other using a matrix based in pedigree and genomic information (one step, matrix H). The (co) variance components were estimated using multiple-trait analysis by Bayesian inference method, applying an animal model, through Gibbs sampling. The model included the fixed effects of contemporary groups (herd-year-calving season), number of milking (2 levels), and age of buffalo at calving as (co) variable (quadratic and linear effect). The additive genetic, permanent environmental, and residual effects were included as random effects in the model. The heritability estimates using matrix A were 0.25, 0.22, 0.26, 0.17, 0.37, 0.42 and 0.26 and using matrix H were 0.25, 0.24, 0.26, 0.18, 0.38, 0.46 and 0.26 for MY, FY, PY, LY, % F, % P and SCCt, respectively. The estimates of the additive genetic effect for the traits were similar in both analyses, but the accuracy were bigger using matrix H (superior to 15% for traits studied). The heritability estimates were moderated indicating genetic gain under selection. The use of genomic information in the analyses increases the accuracy. It permits a better estimation of the additive genetic value of the animals.

Multiplex-PCR for differentiation of Mycobacterium bovis from Mycobacterium tuberculosis complex

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho adesivo de sistemas de união à dentina aplicados in vivo e in vitro: efeito da pressão intrapulpar e profundidade dentinária

O objetivo do presente estudo foi investigar a influência da pressão intrapulpar e da profundidade dentinária sobre o desempenho adesivo de dois agentes de união à dentina, Single Bond (3M ESPE, St. Paul, MN, EUA) e Clearfil SE Bond (Kuraray, Tokyo, Japão), aplicados in vitro e in vivo. Quarenta e oito prémolares superiores hígidos foram selecionados e os pares pertencentes aos mesmos pacientes foram aleatoriamente distribuídos em 4 grupos experimentais de acordo com o sistema adesivo e a pressão intrapulpar, presente ou ausente. Dos dentes pertencentes ao mesmo par, um foi tratado in vivo e o outro in vitro. A ausência ou presença de pressão intra-pulpar foi determinada in vivo pelo uso de anestésicos locais com ou sem vasoconstritor, respectivamente. In vitro, os dentes foram mantidos sob pressão hidrostática de 15 cm de água por 24 horas. Cavidades de classe I foram preparadas e os sistemas adesivos aplicados de acordo com a recomendação dos fabricantes, seguidos da restauração incremental em resina composta. Para os dentes tratados in vitro, os mesmos procedimentos restauradores foram realizados após 6 meses de armazenagem em solução contendo timol 0,1%. Espécimes com área de secção transversal de 1 mm2 foram obtidos e submetidos ao ensaio mecânico de microtração. In vivo, ambos os sistemas adesivos apresentaram desempenho adesivo comparável, enquanto in vitro, o sistema Single Bond foi superior ao sistema Clearfil SE Bond. Esse último não foi influenciado por nenhuma das variáveis estabelecidas no estudo, ou seja, aplicação in vitro ou in vitro, presença de pressão intrapulpar e profundidade em dentina. O sistema Single Bond aplicado sob pressão intrapulpar positiva sofreu variação significante de resistência de união em função da profundidade da dentina, ou seja, em dentina profunda seu desempenho adesivo... (Resumo completo, clicar acesso eletrônico abaixo)

Proteins, Pathogens, and Failure at the Composite-Tooth Interface

In the United States, composites accounted for nearly 70% of the 173.2 million composite and amalgam restorations placed in 2006 (Kingman et al., 2012), and it is likely that the use of composite will continue to increase as dentists phase out dental amalgam. This trend is not, however, without consequences. The failure rate of composite restorations is double that of amalgam (Ferracane, 2013). Composite restorations accumulate more biofilm, experience more secondary decay, and require more frequent replacement. In vivo biodegradation of the adhesive bond at the composite-tooth interface is a major contributor to the cascade of events leading to restoration failure. Binding by proteins, particularly gp340, from the salivary pellicle leads to biofilm attachment, which accelerates degradation of the interfacial bond and demineralization of the tooth by recruiting the pioneer bacterium Streptococcus mutans to the surface. Bacterial production of lactic acid lowers the pH of the oral microenvironment, erodes hydroxyapatite in enamel and dentin, and promotes hydrolysis of the adhesive. Secreted esterases further hydrolyze the adhesive polymer, exposing the soft underlying collagenous dentinal matrix and allowing further infiltration by the pathogenic biofilm. Manifold approaches are being pursued to increase the longevity of composite dental restorations based on the major contributing factors responsible for degradation. The key material and biological components and the interactions involved in the destructive processes, including recent advances in understanding the structural and molecular basis of biofilm recruitment, are described in this review. Innovative strategies to mitigate these pathogenic effects and slow deterioration are discussed.

Hepatitis C virus molecular evolution: Transmission, disease progression and antiviral therapy

Hepatitis C virus (HCV) infection represents an important public health problem worldwide. Reduction of HCV morbidity and mortality is a current challenge owned to several viral and host factors. Virus molecular evolution plays an important role in HCV transmission, disease progression and therapy outcome. The high degree of genetic heterogeneity characteristic of HCV is a key element for the rapid adaptation of the intrahost viral population to different selection pressures (e.g., host immune responses and antiviral therapy). HCV molecular evolution is shaped by different mechanisms including a high mutation rate, genetic bottlenecks, genetic drift, recombination, temporal variations and compartmentalization. These evolutionary processes constantly rearrange the composition of the HCV intrahost population in a staging manner. Remarkable advances in the understanding of the molecular mechanism controlling HCV replication have facilitated the development of a plethora of direct-acting antiviral agents against HCV. As a result, superior sustained viral responses have been attained. The rapidly evolving field of anti-HCV therapy is expected to broad its landscape even further with newer, more potent antivirals, bringing us one step closer to the interferon-free era. (C) 2014 Baishideng Publishing Group Inc. All rights reserved.

Transformações de Lorentz e seus invariantes

In this paper, we will show the types of Lorentz transformations, from the most described in books, special Lorentz transformation that relates two inertial systems whose relative velocities are directed along an axis of the respective bases systems. However, we will see a peculiarity that goes unnoticed in this transformation, although they have reported in many books a parallel between the transformation inertial systems, due to the fact that the speed is parallel to an axis, it is actually a semi-parallel processing. The next transformation that we will see is one in which a system moves with a relative speed that has arbitrary direction with respect to a given system, we will show that this transformation may be appointed as non-rotational Lorentz transformation. Before obtain, the later type of transformation, the rotational Lorentz transformation, which is the interface between Special Relativity and General Relativity, we will describe the systems to be rotated, not just inertial systems, show what the characteristics are that define the non-rotational and rotational transformations. The in last topic of this chapter we will also show how the idea of Thoma’s theorythat uses this transformation to create what he defines as the proper coordinate axes of the particleused to obtain the factor 1/2 electron spin. In the last chapter we show how the Lorentz invariants are obtained, quantities measures that are also in different Lorentz reference, with the focus on mass that has erroneously been described in many books, that varies according to the agreement reference system

Melhoria da qualidade de um processo de usinagem utilizando as técnicas de avaliação de Taguchi

Delivering to the customers a product or service with the expected quality associated to the huge competitiveness that exists in the market nowadays, has been making organizations increasingly focus on quality planning using techniques which are directed towards the continuous improvement process and production optimization. Thus, this paper aims to improve a machining process using the techniques of experimental design to the optimization and this also includes the analysis of the measurement system. For this purpose, the alloy Nimonic 80A, a nickel base superalloy, was used in the process due to its widespread use for high temperatures, applying this study the robust method proposed by Genichi Taguchi, determining the influence of the factors considered input variables, cutting speed, feed rate, depth of cut, type of tool, lubrication, and material hardness, in the output or response variable, surface roughness, concluding with the use of Taguchi orthogonal array L16 and by analysis of ANOVA that the factor feed rate is significant and offers greater effect on the response variable studied, should be set to 0,12mm/rev. Moreover, the factor type of tool has more influence on the process when compared to other factors, being CP250 the one more suitable to the process. Lastly, the interaction feed rate x cutting speed provides greater significance in the process regarding to surface roughness variable, being the best match between them 0,12mm/rev to the feed rate and 90m/min to the cutting speed. In order to evaluate the measurement system, it was applied the repeatability and reproducibility method (R&R), through which we saw that the system needs improvement (R & R = 88.04% >>> 30%) as the value found in the study was well above compared to the one that classifies the system as inappropriate