Influence of different solvents on the structural, optical and morphological properties of CdS nanoparticles

CdS is one of the most important II-VI semiconductors, with applications in solar cells, optoelectronics and electronic devices. CdS nanoparticles were synthesized via microwave-assisted solvothermal technique. Structural and morphological characterization revealed the presence of crystalline structures presenting single phase with different morphologies such as ""nanoflowers"" and nanoplates depending on the solvent used. Optical characterization was made by diffuse reflectance and photoluminescence spectroscopy, revealing the influence of the different solvents on the optical properties due to structural defects generated during synthesis. It is proposed that these defects are related to sulfur vacancies, with higher concentration of defects for the sample synthesized in ethylene glycol in comparison with the one synthesized in ethylene diamine. (C) 2011 Elsevier B.V. All rights reserved.

A Morphological View of the Sodium 4,4 `-Distyrylbiphenyl Sulfonate Fluorescent Brightness Distribution on Regenerated Cellulose Fibers

Evidence of the sorption of the whitening agent sodium 4,4`-distyrylbiphenyl sulfonate in the presence of the anionic surfactant sodium dodecylsulfate or the cationic surfactant dodecyl trimethyl ammonium chloride on regenerated cellulose fibers is given by several microscopy techniques. Scanning electron microscopy provided images of the cylindrical fibers with dimensions of 3.5 cm (length) and 13.3 mu m (thickness), with empty cores of 1 mu m diameter and a smooth surface. Atomic force microscopy showed a fiber surface with disoriented nanometric domains using both tapping-mode height and phase image modes. Atomic force microscopy also showed that the whitening agent and surfactant molecules were sorbed onto the fiber surface, in agreement with the adsolubilization sorption model. Transmission electron microscopy showed fibers with nanometric parallel cylinders, surrounded by holes where the fluorescent whitening molecules accumulated. On the basis of these techniques, we conclude that the sorption process occurs preferentially on the fiber surface in contact with the water solution, and under saturated conditions, the whitening agent penetrates into the pores and are simultaneously sorbed on the pore walls bulk, forming molecular aggregates. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 2321-2327, 2010

Multilevel Training of Binary Morphological Operators

The design of binary morphological operators that are translation-invariant and locally defined by a finite neighborhood window corresponds to the problem of designing Boolean functions. As in any supervised classification problem, morphological operators designed from a training sample also suffer from overfitting. Large neighborhood tends to lead to performance degradation of the designed operator. This work proposes a multilevel design approach to deal with the issue of designing large neighborhood-based operators. The main idea is inspired by stacked generalization (a multilevel classifier design approach) and consists of, at each training level, combining the outcomes of the previous level operators. The final operator is a multilevel operator that ultimately depends on a larger neighborhood than of the individual operators that have been combined. Experimental results show that two-level operators obtained by combining operators designed on subwindows of a large window consistently outperform the single-level operators designed on the full window. They also show that iterating two-level operators is an effective multilevel approach to obtain better results.

Phenolic matrices and sisal fibers modified with hydroxy terminated polybutadiene rubber: Impact strength, water absorption, and morphological aspects of thermosets and composites

The aim of the present work was to investigate the toughening of phenolic thermoset and its composites reinforced with sisal fibers, using hydroxyl-terminated polybutadiene rubber (HTPB) as both impact modifier and coupling agent. Substantial increase in the impact strength of the thermoset was achieved by the addition 10% of HTPB. Scanning electron microscopy (SEM) images of the material with 15% HTPB content revealed the formation of some rubber aggregates that reduced the efficiency of the toughening mechanism. In composites, the toughening effect was observed only when 2.5% of HTPB was added. The rubber aggregates were found located mainly at the matrix-fiber interface suggesting that HTPB could be used as coupling agent between the sisal fibers and the phenolic matrix. A composite reinforced with sisal fibers pre-impregnated with HTPB was then prepared; its SEM images showed the formation of a thin coating of HTPB on the surface of the fibers. The ability of HTBP as coupling agent between sisal fibers and phenolic matrix was then investigated by preparing a composite reinforced with sisal fibers pre-treated with HTPB. As revealed by its SEM images, the HTPB pre-treatment of the fibers resulted on the formation of a thin coating of HTPB on the surface of the fibers, which provided better compatibility between the fibers and the matrix at their interface, resulting in a material with low water absorption capacity and no loss of impact strength. (C) 2009 Elsevier B.V. All rights reserved.

Mechanical, thermal and morphological characterization of polypropylene/biodegradable polyester blends with additives

The (bio)degradation of polyolefins can be accelerated by modifying the level of crystallinity or by incorporation of carbonyl groups by adding pro-oxidants to masterbatches or through exposure to ultraviolet irradiation. In this work we sought to improve the degradation of PP by adding cobalt, calcium or magnesium stearate to Ecoflex(R), PP or Ecoflex(R)/PP blends. The effect of the pro-oxidants on biodegradability was assessed by examining the mechanical properties and fluidity of the polymers. PP had higher values for tensile strength at break and Young`s modulus than Ecoflex(R), and the latter had little influence on the properties of PP in Ecoflex(R)/PP blends. However, the presence of pro-oxidants (except for calcium) reduced these properties. All of the pro-oxidants enhanced the fluidity of PP, a phenomenon that facilitated polymer degradation at high temperatures. (C) 2009 Elsevier Ltd. All rights reserved.

Simulation of Sawmill Yard Operations Using Software Agents

Bergkvist insjön AB is a sawmill yard which is capable of producing 350,000 cubic meter of timber every year this requires lot of internal resources. Sawmill operations can be classified as unloading, sorting, storage and production of timber. In the company we have trucks arriving at random they have to be unloaded and sent back at the earliest to avoid queuing up of trucks creating a problem for truck owners. The sawmill yard has to operate with two log stackers that does several tasks including transporting the logs from trucks to measurement station where the logs will be sorted into classes and dropped into pockets from pockets to the sorted timber yard where they are stored and finally from there to sawmill for final processing. The main issue that needs to be answered here is the lining up trucks that are waiting to be unload, creating a problem for both sawmill as well as the truck owners and given huge production volume, it is certain that handling of resources is top priority. A key challenge in handling of resources would be unloading of trucks and finding a way to optimize internal resources.To address this problem i have experimented on different ways of using internal resources, i have designed different cases, in case 1 we have both the log stackers working on sawmill and measurement station. The main objective of having this case is to make sawmill and measurement station to work all the time. Then in case 2, i have divided the work between both the log stackers, one log stacker will be working on sawmill and pocket_control and second log stacker will be working on measurement station and truck. Then in case 3 we have only one log stacker working on all the agents, this case was designed to reduce cost of production, as the experiment cannot be done in real-time due to operational cost, for this purpose simulation is used, preliminary investigation into simulation results suggested that case 2 is the best option has it reduced waiting time of trucks considerably when compared with other cases and it showed 50% increase in optimizing internal resources.

Multi-agent simulation of sawmill yard operations

This paper reports the findings of using multi-agent based simulation model to evaluate the sawmill yard operations within a large privately owned sawmill in Sweden, Bergkvist Insjön AB in the current case. Conventional working routines within sawmill yard threaten the overall efficiency and thereby limit the profit margin of sawmill. Deploying dynamic work routines within the sawmill yard is not readily feasible in real time, so discrete event simulation model has been investigated to be able to report optimal work order depending on the situations. Preliminary investigations indicate that the results achieved by simulation model are promising. It is expected that the results achieved in the current case will support Bergkvist-Insjön AB in making optimal decisions by deploying efficient work order in sawmill yard.

Managing Dual Enrollment Programs: Review of Program Models, Operations, and Outcomes

Universities that offer dual enrollment programs for high school students must manage increasing student demand in the face of changing state legislation. This brief examines how institutions finance their dual enrollment programs, and how they ensure academic rigor as their programs continue to grow. The report also considers how dual enrollment programs ensure that students can transfer credits, and what strategies they use to encourage DE students to matriculate as undergraduates.

Developing a Credit for Prior Learning Program: System-Wide Strategies for Program Creation, Operations, and Recruitment

Credit for prior learning programs help students complete degrees more quickly and for less money. This report addresses the challenges of scaling up a credit for prior learning program at the university system level, and explores the delineation of responsibilities between system staff and institutional staff.

Operations strategy in perspective: the means for achieving superior performance

Manufacturing strategy has been widely studied and it is increasingly gaining attention. It has a fundamental role that is to translate the business strategy to the operations by developing the capabilities that are needed by the company in order to accomplish the desired performance. More precisely, manufacturing strategy comprises the decisions that managers take during a certain period of time in order to achieve a desire result. These decisions are related to which operational practices and resources are implemented. Our goal was to identify the relationship between these two decisions with operational performance. We based our arguments on the resource-based view for identifying sources of competitive advantage. Hence, we argued that operational practices and resources affect positively the operational performances. Additionally, we proposed that in the presence of some resources the implementation of operational practices would lead to a greater performance. We used previous scales for measuring operational practices and performance, and developed new constructs for resources. The data used is part of the High Performance Manufacturing project and the sample is composed by 291 plants. Through confirmatory factor analysis and multiple regressions we found that operational practices to a certain extant are positively related to operational performance. More specifically, the results show that JIT and customer orientation practices have a positive relationship with quality, delivery, flexibility, and cost performances. Moreover, we found that resources like technology and people explain a great variance of operational performance.

Arrecadação recorrente, ciclo econômico e on-off operations

Instituto Brasileiro de Economia

Cultural strategies: how do national cultures impact the operations strategy?

Through the assessment of the fourth round of the High Performance Manufacturing (HPM) project and the introduction of Hofstede’s Cultural Classification, the present work aims to deepen the comprehension of the impact of National Cultures on firms’ Operations Strategy. The ANOVA comparisons of four Operations Strategy elements in countries with different industrialization and development backgrounds (e.g. Germany, China, Brazil and South Korea) suggest that while Integrating Leadership and Implementation of Manufacturing Strategy are affected by the cultural levels of Power Distance, Individualism vs. Collectivism and Uncertainty Avoidance, the other two elements of Operations Strategy, Functional Integration and Formal Manufacturing Strategy, show effects of the degree of Individualism vs. Collectivism and Long-Term Orientation. The results of the study are expected to offer new perspectives on the planning and implementation of strategic and operations management for both practitioners and academics. More specifically, the analysis of cross-cultural influence over operations strategy may contribute to a better understanding of how cooperative behavior may lead firms to generate higher rents through the strengths and weaknesses of their relations, particularly in terms of global supply chains.

Structuring a startup's operations in an emerging market

The present work analyzes the establishment of a startup’s operations and the structuring all of the processes required to start up the business, launch the platform and keep it working. The thesis’ main focus can therefore be described as designing and structuring a startup’s operations in an emerging market before and during its global launch. Such business project aims to provide a successful case regarding the creation of a business and its launch into an emerging market, by illustrating a practical example on how to structure the business’ operations within a limited time frame. Moreover, this work will also perform a complete economic analysis of Brazil, thorough analyses of the industries the company is related to, as well as a competitive analysis of the market the venture operates in. Furthermore, an assessment of the venture’s business model and of its first six-month performance will also be included. The thesis’ ultimate goal lies in evaluating the company’s potential of success in the next few years, by highlighting its strengths and criticalities. On top of providing the company’s management with brilliant findings and forecasts about its own business, the present work will represent a reference and a practical roadmap for any entrepreneur willing to establish his operations in Brazil.