Phenolic matrices and sisal fibers modified with hydroxy terminated polybutadiene rubber: Impact strength, water absorption, and morphological aspects of thermosets and composites
Contribuinte(s) |
UNIVERSIDADE DE SÃO PAULO |
---|---|
Data(s) |
20/10/2012
20/10/2012
2010
|
Resumo |
The aim of the present work was to investigate the toughening of phenolic thermoset and its composites reinforced with sisal fibers, using hydroxyl-terminated polybutadiene rubber (HTPB) as both impact modifier and coupling agent. Substantial increase in the impact strength of the thermoset was achieved by the addition 10% of HTPB. Scanning electron microscopy (SEM) images of the material with 15% HTPB content revealed the formation of some rubber aggregates that reduced the efficiency of the toughening mechanism. In composites, the toughening effect was observed only when 2.5% of HTPB was added. The rubber aggregates were found located mainly at the matrix-fiber interface suggesting that HTPB could be used as coupling agent between the sisal fibers and the phenolic matrix. A composite reinforced with sisal fibers pre-impregnated with HTPB was then prepared; its SEM images showed the formation of a thin coating of HTPB on the surface of the fibers. The ability of HTBP as coupling agent between sisal fibers and phenolic matrix was then investigated by preparing a composite reinforced with sisal fibers pre-treated with HTPB. As revealed by its SEM images, the HTPB pre-treatment of the fibers resulted on the formation of a thin coating of HTPB on the surface of the fibers, which provided better compatibility between the fibers and the matrix at their interface, resulting in a material with low water absorption capacity and no loss of impact strength. (C) 2009 Elsevier B.V. All rights reserved. FAPESP (The State of Sao Paulo Research Foundation, Brazil) Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) CNPq (National Research Council, Brazil) |
Identificador |
INDUSTRIAL CROPS AND PRODUCTS, v.31, n.1, p.178-184, 2010 0926-6690 http://producao.usp.br/handle/BDPI/31699 10.1016/j.indcrop.2009.10.001 |
Idioma(s) |
eng |
Publicador |
ELSEVIER SCIENCE BV |
Relação |
Industrial Crops and Products |
Direitos |
closedAccess Copyright ELSEVIER SCIENCE BV |
Palavras-Chave | #Sisal fiber #Phenolic composites #Water absorption #Impact strength #Impact modifier #Hydroxyl-terminated polybutadiene rubber #SUGAR-CANE BAGASSE #MECHANICAL-PROPERTIES #POLYMERIC MATRICES #FURFURYL ALCOHOL #CURAUA FIBERS #RESIN #LIGNIN #REINFORCEMENT #Agricultural Engineering #Agronomy |
Tipo |
article original article publishedVersion |