Search for standard model production of four top quarks in the lepton plus jets channel in pp collisions at root S=8 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Thermal Imagery Applied to Reducing Bird Hazards to Aircraft at Airports

Airports worldwide are at a disadvantage when it comes to being able to spot birds and warn aircrews about the location of flocks either on the ground or close to the airfield. Birds simply cannot be easily seen during the day and are nearly invisible targets for planes at night or during low visibility. Thermal imaging (infrared) devices can be used to allow ground and tower personnel to pinpoint bird locations day or night, thus giving the airport operators the ability to launch countermeasures or simply warn the aircrews. This technology is available now, though it has been predominately isolated to medical and military system modifications. The cost of these devices has dropped significantly in recent years as technology, capability, and availability have continued to increase. Davison Army Airfield (DAAF), which is located about 20 miles south of Ronald Reagan National Airport in Washington, DC, is the transient home to many bird species including an abundance of ducks, seagulls, pigeons, and migrating Canadian geese. Over the past few years, DAAF implemented a variety of measures in an attempt to control the bird hazards on the airfield. Unfortunately, when it came to controlling these birds on or near our runways and aircraft movement areas we were more reactive than proactive. We would do airfield checks several times an hour to detect and deter any birds in these areas. The deterrents used included vehicle/human presence, pyrotechnics, and the periodic use of a trained border collie. At the time, we felt like we were doing all we could to reduce the threat to aircraft and human life. It was not until a near fatal accident in October 1998, when we truly realized how dangerous our operating environment really was to aircraft at or near the airfield. It was at this time, we had a C-12 (twin-engine passenger plane) land on our primary runway at night. The tower cleared the aircraft to land, and upon touchdown to the runway the aircraft collided with a flock of geese. Neither the tower nor the crew of the aircraft saw the geese because they were obscured in the darkness. The end result was 12 dead geese and $374,000 damage to the C-12. Fortunately, there were no human fatalities, but it was painfully clear we needed to improve our method of clearing the runway at night and during low visibility conditions. It was through this realization that we ventured to the U.S. Army Communications and Electronics Command for ideas on ways to deal with our threat. It was through a sub-organization within this command, Night Vision Labs, that we realized the possibilities of modifying thermal imagery and infrared technology to detecting wildlife on airports.

Rehabilitative management of swallowing and oral-motor movements in patients with tetanus of a public service in Brazil

When looking at developing countries, the prolonged intensive medical and nursing care required by many patients places extra demands on an already stretched healthcare budget. The purpose of this study was to verify the effectiveness of a systematic rehabilitative program for swallowing and oral-motor movements in intensive care unit patients with the diagnosis of tetanus. Forty-five patients who were clinically diagnosed with tetanus were included in the study. Participants were divided in two groups: Cl - consisted of 18 tetanus patients who were consecutively admitted to the infectious disease ICU from January 2002 to December 2005, prior to the existence of a systematic swallowing and oral-motor intervention: GII - consisted of 27 tetanus patients who were consecutively admitted to the infectious disease ICU from January 2006 to December 2009 and were submitted to a specific rehabilitative management of swallowing and of the oral-motor movements. Results indicate that the proposed rehabilitative program reduced by approximately 50% the time patients remained in the ICU. The significant improvement observed in patients with tetanus who were submitted to the rehabilitative program for swallowing and oral-motor movements occurred in conjunction with a reduction in the amount of time necessary to reintroduce oral feeding, to decannulate and to remove the feeding tubes. In conclusion, swallowing/muscle exercise, in patients with severe/very severe tetanus, seem to promote the remission of muscle tension and seem to maximize functional swallowing. (C) 2012 Elsevier B.V. All rights reserved.

COMPLEXITY MEASURE: A QUANTUM INFORMATION APPROACH

In the past decades, all of the efforts at quantifying systems complexity with a general tool has usually relied on using Shannon's classical information framework to address the disorder of the system through the Boltzmann-Gibbs-Shannon entropy, or one of its extensions. However, in recent years, there were some attempts to tackle the quantification of algorithmic complexities in quantum systems based on the Kolmogorov algorithmic complexity, obtaining some discrepant results against the classical approach. Therefore, an approach to the complexity measure is proposed here, using the quantum information formalism, taking advantage of the generality of the classical-based complexities, and being capable of expressing these systems' complexity on other framework than its algorithmic counterparts. To do so, the Shiner-Davison-Landsberg (SDL) complexity framework is considered jointly with linear entropy for the density operators representing the analyzed systems formalism along with the tangle for the entanglement measure. The proposed measure is then applied in a family of maximally entangled mixed state.

Deglutição e consistências alimentares pastosas e sólidas: revisão crítica de literatura

OBJETIVO: Levantar artigos científicos internacionais sobre a fisiologia da deglutição de alimentos nas consistências néctar, mel, pudim, pastosa heterogênea, semissólida e sólida, nas fases oral e faríngea. MÉTODOS: Trata-se de estudo de revisão qualitativa da literatura. Para a seleção dos artigos, foi utilizada a base de dados PubMed com emprego dos descritores "Swallowing and consistency", "Swallowing and solid" e "Swallowing and pasty", limitando-se a pesquisas publicadas no idioma inglês, entre os anos de 2005 e 2010, realizadas com seres humanos maiores de 18 anos. A metodologia empregada envolveu formulação da pergunta, localização e seleção dos estudos, e avaliação crítica dos artigos, conforme os preceitos do Cochrane Handbook. RESULTADOS: Foram identificados 211 estudos, dos quais 18 foram analisados, pois permitiam acesso ao texto completo e eram diretamente relacionados ao tema. CONCLUSÃO: Os estudos apresentam metodologia pouco uniforme, não havendo padronização, principalmente quanto aos métodos de avaliação. Em geral, as pesquisas foram realizadas com sujeitos saudáveis ou remeteram a um tipo de patologia, sem utilização de casos-controle. A heterogeneidade dos estudos possibilita que diferentes grupos de patologias sejam avaliados, porém, a variabilidade metodológica dificulta a definição e generalização dos padrões encontrados. Sendo assim, não é possível evidenciar dados que embasem a prática clínica fonoaudiológica no que diz respeito à fisiologia normal ou alterada da deglutição de diferentes consistências alimentares, tanto para sujeitos normais quanto para os acometidos por alguma desordem.

Alimentos na consistência líquida e deglutição: uma revisão crítica da literatura

O objetivo da presente revisão de literatura foi analisar artigos científicos internacionais publicados sobre a fisiologia da deglutição de alimentos líquidos nas fases oral e faríngea. A metodologia empregada envolveu a formulação da pergunta; localização e seleção dos estudos; avaliação crítica dos artigos; conforme os preceitos do Cochrane Handbook. Foram identificados 185 artigos, dos quais se excluiu 141 por não relacionarem-se diretamente ao tema e analisou-se 29 estudos. As pesquisas estão fortemente relacionadas às formas de identificação de disfagia e não as características proporcionadas pela deglutição de diferentes consistências. Quanto à metodologia empregada nos artigos analisados observa-se que na maioria dos estudos não há grupo-controle. Os grupos estudados são heterogêneos, principalmente quando considerando indivíduos com alterações neurológicas, além disso, não há pareamento de idade na maioria dos estudos. Dessa forma, os achados desta revisão demonstram que há dificuldade na aplicabilidade clínica dos achados científicos, dificultando a prática baseada evidências.

Fraca pressão aérea intraoral na fala após correção cirúrgica da fissura palatina

INTRODUÇÃO: Diversas alterações anatômicas e funcionais são observadas nos indivíduos portadores de fissuras labiopalatinas, dentre elas anormalidades estruturais da musculatura orofaríngea, que podem causar prejuízo da função velofaríngea e, consequentemente, de funções como sucção, deglutição e fala. O presente estudo teve por objetivo avaliar a presença de fraca pressão aérea intraoral na fala de indivíduos com fissura palatina submetidos a palatoplastia primária em tempo adequado e tardiamente, e comparar se o momento do procedimento cirúrgico pode acarretar maior ocorrência do distúrbio. A hipótese é de que os indivíduos submetidos a palatoplastia primária tardiamente apresentam maior ocorrência de fraca pressão aérea intraoral em comparação àqueles que realizaram a palatoplastia primária no momento adequado. MÉTODO: Participaram do estudo 37 indivíduos de ambos os sexos, com diagnóstico de fissura de palato associada ou não à fissura de lábio, divididos em dois grupos: 1) grupo precoce (GP), composto por 22 pacientes submetidos a palatoplastia primária até o 2º ano de vida; e 2) grupo tardio (GT), composto por 15 pacientes submetidos a palatoplastia primária tardiamente, após o período de aquisição dos sons da fala. Todos os participantes foram submetidos a rotina de avaliação fonoaudiológica com intervalo de, no mínimo, 3 meses de pós-operatório. Dentre os parâmetros avaliados encontra-se a análise da fraca pressão aérea intraoral, que foi a variável considerada para este estudo. RESULTADOS: A análise dos dados possibilitou observar maior frequência de fraca pressão aérea intraoral no GT (33%) em comparação ao GP (18%). Entretanto, tal diferença não foi estatisticamente significante (P = 0,44). CONCLUSÕES: A hipótese do estudo foi rejeitada. A presença de fraca pressão aérea intraoral foi observada na fala dos dois grupos estudados, não sendo a idade na ocasião da palatoplastia primária um fator determinante.

Caracterização eletromiográfica e ultrassonográfica da função mastigatória em indivíduos com oclusão normal

OBJETIVO: Caracterizar o controle motor dos músculos masseter e temporal e a morfologia do músculo masseter em atividades da função mastigatória em indivíduos com oclusão normal; verificar a compatibilidade entre os exames de eletromiografia de superfície (EMGs) e ultrassonografia (USG). MÉTODOS: Participaram 22 indivíduos adultos, de ambos os gêneros, sem alterações no sistema miofuncional orofacial. Os procedimentos adotados para avaliação dos participantes foram: EMGs dos músculos masseteres (MM) e temporais (MT); e USG dos MM, na realização de três tarefas - repouso muscular, apertamento dentário com algodão, apertamento dentário sem algodão. RESULTADOS: Para análise estatística dos dados foram utilizados os testes de Kolmogorv-Smirnov, teste-T pareado e Correlação de Spearman, com nível de significância de 5%. Na EMGs observou-se diferença entre a ativação de MM e MT no apertamento dentário com e sem algodão, sendo MT mais ativo que MM em ambas as tarefas. Não foram observadas diferenças entre as hemifaces, tanto na EMGs quanto na USG. Observou-se também correlação positiva entre os exames na condição de apertamento dentário sem algodão esquerdo e na condição de apertamento dentário esquerdo com algodão, e tendência à significância no apertamento dentário direito sem algodão. CONCLUSÃO: A associação da EMGs e USG na investigação da funcionalidade muscular traz importantes informações sobre fisiologia da musculatura esquelética. Os resultados do presente estudo indicam haver correlação entre a EMGs e a USG, ou seja, o aumento da atividade elétrica e o aumento correspondente da espessura do músculo.

Clinical prognostic indicators of dysphagia following prolonged orotracheal intubation in ICU patients

Introduction The development of postextubation wallowing dysfunction is well documented in the literature with high prevalence in most studies. However, there are relatively few studies with specific outcomes that focus on the follow-up of these patients until hospital discharge. The purpose of our study was to determine prognostic indicators of dysphagia in ICU patients submitted to prolonged orotracheal intubation (OTI). Methods We conducted a retrospective, observational cohort study from 2010 to 2012 of all patients over 18 years of age admitted to a university hospital ICU who were submitted to prolonged OTI and subsequently received a bedside swallow evaluation (BSE) by a speech pathologist. The prognostic factors analyzed included dysphagia severity rate at the initial swallowing assessment and at hospital discharge, age, time to initiate oral feeding, amount of individual treatment, number of orotracheal intubations, intubation time and length of hospital stay. Results After we excluded patients with neurologic diseases, tracheostomy, esophageal dysphagia and those who were submitted to surgical procedures involving the head and neck, our study sample size was 148 patients. The logistic regression model was used to examine the relationships between independent variables. In the univariate analyses, we found that statistically significant prognostic indicators of dysphagia included dysphagia severity rate at the initial swallowing assessment, time to initiate oral feeding and amount of individual treatment. In the multivariate analysis, we found that dysphagia severity rate at the initial swallowing assessment remained associated with good treatment outcomes. Conclusions Studies of prognostic indicators in different populations with dysphagia can contribute to the design of more effective procedures when evaluating, treating, and monitoring individuals with this type of disorder. Additionally, this study stresses the importance of the initial assessment ratings.

Profitable instructions (1963) : edición de texto y análisis de la expresión del punto de vista

[ES] Esta tesis presenta la edición crítica del libro Profitable instructions; describing what speciall obseruations are to be taken by trauellers in all nations, states and countries; pleasant and profitable. By the three much admired, Robert, late Earle of Essex. Sir Philip Sidney. And, Secretary Davison (1633). Dicho manual contiene tres partes diferenciadas como (a) el material prefatorio formado por una carta dirigida al lector, (b) el manual de instrucciones para el viajero, y (c) dos cartas dirigidas a viajeros noveles. Este libro ha sido objeto de estudio de algunos investigadores desde una perspectiva cultural y literaria, especialmente, la carta redactada por Sidney. Sin embargo, no parece haber sido editado anteriormente en su totalidad ni tampoco el texto ha sido objeto de análisis lingüístico y/o textual. Existe, no obstante, alguna edición de la carta de Robert Devereux al Conde de Rutland como la realizada por Spedding et al. (1862).

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Über die Linearität der Teichmüllerschen Modulgruppe des Torus mit zwei Punktierungen

Über die Liniarität der Teichmüllerschen Modulgruppe des Torus mit zwei Punktierungen. In meiner Arbeit beschäftige ich mich mit Darstellungen der Teichmüllerschen Modulgruppe des Torus mit zwei Punktierungen. Mein Ansatz hierbei ist, die Teichmüllersche Modulgruppe in eine p-adische Liegruppe einzubetten. Sei nun F die von zwei Elementen erzeugte freie Gruppe und Aut(F) die Automorphismengruppe von F. Inhalt des ersten Kapitels ist es nun zu zeigen, daß folgende Aussagen äquivalent sind: - Die Teichmüllersche Modulgruppe des Torus mit zwei Punktierungen ist linear, - Aut(F)ist linear, - F besitzt eine p-Kongruenzstruktur, deren Folgen- glieder von Aut(F) festgehalten werden, also charak- teristisch sind. Im zweiten Kapitel wird unter anderem gezeigt, daß es eine Einbettung einer Untergruppe endlichen Indexes der Aut(F) in die Automorphismengruppe einer einfachen p-adischen Liegruppe gibt. Bisher ist unbekannt, ob die Buraudarstellung treu ist.In dieser Arbeit wird ein unendliches, lineares Gleichungssystem, dessen Lösungen gerade die Koeffizienten der Wörter des Kernes der Buraudarstellung sind, vorgestellt.Im dritten Kapitel wird mit den Methoden des 1.Kapitels gezeigt, daß der Torus mit zwei Punktierungen genau dann linear ist, wenn die Teichmüllersche Modulgruppe der Sphäre mit 5 Punktierungen es auch ist. Bekanntlich ist die 4. Braidgruppe linear. Nun ist aber die 4. Braidgruppe letztlich die Teichmüllersche Modulgruppe der abgeschlossenen Kreisscheibe mit 5 Punktierungen. Wenn man nun deren Randpunkte miteinander identifiziert und anschließend wegläßt, erhält man die 5-fach punktiereSphäre.Mit der eben beschriebenen Abbildung kann man zeigen, daß die Teichmüllersche Modulgruppe der fünffach punktierten Sphäre linear ist.

O (alpha 4 s) loop-by-loop contributions to heavy quark pair production in hadronic collisions

The present state of the theoretical predictions for the hadronic heavy hadron production is not quite satisfactory. The full next-to-leading order (NLO) ${cal O} (alpha_s^3)$ corrections to the hadroproduction of heavy quarks have raised the leading order (LO) ${cal O} (alpha_s^2)$ estimates but the NLO predictions are still slightly below the experimental numbers. Moreover, the theoretical NLO predictions suffer from the usual large uncertainty resulting from the freedom in the choice of renormalization and factorization scales of perturbative QCD.In this light there are hopes that a next-to-next-to-leading order (NNLO) ${cal O} (alpha_s^4)$ calculation will bring theoretical predictions even closer to the experimental data. Also, the dependence on the factorization and renormalization scales of the physical process is expected to be greatly reduced at NNLO. This would reduce the theoretical uncertainty and therefore make the comparison between theory and experiment much more significant. In this thesis I have concentrated on that part of NNLO corrections for hadronic heavy quark production where one-loop integrals contribute in the form of a loop-by-loop product. In the first part of the thesis I use dimensional regularization to calculate the ${cal O}(ep^2)$ expansion of scalar one-loop one-, two-, three- and four-point integrals. The Laurent series of the scalar integrals is needed as an input for the calculation of the one-loop matrix elements for the loop-by-loop contributions. Since each factor of the loop-by-loop product has negative powers of the dimensional regularization parameter $ep$ up to ${cal O}(ep^{-2})$, the Laurent series of the scalar integrals has to be calculated up to ${cal O}(ep^2)$. The negative powers of $ep$ are a consequence of ultraviolet and infrared/collinear (or mass ) divergences. Among the scalar integrals the four-point integrals are the most complicated. The ${cal O}(ep^2)$ expansion of the three- and four-point integrals contains in general classical polylogarithms up to ${rm Li}_4$ and $L$-functions related to multiple polylogarithms of maximal weight and depth four. All results for the scalar integrals are also available in electronic form. In the second part of the thesis I discuss the properties of the classical polylogarithms. I present the algorithms which allow one to reduce the number of the polylogarithms in an expression. I derive identities for the $L$-functions which have been intensively used in order to reduce the length of the final results for the scalar integrals. I also discuss the properties of multiple polylogarithms. I derive identities to express the $L$-functions in terms of multiple polylogarithms. In the third part I investigate the numerical efficiency of the results for the scalar integrals. The dependence of the evaluation time on the relative error is discussed. In the forth part of the thesis I present the larger part of the ${cal O}(ep^2)$ results on one-loop matrix elements in heavy flavor hadroproduction containing the full spin information. The ${cal O}(ep^2)$ terms arise as a combination of the ${cal O}(ep^2)$ results for the scalar integrals, the spin algebra and the Passarino-Veltman decomposition. The one-loop matrix elements will be needed as input in the determination of the loop-by-loop part of NNLO for the hadronic heavy flavor production.

Heiltraditionen und Biodiversität: Die traditionelle Medizin der Baatombu Nordbenins

Im Zentrum der vorliegenden Untersuchung steht die Nutzung von Medizinalpflanzen vor dem Hintergrund einer zurückgehenden Phytodiversität in Nordbenin. Die Dissertation ba-siert auf ethnologischen Forschungen, die in das interdisziplinäre Forschungsprojekt BIOTA (Biodiversity Monitoring Transect Analysis in Africa) eingebunden sind. Das BIOTA-Projekt untersucht die Wirkung menschlichen Handelns (insbesondere Nutzung) auf die Biodiversi-tät und versucht aus diesen Erkenntnissen Maßnahmen zum Erhalt der biologischen Vielfalt abzuleiten. Die vorliegende Studie basiert auf einem 13-monatigen Feldforschungsaufenthalt im Zeitraum von April 2004 bis August 2006 in der nordbeninischen Gemeinde Ouassa-Pehunco. Meine Informanten sind überwiegend traditionelle Heiler, mit denen ich standardi-sierte und offene Interviews durchführte, deren Behandlungsverfahren und Heilzeremonien ich teilnehmend beobachtete sowie dokumentierte und auf deren Initiative hin ich mich bei dem Aufbau eines Medizinalpflanzengartens einbrachte (cf. Kap. 1). In diesem Forschungsfeld situiere ich mich mit der Frage nach dem Einfluss einer verän-derten Pflanzenvielfalt auf die traditionelle medizinische Versorgung der Baatombu Nordbe-nins. Die Beantwortung dieser Frage erfolgt in mehreren Schritten. 1. Die Phytodiversität nimmt, wie von naturwissenschaftlicher Seite bestätigt, in der Region ab. 2. Lokale Heilkun-dige nehmen diesen Rückgang an verfügbaren Heilpflanzen ebenso wahr. 3. Die Abnahme der Pflanzenbestände führen die Heiler vor allem auf den Baumwollanbau und die demogra-fischen Entwicklungen der Region zurück - dies entspricht ebenfalls den Auffassungen von Naturwissenschaftlern, die eine Verdichtung der landwirtschaftlichen Bodennutzung fest-stellten. 4. Heilkundige und Heilpflanzenverkäuferinnen vermerken eine zunehmende Nach-frage nach lokaler Pflanzenmedizin aufgrund der steigenden Bevölkerungszahlen. 5. Die pflanzenbasierte Gesundheitsversorgung der lokalen Bevölkerung ist jedoch relativ gesi-chert, da die Heiler sich alternativ wirkender Medizinalpflanzen bedienen, ihre Therapiefor-men der veränderten Lage anpassen (z.B. geringere Dosierungen) und sie regelmäßig genutz-te Pflanzen im Medizinalpflanzengarten Guson wieder anpflanzen. Ein wichtiger Aspekt der Arbeit ist, dass die Heilpraktiken der Baatombu nicht allein auf naturheilkundlichem Erfahrungswissen beruhen, sondern in magisch-religiöse Vorstellungen eingebettet sind (cf. Kap. 2). Demzufolge untersuche ich die lokalen Krankheits- und Ge-sundheitsvorstellungen und die symbolischen Klassifikationen von Heilpflanzen und Krank-heiten (cf. Kap. 3). Ich stellte fest, dass nach Auffassung von Heilkundigen soziokulturelle Faktoren wie der Zeitpunkt und der Ort einer Sammlung sowie entsprechende Ernte-Rituale die medizinische Wirksamkeit von Pflanzen maßgeblich bedingen (cf. Kap. 5). Die Umwelt-klassifikation der Heiler (Landschafts- und Vegetationstypen) richtet sich demzufolge nach dem medizinischen Wert, den sie einer Heilpflanze zuschreiben (cf. Kap.4). Basierend auf diesen Erkenntnissen wurde von einigen engagierten Heilern und mit Un-terstützung von BIOTA, der GTZ und der Deutschen Botschaft der Medizinalpflanzengarten Guson eingerichtet, der eine Antwort auf die regionale Ressourcenverknappung darstellt und in seiner Anlage dem lokalen ökologischen und heilkundlichen Wissen der Heiler entspricht (cf. Kap. 6). Den Anwendungsbezug der Forschung nutzten die Heiler, um sich als Interes-sensgemeinschaft für den Erhalt der benötigten pflanzlichen Ressourcen einzusetzen.

Nanoscopic studies of conjugated polymer blends by (electric) scanning probe microscopy

Conjugated polymers and conjugated polymer blends have attracted great interest due to their potential applications in biosensors and organic electronics. The sub-100 nm morphology of these materials is known to heavily influence their electromechanical properties and the performance of devices they are part of. Electromechanical properties include charge injection, transport, recombination, and trapping, the phase behavior and the mechanical robustness of polymers and blends. Electrical scanning probe microscopy techniques are ideal tools to measure simultaneously electric (conductivity and surface potential) and dielectric (dielectric constant) properties, surface morphology, and mechanical properties of thin films of conjugated polymers and their blends.rnIn this thesis, I first present a combined topography, Kelvin probe force microscopy (KPFM), and scanning conductive torsion mode microscopy (SCTMM) study on a gold/polystyrene model system. This system is a mimic for conjugated polymer blends where conductive domains (gold nanoparticles) are embedded in a non-conductive matrix (polystyrene film), like for polypyrrole:polystyrene sulfonate (PPy:PSS), and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). I controlled the nanoscale morphology of the model by varying the distribution of gold nanoparticles in the polystyrene films. I studied the influence of different morphologies on the surface potential measured by KPFM and on the conductivity measured by SCTMM. By the knowledge I gained from analyzing the data of the model system I was able to predict the nanostructure of a homemade PPy:PSS blend.rnThe morphologic, electric, and dielectric properties of water based conjugated polymer blends, e.g. PPy:PSS or PEDOT:PSS, are known to be influenced by their water content. These properties also influence the macroscopic performance when the polymer blends are employed in a device. In the second part I therefore present an in situ humidity-dependence study on PPy:PSS films spin-coated and drop-coated on hydrophobic highly ordered pyrolytic graphite substrates by KPFM. I additionally used a particular KPFM mode that detects the second harmonic electrostatic force. With this, I obtained images of dielectric constants of samples. Upon increasing relative humidity, the surface morphology and composition of the films changed. I also observed that relative humidity affected thermally unannealed and annealed PPy:PSS films differently. rnThe conductivity of a conjugated polymer may change once it is embedded in a non-conductive matrix, like for PPy embedded in PSS. To measure the conductivity of single conjugated polymer particles, in the third part, I present a direct method based on microscopic four-point probes. I started with metal core-shell and metal bulk particles as models, and measured their conductivities. The study could be extended to measure conductivity of single PPy particles (core-shell and bulk) with a diameter of a few micrometers.