Industrial scale microwave processing of tomato juice using a novel continuous microwave system

This study evaluated the effect of an industrial scale continuous flow microwave volumetric heating system in comparison to conventional commercial scale pasteurisation for the processing of tomato juice in terms of physicochemical properties, microbial characteristics and antioxidant capacity. The effect against oxidative stress in Caco-2 cells, after in vitro digestion was also investigated. Physicochemical and colour characteristics of juices were very similar between technologies and during storage. Both conventional and microwave pasteurisation inactivated microorganisms and kept them in low levels throughout storage. ABTS⁺ values, but not ORAC, were higher for the microwave pasteurised juice at day 0 however no significant differences between juices were observed during storage. Juice processed with the microwave system showed an increased cytoprotective effect against H₂O₂ induced oxidation in Caco-2 cells. Organoleptic analysis revealed that the two tomato juices were very similar. The continuous microwave volumetric heating system appears to be a viable alternative to conventional pasteurisation.

A high-value, low-cost bubble continuous positive airway pressure system for low-resource settings:technical assessment and initial case reports

Acute respiratory infections are the leading cause of global child mortality. In the developing world, nasal oxygen therapy is often the only treatment option for babies who are suffering from respiratory distress. Without the added pressure of bubble Continuous Positive Airway Pressure (bCPAP) which helps maintain alveoli open, babies struggle to breathe and can suffer serious complications, and frequently death. A stand-alone bCPAP device can cost $6,000, too expensive for most developing world hospitals. Here, we describe the design and technical evaluation of a new, rugged bCPAP system that can be made in small volume for a cost-of-goods of approximately $350. Moreover, because of its simple design--consumer-grade pumps, medical tubing, and regulators--it requires only the simple replacement of a <$1 diaphragm approximately every 2 years for maintenance. The low-cost bCPAP device delivers pressure and flow equivalent to those of a reference bCPAP system used in the developed world. We describe the initial clinical cases of a child with bronchiolitis and a neonate with respiratory distress who were treated successfully with the new bCPAP device.

Promover a qualidade de cuidados de enfermagem a idosos dependentes

A investigação tem demonstrado que os enfermeiros tendem a interagir menos e a centrarem-se mais em cuidados físicos na prestação de cuidados a idosos dependentes, confusos e/ou desorientados. Contudo a literatura em enfermagem demonstra que a interacção social com pacientes dependentes é importante, pois permite melhoria da sua situação clínica e melhor reintegração. Este estudo exploratório procura contribuir para compreender melhor como se pode promover a qualidade dos cuidados de enfermagem a idosos dependentes em três contextos: hospital, cuidados continuados e em centro de saúde (domiciliares). Procura-se contribuir para a sensibilização e formação de enfermeiros na prestação de cuidados de qualidade a idosos dependentes e melhor definir cuidados relacionais a estas pessoas. Especificamente este estudo procura: i) identificar os cuidados de enfermagem a prestar aos pacientes idosos dependentes; ii) aprofundar o conhecimento sobre as dificuldades/obstáculos (emocionais, institucionais, relacionais, …) dos enfermeiros na promoção de uma relação de cuidados mais expressivos a idosos dependentes; iii) identificar factores que facilitam e dificultam a prestação de cuidados mais relacionais; iv) identificar modos de fomentar, sensibilizar e motivar os enfermeiros para a prestação de cuidados a pessoas idosas dependentes. A metodologia adoptada neste estudo é o PhotoVoice, aplicado a 3 grupos de enfermeiros que prestam cuidados a idosos dependentes em 3 contextos: hospital; comunidade (centro de saúde); cuidados continuados. Assim, abrangem-se os três principais contextos em que o idoso dependente pode estar inserido e o enfermeiro presta cuidados. A amostra envolve 12 enfermeiros (3 de contexto hospitalar, 3 de cuidados continuados e 6 de centro de saúde), com idades entre os 22 e 43 anos, 10 do sexo feminino. Os principais resultados sugerem que a promoção dos cuidados de enfermagem a pessoas idosas dependentes envolve: i) trabalho e decisão em equipa multidisciplinar; ii) mais recursos materiais e humanos; iii) melhores condições físicas e formação adequada. Paralelamente, o principal obstáculo à prestação de cuidados de enfermagem de qualidade nos três contextos centra-se na escassez de recursos e na desorganização, que se traduzem em falta de tempo, desordem e frustração. Além disso, os participantes salientam a importância do envolvimento da família, considerada parte da unidade de cuidado.

The effect of clock jitter on the performance of continuous-time delta-sigma ADC for GNSS signals

Next generation Global Navigation Satellite System (GNSS) receivers will operate in multiple navigation bands. An efficient way to achieve this with lower power and cost is to employ BandPass Sampling (BPS); nevertheless, the sampling operation injects large amounts of jitter noise, which degrades the performance of the receiver. Continuous–Time (CT) Delta–Sigma (ΔΣ) modulators are capable of suppressing this noise but the impact of clock jitter at the output of the Digital– to–Analog Converter (DAC) in the feedback path of the modulator should be taken into account. This paper presents an analytical approach for describing clock jitter in GNSS receivers when a CT–ΔΣ modulator is utilized for Analog–to–Digital Conversion (ADC). The validity of the presented approach is verified through time–domain simulations using a behavioural model of the fourth–order CT–ΔΣ modulator with 1–bit NRZ DAC feedback pulse.

Forecasting overseas visitors into the United Kingdom using continuous time and autoregressive fractional integrated moving average models with discrete data

This paper applies Gaussian estimation methods to continuous time models for modelling overseas visitors into the UK. The use of continuous time modelling is widely used in economics and finance but not in tourism forecasting. Using monthly data for 1986–2010, various continuous time models are estimated and compared to autoregressive integrated moving average (ARIMA) and autoregressive fractionally integrated moving average (ARFIMA) models. Dynamic forecasts are obtained over different periods. The empirical results show that the ARIMA model performs very well, but that the constant elasticity of variance (CEV) continuous time model has the lowest root mean squared error (RMSE) over a short period.

An FPGA based decimation filter processor design for real-time continuous-time Σ−Δ modulator performance measurement and evaluation

This paper reports on a Field Programmable Gate Array (FPGA) implementation as well as prototyping for real-time testing of a low complexity high efficiency decimation filter processor which is deployed in conjunction with a custom built low-power jitter insensitive Continuous Time (CT) Sigma-Delta (Σ-Δ) Modulator to measure and assess its performance. The CT Σ-Δ modulator/decimation filter cascade can be used in integrated all-digital microphone interfaces for a variety of applications including mobile phone handsets, wireless handsets as well as other applications requiring all-digital microphones. The work reported here concentrates on the design and implementation as well as prototyping on a Xilinx Spartan 3 FPGA development system and real-time testing of the decimation processing part deploying All-Pass based structures to process the bit stream coming from CT Σ-Δ modulator hence measuring in real-time and fully assessing the modulator's performance.

Application of continuous wavelet transform to the analysis of the modulus of the fractional Fourier transform bands for resolving two component mixture

In this paper, the fractional Fourier transform (FrFT) is applied to the spectral bands of two component mixture containing oxfendazole and oxyclozanide to provide the multicomponent quantitative prediction of the related substances. With this aim in mind, the modulus of FrFT spectral bands are processed by the continuous Mexican Hat family of wavelets, being denoted by MEXH-CWT-MOFrFT. Four modulus sets are obtained for the parameter a of the FrFT going from 0.6 up to 0.9 in order to compare their effects upon the spectral and quantitative resolutions. Four linear regression plots for each substance were obtained by measuring the MEXH-CWT-MOFrFT amplitudes in the application of the MEXH family to the modulus of the FrFT. This new combined powerful tool is validated by analyzing the artificial samples of the related drugs, and it is applied to the quality control of the commercial veterinary samples.

Domestic Consumption Simulation and Management Using a Continuous Consumption Management and Optimization Algorithm

The recent changes concerning the consumers’ active participation in the efficient management of load devices for one’s own interest and for the interest of the network operator, namely in the context of demand response, leads to the need for improved algorithms and tools. A continuous consumption optimization algorithm has been improved in order to better manage the shifted demand. It has been done in a simulation and user-interaction tool capable of being integrated in a multi-agent smart grid simulator already developed, and also capable of integrating several optimization algorithms to manage real and simulated loads. The case study of this paper enhances the advantages of the proposed algorithm and the benefits of using the developed simulation and user interaction tool.

Application of Continuous Wavelet Transform to the Analysis of the Modulus of the Fractional Fourier Transform Bands for Resolving Two Component Mixture

In this paper, the fractional Fourier transform (FrFT) is applied to the spectral bands of two component mixture containing oxfendazole and oxyclozanide to provide the multicomponent quantitative prediction of the related substances. With this aim in mind, the modulus of FrFT spectral bands are processed by the continuous Mexican Hat family of wavelets, being denoted by MEXH-CWT-MOFrFT. Four modulus sets are obtained for the parameter a of the FrFT going from 0.6 up to 0.9 in order to compare their effects upon the spectral and quantitative resolutions. Four linear regression plots for each substance were obtained by measuring the MEXH-CWT-MOFrFT amplitudes in the application of the MEXH family to the modulus of the FrFT. This new combined powerful tool is validated by analyzing the artificial samples of the related drugs, and it is applied to the quality control of the commercial veterinary samples.

Análise do processo de desenvolvimento de novos produtos na indústria

No âmbito da unidade curricular Dissertação/Projeto do 2º ano do Mestrado em Engenharia mecânica – Ramo Gestão Industrial do Instituto Superior de Engenharia do Porto, o presente trabalho enquadra-se na análise do processo de desenvolvimento de novos produtos na indústria, como suporte à gestão de projetos. No seguimento da necessidade que as empresas têm cada vez mais presente em investirem na melhoria do processo de desenvolvimento de novos produtos, isso conduz a uma garantia de cumprimento de prazos e qualidade, à redução de custos, aumento de vendas, aumento de receitas, satisfação de clientes, entre outros benefícios. O trabalho foi desenvolvido, na empresa Doureca Produtos Plásticos, Lda, no Departamento de Engenharia. À medida que o projeto de melhoria avançou, foi cativante observar como os resultados obtidos contribuíam para a alteração dos paradigmas de trabalho da empresa e o impacto na melhoria continua, em função do caminho traçado da busca da máxima eficiência e eficácia. As ferramentas de melhoria são o suporte ideal, que ajudam a atingir a meta da sustentabilidade dos negócios, mas o maior obstáculo, continua a ser o fator humano. A implementação destes sistemas de melhoria requer uma maior abertura para a utilização das respetivas ferramentas, e uma mobilização dos diferentes intervenientes com vista à obtenção de resultados. Após uma avaliação da situação inicial, foram identificados pontos a melhorar na organização, de seguida foi definida a visão do que deveria ser implementado tendo em conta a estratégia da empresa, e posteriormente executado um plano de implementação das melhorias. No decurso do trabalho foram implementadas novas ferramentas de auxílio para o desenvolvimento de novos produtos como suporte à gestão de projetos. Estas ferramentas são apoiadas na filosofia LEAN, de forma a eliminar desperdícios e criar valor através da melhor utilização dos recursos.

Continuous improvement logidtics project: A study on the increase of the finished goods warehouse of Unilever at Sta. Iria

This project is called Improvement Logistics Project and aims to study an opportunity of expansion of the output in 80% of the Unilever warehouse at Sta. Iria via an increase in exportations for the next two years. This has been done using the Distibuidora Luís Simões tariff rates as basis of comparison for the as-is and to-be situations. For this matter, an allocation of all the costs of the warehouse is prepared and described with the goal of comparing the differences with and without expansion. The results show that a better outcome is achieved with the investment, but the warehouse is yet to prove its efficiency against the distribution company.

Long-term outcome after cognitive and behavioral regression in nonlesional epilepsy with continuous spike-waves during slow-wave sleep.

PURPOSE: To present the long-term follow-up of 10 adolescents and young adults with documented cognitive and behavioral regression as children due to nonlesional focal, mainly frontal, epilepsy with continuous spike-waves during slow wave sleep (CSWS). METHODS: Past medical and electroencephalography (EEG) data were reviewed and neuropsychological tests exploring main cognitive functions were administered. KEY FINDINGS: After a mean duration of follow-up of 15.6 years (range, 8-23 years), none of the 10 patients had recovered fully, but four regained borderline to normal intelligence and were almost independent. Patients with prolonged global intellectual regression had the worst outcome, whereas those with more specific and short-lived deficits recovered best. The marked behavioral disorders resolved in all but one patient. Executive functions were neither severely nor homogenously affected. Three patients with a frontal syndrome during the active phase (AP) disclosed only mild residual executive and social cognition deficits. The main cognitive gains occurred shortly after the AP, but qualitative improvements continued to occur. Long-term outcome correlated best with duration of CSWS. SIGNIFICANCE: Our findings emphasize that cognitive recovery after cessation of CSWS depends on the severity and duration of the initial regression. None of our patients had major executive and social cognition deficits with preserved intelligence, as reported in adults with early destructive lesions of the frontal lobes. Early recognition of epilepsy with CSWS and rapid introduction of effective therapy are crucial for a best possible outcome.