Aprendizagem matemática no ensino superior: a influência da plataforma M@T-educar com sucesso

Novas abordagens educacionais têm vindo a surgir como resultado de mudanças económicas, sociais e políticas, que levaram, a nível europeu ao desenvolvimento do Processo de Bolonha. As instituições de ensino superior enfrentam, assim, novos desafios e oportunidades, nomeadamente, o desenvolvimento de contextos educativos mais centrados nas aprendizagens dos alunos, promotores de cidadãos mais autónomos, mais ativos e mais provocadores, capazes de responderem às exigências da Sociedade do Conhecimento global. Diversos estudos apontam a importância de ambientes online na persecução desses objetivos, designadamente na área da Matemática. Neste contexto, desenvolveu-se a plataforma online – M@t-educar com Sucesso – que, a partir da informação teórica, permite a resolução de tarefas interativas, algumas delas contendo animações, das quais se fornece um feedback imediato, a qual carece de avaliação. Assim, este estudo tem como objetivo principal avaliar a influência da exploração prévia às aulas da referida plataforma no desenvolvimento de conhecimentos e capacidades matemáticas, da autonomia e do interesse por essa área em estudantes do ensino superior. O estudo ocorreu na unidade curricular de Cálculo Infinitesimal do Curso Superior de Gestão de uma instituição do ensino superior. Metodologicamente, optou-se por uma abordagem mista de investigação e pelo design de estudo de caso, tendo-se partido de uma análise macro, envolvendo todos os alunos de Cálculo Infinitesimal, seguida de uma análise meso, considerando os alunos da turma da professora/investigadora, que foi evoluindo para uma análise micro, estudando cinco casos da turma. Para tal, utilizaram-se diversas técnicas de recolha de dados – inquirição, observação e análise documental, suportadas por variados instrumentos. A análise estatística e de conteúdo a que os dados foram submetidos permite concluir que a exploração prévia dos conteúdos através desta plataforma contribui para o desenvolvimento, principalmente, de autonomia e da capacidade de aplicação de conhecimento produzido à resolução de tarefas de diversa natureza.

Determinação e aplicações dos frutooligossacarídeos de Yacon (Smallanthus sonchifolius)

Torna-se cada vez mais importante fortalecer o vínculo entre o setor agrário, as universidades e o setor industrial. Através de estudos científicos pode-se aprimorar a produção agrícola, valorizar comercialmente os produtos manufaturados e permitir usos biotecnológicos anteriormente indisponíveis. Este trabalho ambicionou gerar dados que incentivassem e permitissem o suporte técnico-científico adequado ao pequeno e médio agricultor do litoral da Grande-Florianópolis, no estado de Santa Catarina (Brasil) viabilizando a exploração comercial das raízes de yacon (Smallanthus sonchifolius). Primeiro, o enfoque agronómico que objetivou ofertar dados científicos da adequação climática do plantio de yacon na região do litoral de Florianópolis (SC) com a finalidade de otimizar a produção e rentabilizá-la. Por cromatografia líquida de alta eficiência foram quantificados os valores de frutooligossacarídeos (fração de interesse, alimento funcional com efeito prebiótico), frutose, glucose e sacarose e avaliaram-se os efeitos diretos dos fatores climáticos na produção fazendo uso da análise multivariada para sua interpretação. Os resultados mostram que a produção de FOS não consegue atingir valores similares aos de outras regiões onde o yacon é explorado economicamente. Igualmente a produção de FOS parece ter uma grande dependência do clima, especialmente da amplitude térmica e da chuva. O segundo enfoque foi a possibilidade de exploração comercial, através de secagem em estufa. O processo de secagem, especialmente em amostras produzidas em condições climatológicas mais drásticas induzem modificações provocadas pela reacção de Maillard, como foi verificado por estudos de GCxGC-Tof-Ms e ESI-MS. O terceiro enfoque foi biotecnológico e consistiu em aproveitar frutooligossacarídeos comerciais para utilizá-los como matriz polimérica para produção de estruturas em escala nano e micrométrica através da eletropulverização. Foram observadas, nesta etapa, os aspetos morfológicos e as características das partículas formadas e a sua capacidade de servir como veículo transportador de compostos com características anti-oxidantes.

Exploração matemática de módulos interativos de ciências: um estudo de caso no "Jardim da Ciência" em articulação com a sala de aula com alunos do 1º ciclo do ensino básico

Orientações curriculares portuguesas para o 1.º Ciclo do Ensino Básico [CEB] preconizam o desenvolvimento de capacidades transversais como a resolução de problemas [RP] e a comunicação (em) matemática [CM], o estabelecimento de conexões Matemática–Ciências Físicas e Naturais [CFN] e a articulação de contextos de educação formal [EF] e de educação não formal [ENF]. Em Portugal, professores manifestam querer utilizar recursos didáticos com estes atributos. Contudo, tais recursos escasseiam, assim como investigação que se situa na confluência destas dimensões. Por conseguinte, na presente investigação, foram desenvolvidos recursos didáticos centrados na promoção de conexões Matemática-Ciências Físicas e Naturais e na articulação de contextos de EF e de ENF. Assim, a presente investigação tem por finalidade desenvolver (conceber, produzir, implementar e avaliar) recursos didáticos de exploração matemática de módulos interativos de ciências, articulando contextos de EF e ENF que, nomeadamente, apelem e possam desenvolver capacidades básicas ligadas à RP e à CM de alunos do 1.º CEB. Decorrente desta finalidade, definiram-se as seguintes questões de investigação: 1. Quais as repercussões dos recursos didáticos desenvolvidos na capacidade de RP de alunos do 4.º ano do 1.º CEB?; 2. Quais as repercussões dos recursos didáticos desenvolvidos na capacidade de CM de alunos do 4.º ano do 1.º CEB?. Além disso, procurou-se auscultar a opinião de alunos e professora sobre a exploração dos recursos didáticos desenvolvidos, principalmente, ao nível de conexões Matemática–CFN e articulação de contextos de EF e ENF de Ciências. Para tanto, foi realizado um estudo de caso com uma professora e seus alunos do 4.º ano do 1.º CEB, em sala de aula e num espaço de ENF de Ciências. A recolha de dados envolveu diversas técnicas e vários instrumentos. A técnica de análise documental incidiu nas produções dos alunos registadas em Guiões do Aluno e em Tarefas-Teste. No âmbito da técnica de inquirição foram administrados questionários a todos os alunos da turma – o Questionário Inicial e o Questionário Final – e entrevistas semiestruturadas à professora – a Entrevista Inicial à Professora e a Entrevista Final à Professora – e aos três alunos caso – Entrevista ao aluno caso. No que respeita à técnica de observação foi implementado o instrumento Notas de campo, onde foram efetuados registos de natureza descritiva e reflexiva. Os dados recolhidos foram objeto de análise de conteúdo e de análise estatística. Resultados da investigação apontam para que a exploração dos recursos didáticos desenvolvidos possa ter promovido o desenvolvimento de capacidades matemáticas de RP e, sobretudo, de CM dos alunos. Parecem ainda indicar que, genericamente, os alunos e a professora possam ter considerado que os recursos didáticos promoveram conexões Matemática– CFN e a articulação entre espaços de EF e ENF de Ciências.

In search of reliable centimeter-level indoor positioning: a smartphone-based approach

This thesis describes the design and implementation of a reliable centimeter-level indoor positioning system fully compatible with a conventional smartphone. The proposed system takes advantage of the smartphone audio I/O and processing capabilities to perform acoustic ranging in the audio band using non-invasive audio signals and it has been developed having in mind applications that require high accuracy, such as augmented reality, virtual reality, gaming and audio guides. The system works in a distributed operation mode, i.e. each smartphone is able to obtain its own position using only acoustic signals. To support the positioning system, a Wireless Sensor Network (WSN) of synchronized acoustic beacons is used. To keep the infrastructure in sync we have developed an Automatic Time Synchronization and Syntonization (ATSS) protocol with a standard deviation of the sync offset error below 1.25 μs. Using an improved Time Difference of Arrival (TDoA) estimation approach (which takes advantage of the beacon signals’ periodicity) and by performing Non-Line-of-Sight (NLoS) mitigation, we were able to obtain very stable and accurate position estimates with an absolute mean error of less than 10 cm in 95% of the cases and a mean standard deviation of 2.2 cm for a position refresh period of 350 ms.

Avaliação da vulnerabilidade sísmica de edifícios escolares

A grande motivação para este trabalho resultou na avaliação da vulnerabilidade sísmica das escolas básicas e secundárias que fazem parte integrante do parque escolar de Portugal Continental. Apesar de até ao momento apenas se terem estudado a vulnerabilidade de algumas escolas em algumas zonas particulares do nosso país, para este trabalho de investigação tivemos uma ambição muito maior e obviamente fizemos um esforço muito maior. Estabelecemos assim como meta, a avaliação de todo o parque escolar. Embora todo o parque escolar possua na ordem das três centenas de escolas em todo o território nacional e sendo este projeto de reabilitação, um projeto com a duração de 2007 a 2015. Em 2011, por motivos da crise económica, todo o projeto congelou sendo reabilitadas até à data cerca de apenas um terço das escolas. Esta quantidade foi o número de escolas que avaliamos em todo o país. As escolas, sendo edifícios públicos com uma importância fundamental, tanto pela elevada concentração de jovens, como pela função essencial como centros de aprendizagem para as gerações vindouras, como também pela ameaça que representam na eventualidade dum cenário sísmico pela enorme densidade de utilizadores, e pela vantagem de nesse cenário de catástrofe a importância estrutural ser superior em relação à maior parte dos edifícios correntes, devidamente demonstrado pelos argumentos enumerados, consequentemente as escolas podem servir como instalações de proteção civil perante uma catástrofe sísmica para apoio das populações circundantes afetadas. Portanto para cada uma das escolas cordialmente fornecidas pelo Parque Escolar, E.P.E., foi feito um estudo exaustivo e muito individual de cada uma das escolas, onde cada análise foi desenvolvida por uma metodologia simplificada, sendo cada análise sempre individual, e nunca tendo sida aplicada em série, este fator melhora substancialmente a eficácia da avaliação para a quantificação das vulnerabilidades e da determinação do grau de dano e das frações de perda para os requisitos fundamentais de limitação de danos, de não colapso, e de colapso iminente que correspondem a ações com períodos de retorno de 95, 475 e 975 anos. Este trabalho é fundamental para as entidades competentes terem a consciência da vulnerabilidade das escolas secundárias, para puderem atuar a nível estrutural e diminuir assim a vulnerabilidade sísmica, e mesmo que por impossibilidade económica o poder governamental não intervenha, então pode e principalmente deve, elaborar planos de emergência tanto com engenheiros civis qualificados como com a total colaboração das corporações de bombeiros que fazem parte das forças de operação e socorro da Autoridade Nacional de Proteção Civil (ANPC).

Electromechanical properties of engineered lead free potassium sodium niobate based materials

K0.5Na0.5NbO3 (KNN), is the most promising lead free material for substituting lead zirconate titanate (PZT) which is still the market leader used for sensors and actuators. To make KNN a real competitor, it is necessary to understand and to improve its properties. This goal is pursued in the present work via different approaches aiming to study KNN intrinsic properties and then to identify appropriate strategies like doping and texturing for designing better KNN materials for an intended application. Hence, polycrystalline KNN ceramics (undoped, non-stoichiometric; NST and doped), high-quality KNN single crystals and textured KNN based ceramics were successfully synthesized and characterized in this work. Polycrystalline undoped, non-stoichiometric (NST) and Mn doped KNN ceramics were prepared by conventional ceramic processing. Structure, microstructure and electrical properties were measured. It was observed that the window for mono-phasic compositions was very narrow for both NST ceramics and Mn doped ceramics. For NST ceramics the variation of A/B ratio influenced the polarization (P-E) hysteresis loop and better piezoelectric and dielectric responses could be found for small stoichiometry deviations (A/B = 0.97). Regarding Mn doping, as compared to undoped KNN which showed leaky polarization (P-E) hysteresis loops, B-site Mn doped ceramics showed a well saturated, less-leaky hysteresis loop and a significant properties improvement. Impedance spectroscopy was used to assess the role of Mn and a relation between charge transport – defects and ferroelectric response in K0.5Na0.5NbO3 (KNN) and Mn doped KNN ceramics could be established. At room temperature the conduction in KNN which is associated with holes transport is suppressed by Mn doping. Hence Mn addition increases the resistivity of the ceramic, which proved to be very helpful for improving the saturation of the P-E loop. At high temperatures the conduction is dominated by the motion of ionized oxygen vacancies whose concentration increases with Mn doping. Single crystals of potassium sodium niobate (KNN) were grown by a modified high temperature flux method. A boron-modified flux was used to obtain the crystals at a relatively low temperature. XRD, EDS and ICP analysis proved the chemical and crystallographic quality of the crystals. The grown KNN crystals exhibit higher dielectric permittivity (29,100) at the tetragonal-to-cubic phase transition temperature, higher remnant polarization (19.4 μC/cm2) and piezoelectric coefficient (160 pC/N) when compared with the standard KNN ceramics. KNN single crystals domain structure was characterized for the first time by piezoforce response microscopy. It could be observed that <001> - oriented potassium sodium niobate (KNN) single crystals reveal a long range ordered domain pattern of parallel 180° domains with zig-zag 90° domains. From the comparison of KNN Single crystals to ceramics, It is argued that the presence in KNN single crystal (and absence in KNN ceramics) of such a long range order specific domain pattern that is its fingerprint accounts for the improved properties of single crystals. These results have broad implications for the expanded use of KNN materials, by establishing a relation between the domain patterns and the dielectric and ferroelectric response of single crystals and ceramics and by indicating ways of achieving maximised properties in KNN materials. Polarized Raman analysis of ferroelectric potassium sodium niobate (K0.5Na0.5)NbO3 (KNN) single crystals was performed. For the first time, an evidence is provided that supports the assignment of KNN single crystals structure to the monoclinic symmetry at room temperature. Intensities of A′, A″ and mixed A′+A″ phonons have been theoretically calculated and compared with the experimental data in dependence of crystal rotation, which allowed the precise determination of the Raman tensor coefficients for (non-leaking) modes in monoclinic KNN. In relation to the previous literature, this study clarifies that assigning monoclinic phase is more suitable than the orthorhombic one. In addition, this study is the basis for non-destructive assessments of domain distribution by Raman spectroscopy in KNN-based lead-free ferroelectrics with complex structures. Searching a deeper understanding of the electrical behaviour of both KNN single crystal and polycrystalline materials for the sake of designing optimized KNN materials, a comparative study at the level of charge transport and point defects was carried out by impedance spectroscopy. KNN single crystals showed lower conductivity than polycrystals from room temperature up to 200 ºC, but above this temperature polycrystalline KNN displays lower conductivity. The low temperature (T < 200 ºC) behaviour reflects the different processing conditions of both ceramics and single crystals, which account for less defects prone to charge transport in the case of single crystals. As temperature increases (T > 200 ºC) single crystals become more conductive than polycrystalline samples, in which grain boundaries act as barriers to charge transport. For even higher temperatures the conductivity difference between both is increased due to the contribution of ionic conduction in single crystals. Indeed the values of activation energy calculated to the high temperature range (T > 300 ºC) were 1.60 and 0.97 eV, confirming the charge transport due to ionic conduction and ionized oxygen vacancies in single crystals and polycrystalline KNN, respectively. It is suggested that single crystals with low defects content and improved electromechanical properties could be a better choice for room temperature applications, though at high temperatures less conductive ceramics may be the choice, depending on the targeted use. Aiming at engineering the properties of KNN polycrystals towards the performance of single crystals, the preparation and properties study of (001) – oriented (K0.5Na0.5)0.98Li0.02NbO3 (KNNL) ceramics obtained by templated grain growth (TGG) using KNN single crystals as templates was undertaken. The choice of KNN single crystals templates is related with their better properties and to their unique domain structure which were envisaged as a tool for templating better properties in KNN ceramics too. X-ray diffraction analysis revealed for the templated ceramics a monoclinic structure at room temperature and a Lotgering factor (f) of 40% which confirmed texture development. These textured ceramics exhibit a long range ordered domain pattern consisting of 90º and 180º domains, similar to the one observed in the single crystals. Enhanced dielectric (13017 at TC), ferroelectric (2Pr = 42.8 μC/cm2) and piezoelectric (d33 = 280 pC/N) properties are observed for textured KNNL ceramics as compared to the randomly oriented ones. This behaviour is suggested to be due to the long range ordered domain patterns observed in the textured ceramics. The obtained results as compared with the data previously reported on texture KNN based ceramics confirm that superior properties were found due to ordered repeated domain pattern. This study provides an useful approach towards properties improvement of KNN-based piezoelectric ceramics. Overall, the present results bring a significant contribution to the pool of knowledge on the properties of sodium potassium niobate materials: a relation between the domain patterns and di-, ferro-, and piezo-electric response of single crystals and ceramics was demonstrated and ways of engineering maximised properties in KNN materials, for example by texturing were established. This contribution is envisaged to have broad implications for the expanded use of KNN over the alternative lead-based materials.

Understanding and modelling hydrological and soil erosion processes in burnt forest catchments

Forest fires implications in overland flow and soil erosion have been researched for several years. Therefore, is widely known that fires enhance hydrological and geomorphological activity worldwide as also in Mediterranean areas. Soil burn severity has been widely used to describe the impacts of fire on soils, and has being recognized as a decisive factor controlling post-fire erosion rates. However, there is no unique definition of the term and the relationship between soil burn severity and post-fire hydrological and erosion response has not yet been fully established. Few studies have assessed post-fire erosion over multiple years, and the authors are aware of none which assess runoff. Small amount of studies concerning pre-fire management practices were also found. In the case of soil erosion models, the Revised Universal Soil Loss Equation (RUSLE) and the revised Morgan–Morgan–Finney (MMF) are well-known models, but not much information is available as regards their suitability in predicting post-fire soil erosion in forest soils. The lack of information is even more pronounced as regards post-fire rehabilitation treatments. The aim of the thesis was to perform an extensive research under the post fire hydrologic and erosive response subject. By understanding the effect of burn severity in ecosystems and its implications regarding post fire hydrological and erosive responses worldwide. Test the effect of different pre-fire land management practices (unplowed, downslope plowed and contour plowed) and time-since-fire, in the post fire hydrological and erosive response, between the two most common land uses in Portugal (pine and eucalypt). Assess the performance of two widely-known erosion models (RUSLE and Revised MMF), to predict soil erosion rates during first year following two wildfires of distinctive burn severity. Furthermore, to apply these two models considering different post-fire rehabilitation treatments in an area severely affected by fire. Improve model estimations of post-fire runoff and erosion rates in two different land uses (pine and eucalypt) using the revised MMF. To assess these improvements by comparing estimations and measurements of runoff and erosion, in two recently burned sites, as also with their post fire rehabilitation treatments. Model modifications involved: (1) focusing on intra-annual changes in parameters to incorporate seasonal differences in runoff and erosion; and (2) inclusion of soil water repellency in runoff predictions. Additionally, validate these improvements with the application of the model to other pine and eucalypt sites in Central Portugal. The review and meta-analysis showed that fire occurrence had a significant effect on the hydrological and erosive response. However, this effect was only significantly higher with increasing soil burn severity for inter-rill erosion, and not for runoff. This study furthermore highlighted the incoherencies between existing burn severity classifications, and proposed an unambiguous classification. In the case of the erosion plots with natural rainfall, land use factor affected annual runoff while land management affected both annual runoff and erosion amounts significantly. Time-since-fire had an important effect in erosion amounts among unplowed sites, while for eucalypt sites time affected both annual runoff and erosion amounts. At all studied sites runoff coefficients increase over the four years of monitoring. In the other hand, sediment concentration in the runoff, recorded a decrease during the same period. Reasons for divergence from the classic post-fire recovery model were also explored. Short fire recurrence intervals and forest management practices are viewed as the main reasons for the observed severe and continuing soil degradation. The revised MMF model presented reasonable accuracy in the predictions while the RUSLE clearly overestimated the observed erosion rates. After improvements: the revised model was able to predict first-year post-fire plot-scale runoff and erosion rates for both forest types, these predictions were improved both by the seasonal changes in the model parameters; and by considering the effect of soil water repellency on the runoff, individual seasonal predictions were considered accurate, and the inclusion of the soil water repellency in the model also improved the model at this base. The revised MMF model proved capable of providing a simple set of criteria for management decisions about runoff and erosion mitigation measures in burned areas. The erosion predictions at the validation sites attested both to the robustness of the model and of the calibration parameters, suggesting a potential wider application.

Blearning no ensino superior politécnico: estudo de avaliação do Mestrado em Turismo, Inovação e Desenvolvimento na ESTG de Viana do Castelo

As transformações tecnológicas e a crescente heterogeneidade dos alunos que frequentam o Ensino Superior, bem como a premente necessidade de financiamento num universo cada vez mais competitivo têm tornado necessária a implementação de mudanças ao nível das instituições que, cada vez mais têm de diversificar e flexibilizar a sua oferta pedagógica sem comprometer a qualidade de ensino aprendizagem. Encarado por muitos como uma solução viável e prática, o blearning tem vindo a assumir uma importância crescente neste contexto. No entanto, subsistem algumas dúvidas relativamente à forma como os cursos nesta modalidade estão a ser implementados e o seu impacto real nas aprendizagens dos alunos. Neste sentido torna-se necessário proceder à sua avaliação, aferindo a sua qualidade, validade e identificando vantagens e áreas problemáticas. Com uma vertente interventiva, uma vez que se desenvolveu um plano de atuação e se apresentou uma lista de recomendações, e assumindo a forma de um estudo de avaliação, esta investigação pretendeu cumprir esse desígnio. Envolvendo alunos, docentes e responsáveis institucionais procurou caracterizar-se e analisar-se a componente online do Mestrado em Turismo, Inovação e Desenvolvimento a funcionar na Escola Superior de Tecnologia e Gestão de Viana do Castelo, partindo dessa análise para a reflexão conjunta e trabalho de campo. Globalmente, concluiu-se que, muito embora os intervenientes assumam um posicionamento favorável à adoção do blearning, subsistem algumas reservas e desconhecimento por parte dos docentes e responsáveis relativamente à sua implementação na prática, verificando-se ainda uma grande discrepância entre as expectativas iniciais dos alunos e as suas perceções após um ano de frequência do mestrado. A lista final de recomendações a apresentar à instituição refletiu todo este processo, sendo o corolário de todo um trabalho que se pretende ver continuado e alargado a outros cursos e instituições.

Development of a sustainable method for the extraction of lycopene and β-carotene from food wastes

The main objective of the present work is the study of a profitable process not only in the extraction and selective separation of lycopene and β-carotene, two compounds present in tomato, but also in its potential application to food industry wastes. This is one of the industries that produce larger amounts of wastes, which are rich in high value biomolecules with great economic interest. However, the conventional methods used to extract this kind of compounds are expensive which limits their application at large scale. Lycopene and βcarotene are carotenoids with high commercial value, known for their antioxidant activity and benefits to human health. Their biggest source is tomato, one of the world’s most consumed fruits, reason for which large quantities of waste is produced. This work focuses on the study of diverse solvents with a high potential to extract carotenoids from tomato, as well as the search for more environmentally benign solvents than those currently used to extract lycopene and β-carotene from biomass. Additionally, special attention was paid to the creation of a continuous process that would allow the fractionation of the compounds for further purification. Thus, the present work started with the extraction of both carotenoids using a wide range of solvents, namely, organic solvents, conventional salts, ionic liquids, polymers and surfactants. In this stage, each solvent was evaluated in what regards their capacity of extraction as well as their penetration ability in biomass. The results collected showed that an adequate selection of the solvents may lead to the complete extraction of both carotenoids in one single step, particularly acetone and tetrahydrofuran were the most effective ones. However, the general low penetration capacity of salts, ionic liquids, polymers and surfactants makes these solvents ineffective in the solid-liquid extraction process. As the organic solvents showed the highest capacity to extract lycopene and βcarotene, in particular tetrahydrofuran and acetone, the latter solvent used in the development process of fractionation, using to this by strategic use of solvents. This step was only successfully developed through the manipulation of the solubility of each compound in ethanol and n-hexane. The results confirmed the possibility of fractionating the target compounds using the correct addition order of the solvents. Approximately, 39 % of the β-carotene was dissolved in ethanol and about 64 % of lycopene was dissolved in n-hexane, thus indicating their separation for two different solvents which shows the selective character of the developed process without any prior stage optimization. This study revealed that the use of organic solvents leads to selective extraction of lycopene and β-carotene, allowing diminishing the numerous stages involved in conventional methods. At the end, it was possible to idealize a sustainable and of high industrial relevance integrated process, nevertheless existing the need for additional optimization studies in the future.

Photodegradation of sertraline by solar radiation and influencing factors

Photodegradation is considered to be one of the most important processes of elimination of pharmaceutical drugs from natural water matrices. The high consumption and discharge of these substances, in particular antidepressants, to the aquatic environment supports the need to study degradation processes. This dissertation aimed at studying the direct and indirect photodegradation of sertraline, an antidepressant known for its persistence in the environment, and the evaluation of the influence of environmentally relevant factors in its photodegradation. The photodegradation experiments were developed under simulated solar light and the irradiation times converted to summer sunny days (SSD), an equivalent time in natural environmental conditions. The direct photodegradation was evaluated in solutions of sertraline prepared in ultrapure water and the indirect photodegradation was studied through the addition of photosensitizers (humic substances, Fe(III), nitrates and oxygen). Further irradiation studies were perfomed in aqueous samples collected from two wastewater treatment plants, Vouga river and Ria de Aveiro. The samples were chemically characterized (dissolved organic carbon, nitrates and nitrites and iron determination and UV/Vis spectroscopy). The quantification of sertraline was done by HPLC-UV and photoproducts from direct photodegradation were identified by electrospray mass spectrometry. An observed direct photodegradation rate of sertraline of 0.0062 h-1 was determined, corresponding to a half-life time of 111 h (equivalent to 29 SSD). A significant influence of photosensitizers was observed, the best results being achieved in irradiations of sertraline with humic acids, obtaining a half-life time of 12 h. This was attributed to the hydrophobicity of this substance and higher absortivity in the UV/Vis wavelength, which promote processes of indirect photodegradation. The degradation of sertraline in natural samples was also enhanced comparatively to the direct photodegradation, achieving half-life times between 10 and 25h; the best results were achieved in samples from the primary treatment of a wastewater treatment plant and Ria de Aveiro, with half-life times of 10 and 16 h, respectively. A total of six photoproducts formed during the direct photodegradation of sertraline were identified, three of which were not yet identified in the literature. The main factors contributing to the degradation of sertraline were analysed but this was not fully accomplished, requiring further studies of the composition of the natural matrices and the combined influence of distinct photosensitizers during the irradiation. Nevertheless, it was concluded that the photodegradation of sertraline is greatly influenced by indirect photodegradation processes, promoted by the presence of photosensitizers.

Mapeamento genómico de um gene de resistência ao míldio em Brassica oleracea L.

Tese dout., Biologia, Universidade do Algarve, 2006

A arquitectura monástica e conventual feminina em Portugal, nos séculos XIII e XIV

Tese de dout., História da Arte (História da Arte Islâmica e Medieval), Faculdade de Ciências Humanas e Sociais, Univ. do Algarve, 2007

Atracção interpessoal numa população de estudantes universitários: um estudo do ajustamento das expectativas à realidade

Tese dout., Psicologia, Universidade do Algarve, 2010

Protecção e avaliação de marcadores do stress foto-oxidativo em Ceratonia siliqua L. e Tuberaria major (Willk) P. Silva & Rozeira sob altas temperaturas e défice hídrico

Dissertação mest., Engenharia Biológica, Universidade do Algarve, 2009