989 resultados para H2O
Resumo:
The structure of silicon surfaces in the orientation range (113)-(5,5,12)-(337)-(112) has been investigated using high resolution LEED and photoemission both on a spherical and on flat samples. We find that Si(5,5,12) [5.3 degrees from (113) and 0.7 degrees from (937)] is the only stable orientation between (113) and (111) and confirm the result of Baski et al. [Science 269, 1556 (1995)] that it has a 2 x 1 superstructure with a very large unit cell of 7.68 x 53.5 Angstrom(2). Adsorption measurements of water on Si(5,5,12) yield a mobile precursor kinetics with two kinds of regions saturating at 0.25 and 0.15 ML which are related to adsorption on different sites. Using these results, a modified structure model is proposed. Surfaces between (113) and (5,5,12) separate into facets of these two orientations; between (5,5,12) and (112), they separate into (5,5,12) and (111) facets. (337) facets in this range may be considered as defective (5,5,12) facets.
Resumo:
CO2H2O LI-CORLi-6400Fraxinus mandshuricaCO2H2O 1CO2H2O 2200s20s180s <3, < 10% 318.53%600s 4 > >CO2>>>H2O> >>PARVPD 5CO2H2OPAR
Resumo:
Pseudomonas spWBC-3X-MPHPseudomonas sP.WBC-3H398-1393 bp33135MPHOPHPDBMPH95MPHMPHPIP43212MPH43212MADMPHMPHOPHAsP 151His 152His 302His 147His 149His 234A255H2OH2OMPHMPHTrp179Phe 196Phe 119W179FW179AF196WF196AFllgWFll9ATrp 179PhelMPHPhe 119
Resumo:
A novel method based on wavelength-multiplexed line-of-sight absorption and profile fitting for non-uniform flow field measurement is reported. A wavelength scanning combing laser temperature and current modulation WMS scheme is used to implement the wavelength-multiplexed-profile fitting method. Second harmonic (2f) signal of eight H2O transitions features near 7,170 cm(-1) are measured in one period using a single tunable diode laser. Spatial resolved temperature distribution upon a CH4/air premixed flat flame burner is obtained. The result validates the feasibility of strategy for non-uniform flow field diagnostics by means of WMS-2f TDLAS.
Resumo:
(TDLAS)7185.597 cm-17444.37cm-1+7444.37cm-1()H2O-4kHzC2H4
Resumo:
1, 4-1eq H2O99% 88% eedr = 8:921, 4- 1, 4-1, 4-1, 4, 5, 6- Calalytic enantioselective reduction of imines and enamines represents one of the most straightforward and efficient methods for the preparation of chiral amines, which is an important class of intermediates for the synthesis of natural products and chiral drugs. Significant progresses have been made in organocatalytic enantioselective reduction of imines. However, asymmetric reduction of enamines, especially of cyclic enamines catalyzed by small organocatalysts has scarcely been reported. In this study, starting from chiral tert-butanesulfinamide, a series of structurally simple tert-butanesulfinyl urea and thiourea organocatalysts were developed and employed in asymmetric reduction of enamines by triclorosilane, particularly in the reduction of cyclic enamines such as Hantzsch 1, 4-dihydropyridines. During the optimization of reaction condictions, we found that the addition of one equivalent of H2O could significantly improve the yields and enatioselectivities. Under optimal condictions, 99% yield, up to 88% ee, and 8:92 diastereomeric ratio were obtained. Thus, we have for the first time realized the highly stereoselective reduction of Hantzsch 1, 4-dihydropyridines catalyzed by triclorosilane. As for the mechanism, we speculate that the Hantzsch 1, 4-dihydropyridine was firstly engaged with the catalyst through hydrogen bond. The proton released from the reaction of the additive and triclorosilane next added to one of the C=C bond to make an active iminium intermediate, which was then attacked by the nucleophlic hydrogen of HSiCl3 activated by the Lewis basic sulfinyl function of the catalyst to provide superior trans-1, 4, 5, 6-tetrahydropyridine products.
Resumo:
1,6-[3,2,1]C-1 C-6 C-1 C-6 1,6-2-C--1,6-1-1951-1971-198 2-C--6-1,6-1-2251,6-NiCl5 1-1951-1971-198 ROHRSH NiCl5-2-C---2-C---2-C-1,6- Fischer Fischer-Zach Zn-NaH2PO4-H2O Zn-PEG600-H2O Zn-NaH2PO4 Zn-PEG600 The 1,6-anhydrohexopyranoses are crucial subunits of myriad bioactive nature products, as well as important syntons of carbohydrate chemistry which have been extensively used to prepare the biologically potential oligosaccharides, glycoconjugates, antibiotics, and structurally varied nature products. Their particular [3.2.1] bicyclic skeleton makes them have high regio- and stereo-control in a variety of reactions, and such structure avoids protecting hydroxyl groups at C1 and C6.Additionally, the cleavage of the internal acetal under acidic conditions could be beneficial for further transformations of functional group and glycosylation of the corresponding pyranosyl sugar at the C6 or C1 site. Herein we developed a novel approach to prepare the 1,6-anhydrohexopyranose, and synthesized the 2-C-branched-1,6-anhydrohexopyranose 1-195, 1-197, 1-198 and 2-C-branched-6-thio-1,6-anhydrohexopyranose 1-225. Until now, glycosylation of 1,6-anhydrohexopyranoses has been limited because of the low yields and low stereoselectivity. In this paper, we found that NiCl5-MeCN system could selectively cleave the ring of 1,6-anhydrohexopyranoses with alcohols and thiols at room temperature in high yields. A series of 2-C-branched--glycosides and 2-C-branched--thioglycosides have been synthesized via NiCl5-catalyzed. Furthermore, we investigated the formation and ring-opening mechanism of 2-C-acetylmethyl-1,6-anhydrohexopyranose. Glycals are significant starting material in carbohydrate chemistry. After the Fischer-Zach method for forming glucal was reported for the first time, the numerous synthetic methods for glycals have been explored. However, there are several drawbacks in the existing methods, such as the usage of very expensive and toxic reagents, intricate operation, and the influence of acid-sensitive and base-sensitive functional group. We improved the Fischer-Zach method and developed a facile, mild and environmentally benign methodology towards the synthesis of the glycals in Zn-NaH2PO4-H2O or Zn-PEG600-H2O system. Our method involves the treatment of glycosyl bromides with Zn in NaH2PO4 aqueous solution or PEG600-H2O at room temperature, affording various glycals in excellent yields.
Resumo:
4 B5C3D3-2D4-14 1 1% H2SO425% NH3 H2O12% NaOH2 3 12% NaOH21.04 mL g-175 57.3%96 pH 4.5 ~ 6.045 ~ 55 g L-1VFAs 4 B5 D4-1 B5 D4-1 B5+D4-1 B5+D4-1 11.4 mL g-1B5 D4-1 1.6 3.1 B5+D4-1 31.6%B5 D4-1 1.3 2.4 B5+D4-1 35.0%11.8%B5 1.2 1.1 D4-11.5 1.3 B5D4-1 B5+D4-1 VFAsB5 D4-1 B5+D4-1 The fermentative bio-hydrogen production by anaerobic hydrogen bacteria preserved in our laboratory from the straw which had been pretreated by four anaerobic cellulolytic decomposition strains of B5, C3, D3-2, D4-1 which were isolated and screened from giant pandas excrement and biogas fermentation enrichments conserved in our laboratory was studied. Besides, the impact of chemical(1% H2SO425% NH3H2O and 12% NaOH), biological (cellulolytic strains of B5, C3, D3-2, D4-1) and chemical-biological combination pretreatment on bio-hydrogen production from straw by fermentation was also comparatively studied. The experiments showed that the best results of bio-hydrogen production were obtained from the straw with 12% NaOH-biological combination pretreatment method, its capability of bio-hydrogen production was 21.04 mL g-1, which was 75 times higher than the straw without pretreatment; the maximum concentration of H2 was 57.3%, which was 96 times higher than the straw without pretreatment; its optimum pH range was 4.5 ~ 6.0, and its optimum range of substrate concentration was 45 ~ 55 g L-1; In the process of fermentation, the main composition of VFAs were acetate and butyrate. Among the four strains of B5, C3, D3-2, D4-1, B5 and D4-1 have the function of hydrogen-producing by cellulose used as substrate when it decompose cellulose, so the preliminary exploration and research on fermentative bio-hydrogen production by B5, D4-1 and B5+D4-1 which directly used straw as substrate was carried out. The results showed that the combination strains of B5+D4-1 was strikingly better than either B5 or D4-1 strain in the fermentative hydrogen production. The hydrogen-production capability of B5+D4-1 was 11.4 mL g-1 which was respectively 1.6 times and 3.1times higher than B5 and D4-1; the maximum hydrogen concentration of B5+D4-1 was 31.6% which was respectively 1.3 times and 2.4 times higher than B5 and D4-1. In the process of fermentation, the maximum degradation rate of cellulose and hemicellulose in straw was respectively 35.0% and 11.8% by B5+D4-1, which was 1.2 times and 1.1 times higher than B5, and was 1.5 times and 1.3 times higher than D4-1 respectively. The Volatile Fattty Acids(VFAs) generated in the process of fermentation with strains of B5, D4-1 and B5+D4-1 were all mainly acetate. Acetate and butyrate were detected in the process of fermentation with B5, ethonal, acetate and butyrate were detected in the process of fermentation with D4-1 and B5+D4-1.
Resumo:
,H2O12.5a0/fsC+C2+H2O,,,,H2O;,
Resumo:
In this review, a few examples of state-to-state dynamics studies of both unimolecular and bimolecular reactions using the H-atom Rydberg tagging TOF technique were presented. From the H2O photodissociation at 157 nm, a direction dissociation example is provided, while photodissociation of H2O at 121.6 has provided an excellent dynamical case of complicated, yet direct dissociation process through conical intersections. The studies of the O(D-1) + H-2 --> OH+H reaction has also been reviewed here. A prototype example of state-to-state dynamics of pure insertion chemical reaction is provided. Effect of the reagent rotational excitation and the isotope effect on the dynamics of this reaction have also been investigated. The detailed mechanism for abstraction channel in this reaction has also been closely studied. The experimental investigations of the simplest chemical reaction, the H-3 system, have also been described here. Through extensive collaborations between theory and experiment, the mechanism for forward scattering product at high collision energies for the H+HD reaction was clarified, which is attributed to a slow down mechanism on the top of a quantized barrier transition state. Oscillations in the product quantum state resolved different cross sections have also been observed in the H+D-2 reaction, and were attributed to the interference of adiabatic transition state pathways from detailed theoretical analysis. The results reviewed here clearly show the significant advances we have made in the studies of the state-to-state molecular reaction dynamics.
Resumo:
A 2-kW-class chemical oxygen-iodine laser (COIL) using nitrogen buffer gas has been developed and tested since industrial applications of COIL devices will require the use of nitrogen as the buffer gas. The laser, with a gain length of 11.7 cm, is energized by a square pipe-array jet-type singlet oxygen generator (SPJSOG) and employs a nozzle bank with a designed Mach number of 2.5. The SPJSOG has advantages over the traditional plate-type JSOG in that it has less requirements on basic hydrogen peroxide (BHP) pump, and more important, it has much better operational stability. The SPJSOG without a cold trap and a gas-liquid separator could provide reliable operations for a total gas flow rate up to 450 mmol/s and with a low liquid driving pressure of around 0.7 atm or even lower. The nozzle bank was specially designed for a COIL using nitrogen as the buffer gas. The cavity was designed for a Mach number of 2.5, in order to provide a gas speed and static temperature in the cavity similar to that for a traditional COIL with helium buffer gas and a Mach 2 nozzle. An output power of 2.6 kW was obtained for a chlorine flow rate of 140 mmol/s, corresponding to a chemical efficiency of 20.4%. When the chlorine flow rate was reduced to 115 mmol/s, a higher chemical efficiency of 22.7% was attained. Measurements showed that the SPJSOG during normal operation could provide a singlet oxygen yield Y greater than or equal to 55%, a chlorine utilization U greater than or equal to 85%, and a relative water vapor concentration w = [H2O]/([O-2] + [Cl-2]) less than or equal to 0.1.
Resumo:
,-,13.,,,,7[M+H]+6[M+H-H2O]+,.:13911000ng·ml-1,,>0.9990;83.75%111.50%,2.02%14.21%;,15ng·ml-1,5ng·ml-1;,,.
Resumo:
Multiphoton ionization of the hydrogen,bonded pyrrole-water clusters (C4H5N)(n)(H2O)(m) is studied with a reflectron-time of flight mass spectrometer at 355 mn. With increasing partial concentration of pyrrole in a gas mixture source, a series of poly-pyrrole-water binary-mixed cluster ions can be observed, including unprotonated cluster ions [(C4H5N)(x)(H2O)(y)](+), protonated cluster ions [(C4H5N)(x)(H2O)(y)](+) and dehydrogenated cluster ions [(C4H4N)(C4H5N)(x)(H2O)(y)](+). Ab initio calculations of their structures, bond strengths, charge distributions and reaction energies are carried out. Stable structures of these clusters are obtained from the calculations. A probable formation mechanism of the cluster ions [(C4H5N)(x)(H2O)(y)](+), [(C4H5N)(x)(H2O)(y)]H+ and [(C4H4N)(C4H5N)(x) (H2O)(y)](+) is supposed to be the ionization of clusters followed by dissociation.
Resumo:
Multiphoton ionization of binary mixed clusters (C5H5N)(x)-(H2O)(y) at 532, 355 and 266 nm laser wavelengths has been investigated using TOF mass spectrometer. The experiments showed that almost all the products were protonated ions, At 532 and 355 nm, the products were mainly protonated pyridine clusters (C5H5N)(n)-H+, while at 266 nm, mixed binary cluster ions (C5H5N)(m)- (H2O)(n)-H+ appeared. It was found that the abundance of the [(C5H5N)(3)-H2O-H](+) ions was abnormally high. The calculation indicated that the ion [(C5H5N)(3)-H2O-H](+) is Of a kind of magic number structures with C-3v symmetry. A stepwise reaction mechanism is suggested that photoionization is followed by dissociation. (C) 2001 Elsevier Science B.V. All rights reserved.
