Intrinsic ROS-production capacity of nanoparticles

Engineered nanomaterials (ENMs) exhibit special physicochemical properties and thus are finding their way into an increasing number of industries, enabling products with improved properties. Their increased use brings a greater likelihood of exposure to the nanoparticles (NPs) that could be released during the life cycle of nano-abled products. The field of nanotoxicology has emerged as a consequence of the development of these novel materials, and it has gained ever more attention due to the urgent need to gather information on exposure to them and to understand the potential hazards they engender. However, current studies on nanotoxicity tend to focus on pristine ENMs, and they use these toxicity results to generalize risk assessments on human exposure to NPs. ENMs released into the environment can interact with their surroundings, change characteristics and exhibit toxicity effects distinct from those of pristine ENMs. Furthermore, NPs' large surface areas provide extra-large potential interfaces, thus promoting more significant interactions between NPs and other co-existing species. In such processes, other species can attach to a NP's surface and modify its surface functionality, in addition to the toxicity in normally exhibits. One particular occupational health scenario involves NPs and low-volatile organic compounds (LVOC), a common type of pollutant existing around many potential sources of NPs. LVOC can coat a NP's surface and then dominate its toxicity. One important mechanism in nanotoxicology is the creation of reactive oxygen species (ROS) on a NP's surface; LVOC can modify the production of these ROS. In summary, nanotoxicity research should not be limited to the toxicity of pristine NPs, nor use their toxicity to evaluate the health effects of exposure to environmental NPs. Instead, the interactions which NPs have with other environmental species should also be considered and researched. The potential health effects of exposure to NPs should be derived from these real world NPs with characteristics modified by the environment and their distinct toxicity. Failure to suitably address toxicity results could lead to an inappropriate treatment of nano- release, affect the environment and public health and put a blemish on the development of sustainable nanotechnologies as a whole. The main objective of this thesis is to demonstrate a process for coating NP surfaces with LVOC using a well-controlled laboratory design and, with regard to these NPs' capacity to generate ROS, explore the consequences of changing particle toxicity. The dynamic coating system developed yielded stable and replicable coating performance, simulating an important realistic scenario. Clear changes in the size distribution of airborne NPs were observed using a scanning mobility particle sizer, were confirmed using both liquid nanotracking analyses and transmission electron microscopy (TEM) imaging, and were verified thanks to the LVOC coating. Coating thicknesses corresponded to the amount of coating material used and were controlled using the parameters of the LVOC generator. The capacity of pristine silver NPs (Ag NPs) to generate ROS was reduced when they were given a passive coating of inert paraffin: this coating blocked the reactive zones on the particle surfaces. In contrast, a coating of active reduced-anthraquinone contributed to redox reactions and generated ROS itself, despite the fact that ROS generation due to oxidation by Ag NPs themselves was quenched. Further objectives of this thesis included development of ROS methodology and the analysis of ROS case studies. Since the capacity of NPs to create ROS is an important effect in nanotoxicity, we attempted to refine and standardize the use of 2'7-dichlorodihydrofluorescin (DCFH) as a chemical tailored for the characterization of NPs' capacity for ROS generation. Previous studies had reported a wide variety of results, which were due to a number of insufficiently well controlled factors. We therefore cross-compared chemicals and concentrations, explored ways of dispersing NP samples in liquid solutions, identified sources of contradictions in the literature and investigated ways of reducing artificial results. The most robust results were obtained by sonicating an optimal sample of NPs in a DCFH-HRP solution made of 5,M DCFH and 0.5 unit/ml horseradish peroxidase (HRP). Our findings explained how the major reasons for previously conflicting results were the different experimental approaches used and the potential artifacts appearing when using high sample concentrations. Applying our advanced DCFH protocol with other physicochemical characterizations and biological analyses, we conducted several case studies, characterizing aerosols and NP samples. Exposure to aged brake wear dust engenders a risk of potential deleterious health effects in occupational scenarios. We performed microscopy and elemental analyses, as well as ROS measurements, with acellular and cellular DCFH assays. TEM images revealed samples to be heterogeneous mixtures with few particles in the nano-scale. Metallic and non-metallic elements were identified, primarily iron, carbon and oxygen. Moderate amounts of ROS were detected in the cell-free fluorescent tests; however, exposed cells were not dramatically activated. In addition to their highly aged state due to oxidation, the reason aged brake wear samples caused less oxidative stress than fresh brake wear samples may be because of their larger size and thus smaller relative reactive surface area. Other case studies involving welding fumes and differently charged NPs confirmed the performance of our DCFH assay and found ROS generation linked to varying characteristics, especially the surface functionality of the samples. Les nanomatériaux manufacturés (ENM) présentent des propriétés physico-chimiques particulières et ont donc trouvés des applications dans un nombre croissant de secteurs, permettant de réaliser des produits ayant des propriétés améliorées. Leur utilisation accrue engendre un plus grand risque pour les êtres humains d'être exposés à des nanoparticules (NP) qui sont libérées au long de leur cycle de vie. En conséquence, la nanotoxicologie a émergé et gagné de plus en plus d'attention dû à la nécessité de recueillir les renseignements nécessaires sur l'exposition et les risques associés à ces nouveaux matériaux. Cependant, les études actuelles sur la nanotoxicité ont tendance à se concentrer sur les ENM et utiliser ces résultats toxicologiques pour généraliser l'évaluation des risques sur l'exposition humaine aux NP. Les ENM libérés dans l'environnement peuvent interagir avec l'environnement, changeant leurs caractéristiques, et montrer des effets de toxicité distincts par rapport aux ENM originaux. Par ailleurs, la grande surface des NP fournit une grande interface avec l'extérieur, favorisant les interactions entre les NP et les autres espèces présentes. Dans ce processus, d'autres espèces peuvent s'attacher à la surface des NP et modifier leur fonctionnalité de surface ainsi que leur toxicité. Un scénario d'exposition professionnel particulier implique à la fois des NP et des composés organiques peu volatils (LVOC), un type commun de polluant associé à de nombreuses sources de NP. Les LVOC peuvent se déposer sur la surface des NP et donc dominer la toxicité globale de la particule. Un mécanisme important en nanotoxicologie est la création d'espèces réactives d'oxygène (ROS) sur la surface des particules, et les LVOC peuvent modifier cette production de ROS. En résumé, la recherche en nanotoxicité ne devrait pas être limitée à la toxicité des ENM originaux, ni utiliser leur toxicité pour évaluer les effets sur la santé de l'exposition aux NP de l'environnement; mais les interactions que les NP ont avec d'autres espèces environnementales doivent être envisagées et étudiées. Les effets possibles sur la santé de l'exposition aux NP devraient être dérivés de ces NP aux caractéristiques modifiées et à la toxicité distincte. L'utilisation de résultats de toxicité inappropriés peut conduire à une mauvaise prise en charge de l'exposition aux NP, de détériorer l'environnement et la santé publique et d'entraver le développement durable des industries de la nanotechnologie dans leur ensemble. L'objectif principal de cette thèse est de démontrer le processus de déposition des LVOC sur la surface des NP en utilisant un environnement de laboratoire bien contrôlé et d'explorer les conséquences du changement de toxicité des particules sur leur capacité à générer des ROS. Le système de déposition dynamique développé a abouti à des performances de revêtement stables et reproductibles, en simulant des scénarios réalistes importants. Des changements clairs dans la distribution de taille des NP en suspension ont été observés par spectrométrie de mobilité électrique des particules, confirmé à la fois par la méthode dite liquid nanotracking analysis et par microscopie électronique à transmission (MET), et a été vérifié comme provenant du revêtement par LVOC. La correspondance entre l'épaisseur de revêtement et la quantité de matériau de revêtement disponible a été démontré et a pu être contrôlé par les paramètres du générateur de LVOC. La génération de ROS dû aux NP d'argent (Ag NP) a été diminuée par un revêtement passif de paraffine inerte bloquant les zones réactives à la surface des particules. Au contraire, le revêtement actif d'anthraquinone réduit a contribué aux réactions redox et a généré des ROS, même lorsque la production de ROS par oxydation des Ag NP avec l'oxygène a été désactivé. Les objectifs associés comprennent le développement de la méthodologie et des études de cas spécifique aux ROS. Etant donné que la capacité des NP à générer des ROS contribue grandement à la nanotoxicité, nous avons tenté de définir un standard pour l'utilisation de 27- dichlorodihydrofluorescine (DCFH) adapté pour caractériser la génération de ROS par les NP. Des etudes antérieures ont rapporté une grande variété de résultats différents, ce qui était dû à un contrôle insuffisant des plusieurs facteurs. Nous avons donc comparé les produits chimiques et les concentrations utilisés, exploré les moyens de dispersion des échantillons HP en solution liquide, investigué les sources de conflits identifiées dans les littératures et étudié les moyens de réduire les résultats artificiels. De très bon résultats ont été obtenus par sonication d'une quantité optimale d'échantillons de NP en solution dans du DCFH-HRP, fait de 5 nM de DCFH et de 0,5 unité/ml de Peroxydase de raifort (HRP). Notre étude a démontré que les principales raisons causant les conflits entre les études précédemment conduites dans la littérature étaient dues aux différentes approches expérimentales et à des artefacts potentiels dus à des concentrations élevées de NP dans les échantillons. Utilisant notre protocole DCFH avancé avec d'autres caractérisations physico-chimiques et analyses biologiques, nous avons mené plusieurs études de cas, caractérisant les échantillons d'aérosols et les NP. La vielle poussière de frein en particulier présente un risque élevé d'exposition dans les scénarios professionnels, avec des effets potentiels néfastes sur la santé. Nous avons effectué des analyses d'éléments et de microscopie ainsi que la mesure de ROS avec DCFH cellulaire et acellulaire. Les résultats de MET ont révélé que les échantillons se présentent sous la forme de mélanges de particules hétérogènes, desquels une faible proportion se trouve dans l'échelle nano. Des éléments métalliques et non métalliques ont été identifiés, principalement du fer, du carbone et de l'oxygène. Une quantité modérée de ROS a été détectée dans le test fluorescent acellulaire; cependant les cellules exposées n'ont pas été très fortement activées. La raison pour laquelle les échantillons de vielle poussière de frein causent un stress oxydatif inférieur par rapport à la poussière de frein nouvelle peut-être à cause de leur plus grande taille engendrant une surface réactive proportionnellement plus petite, ainsi que leur état d'oxydation avancé diminuant la réactivité. D'autres études de cas sur les fumées de soudage et sur des NP différemment chargées ont confirmé la performance de notre test DCFH et ont trouvé que la génération de ROS est liée à certaines caractéristiques, notamment la fonctionnalité de surface des échantillons.

Älykäs viestintäjärjestelmä

TeliaSoneran SME-viestintäjärjestelmän tarkoituksena on toimia demo- ja kehitysalustana uusille viestintäpalveluille. Näitä palveluita ovat esimerkiksi tilatiedon seuraaminen ja muuttaminen sekä pikaviestien lähettäminen ja vastaanottaminen eri alustoilla, kuten matkapuhelimilla, PDA-laitteilla, PC:eillä. Järjestelmän tulee myös toimia helppona yhteysrajapintana mahdollisille tuleville tiedonsiirtoteille. Pikaviestien lähetys- ja puhelujensignalointiprotokollana järjestelmässä toimii SIP. Järjestelmän sisäisenä kommunikaatioprotokollana toimii CORBA. Työn osuus ja tämän dokumentin fokus ovat järjestelmäytimessä eli Core:ssa. Core:n avulla järjestelmän eri komponentit, kuten SIP-, WAP- ja WWW-viestinvälityspalvelimet sidotaan toisiinsa sekä tietokantaan. Ytimen tehtäviin kuuluu myös käyttäjien tilatietojen ylläpito, viestien reititys eri päätelaitteisiin, ryhmäviestintä sekä pikaviestikomentojen toiminnallisuus, eli sanalla sanoen älykkyys. Lisäksi työssä tarkastellaan ytimen käyttämiä rajapintoja ja niiden toteutustekniikoita, projektin toteutukseen käytettyjä työkaluja sekä järjestelmän tarjoamia palveluita yksityiskohtaisemmin ytimen kannalta. Lopuksi luodaan silmäys tulevaisuuden näkymiin ja järjestelmän nykytilaan sekä kokonaisuutena hyvin menneen projektin tavoitteisiin.

Evaluación de las interfaces de consulta en las colecciones digitales patrimoniales españolas

Se analizan las interfaces de consulta de 31 repositorios patrimoniales españoles con el objetivo de identificar sus puntos fuertes y sus puntos débiles. Los elementos analizados (ayudas, consulta multilingüe, modalidades de búsqueda, lenguajes de interrogación, etc.) han sido establecidos a partir de la bibliografía especializada, tanto la que hace referencia de manera específica a las interfaces de consulta de todo tipo de repositorios, como la que trata el tema desde una perspectiva distinta o más amplia (por ejemplo, interfaces de catálogos de bibliotecas, usabilidad). Se propone una serie de recomendaciones con el fin de mejorar los puntos débiles detectados.

Development of the Simulation Environment for the Mobile Phone User Interfaces

Diplomityössä käsitellään Nokia Mobile Phonesin matkapuhelimien käyttöliittymäohjelmistojen suunnittelu-ja testausympäristön kehitystä. Ympäristöön lisättiin kaksi ohjelmistomodulia avustamaan simulointia ja versionhallintaa. Visualisointityökalulla matkapuhelimen toiminta voidaan jäljittää suunnittelu- kaavioihin tilasiirtyminä, kun taas vertailusovelluksella kaavioiden väliset erot nähdään graafisesti. Kehitetyt sovellukset parantavat käyttöliittymien suunnitteluprosessia tehostaen virheiden etsintää, optimointia ja versionhallintaa. Visualisointityökalun edut ovat merkittävät, koska käyttöliittymäsovellusten toiminta on havaittavissa suunnittelu- kaavioista reaaliaikaisen simuloinnin yhteydessä. Näin virheet ovat välittömästi paikannettavissa. Lisäksi työkalua voidaan hyödyntää kaavioita optimoitaessa, jolloin sovellusten kokoja muistintarve pienenee. Graafinen vertailutyökalu tuo edun rinnakkaiseen ohjelmistosuunnitteluun. Eri versioisten suunnittelukaavioiden erot ovat nähtävissä suoraan kaaviosta manuaalisen vertailun sijaan. Molemmat työkalut otettiin onnistuneesti käyttöön NMP:llä vuoden 2001 alussa.

Liiketoiminnan ohjausraportoinnin kehittäminen

Tämän tutkimuksen tavoitteena oli määritellä kohdeyrityksen, Paroc Oy Ab:n, liiketoimintaprosessiin liittyvät keskeiset alueet ja mahdolliset ongelmakohdat sekä kehittää ennakointia mahdollistavaa raportointia. Päätavoite jaettiin kolmeen keskeiseen aihealueeseen. Ensimmäinen aihealue käsitti kokonaistoimintaprosessin kuvauksen ohjattavuuden näkökulmasta, liiketoimintaprosessissa toiminnan sujumiseen keskeisimmin vaikuttavien kohtien kuvauksen ja raportoinnin kytkeytymisen näihin kohtiin. Toinen aihealue käsitti Rakennuseristeiden kotimaan myynnin raportoinnin ja kolmas aihealue raporttikartan ja sen kehittämisen. Tutkimus toteutettiin pääosin konstruktiivisella tutkimusotteella, vaikka alussa tehtiinkin käsitemäärittelyjä työn vaatimassa laajuudessa. Tutkimukseen liittyy osittain toiminta-analyyttisen tutkimusotteen piirteitä.Työn teoreettinen osa tehtiin kirjallisuustutkimuksena. Teoreettisessa osassa käytiin työhön liittyen läpi seuraavat käsitteet: liiketoimintaprosessi, logistiikka, ohjaus, raportointi ja kannattavuus. Teoreettisessa osassa luodun viitekehyksen tarkoitus oli tukea tutkimuksen empiiristä osaa.Empiirinen osa toteutettiin case-tutkimuksena. Sen yhteydessä käytiin kohdeyrityksen sisäiseen ja ulkoiseen käyttöön tarkoitettua materiaalia läpi sekä tehtiin kysely Rakennuseristeiden eri toiminnoissa työskenteleville henkilöille. Kyselyn avulla tutkittiin päätöksentekotilanteita ja tiedontarvetta, ongelmatilanteita, raportointia sekä mahdollisia puutteita.Tutkimuksessa on tarkasteltu kohdeyrityksen liiketoimintaprosessiin liittyviä toimintoja ja tietojärjestelmiä sekä budjetointiprosessia. Rakennuseristeiden kotimaan myynnin raportoinnin osalta on tutkittu teknistä toteutusta, raporttien hyväksikäyttöä, poikkeamien analysointia ja myynnin tasoon vaikuttavia tekijöitä. Raporttikartan kehittämisen yhteydessä on tutkittu päätöksentekoon liittyvää tiedon tarvetta sekä raportointia. Näiden perusteella on esitetty kehittämiskohteita ja mahdollisia jatkotutkimuksen aiheita.Keskeisimmiksi kehittämiskohteiksi nostettiin myynnin perusraportoinnin laajentaminen, tietojärjestelmien välisen tiedon kulun parantaminen ja tietojärjestelmiä koskevan integraation kehittäminen sekä eri toiminnoissa työskentelevien henkilöiden välisen yhteistyön parantaminen. Näitä kehittämällä parannetaan ennakointia mahdollistavaa ohjausraportointia johdon päätöksenteon tueksi.

El taller ceràmic d'època romana del carrer Princesa de Barcelona. Estudi arqueològic de les restes i estudi arqueomètric del material ceràmic

Les excavacions arqueològiques recents realitzades al carrer Princesa 21 de Barcelona han tret a la llum noves evidències de la producció de ceràmica romana a l"àrea perifèrica de Barcino. Aquest taller ceràmic presenta dues fases cronològiques, des del començament del segle I dC fins al II dC, i va produir àmfores Pascual 1 i Dressel 2-4, ceràmica comuna, tegulae i pondii. L"origen d"aquest taller està relacionat amb la fundació de la colònia romana de Barcino i la imposició de les estructures econòmiques i socials romanes. Fins avui, s"han caracteritzat 42 fragments d"àmfores Pascual 1, 2 pondii i 4 mostres d"argila mitjançant la tècnica de Fluorescència de Raigs X (FRX) en l"estudi de procedència, i les composicions mineralògiques s"han determinat mitjançant anàlisis per Difracció de Raigs X (DRX) per entendre"n les característiques tecnològiques. Aquestes anàlisis demostren una producció amfòrica homogènia i estandarditzada, realitzada amb una pasta calcària normalment cuita a alta temperatura.

Material educativo en la diabetes gestacional

Este artículo presenta el material didáctico elaborado para facilitar la tarea educativa en las mujeres diagnosticadas de diabetes gestacional.

Material educativo en la diabetes gestacional

Este artículo presenta el material didáctico elaborado para facilitar la tarea educativa en las mujeres diagnosticadas de diabetes gestacional.

PRODUÇÃO DE MATERIAL INSTRUCIONAL PARA O ENSINO DA RADIOLOGIA POR MEIO DA DIGITALIZAÇÃO DE IMAGENS

Criou-se um banco de dados usando a digitalização de imagens radiográficas para salvá-las da deterioração do tempo e, também, tornar mais ágil sua manipulação pelos profissionais que as utilizam. Foi criado um banco de dados que torna possível o armazenamento dos dados clínicos de cada paciente e, vinculadas a esses dados, suas respectivas imagens digitalizadas, com o propósito de ensino e pesquisa. Os elementos que compõem o banco de dados foram determinados por meio de pesquisa feita com os professores do Departamento de Radiologia da Universidade Federal do Rio de Janeiro. Conseguiu-se elaborar um sistema que contém dados e imagens, de baixo custo e de fácil manipulação por parte dos usuários.

The high-speed induction motor: calculating the effects of solid-rotor material on machine characteristics

A method for the analysis of high-speed solid-rotor induction motors in presented. The analysis is based on a new combination of the three dimensional linear method and the transfer matrix method. Both saturation and finite length effects are taken into account. The active region of the solid rotor is divided into saturated and unsaturated parts. The time dependence is assumed to be sinusoidal and phasor quantities are used in the solution. The method is applied to the calculation of smooth solid rotors manufactured of different materials. Six rotor materials are tested: three construction steels, pure iron, a cobaltiron alloy and an aluminium alloy. The results obtained by the method agree fairly well with the measurement quantities.

Electronic transport in low temperature nanocrystalline silicon thin-film transistors obtained by Hot-Wire CVD

Hydrogenated nanocrystalline silicon (nc-Si:H) obtained by hot-wire chemical vapour deposition (HWCVD) at low substrate temperature (150 °C) has been incorporated as the active layer in bottom-gate thin-film transistors (TFTs). These devices were electrically characterised by measuring in vacuum the output and transfer characteristics for different temperatures. The field-effect mobility showed a thermally activated behaviour which could be attributed to carrier trapping at the band tails, as in hydrogenated amorphous silicon (a-Si:H), and potential barriers for the electronic transport. Trapped charge at the interfaces of the columns, which are typical in nc-Si:H, would account for these barriers. By using the Levinson technique, the quality of the material at the column boundaries could be studied. Finally, these results were interpreted according to the particular microstructure of nc-Si:H.

Vanhusten hyvä kotona asuminen: tutkimusta kuntatuottavuudesta, älykodeista ja apuvälinepalveluprosesseista

The purpose of the research was to investigate operational processes related to home care of the elderly as well as use of assistive devices in smart home environments, and operational processes that are generally related to use of assistive devices – from the point of view of productivity improvement. The themes were looked into from the points of view of both the elderly and care personnel. In addition, perspectives of near relatives of the elderly, of the larger service system as well as of companies that provided assistive devices to the smart homes were taken into consideration. In the study of home care processes, 32 customer interviews and 17 employee interviews were carried out. This report contains a summary that is based on a separate report of the home care study. The study of home care was conducted in 2006. The use of technological and mechanical assistive devices and the related operational processes were investigated with the help of the smart home pilot in 2007–2008. The study is described in this report. The smart home pilot was implemented in four different housing service units for elderly people at Lahti, Nastola and Hollola. They were in use during short-term housing periods related to, for instance, end of hospitalisation, holidays of caring relatives and assessment of living and housing conditions. More than 60 different assistive devices and technologies were brought to the smart homes. During the pilot period, experiences of customers and personnel as well as processes related to the use of assistive devices were investigated. The research material consisted of 20 survey questionnaires of personnel and customers, four interviews with customers, five interviews with personnel, feedback survey responses from 14 companies, and other data that were collected, for instance, in orientation events. The research results highlighted the need for tailored services based on an elderly person’s needs and wishes, while taking advantage of innovative and technological solutions. As in the earlier home care study, also assistive device-related operational processes were looked into with the help of concepts of ‘resource focus’, ‘lost motion’ and ‘intermediate landing’. The following were identified as central operational processes in assistive device-related services (regardless of the service provider): (1) acquisition process of technologies and assistive devices as well as of rearrangement and rebuilding works in the home, (2) introduction and orientation process (of the elderly, their relatives and care personnel), (3) information and communication process, and (4) service and monitoring process. In addition, the research focused on design and desirability of assistive devices as well as their costs, such as opportunity costs. The process-based points of view gave new knowledge that may be used in the future to develop service processes and clarify their ownership so that separately managed cross-functional processes could be built with participants from different sectors to operate alongside organisations of elderly care. Development of functionality of assistive device-related services is a societally significant issue.

Search Interfaces on the Web: Querying and Characterizing

Current-day web search engines (e.g., Google) do not crawl and index a significant portion of theWeb and, hence, web users relying on search engines only are unable to discover and access a large amount of information from the non-indexable part of the Web. Specifically, dynamic pages generated based on parameters provided by a user via web search forms (or search interfaces) are not indexed by search engines and cannot be found in searchers’ results. Such search interfaces provide web users with an online access to myriads of databases on the Web. In order to obtain some information from a web database of interest, a user issues his/her query by specifying query terms in a search form and receives the query results, a set of dynamic pages that embed required information from a database. At the same time, issuing a query via an arbitrary search interface is an extremely complex task for any kind of automatic agents including web crawlers, which, at least up to the present day, do not even attempt to pass through web forms on a large scale. In this thesis, our primary and key object of study is a huge portion of the Web (hereafter referred as the deep Web) hidden behind web search interfaces. We concentrate on three classes of problems around the deep Web: characterization of deep Web, finding and classifying deep web resources, and querying web databases. Characterizing deep Web: Though the term deep Web was coined in 2000, which is sufficiently long ago for any web-related concept/technology, we still do not know many important characteristics of the deep Web. Another matter of concern is that surveys of the deep Web existing so far are predominantly based on study of deep web sites in English. One can then expect that findings from these surveys may be biased, especially owing to a steady increase in non-English web content. In this way, surveying of national segments of the deep Web is of interest not only to national communities but to the whole web community as well. In this thesis, we propose two new methods for estimating the main parameters of deep Web. We use the suggested methods to estimate the scale of one specific national segment of the Web and report our findings. We also build and make publicly available a dataset describing more than 200 web databases from the national segment of the Web. Finding deep web resources: The deep Web has been growing at a very fast pace. It has been estimated that there are hundred thousands of deep web sites. Due to the huge volume of information in the deep Web, there has been a significant interest to approaches that allow users and computer applications to leverage this information. Most approaches assumed that search interfaces to web databases of interest are already discovered and known to query systems. However, such assumptions do not hold true mostly because of the large scale of the deep Web – indeed, for any given domain of interest there are too many web databases with relevant content. Thus, the ability to locate search interfaces to web databases becomes a key requirement for any application accessing the deep Web. In this thesis, we describe the architecture of the I-Crawler, a system for finding and classifying search interfaces. Specifically, the I-Crawler is intentionally designed to be used in deepWeb characterization studies and for constructing directories of deep web resources. Unlike almost all other approaches to the deep Web existing so far, the I-Crawler is able to recognize and analyze JavaScript-rich and non-HTML searchable forms. Querying web databases: Retrieving information by filling out web search forms is a typical task for a web user. This is all the more so as interfaces of conventional search engines are also web forms. At present, a user needs to manually provide input values to search interfaces and then extract required data from the pages with results. The manual filling out forms is not feasible and cumbersome in cases of complex queries but such kind of queries are essential for many web searches especially in the area of e-commerce. In this way, the automation of querying and retrieving data behind search interfaces is desirable and essential for such tasks as building domain-independent deep web crawlers and automated web agents, searching for domain-specific information (vertical search engines), and for extraction and integration of information from various deep web resources. We present a data model for representing search interfaces and discuss techniques for extracting field labels, client-side scripts and structured data from HTML pages. We also describe a representation of result pages and discuss how to extract and store results of form queries. Besides, we present a user-friendly and expressive form query language that allows one to retrieve information behind search interfaces and extract useful data from the result pages based on specified conditions. We implement a prototype system for querying web databases and describe its architecture and components design.

Tomografia computadorizada da coluna lombar após artrodese com emprego de material metálico: avaliação da qualidade da imagem para diferentes algoritmos matemáticos

OBJETIVO: Selecionar os melhores algoritmos para o exame de coluna lombar na avaliação de artrodese com material metálico. MATERIAIS E MÉTODOS: Utilizou-se um equipamento de tomografia computadorizada de 16 fileiras de detectores. Imagens de dez pacientes foram reconstruídas com filtros 20, 40, 60 e 80 e realizadas reformatações em três dimensões e multiplanares com espessuras de 2 mm e 4 mm. Um total de 320 imagens foi avaliado por três experientes radiologistas, que deram notas de 1 a 5 (1 = não-aceitável; 2 = abaixo dos padrões; 3 = aceitável; 4 = acima da média; 5 = excelente). Além disso, foram realizadas medidas de ruído para correlação com o tipo de filtro utilizado. RESULTADOS: As médias do valor de ruído para reconstrução com 2 mm e filtros 20, 40, 60 e 80 foram de 24,7 ± 4,3; 35,5 ± 4,2; 106,0 ± 18,5 e 145,9 ± 26,9, respectivamente, e para 4 mm foram de 18,1 ± 2,4; 25,1 ± 4,6; 76,7 ± 17,2 e 106,6 ± 23,4. CONCLUSÃO: As imagens coloridas em três dimensões são mais bem visualizadas com filtro 20, entretanto, nas imagens em tons de cinza um filtro intermediário de 40 ou 60 pode ser útil para demonstrar os parafusos com maior detalhe. Para reconstruções multiplanares com espessura de 2 mm o filtro 40 é mais bem aceito, e para uma espessura de 4 mm um filtro 60 apresentou melhor qualidade.