La investigación en antropología física. Una mirada al futuro

Desde su creación en 1976 la Sociedad Española de Antropología Física (SEAF) viene celebrando sus congresos bienales de forma ininterrumpida en distintas ciudades españolas. Estos encuentros, destinados a la discusión de los avances y resultados de las investigaciones bioantropológicas, suponen un foro de debate científico en el que participan investigadores de diversas áreas interesados en los estudios de Antropología Física, promoviendo la interacción entre especialistas e investigadores en formación. Asimismo, y dado el interés que esta disciplina despierta en la sociedad en general, la celebración de los Congresos de la SEAF permite mostrar las novedades acontecidas en el ámbito de la ciencia bioantropológica, facilitando la difusión del conocimiento más allá de la esfera académica. En este marco de reuniones científicas, los profesores del área de Antropología Física de la Facultad de Ciencia y Tecnología de la Universidad del País Vasco-Euskal Herriko Unibertsitatea (UPV/EHU) han sido los encargados de organizar el XVIII Congreso de la SEAF, celebrado en Bilbao durante los días 19 a 21 de junio de 2013. Este libro recoge las ponencias y principales comunicaciones presentadas en el XVIII Congreso, seleccionadas para su publicación y agrupadas en diferentes bloques temáticos que recogen algunas de los conocimientos actuales de la investigación bioantropológica: Ecología Humana, Biología Esquelética y Antropología Forense Paleoantropología y Primatología, y Diversidad Genética Humana. Se ha pretendido mostrar algunas de las cuestiones más relevantes actualmente y la proyección futura de la investigación en Antropología biológica, encaminada tanto al cuestionamiento de paradigmas (como la preponderancia de África en la evolución humana o la existencia de una única especie humana a partir del Pleistoceno Superior, entre otros), como a la comprensión de la relación fenotipo-genotipo, entre otras cuestiones de gran importancia para la reconstrucción de la historia evolutiva de nuestra especie. Sirvan las ponencias invitadas como ejemplo del nuevo enfoque de algunas áreas de la investigación en Antropología.

Matemáticas y su didáctica I. Grado de maestro en Educación Primaria

El presente trabajo trata de proporcionar, a los alumnos del Título de Grado de Maestro de Educación Primaria, un instrumento con el que poder completar los contenidos que se exigen en la asignatura de Matemáticas y su Didáctica I. Es ésta una asignatura cuatrimestral, de 6 créditos ECTS, situada en el primer año de los estudios de Grado, que tendrá su continuidad en la asignatura de Matemáticas y su Didáctica II, del tercer año y asignada al Área de Conocimiento de Didáctica de la Matemática. Comprende tres grandes apartados. En el primero, “aspectos generales de las matemáticas”, se hará un recorrido histórico por algunos de los tópicos más usuales de las matemáticas escolares, así como una introducción al razonamiento matemático y a la teoría de conjuntos, que aunque ha perdido la importancia que tuvo en el tercer cuarto del siglo XX en la enseñanza de las matemáticas en los niveles elementales, sigue siendo un poderoso y útil instrumento pedagógico de representación de problemas. Se hace, además, un recorrido histórico por lo que ha sido la enseñanza de las Matemáticas y se termina con una recopilación de la legislación educativa en vigor. El segundo apartado lleva el título general de “resolución de problemas”, algo que, aunque desde su nacimiento ha sido inherente al hacer matemático, sólo en los últimos tiempos ha aparecido explícitamente, en las disposiciones oficiales para la enseñanza elemental, siendo incluso uno de los bloques de contenido, para la educación primaria, en la Comunidad Autónoma Vasca. El último y tercer bloque trata de dar una visión general de lo que hay, actualmente, en ese mundo de las nuevas tecnologías en lo que toca a la enseñanza de las Matemáticas. Esperamos que este texto, experimentado, modificado y mejorado durante los cursos 2010-2011 y 2011-2012, sirva de ayuda a los alumnos de Magisterio y despierten en ellos el interés por esta ciencia tan antigua y, al mismo tiempo, tan actual y necesaria.

Panorámica de la práctica física y deportiva en Gipuzkoa

A lo largo de la historia, la actividad física ha tenido una importante presencia en el comportamiento diario de los seres humanos, siendo diferentes las funciones, interpretaciones y motivaciones de dicha práctica, pero siempre, asociadas a un carácter existencial. Este concepto ha ido evolucionando a lo largo del tiempo, identificándolo en sus inicios con una actividad condicionada y vinculada de forma significativa a la cultura propia de los pueblos que lo practicaban, hasta convertirse en un fenómeno de masas, con implicaciones sociológicas y económicas difíciles de explicar. En este sentido, se ha podido constatar que, durante los últimos años, ha existido un especial interés por parte de los organismos públicos para conocer y valorar la práctica deportiva en Gipuzkoa.

Revisiones en biología celular y molecular

Desde la perspectiva de este año 2010, el presente libro podría ser considerado como una segunda etapa del camino emprendido por los editores en el bienio 1999-2000. Por aquel entonces propusimos a los alumnos de nuestro curso de doctorado “Bases y mecanismos de la diferenciación”, un enfoque por aquel entonces novedoso a la hora de desarrollar la docencia de tercer ciclo. La novedad propuesta a los alumnos consistió en la adaptación de los tradicionales trabajos de los cursos de doctorado a la redacción de un capítulo de libro, destinado a cubrir el vacío que existía en el mercado editorial por aquella época en cuanto a libros de diferenciación se refería. Pero con este enfoque de la docencia teníamos previsto algo más complejo. No pretendíamos tan solo implicar a los alumnos en profundizar en un tema de su interés relacionado con la diferenciación, sino también ayudarles y guiarles en la redacción de un documento científico con los conocimientos adquiridos, iniciándoles en las búsquedas bibliográficas, la selección de textos, la corrección de estilo, etc. En definitiva, implicarles de alguna manera más activa en su docencia, y que su papel no fuese meramente pasivo de oyentes de conferencias. En aquellos momentos se empezaba a hablar del espíritu reformador de Bolonia, y quisimos experimentar algunos de los aspectos que en él se propugnaban con un número reducido de alumnos muy bien preparados.

Txina da. Exposición colectiva

[ES]La revolución económica y social que supone el mundo globalizado tiene también una dimensión cultural. Y en el espacio de eso que se está denominando “países emergentes” la cultura representa un hervidero de ideas, experiencias y propuestas estéticas. Hoy no es posible ignorar, dentro del panorama artístico, lo que ocurre en esos países. Se trata, muy al contrario, de un foco de interés que conviene atender, y donde nuestros artistas pueden encontrar un nuevo territorio, físico y mental, para desarrollar su particular investigación estética. La presente exposición es una buena muestra del impacto que ha supuesto este proyecto. Y es también, al mismo tiempo, una oportunidad para que nosotros y nosotras podamos disfrutar de las propuestas creativas alumbradas en las cuatro ediciones del programa.

Polímeros de Coordinación con Centros Metálicos en Entornos de Coordinación Variables: Posibles Aplicaciones.

Presentación de power point. Comunicación oral presentada en el 1er Simposium sobre Propiedades y Aplicaciones de MOFs y COFs, celebrado en Granada en abril de 2015

Educación intercultural, la óptica del Norte

Jornada “Educación Intercultural, La Óptica Del Norte. Organiza: Mundubat, Bilbao, 22 de noviembre de 2003

Systematic liquidity: commonality and inter-temporal variation in the Portuguese stock market

[EN] The aim of this paper is to study systematic liquidity at the Euronext Lisbon Stock Exchange. The motivation for this research is provided by the growing interest in financial literature about stock liquidity and the implications of commonality in liquidity for asset pricing since it could represent a source of non-diversifiable risk. Namely, it is analysed whether there exist common factors that drive the variation in individual stock liquidity and the causes of the inter-temporal variation of aggregate liquidity. Monthly data for the period between January 1988 and December 2011 is used to compute some of the most used proxies for liquidity: bid-ask spreads, turnover rate, trading volume, proportion of zero returns and the illiquidity ratio. Following Chordia et al. (2000) methodology, some evidence of commonality in liquidity is found in the Portuguese stock market when the proportion of zero returns is used as a measure of liquidity. In relation to the factors that drive the inter-temporal variation of the Portuguese stock market liquidity, the results obtained within a VAR framework suggest that changes in real economy activity, monetary policy (proxied by changes in monetary aggregate M1) and stock market returns play an important role as determinants of commonality in liquidity.

Spin-related phenomena in magnetic and spin-orbit couppled bose-einstein condensates

129 p.

Eficacia de la aplicación de la terapia Mindfulness para resucir los síntomas de ansiedad en personas adultas de Atención Primaria

En la última década Mindfulness ha despertado gran interés como tratamiento terapéutico en la salud psicológica. Está inmerso en lo que ya se denominan Terapias de Tercera Generación, donde la aceptación es el concepto en cuál se centra. Existen varios programas en los que se aplica esta terapia y se han realizado estudios para numerosas aplicaciones clínicas, dando evidencia científica al respecto. El objetivo de esta revisión narrativa es la de conocer la eficacia de la aplicación de la terapia Mindfulness para reducir los síntomas de ansiedad en personas adultas de Atención Primaria. Para ello, se revisan los fundamentos teóricos y mecanismos de acción de Mindfulness, y de qué manera actúa en los trastornos de ansiedad. Dentro de este marco, se expone en la discusión la aplicación de la terapia en Atención primaria y la posibilidad de ser una herramienta para el profesional de Enfermería. Finalmente, se concluye que Mindfulness tiene un efecto moderado para reducir los niveles de ansiedad, aunque sin gran diferencia respecto a las Terapias Cognitivo Conductuales utilizadas hasta el momento. Se observa una necesidad de mayor evidencia científica que respalde la idoneidad de la aplicación de Mindfulness en personas adultas de Atención Primaria para reducir los niveles de ansiedad. Y siendo esta terapia una herramienta idónea para ofrecer por parte del personal de Enfermería, existen pocos estudios en los que Enfermer@s sean los que aplican Mindfulness

Centro de estudios sobre ciudades fortificadas y reconstrucción del área de "la place de l´Abreuvoir" en Navarrenx

Sobre una estructura urbana clara de bastida y en el límite de la zona construida con las murallas, se plantea a un lado de la calle este-oeste, que conduce al Hotel de Ville, la construcción de un edificio museo que guarda las alineaciones actuales de unas construcciones-almacenes de poco interés urbano. Al otro lado de la calle queda el ámbito irregular que se prolonga hasta la Place de L’Abreuvoir y tiene como límite las murallas. Simétricamente al Museo se plantea un pabellón-mercado que configura la nueva entrada a la calle este-oeste y a la vez guarda relación con un pequeño pabellón que cierra visualmente la Plaza de L’Abreuvoir del paseo perimetral de las murallas. El edificio Museo de forma trapezoidal se estructura en tres crujías, que organiza en su parte central los espacios más representativos y de comunicación y en los laterales los usos más funcionales. Por último se ha trabajado con la forma, manipulándola para lograr una respuesta clara y congruente con los usos planteados y el carácter arquitectónico del lugar.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Charge and spin transport in graphene devices

170 p.

Proceso catalítico de transformación de dimetil éter en olefinas (DTO)

325 p.

Implicación de Anexina A5 en la progresión maligna del melanoma humano. Valor pronóstico

172 p.