Internal standard versus external standard calibration: an uncertainty case study of a liquid chromatography analysis

Traditionally, in the cigarettes industry, the determination of ammonium ion in the mainstream smoke is performed by ion chromatography. This work studies this determination and compares the results of this technique with the use of external and internal standard calibration. A reference cigarette sample presented measurement uncertainty of 2.0 μg/cigarette and 1.5 μg/cigarette, with external and internal standard, respectively. It is observed that the greatest source of uncertainty is the bias correction factor and that it is even more significant when using external standard, confirming thus the importance of internal standardization for this correction.

Monialustaiset avoimen lähdekoodin ikkunointikirjastot

Tämän tutkimuksen tavoitteena oli löytää vastauksia siihen, mikä on tärkeimpien avoimen lähdekoodin kirjastojen toteutuksen tämän hetkinen taso. Työssä tutkittiin WxWidgetsin, GTK+:n ja Qt:n toteutuksen tasoa käytämällä hyväksi McCaben, Henry&Kafuran ja Chidamberin & Kemererin esittelemiä staattisia menetelmiä. Lisäksi ikkunointikirjastojen lähdekoodin käännetty koko mitattiin eri käyttöjärjestelmissä. Tutkimuksessa esitellään valittujen kirjastojen arkkitehtuuri ja vertaillaan esiteltävien kirjastojen arkkitehtuurisia ratkaisuja toisiinsa. Tämän jälkeen arvioidaan staattisten menetelmien tuottamien tuloksien merkitystä kahdesta näkökulmasta: mitä tulokset kertovat kirjastoista kun niitä verrataan toisiinsa ja mitä silloin kun niitä verrataan kyseisen kirjaston ja muiden kirjastojen arkkitehtuurisiin ratkaisuihin. Tutkimuksessa havaittiin Qt:n sisältävän kaikkein vähiten kirjaston ulkopuolisia riippuvuuksia. Tämän lisäksi sen huomattiin sisältävän muista kirjastoista puuttuvia ominaisuuksia. Osittain edellämainitusta syystä johtuen Qt:n ongelmakohdaksi havaittiin joidenkin sen osien suuri monimutkaisuus ja tästä seuraava mahdollinen vaikeasti ylläpidettävä lähdekoodi. GTK+:n lähdekoodi sisältää muita kirjastoja vähemmän sisäisiä riippuvuuksia samaan kirjastoon, on korkeammalla abstraktiotasolla ja kirjaston osat ovat siirrettävissä ja erotettavissa toisistaan. Joissakin kohdissa GTK+:n ja etenkin sen C++-rajapinnan GTKmm:n lähdekoodi on kuitenkin tarpeettoman monimutkaista. WxWidgetsin toteutuksen havaittiin Qt:n tavoin olevan hyvin itsenäinen kokonaisuus, WxWidgetsin lähdekoodin monimutkaisuus on useimmiten jotakin GTK+:n ja Qt:n väliltä. WxWidgets on Qt:a vähemmän itsenäinen mutta kuitenkin itsenäisempi kuin GTK+. Kuten muutkin kirjastot myös wxWidgetsillä on omat kohtansa, joissa sen lähdekoodi on tarpeettoman monimutkaista.

Influence of internal seedborne Fusarium semitectum on cotton seedlings

Fusarium semitectum was found to be the major seed colonizing fungus in the commercial acid delinted cotton (Gossypium hirsutum) seed lots. There was no correlation, however, between its incidence and seedling emergence and disease symptoms on the emerged seedlings in autoclaved sand. Inoculation technique simulating internally seedborne nature of the fungus showed that the observed non-correlation might be related to the threshold level of seed coat colonization. The internally seedborne inoculum besides reducing seedling emergence, incited an array of symptoms on the emerged seedlings, which ranged from negative geotropism, leaf tearing, collar rot leading to dry root rot and seedling mortality. The dry root rot continued to develop on the plants surviving the seedling phase. The collar rot symptoms can be confused with those caused by Rhizoctonia solani.

CFD Simulation of Two-phase and Three-phase Flows in Internal-loop Airlift

Airlift reactors are pneumatically agitated reactors that have been widely used in chemical, petrochemical, and bioprocess industries, such as fermentation and wastewater treatment. Computational Fluid Dynamics (CFD) has become more popular approach for design, scale-up and performance evaluation of such reactors. In the present work numerical simulations for internal-loop airlift reactors were performed using the transient Eulerian model with CFD package, ANSYS Fluent 12.1. The turbulence in the liquid phase is described using κ- ε the model. Global hydrodynamic parameters like gas holdup, gas velocity and liquid velocity have been investigated for a range of superficial gas velocities, both with 2D and 3D simulations. Moreover, the study of geometry and scale influence on the reactor have been considered. The results suggest that both, geometry and scale have significant effects on the hydrodynamic parameters, which may have substantial effects on the reactor performance. Grid refinement and time-step size effect have been discussed. Numerical calculations with gas-liquid-solid three-phase flow system have been carried out to investigate the effect of solid loading, solid particle size and solid density on the hydrodynamic characteristics of internal loop airlift reactor with different superficial gas velocities. It was observed that averaged gas holdup is significantly decreased with increasing slurry concentration. Simulations show that the riser gas holdup decreases with increase in solid particle diameter. In addition, it was found that the averaged solid holdup increases in the riser section with the increase of solid density. These produced results reveal that CFD have excellent potential to simulate two-phase and three-phase flow system.

Suunnittelukapasiteettien seurantamallin kehittäminen

The first main objective of this study was to develop a planning capacity management model for a chocolate and confectionary company in Finland. The second objective was to analyze how capacity updates would affect cost accounting practices. In addition, a creation of an update and maintenance process of planning capacities was determined as a sub-objective of developing the capacity management model. The thesis was started with analyzing the needs, requirements and constraints of the capacity management model and model’s connection with cost accounting. This was done by interviewing key officials like production planners, managers and controllers. A thorough literature review was also done at an early phase. Furthermore, internal systems and software architecture got to be acquainted with. The model was constructed as an Excel-based platform which will get its input data from Enterprise Resource Planning system and Production Performance Measurement system. The main purpose of the planning capacity management model is to make sure that the production planners can utilize more precise parameters but it also offers tools for the production managers to assess production performance and effectiveness at the product level. In addition to production planning, planning capacities are also tightly involved with cost accounting as many direct and indirect costs are allocated to the products utilizing planning capacities. For this reason, the linkage between product costing and capacity is also diversely examined in the thesis. Development suggestions conclude the report by giving some guidelines for more precise and consistent production planning and cost accounting between the factories.

Enterprise architecture – the foundation for a strategy

This artcle describes work done with enterprise architecture of the National Digital Library. The National Digital Library is an initiative of the Finnish Ministry of Education and Culture. Its purpose is to promote the availability of the digital information resources of archives, libraries and museums, and to develope the long-term preservation of digital cultural heritage materials. Enterprise architectures are a tool for strategic management and planning. An enterprise architecture also functions as an aid at a more practical level. It shows, for example, what kind of changes and improvements may be made in one system without overlap or conflict with other systems.

Paperikoneen toimituskonseptin muutos strategisena kilpailutekijänä

2000-luvulla paperikoneiden kustannuskilpailukykyä on parannettu jatkuvasti, mutta se ei ole ollut riittävää. Tarve muutoksiin havaitaan kilpailukyvyn puutteena vuosina 2007–2008. Eräänä hankkeena on paperikoneen suunnitteleminen ja valmistaminen kopiokonseptikoneena, jossa toimitusmoduulina on paperikone perälaatikolta rullaimelle. Moduulikonsepti on toimintatapa, jossa paperikone tuotteistetaan rakenneryhmien ja laitteiden osalta tietyn ominaisuuden mukaan koko paperikonelinjassa. Paperikone rakentuisi sovituista moduulipalikoista. Moduulikonseptitavassa paperikone suunnitellaan ja toteutetaan aina malliaineiston pohjalta kaikissa rakenneryhmissä. Työssä on tarkoitus vertailla kopiokonsepti- ja moduulikonseptimallia. Kaksi tutkimustyön pääkysymystä käsittelee ulkoista kilpailukykyä ja yrityksen sisäistä tehokkuutta valmistaa paperi- ja kartonkikoneita kopiokonsepti- tai moduulikonseptimallilla näkökulmana pitkäaikainen kilpailuetu. Tutkimustulokset selvitettiin Kamenskyn kehittämällä yrityksen strategisen arkkitehtuurin mallilla. Sisäiset ja ulkoiset toiminnot analysoitiin. Ulkoisen ja sisäisen analyysin pohjalta muodostettiin yhdistetty näkemys, synteesianalyysi, joka vastaa työn tavoitteisiin, kahteen pääkysymykseen sekä alakysymyksiin. Kopiokonsepti ei ole ratkaisu pitkäaikaiseen kilpailukykyyn, koska jokainen paperilaji ja konekoko tarvitsevat oman kopiomallinsa. Nykyiset henkilöresurssit eivät tule riittämään näihin koneisiin tarvittavien dokumenttien luomiseen ja ylläpitoon. Suunnittelun perustehtävä muuttuisi projektisuunnittelusta kopiomallien suunnitteluksi. Moduulikonseptilla saavutetaan kaikki ne edut, joita kopiokonseptilla on tavoiteltu, mukaan lukien nimikkeiden uudelleenkäyttö. Moduulikonseptilla voidaan toteuttaa kaikki nykyiset ja tulevat paperikoneet ja paperilajit. Vuosittain saatavissa oleva määrä on 1,5–2,5 kopiokonseptipaperikonetta. Moduulikonseptimallia on saatavissa sama määrä.

Design and development of the architecture of an agricultural mobile robot

Parameters such as tolerance, scale and agility utilized in data sampling for using in Precision Agriculture required an expressive number of researches and development of techniques and instruments for automation. It is highlighted the employment of methodologies in remote sensing used in coupled to a Geographic Information System (GIS), adapted or developed for agricultural use. Aiming this, the application of Agricultural Mobile Robots is a strong tendency, mainly in the European Union, the USA and Japan. In Brazil, researches are necessary for the development of robotics platforms, serving as a basis for semi-autonomous and autonomous navigation systems. The aim of this work is to describe the project of an experimental platform for data acquisition in field for the study of the spatial variability and development of agricultural robotics technologies to operate in agricultural environments. The proposal is based on a systematization of scientific work to choose the design parameters utilized for the construction of the model. The kinematic study of the mechanical structure was made by the virtual prototyping process, based on modeling and simulating of the tension applied in frame, using the.

Internal ambience of bee colonies submitted to strengthening management by adding broods

This study aimed to investigate the ideal brood area to be introduced for strengthening Apis mellifera colonies, considering variations in the hive's internal ambience. Therefore, eight colonies were equipped with data loggers for recording variations in temperature and humidity inside the hives. Then, these colonies were split in four treatments involving the swapping of four, three, two and one brood comb between strong and weak colonies. Growth in the amount of brood and food stores to the four colony strengthening treatments was assessed counting the comb cells to record changes in the brood and food area. The colonies tended to restore their normal thermoregulation within four hours after they had been manipulated and the hive cover had been closed, which quickly increased brood area in the receiving colonies. Results showed that adding up to three brood combs constitute an important alternative for strengthening Apis mellifera colonies because it did not interfere with nest thermoregulation, speeded up population growth in weak colonies and did not affect the development of strong colonies.

Internal ambience of beehives Apis mellifera with different colors and roofing materials in the sub middle of the São Francisco Valley

ABSTRACTThe current study aimed to evaluate the influence of three colors and two types of roofing materials under the internal temperature of bee colonies Apis mellifera. The experiment was conducted at the Agricultural Sciences Campus at the Federal University of Sao Francisco Valley located in Petrolina-PE, in November and December 2013, using 24 colonies housed in Langstroth hives. The experiment was a completely randomized factorial design (3x2) with three colors of box (blue, white, and traditional) and two types of cover (with and without the use of plaster) with six treatments and four replications. The internal temperature dates of the colonies were hourly recorded, during 24 hours, and surface temperatures were hourly recorded between 08h00 and 17h00. The highest values for surface and internal temperature were registered in the blue painted boxes without the use of plasterboard, and the blue painted boxes covered with plasterboard respectively. However, the lowest values ​​were found in the white painted hives and hives that have not received the plasterboard. It is recommended to paint boxes with bright colors, and the use of plasterboard had no effect in reducing the internal temperature.

Usable Privacy Preservation in Mobile Electronic Personality

Personalised ubiquitous services have rapidly proliferated due technological advancements in sensing, ubiquitous and mobile computing. Evolving societal trends, business and the economic potential of Personal Information (PI) have overlapped the service niches. At the same time, the societal thirst for more personalised services has increased and are met by soliciting deeper and more privacy invasive PI from customers. Consequentially, reinforcing traditional privacy challenges and unearthed new risks that render classical safeguards ine ective. The absence of solutions to criticise personalised ubiquitous services from privacy perspectives, aggravates the situation. This thesis presents a solution permitting users' PI, stored in their mobile terminals to be disclosed to services in privacy preserving manner for personalisation needs. The approach termed, Mobile Electronic Personality Version 2 (ME2.0), is compared to alternative mechanisms. Within ME2.0, PI handling vulnerabilities of ubiquitous services are identi ed and sensitised on their practices and privacy implications. Vulnerability where PI may leak through covert solicits, excessive acquisitions and legitimate data re-purposing to erode users privacy are also considered. In this thesis, the design, components, internal structures, architectures, scenarios and evaluations of ME2.0 are detailed. The design addresses implications and challenges leveraged by mobile terminals. ME2.0 components and internal structures discusses the functions related to how PI pieces are stored and handled by terminals and services. The architecture focusses on di erent components and their exchanges with services. Scenarios where ME2.0 is used are presented from di erent environment views, before evaluating for performance, privacy and usability.

On Innovative Search: the use of internal and external sources of innovation among Finnish innovators

This dissertation explores the use of internal and external sources of knowledge in modern innovation processes. It builds on a framework that combines theories such as a behavioural theory of the firm, the evolutionary theory of economic change, and modern approaches to strategic management. It follows the recent increase in innovation research focusing on the firm-level examination of innovative activities instead of traditional industry-level determinants. The innovation process is seen as a problem- and slack- driven search process, which can take several directions in terms of organizational boundaries in the pursuit of new knowledge and other resources. It thus draws on recent models of technological change, according to which firms nowadays should build their innovative activities on both internal and external sources of innovation rather than relying solely on internal resources. Four different research questions are addressed, all of which are empirically investigated via a rich dataset covering Finnish innovators collected by Statistics Finland. Firstly, the study examines how the nature of problems shapes the direction of any search for new knowledge. In general it demonstrates that the nature of the problem does affect the direction of the search, although under resource constraints firms tend to use external rather than internal sources of knowledge. At the same time, it shows that those firms that are constrained in terms of finance seem to search both internally and externally. Secondly, the dissertation investigates the relationships between different kinds of internal and external sources of knowledge in an attempt to find out where firms should direct their search in order to exploit the potential of a distributed innovation process. The concept of complementarities is applied in this context. The third research question concerns how the use of external knowledge sources – openness to external knowledge – influences the financial performance of firms. Given the many advantages of openness presented in the current literature, the focus is on how it shapes profitability. The results reveal a curvilinear relationship between profitability and openness (taking an inverted U-shape), the implication being that it pays to be open up to a certain point, but being too open to external sources may be detrimental to financial performance. Finally, the dissertation addresses some challenges in CISbased innovation research that have received relatively little attention in prior studies. The general aim is to underline the fact that comprehensive understanding of the complex process of technological change requires the constant development of methodological approaches (in terms of data and measures, for example). All the empirical analyses included in the dissertation are based on the Finnish CIS (Finnish Innovation Survey 1998-2000).

Internal quality control indicators of cervical cytopathology exams performed in laboratories monitored by the External Quality Control Laboratory

PURPOSE: To evaluate the impact of continued education provided by an external quality control laboratory on the indicators of internal quality control of cytopathology exams.METHODS: The internal quality assurance indicators for cytopathology exams from 12 laboratories monitored by the External Quality Control Laboratory were evaluated. Overall, 185,194 exams were included, 98,133 of which referred to the period preceding implementation of a continued education program, while 87,061 referred to the period following this intervention. Data were obtained from the Cervical Cancer Database of the Brazilian National Health Service.RESULTS: Following implementation of the continued education program, the positivity index (PI) remained within recommended limits in four laboratories. In another four laboratories, the PI progressed from below the limits to within the recommended standards. In one laboratory, the PI remained low, in two laboratories, it remained very low, and in one, it increased from very low to low. The percentage of exams compatible with a high-grade squamous intraepithelial lesion (HSIL) remained within the recommended limits in five laboratories, while in three laboratories it progressed from below the recommended levels to >0.4% of the total number of satisfactory exams, and in four laboratories it remained below the standard limit. Both the percentage of atypical squamous cells of undetermined significance (ASC-US) in relation to abnormal exams, and the ratio between ASC-US and intraepithelial lesions remained within recommended levels in all the laboratories investigated.CONCLUSION: An improvement was found in the indicators represented by the positivity index and the percentage of exams compatible with a high-grade squamous intraepithelial lesion, showing that the role played by the external quality control laboratory in providing continued education contributed towards improving laboratory staff skills in detecting cervical cancer precursor lesions.

From network pictures to network insight in solution business – the role of internal communication

Operating in business-to-business markets requires an in-depth understanding on business networks. Actions and reactions made to compete in markets are fundamentally based on managers‘ subjective perceptions of the network. However, an amalgamation of these individual perceptions, termed a network picture, to a common company level shared understanding on that network, known as network insight, is found to be a substantial challenge for companies. A company‘s capability to enhance common network insight is even argued to lead competitive advantage. Especially companies with value creating logics that require wide comprehension of and collaborating in networks, such as solution business, are necessitated to develop advanced network insight. According to the extant literature, dispersed pieces of atomized network pictures can be unified to a common network insight through a process of amalgamation that comprises barriers/drivers of multilateral exchange, manifold rationality, and recursive time. However, the extant body of literature appears to lack an understanding on the role of internal communication in the development of network insight. Nonetheless, the extant understanding on the amalgamation process indicates that internal communication plays a substantial role in the development of company level network insight. The purpose of the present thesis is to enhance understanding on internal communication in the amalgamation of network pictures to develop network insight in the solution business setting, which was chosen to represent business-to-business value creating logic that emphasizes the capability to understand and utilize networks. Thus, in solution business the role of succeeding in the amalgamation process is expected to emphasize. The study combines qualitative and quantitative research by means of various analytical methods including multiple case analysis, simulation, and social network analysis. Approaching the nascent research topic with differing perspectives and means provides a broader insight on the phenomenon. The study provides empirical evidence from Finnish business-to-business companies which operate globally. The empirical data comprise interviews (n=28) with managers of three case companies. In addition the data includes a questionnaire (n=23) collected mainly for the purpose of social network analysis. In addition, the thesis includes a simulation study more specifically achieved by means of agent based modeling. The findings of the thesis shed light on the role of internal communication in the amalgamation process, contributing to the emergent discussion of network insights and thus to the industrial marketing research. In addition, the thesis increases understanding on internal communication in the change process to solution business, a supplier‘s internal communication in its matrix organization structure during a project sales process, key barriers and drivers that influence internal communication in project sales networks, perceived power within industrial project sales, and the revisioning of network pictures. According to the findings, internal communication is found to play a substantial role in the amalgamation process. First, it is suggested that internal communication is a base of multilateral exchange. Second, it is suggested that internal communication intensifies and maintains manifold rationality. Third, internal communication is needed to explicate the usually differing time perspectives of others and thus it is suggested that internal communication has role as the explicator of recursive time. Furthermore, the role of an efficient amalgamation process is found to be emphasized in solutions business as it requires a more advanced network insight for cross-functional collaboration. Finally, the thesis offers several managerial implications for industrial suppliers to enhance the amalgamation process when operating in solution business.