Designing the information architecture of governmental one-stop portals : on the application and analysis of card sorting

The latest paradigm shift in government, termed Transformational Government, puts the citizen in the centre of attention. Including citizens in the design of online one-stop portals can help governmental organisations to become more customer focussed. This study describes the initial efforts of an Australian state government to develop an information architecture to structure the content of their future one-stop portal. Hereby, card sorting exercises have been conducted and analysed, utilising contemporary approaches found in academic and non-scientific literature. This paper describes the findings of the card sorting exercises in this particular case and discusses the suitability of the applied approaches in general. These are distinguished into non-statistical, statistical, and hybrid approaches. Thus, on the one hand, this paper contributes to academia by describing the application of different card sorting approaches and discussing their strengths and weaknesses. On the other hand, this paper contributes to practice by explaining the approach that has been taken by the authors’ research partner in order to develop a customer-focussed governmental one-stop portal. Thus, they provide decision support for practitioners with regard to different analysis methods that can be used to complement recent approaches in Transformational Government.

Systems thinking : an approach for advancing workplace information literacy

As the importance of information literacy has gained increased recognition, so too have academic library professionals intensified their efforts to champion, activate, and advance these capabilities in others. To date, however, little attention has focused on advancing these essential competencies amongst practitioner advocates.This paper helps redress the paucity of professional literature on the topic of workplace information literacy among library professionals.

Adsorption of reactive dye on seawater-neutralised bauxite refinery residue

This investigation has demonstrated the need for thermal treatment of seawater neutralised red mud (SWRM) in order to obtain reasonable adsorption of Reactive Blue dye 19 (RB 19). Thermal treatment results in a greater surface area, which results in an increased adsorption capacity due to more available adsorption sites. Adsorption of RB 19 has been found to be best achieved in acidic conditions using SWNRM400 (heated to 400 �C) with an adsorption capacity of 416.7 mg/g compared to 250.0 mg/g for untreated SWNRM. Kinetic studies indicate a pseudosecond-order reaction mechanism is responsible for the adsorption of RB 19 using SWNRM, which indicates adsorption occurs by electrostatic interactions.

The effect of hydroxyl groups and surface area of hematite derived from annealing goethite for phosphate removal

Synthetic goethite and thermally treated goethite at different temperatures were used to remove phosphate from sewage. The effect of annealing temperature on phosphate removal over time was investigated. X-ray diffraction(XRD), transmission electron microscopy (TEM), N2 adsorption and desorption (BET), and infrared emission spectrum (FT-IES) were utilized to characterize the phase, morphology, specific surface area, pore distribution, and the surface groups of samples. The results show that annealed products of goethite at temperatures over 250 °C are hematite with the similar morphology as the original goethite with different hydroxyl groups and surface area. Increasing temperature causes the decrease in hydroxyl groups, consequential increase in surface area at first and then experiences a decrease (14.8–110.4–12.6 m2/g) and the subsequent formation of nanoscale pores. The variation rate of hydroxyl groups and surface area based on FT-IES and BET, respectively, are used to evaluate the effect of annealing temperature on phosphate removal. By using all of the characterization techniques, it is concluded that the changes of phosphate removal basically result from the total variation rate between hydroxyl groups and surface area.

Effect of reactive bed mineralogy on arsenic retention and permeability of synthetic arsenic-containing acid mine drainage

Successive alkalinity producing systems (SAPSs) are widely used for treating acid mine drainage (AMD) and alleviating clogging commonly occurring in limestone systems due to an amorphous ferric precipitate. In this study, iron dust, bone char, micrite and their admixtures were used to treat arseniccontaining AMD. A particular interest was devoted to arsenic removal performance, mineralogical constraints on arsenic retention ability and permeability variation during column experiment for 140 days. The results showed that the sequence of the arsenic removal capacity was as follows: bone char > micrite > iron dust. The combination of 20% v/v iron dust and 80% v/v bone char/micrite columns can achieve better hydraulic conductivity and phosphorus-retention capacity than single micrite and bone char columns. The addition of iron dust created reductive environment and resulted in the transformation of coating material from colloidal phase to secondary mineral phase, such as green rust and phosphoerrite, which obviously ameliorates hydraulic conductivity of systems. The sequential extraction experiments indicated that the stable fractions of arsenic in columns were enhanced with help of iron dust compared to single bone char and micrite columns. A combination of iron dust and micrite/bone char represented a potential SAPS for treating As-containing AMD.

Bringing skills and general competences back into technological education

In this paper we show that industry-based student training is not limited to work experience; work integrated learning, internship or extended vacation work. It is also about bringing back the lost parts of technological education. We experience the unilateral focus on theoretical knowledge at the expense of skills and general competences as one important challenge in technological education. The lacking facilitation and training of practical skills and general competences in the curricula and programs are identified, but many institutions have failed to address the problem. Today’s curricula in many ways reduce technology to abstract concepts, calculations and models, and create a gap between the academic programs and the practical applications in the society. We explore two (Australia and Norway) initiatives on industry-based student training and discuss how these initiatives address and bridge the gap. We argue that these initiatives of industry-based student training contribute to bringing skills and general competences back into technological education, and that the effects are not limited to increased employability, but also include increased academic performance.

Let the journey begin : cultivating student identity and a sense of belonging through a formal academic welcome

Queensland University of Technology [QUT] Caboolture campus is a satellite campus co-located with Brisbane North Institute of TAFE. Building a sense of belonging on-campus continues to be challenging, with anecdotal evidence suggesting that QUT Caboolture students feel like second-class students, isolated from the prestige and excitement of the city campuses. A student identity and fostering a sense of belonging are fundamental to on-campus engagement and have been linked to retention (Field & Morgan-Klein, 2010). A formal welcome ceremony, including an academic procession in full regalia, was a new inclusion for QUT Caboolture’s 2013 Orientation Day. The ritual was intended to be a temporal mark for students to recognise their personal transition and emerging identity as a university student. Cultural capital is one ingredient in a complex mix of interactions and relationships to build a sense of identity. (Ecclestone, Biesta & Hughes, 2010). Fostering a sense of belonging and a connection to the campus and its staff was also anticipated. Students responded positively to the event, reporting feelings of excitement, inspiration and being welcomed into the university culture. The ceremony marked the beginning of the students’ journey together as QUT Caboolture students.

International students’ experiences of informed learning : a pedagogical case study

This case study explores the theory and practice of informed learning (Bruce, 2008) in a culturally diverse higher education context. It presents research findings about learning and teaching in a postgraduate unit of study entitled Personalised Language Development, an elective in the Master of TESOL and TEFL programs at Queensland University of Technology (QUT). This unit aims to enable international students to extend their disciplinary knowledge of English language teaching, their academic and linguistic fluency and awareness of their own information using processes. The paper outlines the case study research approach; describes the design and implementation of the unit; demonstrates how informed learning principles and characteristics underpin the unit design; presents findings about the international students’ experiences of informed learning through their reflections; and finally the paper discusses the implications of the findings for educators, including the potential transferability of informed learning across higher education disciplines.

Computer modeling of diffusion in biological tissues

Molecular-level computer simulations of restricted water diffusion can be used to develop models for relating diffusion tensor imaging measurements of anisotropic tissue to microstructural tissue characteristics. The diffusion tensors resulting from these simulations can then be analyzed in terms of their relationship to the structural anisotropy of the model used. As the translational motion of water molecules is essentially random, their dynamics can be effectively simulated using computers. In addition to modeling water dynamics and water-tissue interactions, the simulation software of the present study was developed to automatically generate collagen fiber networks from user-defined parameters. This flexibility provides the opportunity for further investigations of the relationship between the diffusion tensor of water and morphologically different models representing different anisotropic tissues.

Social Media Sites as Online Information Grounds : An exploratory study of the ways in which Information Technology (IT) professionals experience social media

Social media tools are often the result of innovations in Information Technology and developed by IT professionals and innovators. Nevertheless, IT professionals, many of whom are responsible for designing and building social media technologies, have not been investigated on how they themselves use or experience social media for professional purposes. This study will use Information Grounds Theory (Pettigrew, 1998) as a framework to study IT professionals’ experience in using social media for professional purposes. Information grounds facilitates the opportunistic discovery of information within social settings created temporarily at a place where people gather for a specific purpose (e.g., doctors’ waiting rooms, office tea rooms etc.), but the social atmosphere stimulates spontaneous sharing of information (Pettigrew, 1999). This study proposes that social media has the qualities that make it a rich information grounds; people participate from separate “places” in cyberspace in a synchronous manner in real-time, making it almost as dynamic and unplanned as physical information grounds. There is limited research on how social media platforms are perceived as a “place,” (a place to go to, a place to gather, or a place to be seen in) that is comparable to physical spaces. There is also no empirical study on how IT professionals use or “experience” social media. The data for this study is being collected through a study of IT professionals who currently use Twitter. A digital ethnography approach is being taken wherein the researcher uses online observations and “follows” the participants online and observes their behaviours and interactions on social media. Next, a sub-set of participants will be interviewed on their experiences with and within social media and how social media compares with traditional methods of information grounds, information communication, and collaborative environments. An Evolved Grounded Theory (Glaser, 1992) approach will be used to analyse tweets data and interviews and to map the findings against the Information Ground Theory. Findings from this study will provide foundational understanding of IT professionals’ experiences within social media, and can help both professionals and researchers understand this fast-evolving method of communications.

Proteomics science and society :the role of knowledge translation in moving towards clinical applications

Gaining support for proteomics science requires effective knowledge translation. Knowledge translation (KT) processes turn the evidence generated by scientific discovery into recommendations for clinical applications, funding priorities, and policy/regulatory reforms. Clinicians, regulators, and funders need to understand why emerging proteomics knowledge is relevant, and what are the potential applications of that knowledge. A lack of clarity remains about what KT means.

Diversifying Information Literacy Research : An Informed Learning Perspective

This article uses the idea of informed learning, an interpretation of information literacy that focuses on people’s information experiences rather than their skills or attributes, to analyse the character of using information to learn in diverse communities and settings, including digital, faith, indigenous and ethnic communities. While researchers of information behaviour or information seeking and use have investi- AU :2 gated people’s information worlds in diverse contexts, this work is still at its earliest stages in the information literacy domain. To date, information literacy research has largely occurred in what might be considered mainstream educational and workplace contexts, with some emerging work in community settings. These have been mostly in academic libraries, schools and government workplaces. What does information literacy look like beyond these environments? How might we understand the experience of effective information use in a range of community settings, from the perspective of empirical research and other sources? The article concludes by commenting on the significance of diversifying the range of information experience contexts,for information literacy research and professional practice.

Science fiction

Few science fiction films have been made in Australia by Australians for Australian audiences, with most of the handful of locally-produced films made since the mid-1990s. Yet there has always been a solid Australian audience for non-Australian science fiction films and a strong international niche audience for the genre. While Australia has provided below-the-line crews and heads of departments (cinematographers, production designers, and so on) for many non-Australian science fiction films produced domestically, few Australian film directors have specialised in the genre. This is somewhat surprising considering that Alex Proyas achieved a degree of international success for his gothic science fiction film Dark City (1998), and George Miller achieved international fame following the worldwide success of Mad Max II (1981). Although the science fiction element of Mad Max II is tenuous – and even more so in the case of the original Mad Max (George Miller, 1979) – Miller is credited with creating a new (sub)genre which incorporates science fiction elements and has been widely imitated internationally: the dystopian, post-apocalyptic movie. Nevertheless, Australia has only produced a small number of science fiction movies. In addition to the above films, key titles include: Mad Max Beyond Thunderdome (George Miller, 1985), Shirley Thompson versus the Aliens (Jim Sharman, 1972), The Time Guardian (Brian Hannant, 1987), The Chain Reaction (Ian Barry, 1980) and, more recently, Knowing (Alex Proyas, 2009), Daybreakers (Michael and Peter Spierig, 2009), and Iron Sky (Timo Vuorensola, 2012).

Post-genomic science & society : Getting our fangs into omics science and its implications

Genomics and genetic findings have been hailed with promises of unlocked codes and new frontiers of personalized medicine. Despite cautions about gene hype, the strong cultural pull of genes and genomics has allowed consideration of genomic personhood. Populated by the complicated records of mass spectrometer, proteomics, which studies the human protein, has not achieved either the funding or the popular cultural appeal proteomics scientists had hoped it would. While proteomics, being focused on the proteins that actually indicate and create disease states, has a more direct potential for clinical applications than genomic risk predictions, culturally, it has not provided the material for identity creation. In our ethnographic research, we explore how proteomic scientists attempting to shape an appeal to personhood through which legitimacy may be defined.

BWW ontology as a lens on IS design theory: Extending the design science research roadmap

The Design Science Research Roadmap (DSR-Roadmap) [1] aims to give detailed methodological guidance to novice researchers in Information Systems (IS) DSR. Focus group evaluation, one phase of the overall study, of the evolving DSR-Roadmap revealed that a key difficulty faced by both novice and expert researchers in DSR, is abstracting design theory from design. This paper explores the extension of the DSR-Roadmap by employing IS deep structure ontology (BWW [2-4]) as a lens on IS design to firstly yield generalisable design theory, specifically 'IS Design Theory' (ISDT) elements [5]. Consideration is next given to the value of BWW in the application of the design theory by practitioners. Results of mapping BWW constructs to ISDT elements suggest that the BWW is promising as a common language between design researchers and practitioners, facilitating both design theory and design implementation