887 resultados para 3D and 2D background modelling


Relevância:

100.00% 100.00%

Publicador:

Resumo:

RESUME: Une zone tectonique large et complexe, connue sous le nom de ligne des Centovalli, traverse le secteur des Alpes Centrales compris entre Domodossola et Locarno. Cette région, formée par le Val Vigezzo et la vallée des Centovalli, constitue la terminaison méridionale du dôme Lepontin et représente une portion de la zone des racines des nappes alpines. Elle fait partie d’une grande et complexe zone de cisaillement, en partie associée à des phénomènes hydrothermaux d’âge alpin (<20 Ma), qui comprend le système tectonique Insubrien et celui du Simplon. Le Val Vigezzo et les Centovalli constituent un vrai carrefour entre les principaux accidents tectoniques des Alpes ainsi qu'une zone de juxtaposition du socle Sudalpin avec la zone des racines de l’Austroalpin et du Pennique. Les phases de déformation et les structures géologiques qui peuvent être étudiées s'étalent sur une période comprise entre environ 35 Ma et l'actuel. L’étude détaillée de terrain a mis en évidence la présence de nombreuses roches et structures de déformation de type ductile et cassant tels que des mylonites, des cataclasites, des pseudotachylites, des kakirites, des failles minéralisées, des gouges de faille et des plis. Sur le terrain on a pu distinguer au moins quatre générations de plis liés aux différentes phases de déformation. Le nombre et la complexité de ces structures indiquent une histoire très compliquée, selon plusieurs étapes distinctes, parfois liées, voire même superposées. Une partie de ces structures de déformation affectent aussi les dépôts sédimentaires d’âge quaternaire, notamment des limons et des sables lacustres. Ces sédiments constituent les restes d'un bassin lacustre attribué à l'époque interglaciaire Riss/Würm (éemien, 67.000-120.000 ans) et ils affleurent dans la partie centrale de la zone étudiée, à l'Est de la plaine de Santa Maria Maggiore. Ces sédiments montrent en leur sein toute une série de structures de déformation tels que des plans de faille inverses, des structures conjuguées de raccourcissement et des véritables plis. Ces failles et ces plis représenteraient les évidences de surface d’une déformation probablement active en époque quaternaire. Une autre formation rocheuse a retenu tout notre attention; il s'agit d'un corps de brèches péridotitiques monogéniques qui affleure en discontinuité le long du versant méridional et le long du fond de la vallée Vigezzo sur environ 20 km. Ces brèches se posent indifféremment sur le socle (unités Finero, Orselina) ou sur les sédiments lacustres. Elles sont traversées par des plans de failles qui développent des véritables stries de faille et des gouges de faille; l’orientation de ces plans est la même que celle affectant les failles à gouges du socle. La genèse de cette brèche est liée à l'altération et au modelage glacier (rock-glaciers) d'une brèche tectonique originelle qui borde la partie externe du Corps de Finero. Les structures de déformation de cette brèche, pareillement à celles des sédiments lacustres, ont été considérées comme les évidences de surface d'une tectonique quaternaire active dans la région. La dernière phase de déformation cassante qui affecte cette région peut donc être considérée comme active en époque quaternaire. Une vue d’ensemble de la région étudiée nous permet de reconnaître à l’échelle régionale une zone de cisaillement complexe orientée E-W, parallèlement à l’axe de la vallée Centovalli-Val Vigezzo. Les données de terrain, indiquent que cette zone de cisaillement débute sous conditions ductiles et évolue en plusieurs étapes jusqu’à des conditions de failles cassantes de surface. La reconstruction de l'évolution géodynamique de la région a permis de définir trois étapes distinctes qui marquent le passage, de ce secteur de socle cristallin, de conditions P-T profondes à des conditions de surface. Dans ce contexte, on a reconnu trois phases principales de déformation à l’échelle régionale qui caractérisent ces trois étapes. La phase la plus ancienne est constituée par des mylonites en faciès amphibolite, associées à des mouvements de cisaillement dextre, qui sont ensuite remplacés par des mylonites en faciès schistes verts et des plis rétrovergentes liés au rétrocharriage des nappes alpines. Une deuxième étape est identifiée par le développement d’une phase hydrothermale liée à un système de failles extensives et décrochantes dextres à direction principale E-W, NE-SW et NW-SE. Leur caractérisation minéralogique a permis la mise en évidence des phases cristallines de néoformation liées à cet événement constituées par : K-feldspath (microcline), chlorites (Fe+Mg), épidotes, prehnite, zéolites (laumontite), sphène, calcite. Dans ce contexte, pour obtenir une meilleure caractérisation de cet événement hydrothermal on a utilisé des géothermomètres sur chlorites, sensible aussi à la pression et a la a(H2O), qui ont donné des valeurs descendantes comprises entre 450-200°C. Les derniers mouvements sont mis en évidence par le développement d’une série de plans majeurs de failles à gouge, qui forment une structure en sigmoïdes d’épaisseur kilométrique reconnaissable à l’échelle de la vallée et caractérisée par des mouvements transpressifs avec une composante décrochante dextre toujours importante. Cette phase de déformation forme un système conjugué de failles avec direction moyenne E-W qui coupent la zone des racines des nappes alpines, la zone du Canavese et le corps ultramafique de Finero. Ce système se déroule de manière subparallèle à l'axe de la vallée le long de plusieurs dizaines de kilomètres. Une analyse complète et détaillée des gouges de faille par XRD a montré que la fraction argileuse (<2 µm) de ces gouges contient une partie de néoformation très importante constituée par, des illites, des chlorites et des interstratifiés de type illite/smectite ou chlorite/smectite. Des datations avec méthode K-Ar sur ces illites ont donné des valeurs comprises entre 12 et 4 Ma qui représentent l'âge de cette dernière déformation cassante. L'application de la méthode de la cristallinité de l'illite (C.I.) a permis d'évaluer les conditions thermiques qui caractérisent le déroulement de cette dernière phase tectonique qui se produit sous conditions de température caractéristiques de l'anchizone et de la diagenèse. L'ensemble des structures de déformation qu'on vient de décrire s'insère parfaitement dans le contexte de convergence oblique entre la plaque adriatique et celle européenne qui à produit l'orogène alpin. On peut considérer les structures tectoniques du Val Vigezzo-Centovalli comme l'expression d'une zone majeure de cisaillement "Simplo-Insubrienne". L'empilement structural et les structures tectoniques affleurantes dans la région sont le résultat de l'interaction entre un régime tectonique transpressif et un régime transtensif. Ces deux champs de tension sont antagonistes entre eux mais sont reliés, de toute façon, à une seule phase décrochante dextre principale, due à une convergence oblique entre deux plaques. À l'échelle de l'évolution géodynamique on peut distinguer différentes étapes au cours desquelles les structures de ces deux régimes tectoniques interagissent en manière différente. En accord avec les données géophysiques et les reconstructions paléodynamiques prises dans la littérature on considère que la ligne Rhône-Simplon-Centovalli représente l'évidence de surface de la suture majeure profonde entre la plaque Adriatique et celle Européenne. Les vitesses de soulèvement qui ont été calculées dans cette étude pour cette région des Alpes donnent une valeur moyenne de 0.8 mm/a qui est tout à fait comparable avec les données proposées par la littérature sur cette zone. La zone Val Vigezzo-Centovalli peut être donc considérée comme un carrefour géologique où se croisent différentes phases tectoniques qui représentent les évidences de surface d'une suture profonde majeure entre deux plaques dans un contexte de collision continentale. ABSTRACT: A wide and complex tectonic zone known as Centovalli line, crosses the Central Alps sector between Domodossola and Locarno. This area, formed by the Vigezzo Valley and Centovalli valley, constitutes the southernmost termination of the Lepontin dome and represents a portion of the alpine nappes root zone. It belongs to a large and complex shear-zone, partly associated with hydrothermal phenomena of alpine age (<20 My), which includes the Insubric Line and the Simplon fault zone. Vigezzo Valley and Centovalli constitute a real crossroads between the mains alpines tectonics lines as well as a zone of juxtaposition of the Southalpine basement with the Austroalpin and Pennique root zone. The deformation phases and the geological structures that can be studied between approximately 35 My and the present. The detailed field study showed the presence of many brittle and ductile deformation structures and fault rocks such as mylonites, cataclasites, pseudotachylites, kakirites, mineralized faults, fault gouges and folds. In the field we could distinguish at least four folds generations related to the various deformation phases. The number and the complexity of these structures indicate a very complicated history, comprising several different stages, that sometimes are related and even superimposed. Part of these deformation structures affect also the sedimentary deposits of quaternary age, in particular the silts and sands lake deposit. These sediments constitute the remainders of a lake basin ascribed to the interglacial Riss/Würm (Eemien, 67.000-120.000 years) and outcroping in the central part of the studied area, in the Eastern part of Santa Maria Maggiore plain. These sediments show a whole series of deformation structures such as inverse fault planes, combined shortening structures and true folds. These faults and folds would represent the surface evidence of a probably active tectonic deformation in quaternary time. Another rock formation attracted all our attention. It is a body of monogenic peridotite breccia which outcrops in discontinuity along the southernmost slope and the bottom of the Vigezzo valley on approximately 20 km. This breccia lies indifferently on the basement (Finero and Orselina units) or on the lake sediments. They are crossed by fault planes which developed slikenside and fault gouges whose orientation is the same of the faults gouges in the alpine basement. This breccia results from the weathering and the surface modelling of an original tectonic breccia which borders the external part of Finero peridotite body. This breccia deformation structures, like those of the lake sediments, were regarded as the surface interaction of active quaternary tectonics in the area. So the last brittle deformation phases which affects this area seems to be actives in quaternary time. Theoverall picture of the studied area on a regional scale enables us to point out a complex shear-zone directed E-W, parallel to the axis of the Centovalli and Vigezzo Valley. The field analysis indicates that this shear-zone began under ductile conditions and evolved in several stages to brittle faulting under surface conditions. The analysis of the geodynamic evolution of the area allows to define three different stages which mark the transition of this alpine basement root zone, from deep P-T conditions to P-T surface conditions. In this context on regional scale three principal deformation phases, which characterize these three stages can be distinguished. The oldest phase consisted of the amphibolitie facies mylonites, associated to dextral strikeslip movements. They are then replaced by green-schists facies mylonites and backfolds related to the backthrusting of the alpines nappes. A second episode is caracterized by the development of an hydrothermal phase bound to an extensive fault and dextral strike-slip fault system, with E-W, NW-SE and SE-NW principal directionsThe principal neoformed mineral phases related to this event are: K-feldspar (microcline), chlorites (Fe+Mg), epidotes prehnite, zéolites (laumontite), sphene and calcite. In this context, to obtain a better characterization of this hydrothermal event, we have used an chlorite geothermometer, sensitive also to the pressure and has the a(H2O), which gave downward values ranging between 450-200°C. The last movements are caracterized by the development of important gouge fault plans, which form a sigmoid structure of kilometric thickness which is recognizable at the valley scale, and is characterized by transpressive movements always with a significant dextral strike-slip component. This deformation phase forms a combined faults system with an average E-W direction, which cuts trough the alpine root zone, the Canavese zone and the Finero ultramafic body. This fault system takes place subparallel to the axis of the valley over several tens of kilometers. A complete and detailed XRD analysis of the gouges fault showed that the clay fraction (<2µm) contains a very significant neo-formation of illite, chlorites and mixed layered clays such as illite/smectite or chlorite/smectite. The K-Ar datings of the illite fraction <2µm gave values ranging between 12 and 4 My and the illite fraction <0.2µm gave more recents values until to 2,4-0 My.This values represent the age of this last brittle deformation. The application of the illite crystallinity method (C.I.) allowed evaluating the thermal conditions which characterize this tectonic phase that occured under temperature conditions of the anchizone and diagenesis. The whole set of deformation structures which we just described, perfectly fit the context of oblique convergence between the Adriatic and the European plate that produced the alpine orogen. We can regard the Vigezzo valley and Centovalli tectonic structures as the expression of a major "Simplo-Insubric" shear-zone. Structural stacking and tectonic structures that outcrop in the studied area, are the result of the interaction between a transpressive and a transtensve tectonic phases. These two tension fields are antagonistic but they are also connected, in any event, with only one principal dextral strike-slip movement, caused by an oblique convergence between two plates. On the geodynamic evolution scale we can distinguish various stages during which these two tectonic structures fields interact in various ways. In agreement with the geophysical data and the paleodynamic recostructions taken in the literature we considers that the Rhone-Simplon-Centovalli line are the surface feature of the major collision between the Adriatique and the European plate at depth. The uplift speeds we calculated in this study for this Alpine area give an average value of 0.8 mm/a, which is in good agreement with the data suggested by the literature on this zone. TheVigezzo Valley and Centovalli zone can therefore be regarded as a geological crossroad where various tectonic phases are superimposed. They represent the evidences of a major and deeper suture between two plates in a continental collision context.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Este artículo trata de mostrar cómo algunas obras de arte permiten reflexionar y entender situaciones sociales, políticas y culturales del pasado a través del análisis tanto del producto artístico final, como del entorno vital de los creadores.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Este artículo trata de mostrar cómo algunas obras de arte permiten reflexionar y entender situaciones sociales, políticas y culturales del pasado a través del análisis tanto del producto artístico final, como del entorno vital de los creadores.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Työn tavoitteena oli kasvattaa sahan dimensiolaitoksella käytettävän trimmerin rakenteellista kapasiteettia. Tavoitteeseen pyrittiin modernisoimalla trimmerin teräyksikköä käyttävää toimilaite ja teräyksikön säätö dynamiikan mallinnuksen avulla. Trimmerin teräyksikön dynamiikka mallinnettiin MATLAB-matematiikkaohjelmistolla kaksiulotteisena kinematiikkamallina ja kolmeulotteisena kinetiikkamallina. Dynamiikkamallien tulosten perusteella valittin teräyksikköä käyttävä toimilaite komponentteineen. Kinetiikkamalliin mallinnettiin trimmeriä käyttävä hydraulipiiri valittuine komponentteineen keskittyneiden paineiden ja puoliempiirisen mallinnuksen periaatteita käyttäen. Teräyksikön työkiertoa säätämään mallinnettiin suljettu takaisinkytketty säätöpiiri. Tuloksien perusteella valittiin optimaalinen toimilaitteen asemointigeometria ja todettiin mallinnetun järjestelmän täyttävän asetetut vaatimukset. Järjestelmää testattiin muuttamalla jarjestelman parametreja ja tutkimalla muutosten vaikutuksia jarjestelman toimintaan. Lisaksi tutkittiin lyhyesti terayksikon rakenteen keventamisen vaikutuksia.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

PURPOSE: To test the hypothesis that both coronary anatomy and ventricular function can be assessed simultaneously using a single four-dimensional (4D) acquisition. METHODS: A free-running 4D whole-heart self-navigated acquisition incorporating a golden angle radial trajectory was implemented and tested in vivo in nine healthy adult human subjects. Coronary magnetic resonance angiography (MRA) datasets with retrospective selection of acquisition window width and position were extracted and quantitatively compared with baseline self-navigated electrocardiography (ECG) -triggered coronary MRA. From the 4D datasets, the left-ventricular end-systolic, end-diastolic volumes (ESV & EDV) and ejection fraction (EF) were computed and compared with values obtained from conventional 2D cine images. RESULTS: The 4D datasets enabled dynamic assessment of the whole heart with isotropic spatial resolution of 1.15 mm(3) . Coronary artery image quality was very similar to that of the ECG-triggered baseline scan despite some SNR penalty. A good agreement between 4D and 2D cine imaging was found for EDV, ESV, and EF. CONCLUSION: The hypothesis that both coronary anatomy and ventricular function can be assessed simultaneously in vivo has been tested positive. Retrospective and flexible acquisition window selection allows to best visualize each coronary segment at its individual time point of quiescence. Magn Reson Med, 2014. © 2014 Wiley Periodicals, Inc.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this study was to analyze the effects of Group Support Systems (GSS) to overall efficiency of innovation process. Overall efficiency was found to be a sum of meeting efficiency, product effectiveness, and learning efficiency. These components were studied in various working situations common in early stages of innovation process. In the empirical part of this study, the suitability of GSS at the forest company was assessed. The basics for this study were idea generation meetings held at LUT and results from the surveys done after the sessions. This data combined with the interviews and theoretical background was used to analyze suitability of this technology to organizational culture at the company. The results of this study are divided to theory and case level. On theory level GSS was found to be a potentially valuable tool for innovation managers, especially at the first stages of the process. On case level, GSS was found to be a suitable tool at Stora Enso for further utilization. A five step implementation proposal was built to illustrate what would be the next stages of GSS implementation, if technology was chosen for further implementation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Segmentointi on strateginen työkalu, joka tehostaa yrityksen resurssien käyttöä ja siten vaikuttaa kaikkiin asiakkuuksiin liittyviin liiketoimintaprosesseihin. Työn tavoitteena oli muodostaa segmentointimalli (sisältää sekä segmentointiprosessin että kriteerit) yritysinternetmarkkinoille. Työn tuloksia voidaan kuitenkin tulkita ja soveltaa laajemmin korkean teknologian yrityspalvelumarkkinoille. Tämä tutkielma lisää tietämystämme ja tarjoaa uudenlaisen näkemyksen segmentointiin korkean teknologian yrityspalvelumarkkinoilla. Työssä kuvataan korkean teknologian ja yritys- sekä palvelumarkkinoinnin erityispiirteitä ja kuinka nämä tekijät vaikuttavat segmentointimallin. Tutkimuksessa selvitettiin kohdeyrityksen nykyiset segmentointikäytännöt henkilökohtaisin asiantuntijahaastatteluin. Haastatteluiden avulla luotiin kuva nykyisistä lähestymistavoista sekä niiden lähtökohdista, vahvuuksista ja haasteista. Haastatteluiden analysoinnin jälkeen perustettiin projekti segmentoinnin kehittämiseksi. Työ tuloksena luotiin segmentointimalli, joka tarjoaa vankan perustan segmentoinnin kehittämiselle jatkuvana prosessina. Työssä esitetään segmentoinnin integroimista yrityksen asiakkuuksiin liittyviin liiketoimintaprosesseihin, joka usein puuttuu aiemmista töistä, sekä informaationkulun tehostamista segmentoinnin hyödyntämiseksi tehokkaammin. Segmentointi on strateginen työkalu ja vaatii siksi ylemmän johdon tuen ja sitoutumisen. Oikein sovellettuna segmentointi tarjoaa liiketoiminnalle mahdollisuuden merkittäviin etuihin kuten asiakastyytyväisyyden ja kannattavuuden kehittämiseen.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Työn tavoitteena oli suunnitella ja toteuttaa elinkaarikustannusten laskentasovellus teknologiaympäristössä. Ensin luotiin elinkaarikustannuslaskennalle viitekehys ja työlle teoreettinen pohja kirjallisuuslähteiden perusteella. Varsinainen tutkimus aloitettiin strategisille asiakkaille suunnatulla tutkimuksella heidän käyttämistään sovelluksista elinkaarikustannusten laskentaan, laskennan menetelmistä sekä yhteistyön kannalta oleellisista kustannusparametreista. Lisäksi selvitettiin yrityksen omat tarpeet laskennalle.Seuraavaksi kartoitettiin markkinoilta löytyviä sovelluksia elinkaarikustannusten hallintaan, joista valittiin neljä tarkempaan vertailuun aiemmin selvitettyjen vaatimusten perusteella. Vaihtoehtona harkittiin myös oman laskentasovelluksen kehittämistä, mutta todettiin vertailussa löytyneen valmiin ohjelmiston täyttävän sovellukselle asetetut vaatimukset niin hyvin, ettei oman sovelluksen suunnittelun katsottu olevan tarpeellista.Lopuksi muokattiin valittu sovellus toimimaan tulevassa käyttöympäristössä ja luotiin käytön kannalta oleelliset tietokannat elinkaarikustannusten laskennassa tarvittaville lähtötiedoille. Samalla luotiin myös toimintarutiinit ja jaettiin vastuut sovelluksen tulevaa käyttöä ja tietokantojen päivitystä varten. Tutkimuksen tuloksena saatiin yrityksen käyttöön luotua sekä yrityksen että asiakkaiden vaatimukset täyttävä sovellus elinkaarikustannusten laskentaan.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tutkielmassa tarkasteltiin muodostuvan RosettaNet-palvelun toteuttamiseen tarvittavia osaamisia ja valittiin osaamisien perusteella parhaat mahdolliset partnerit. Aluksi selvitettiin verkottuvan liiketoiminnan periaatteita sekä verkostoitumisen vaikutusta yritysten nykyiseen toimintaympäristöön. Verkostoista siirryttiin arvoverkostoihin sekä niiden sisälle muodostuvien arvontuotantojärjestelmien toimintaan, joiden pohjalta luotiin RosettaNet-palvelun ympärille muodostuva arvoverkosto ja havaittiin sen sisältävän useita erillisiä arvontuotantojärjestelmiä. Arvontuotantojärjestelmien ja empiirisen kokemuksen pohjalta hahmotettiin palveluun tarvittavat osaamiset, joita olivat teknologia-alustaosaaminen, myynti ja konsultointiosaaminen, ratkaisusuunnitteluja integraatio-osaaminen. Näiden osaamisten perusteella kartoitettiin kaikki mahdolliset partnerit, joiden kanssa tuleva palvelu voitaisiin toteuttaa. Tällöin pääkriteereinä olivat partnerin osaaminen ja sopivuus palveluntarjoajan nykyiseen toimintaympäristöön. Alustavien tutkimuskierrosten jälkeen jäljelle jääneille partneriehdokkaille suoritettiin teemahaastattelut ja yritysten taustojen selvitys. Näiden tutkimusten perusteella yritysten osaamiset ja soveltuvuudet arvioitiin ja tehtiin ehdotus siitä, kuinka Palveluntarjoajan tulisi partneroitua RosettaNet-palvelun osalta. Tutkielmassa muodostettu arvoverkosto ja sen perusteella tehty partnerikartoitus on tehty Palveluntarjoajan tarpeiden pohjalta, eikä se sellaisenaan sovellu käytettäväksi yleisenä toimintamallina johtuen jokaiselle yritykselle ominaisesta toimintaympäristöstä ja tarpeista.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

BACKGROUND: The primary analysis of the FLAMINGO study at 48 weeks showed that patients taking dolutegravir once daily had a significantly higher virological response rate than did those taking ritonavir-boosted darunavir once daily, with similar tolerability. We present secondary efficacy and safety results analysed at 96 weeks. METHODS: FLAMINGO was a multicentre, open-label, phase 3b, non-inferiority study of HIV-1-infected treatment-naive adults. Patients were randomly assigned (1:1) to dolutegravir 50 mg or darunavir 800 mg plus ritonavir 100 mg, with investigator-selected combination tenofovir and emtricitabine or combination abacavir and lamivudine background treatment. The main endpoints were plasma HIV-1 RNA less than 50 copies per mL and safety. The non-inferiority margin was -12%. If the lower end of the 95% CI was greater than 0%, then we concluded that dolutegravir was superior to ritonavir-boosted darunavir. This trial is registered with ClinicalTrials.gov, number NCT01449929. FINDINGS: Of 595 patients screened, 488 were randomly assigned and 484 included in the analysis (242 assigned to receive dolutegravir and 242 assigned to receive ritonavir-boosted darunavir). At 96 weeks, 194 (80%) of 242 patients in the dolutegravir group and 164 (68%) of 242 in the ritonavir-boosted darunavir group had HIV-1 RNA less than 50 copies per mL (adjusted difference 12·4, 95% CI 4·7-20·2; p=0·002), with the greatest difference in patients with high viral load at baseline (50/61 [82%] vs 32/61 [52%], homogeneity test p=0·014). Six participants (three since 48 weeks) in the dolutegravir group and 13 (four) in the darunavir plus ritonavir group discontinued because of adverse events. The most common drug-related adverse events were diarrhoea (23/242 [10%] in the dolutegravir group vs 57/242 [24%] in the darunavir plus ritonavir group), nausea (31/242 [13%] vs 34/242 [14%]), and headache (17/242 [7%] vs 12/242 [5%]). INTERPRETATION: Once-daily dolutegravir is associated with a higher virological response rate than is once-daily ritonavir-boosted darunavir. Dolutegravir compares favourably in efficacy and safety to a boosted darunavir regimen with nucleoside reverse transcriptase inhibitor background treatment for HIV-1-infected treatment-naive patients. FUNDING: ViiV Healthcare and Shionogi & Co.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tämän diplomityön päämääränä oli tutkia nykyisen optisen markkinasektorin nykytilaa ja ennakoida mahdollista tulevaa kapasiteetin tarpeen kasvua merkittävän taantumakauden jälkeen. Erityistä huomiota käytettiin kaapelin valmistuksen vaiheisiin ja näitä vastaaviin laitteisiin. Tätä kautta selvitettiin nykyisten markkinoilla toimivien laiteratkaisujen ominaisuudet. Työssä havaittiin kuitukaapeleiden rakenneratkaisujen muuttuvan asennettavuuden parantamisen ja kaapeleiden paremman kestävyyden suuntaan. Näiden muuttuessa tulevat valmistustekniikat ja menetelmät kehittymään vastaamaan uusia ratkaisuja. Laserhitsausmenetelmällä voidaan laajentaa kaapeleiden rakenneratkaisujen ja materiaalivaihtoehtojen valikoimaa perinteisen extruusiotekniikan rinnalle. Työ avaa uusia toteutusmandollisuuksia kaapelinvalmistusprosessiin, sekä antaa pohjaa uusien kaapelirakenteiden tuomiseen globaaleille optisen kuitukaapelin markkinoille.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Ever since the inception of economics over two hundred years ago, the tools at the discipline's disposal have grown more and more more sophisticated. This book provides a historical introduction to the methodology of economics through the eyes of economists. The story begins with John Stuart Mill's seminal essay from 1836 on the definition and method of political economy, which is then followed by an examination of how the actual practices of economists changed over time to such an extent that they not only altered their methods of enquiry, but also their self-perception as economists. Beginning as intellectuals and journalists operating to a large extent in the public sphere, they then transformed into experts who developed their tools of research increasingly behind the scenes. No longer did they try to influence policy agendas through public discourse; rather they targeted policymakers directly and with instruments that showed them as independent and objective policy advisors, the tools of the trade changing all the while. In order to shed light on this evolution of economic methodology, this book takes carefully selected snapshots from the discipline's history. It tracks the process of development through the nineteenth and twentieth centuries, analysing the growth of empirical and mathematical modelling. It also looks at the emergence of the experiment in economics, in addition to the similarities and differences between modelling and experimentation. This book will be relevant reading for students and academics in the fields of economic methodology, history of economics, and history and philosophy of the social sciences.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

OBJETIVO: Avaliar o impacto da ranitidina por via oral na qualidade do exame de colangiopancreatografia por ressonância magnética (CPRM). MATERIAIS E MÉTODOS: Trinta e dois pacientes realizaram CPRM com aquisições 3D e 2D, com três estratégias de supressão do sinal líquido gastrintestinal: a) apenas em jejum; b) 12 horas após ingerir 300 mg de ranitidina; c) após a ingestão de solução de gadolínio. Três observadores avaliaram os estudos, atentos para o grau de visualização da árvore biliopancreática. Foi medida a concordância interobservador com o teste kappa. A diferença entre técnicas e formas de aquisição foi avaliada pela média da soma dos escores de graduação. RESULTADOS: As três estratégias de supressão do sinal líquido gastrintestinal apresentaram elevada reprodutibilidade. A supressão do sinal líquido gastrintestinal com a ranitidina foi semelhante ao jejum e ambas foram piores do que a solução de gadolínio. As aquisições 3D superaram a 2D apenas na visualização do ducto cístico e da vesícula biliar, sendo inferior ou equivalente nos demais segmentos ductais biliopancreáticos. CONCLUSÃO: O uso da ranitidina não parece justificado para aprimorar a avaliação da árvore biliopancreática em exames de CPRM. A CPRM 2D apenas em jejum permite a visualização ductal com elevada qualidade e reprodutibilidade na maioria dos casos.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objective To evaluate the association of conventional angiography (AG) with computed tomography angiography (CTA) as compared with CTA only, preoperatively, in the treatment of aortic diseases. Materials and Methods Retrospective study involving patients submitted to endovascular treatment of aortic diseases, in the period from January 2009 to July 2010, with use of preoperative CTA + conventional AG or CTA only. The patients were divided into two groups, namely: G1 – thoracic aortic diseases; and G2 – abdominal aortic diseases. G1 was subdivided into 1A (preoperative AG + CTA) and 1B (preoperative CTA). G2 was subdivided into 2C (CTA + AG) and 2D (CTA only). Results The authors evaluated 156 patients. In subgroups 1A and 1B, the rate of technical success was, respectively, 100% and 94.7% (p = 1.0); and the rate of therapeutic success was, respectively, 81% and 58% (p = 0.13). A higher number of complications were observed in subgroup 1B (p = 0.057). The accuracy in the calculation of the prosthesis was higher in subgroup 1A (p = 0.065). In their turn, the rate of technical success in subgroups 2C and 2D was, respectively, 92.3% and 98.6% (p = 0.17). The rate of therapeutic success was 73% and 98.6% (p = 0.79). Conclusion Preoperative conventional AG should be reserved for cases where CTA cannot provide all the information in the planning of a therapeutic intervention.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The structures of seven oleanene and ursene triterpenoids (1-7) isolated from aerial parts of Mentha villosa were identified. In addition, the complete ¹H and 13C resonance assignments of these triterpenoids were accomplished using 1D and 2D NMR spectroscopic experiments.