Forest typology of broadleaf forests from Sierra Maestra, Eastern Cuba

A phytosociological study of the forests from Sierra Maestra is conducted, following the methodology of the Zurich- Montpelier School. They are transformed into a forest typology using the standards of the Institute of Agro-Forestry Research. In general, 35 types and/or subtypes are presented. From this group, the most abundant ones belong to semi-deciduous microphyll forest, followed by those from mangroves and mountain rainforest, respectively. Silvicultural treatments are needed; among them, the protection forests are those found above 800 m asl and mangroves. 

A two-step approach for the analysis of hybrids in comparative social policy analysis: a nuanced typology of childcare policies

Typologies have represented an important tool for the development of comparative social policy research and continue to be widely used in spite of growing criticism of their ability to capture the complexity of welfare states and their internal heterogeneity. In particular, debates have focused on the presence of hybrid cases and the existence of distinct cross-national pattern of variation across areas of social policy. There is growing awareness around these issues, but empirical research often still relies on methodologies aimed at classifying countries in a limited number of unambiguous types. This article proposes a two-step approach based on fuzzy-set-ideal-type analysis for the systematic analysis of hybrids at the level of both policies (step 1) and policy configurations or combinations of policies (step 2). This approach is demonstrated by using the case of childcare policies in European economies. In the first step, parental leave policies are analysed using three methods – direct, indirect, and combinatory – to identify and describe specific hybrid forms at the level of policy analysis. In the second step, the analysis focus on the relationship between parental leave and childcare services in order to develop an overall typology of childcare policies, which clearly shows that many countries display characteristics normally associated with different types (hybrids and. Therefore, this two-step approach enhances our ability to account and make sense of hybrid welfare forms produced from tensions and contradictions within and between policies.

The Effect of Legal Culture on the Development of International Evidentiary Practice: From the ‘Robing Room’ to the ‘Melting Pot’

This paper draws on some of the preliminary findings of a small pilot study which aimed to discover what evidentiary challenges a range of practitioners with experience of different international trials faced in the cases they were involved in, and what practices were developed to deal with these challenges. The findings in this study are based on the data collected from The Hague-based institutions, the ICC, the ICTY, the ICTY and ICTR Appeals Chamber, and the Special Tribunal for the Lebanon (STL). It is argued that professionals moving from institution to institution are engaged in a process of cross-pollination which itself influences the practices that develop, although a common understanding of certain evidentiary issues in international trials remains fragmented and at times elusive.

Hierarchy v typology of evidence

Hierarchy v typology of evidence animation

Integration of learning and practice as part of the educational system development in Eritrea. "School Management" - a distance learning program by technical university of Kaiserslautern

The distance learning program "School Management" supports decision makers at the school and ministerial levels in the shaping of formal and informal learning processes at different levels in schools and curricula in Eritrea. This paper examines how the distance learning program is interconnected to educational system development. (DIPF/Orig.)

Occupational therapists’ perceptions of occupation in practice : an exploratory study

Design of advanced reverse osmosis and nanofiltration membranes for water purification

Most commercially available reverse osmosis (RO) and nanofiltration (NF) membranes are based on the thin film composite (TFC) aromatic polyamide membranes. However, they have several disadvantages including low resistance to fouling, low chemical and thermal stabilities and limited chlorine tolerance. To address these problems, advanced RO/NF membranes are being developed from polyimides for water and wastewater treatments. The following three projects have resulted from my research. (1) Positively charged and solvent resistant NF membranes. The use of solvent resistant membranes to facilitate small molecule separations has been a long standing industry goal of the chemical and pharmaceutical industries. We developed a solvent resistant membrane by chemically cross-linking of polyimide membrane using polyethylenimine. This membrane showed excellent stability in almost all organic solvents. In addition, this membrane was positively charged due to the amine groups remaining on the surface. As a result, high efficiency (> 95%) and selectivity for multivalent heavy metal removal was achieved. (2) Fouling resistant NF membranes. Antifouling membranes are highly desired for “all” applications because fouling will lead to higher energy demand, increase of cleaning and corresponding down time and reduced life-time of the membrane elements. For fouling prevention, we designed a new membrane system using a coating technique to modify membrane surface properties to avoid adsorption of foulants like humic acid. A layer of water-soluble polymer such as polyvinyl alcohol (PVA), polyacrylic acid (PAA), polyvinyl sulfate (PVS) or sulfonated poly(ether ether ketone) (SPEEK), was adsorbed onto the surface of a positively charged membrane. The resultant membranes have a smooth and almost neutrally charged surface which showed better fouling resistance than both the positively charged NF membranes and commercially available negatively charged NTR-7450 membrane. In addition, these membranes showed high efficiency for removal of multivalent ions (> 95% for both cations and anions). Therefore, these antifouling surfaces can be potentially used for water softening, water desalination and wastewater treatment in a membrane bioreactor (MBR) process. (3) Thermally stable RO membranes. Commercial RO membranes cannot be used at temperature higher than 45°C due to the use of polysulfone substrate, which often limits their applications in industries. We successfully developed polyimides as the membrane substrate for thermally stable RO membranes due to their high thermal resistance. The polyimide-based composite polyamide membranes showed desalination performance comparable to the commercial TFC membrane. However, the key advantage of the polyimide-based membrane is its high thermal stability. As the feed temperature increased from 25oC to 95oC, the water flux increased 5 - 6 times while the salt rejection almost kept constant. This membrane appears to provide a unique solution for hot water desalination and also a feasible way to improve the water productivity by increasing the operating temperature without any drop in salt rejection.

Possibilities of advanced MAG-welding processes in shipbuilding

In shipbuilding industry welding of primer coated and tack welded steel products cause different issues. Primer coated steel products are commonly used at shipyards to ensure corrosion free storage of products in outdoor conditions. However usage of primer can cause imperfections to welds. To prevent porosity primed steel products are usually welded with tubular welding wires. Tack welds cause commonly interferences in mechanized welding when over welded, which increases costs related to welding due to increased need of preparing and repairing. The aim of this study is to research possibilities of advanced solid wire MAG-welding processes to deal with these two previously mentioned problems. This study concentrates to examine possibilities of MAG-welding, pulse MAG-welding, double pulse MAG-welding, RapidArc and ForceArc processes. Large amount of experiments were made to find out the produced porosity and the ability to over weld tack welds with each process in different circumstances. In welding of primed steel products porosity is caused mainly by hydrogen, CO, CO2, nitrous gases and zinc fumes. It was found in experiments that porosity of MAG-welding can be greatly decreased by using pulse MAG-welding instead. Also reduction of welding speed, usage of air gap and usage of solid wire product with higher amount of alloying elements reduces porosity. Researched advanced MAG-welding processes did not have an improvement into over welding of tack welds. With studied throat thicknesses and welding positions conventional MAG-welding managed better over welding of tack welds than the four studied advanced MAG-welding processes. Studied solid wire MAG-welding processes would be best suited at shipyard for mechanized welding in welding position PB. In welding positions PD and PG tubular welding wires are clearly more productive.

Life cycle assessment of advanced bioethanol production from pulp and paper sludge

This work evaluates the environmental performance of using pulp and paper sludge as feedstock for the production of second generation ethanol. An ethanol plant for converting 5400 tons of dry sludge/year was modelled and evaluated using a cradle-to-gate life cycle assessment approach. The sludge is a burden for pulp and paper mills that is mainly disposed in landfilling. The studied system allows for the valorisation of the waste, which due to its high polysaccharide content is a valuable feedstock for bioethanol production. Eleven impact categories were analysed and the results showed that enzymatic hydrolysis and neutralisation of the CaCO3 are the environmental hotspots of the system contributing up to 85% to the overall impacts. Two optimisation scenarios were evaluated: (1) using a reduced HCl amount in the neutralisation stage and (2) co-fermentation of xylose and glucose, for maximal ethanol yield. Both scenarios displayed significant environmental impact improvements.

Motivations to interact with brands on Facebook – Towards a typology of consumer–brand interactions

In recent years, Facebook and other social media have become key players in branding activities. However, empirical research on consumer–brand interactions on Facebook is still in its infancy. Therefore, the aim of this research is to provide additional insights to brand managers on how to adapt their approaches to increase consumers’ interactions with brands on Facebook. In this study, we apply the uses and gratification theory proposed by Katz to develop a new typology of consumers based on consumer motivations to interact with brands on Facebook, and explore the type and intensity of these interactions. We identify five main motivations that might influence consumers’ interactions with a brand on Facebook: (i) social influence, (ii) search for information, (iii) entertainment, (iv) trust and (v) reward. Building on these five motivations, a classification using clustering techniques reveals four different groups of consumers: (i) ‘brand detached’, (ii) ‘brand profiteers’, (iii) ‘brand companions’ and (iv) ‘brand reliants’. Our results provide valuable and applicable insights for social media marketing activities, which will assist brand managers to develop strategies for effectively reaching and influencing the most desirable groups of consumers.

Vandetanib for the Treatment of Advanced Medullary Thyroid Cancer Outside a Clinical Trial: Results from a French Cohort

International audience

Sketching the temporal landscape : The case of night nursing

We take for granted that we exist in dimensions of time and space. We accept that time passes and that space extends as a matter of course. Just as our personal space is important to us, so is time of our own. The individual is capable of developing a variety of time perspectives or orientations, each applicable to a different aspect of life, for instance, home, leisure, economic, political and organisational. Our temporal perspective influences a wide range of psychological processes, from motivation, emotions and spontaneity to risk-taking creativity and problem-solving. Our temporal landscapes are made up of recognisable domains, with permeable borders – private time and public time, home time and work time, past, present and future time, cyclical time. Just as a geography of space contains recognisable natural features – rivers, deserts, mountains – and features created by human beings – canals, roads, skyscrapers – so our temporal landscape contains natural features – day and night, the seasons – and features created by us – the ordering of social, economic, legal, and organisational time into, among others, the practices of family life, financial periods, prison sentences and workloads. This paper views the temporal landscapes of night nurses, and is based on longitudinal ethnographic research. It highlights areas such as shift work, workload, and the temporal aspects of caring. The result is the production of a map, albeit a rough one, of the temporal landscape inhabited by night nurses as they go about their working lives.