Compensatory Education: Approaching the Problem from the Wrong Direction

*Designated as an exemplary master's project for 2015-16*

Chemical analysis of water samples of station M1_1207, Red Sea (Table 1-3)

Two water samples and two sediment samples taken in 1965 by the R. V. "Meteor" in the area of the hot salt brine of the Atlantis II-Deep were chemically investigated, and in addition the sediment samples were subjected to X-ray and optical analysis. The investigation of the sulfur-isotope-ratios showed the same values for all water samples. This information combined with the Ca-sulfate solubility data leads us to conclude that, for the most part, the sulfate content of the salt brine resulted from mixing along the boundary with the normal seawater. In this boundary area gypsum or anhydrite is formed which sinks down to the deeper layers of the salt brine where it is redisolved when the water becomes undersaturated. In the laboratory, formation of CaS04 precipitate resulted from both the reheating of the water sample from the uppermost zone of the salt brine to the in-situ-temperature as well as by the mixing of the water sample with normal Red Sea water. The iron and manganese delivered by the hot spring is separated within the area of the salt brine by their different redox-potentials. Iron is sedimented to a high amount within the salt brine, while, as evidenced by its small amounts in all sediment samples, the more easily reducible manganese is apparently carried out of the area before sedimentation can take place. The very good layering of the salt brine may be the result of the rough bottom topography with its several progressively higher levels allowing step-like enlargements of the surface areas of each successive layer. Each enlargement results in larger boundary areas along which more effective heat transfer and mixing with the next layer is possible. In the sediment samples up to 37.18% Fe is found, mostly bound as very poorly crystallized iron hydroxide. Pyrite is present in only very small amounts. We assume that the copper is bound mostly as sulfide, while the zinc is most likely present in an other form. The sulfur-isotope-investigations indicate that the sulfur in the sediment, bound as pyrite and sulfides, is not a result of bacterical sulfate-reduction in the iron-rich mud of the Atlantis II-Deep, but must have been brought up with the hot brine.

Grain-size analysis of surface sediments, continental margin off NW Africa

The terrigenous fraction of seabed sediments recovered along the north-west African continental margin illustrates spatial variability in grain size attributed to different transport mechanisms. Three subpopulations are determined from the grain-size analyses (n = 78) of the carbonate-free silt fraction applying an end-member modelling algorithm (G. J. Weltje, 1997). The two coarsest end-members are interpreted as representing aeolian dust, and the fine-grained end-member is related to fluvial supply. The end-member model thus allows aeolian fallout to be distinguished from fluvial-sourced mud in this area. The relative contributions of the end-members show distinct regional variations that can be related to different transport processes and pathways. Understanding present-day sediment dispersal and mixing is important for a better understanding of older sedimentary records and palaeoclimate reconstructions in the region.

(Des)igualdades de Género nas Organizações de Trabalho: o caso de uma autarquia local

Em Portugal, cerca de duas centenas de organizações estão empenhadas a criar e implementar Planos para a igualdade de homens e mulheres. Entre elas estão empresas públicas e privadas, autarquias, associações empresariais, organizações do setor terciário, associações de desenvolvimento, universidades, ministérios e outros departamentos governativos. A pesquisa que aqui se expõe inscreveu-se num projeto mais amplo de diagnóstico em realização na Câmara Municipal da Lousã, que se encontra a promover um Plano Municipal para a Igualdade. Nesse âmbito mostrou-se necessário fazer um diagnóstico interno à organização com uma perspetiva de género, quer em termos de desigualdades de género na composição e situação dos seus efetivos quer de forma a conhecer as representações das pessoas que trabalham na autarquia, em torno do fenómeno da (des)igualdade de mulheres e homens. Para a sua realização foi feita análise estatística a dados fornecidos pela organização, e aplicou-se um inquérito por questionário ao pessoal ao serviço da autarquia. Concluiu-se que estamos na presença do fenómeno da desigualdade em função do sexo na estrutura da organização traduzida pela segregação ocupacional e segregação vertical, sendo os homens que apresentam os maiores níveis de antiguidade, que justificarão, de certa forma, as disparidades salariais existentes. Confirmamos uma dualidade entre o ideal de mulher como mãe e dona-de-casa e o de mulher como pessoa independente, especialmente quando são evocadas as consequências da sua atividade profissional sobre os/as filhos/as e a vida familiar. O papel de cuidar surge assim como o obstáculo a conceções menos tradicionalistas e individualizadoras da identidade feminina que nos remete para uma mudança na atribuição do lugar social de homens e mulheres dentro e fora da família. Sobressai a valorização e enfatização da maternidade e do cuidado das crianças na identidade feminina; ao passo que aos homens se atribui uma maior valorização da atividade profissional. Esta constatação comprova a ambivalência e dicotomia de valores e atitudes entre uma fuga à convencional polarização entre papéis “masculinos” e “femininos” rígida e estereotipadamente definidos. / In Portugal, about two hundred organizations are committed to create and implement plans for men and women’s equality. These include public and private companies, local authorities, business associations, third sector organizations, development associations, universities, ministries and other governmental departments. The research exposed here is part of a broader diagnostic project taking placa in the City Hall, of Lousã which is promoting a Municipal Plan for Equality. In this context it was necessary to make an internal diagnosis to the organization from a perspective of gender, either in terms of gender inequalities in the composition and status of their workers or in order to know the workers representations around the phenomenon of women and men’s equality. To make it passible the organization provided statistical data which was analysed and subsequentaly a questionnaire was applied to the municipality staff. We concluded that there is the phenomenon of gender inequality in the structure of the organization namely occupational/professional segregation and vertical segregation, - men having the highest levels of seniority, which may justify in some way the existing wage gap. The study confirms a duality between the ideal of woman as a mother and housewife and the woman as an independent person, especially when the consequences suggested are related to their professional activity on their children and life family. The role of caring emerges as the obstacle to less traditionalist conceptions of female identity and individualization, which leads us to talk about a change of the social position of men and women within and outside the family. It points out the valuation and emphasizing of motherhood and care in female identity, whereas men are given a greater appreciation of the professional activity. This conclusion confirms the ambivalence and dichotomy of values and attitudes between escape from the conventional polarization between rigid and stereotypically defined roles of "male" and "female".

Yrkesverksamma högstadielärares syn på det fria skolvalet utifrån ett segregations- och mångfaldsperspektiv

Den här uppsatsen behandlar det fria skolvalet ur ett mångfalds- och segregationsperspektiv där yrkesverksamma högstadielärare har intervjuats angående hur de upplever att det fria skolvalet påverkar den svenska skolan ur ett segregations- och mångfaldsperspektiv. Studien har varit kvalitativ och har använt sig av intervjuer som empirisk insamlingsmetod. Empirin har presenterats för att sedan analyseras med hjälp av två analysverktyg: Rational Choice Theory och Strukturalism. Lärarna upplevde det fria skolvalet som en påverkansfaktor utifrån både ett segregations- och mångfaldsperspektiv, där det fria skolvalet inte enbart har varit negativt.

Production de la sécurité, rationalité et gouvernance locale : une ethnographie urbaine à Douala et Yaoundé (Cameroun)

Cette thèse se penche sur la rationalité sécuritaire qui organise les villes de Douala et Yaoundé. En effet, l’insécurité urbaine devient une question très préoccupante, encore plus dans les villes des pays du Sud notamment les villes camerounaises où la recrudescence de la criminalité et de la violence ont donné lieu à des initiatives de sécurisation de la part de l’État et de la population. Sur le plan de la théorie, plusieurs approches nous permettent de nous projeter dans l’environnement sécuritaire des villes à l’étude. Nous considérons les villes de Douala et Yaoundé comme des lieux de production culturelle où se construisent à la faveur des migrations, à partir de diverses cultures et de comportements issus des villages d’origine, des formes d’identités hybrides et des territoires urbains diversifiés. Cela donne donc à réfléchir sur les modes de gouvernance locale, à l’échelle des quartiers, dans le but de comprendre les modalités d’encadrement de cette dynamique culturelle urbaine. Dans le même ordre d’idées, la gouvernance locale fait appel aux acteurs, dans leurs rôles et leurs logiques. Ces logiques s’observent dans leurs dimensions cognitives et leurs rapports avec l’espace. Les dimensions cognitives évoquent les perceptions, le vécu et les représentations subjectives qui sont associées à l’insécurité. Ainsi, le sentiment d’insécurité, la peur, la marginalisation, la violence et la criminalisation sont des phénomènes qui laissent entrevoir des populations défavorisées, victimes d’insécurité. C’est à côté de ces dernières que se manifestent les logiques d’acteurs associées à l’espace, qui ouvrent l’observation sur l’informalité et la ségrégation non seulement comme instruments de contrôle de l’espace urbain, mais également comme cadres de production d’espaces sécurisés. L’informalité et la ségrégation sont aussi favorables au développement des identités, à la construction d’utopies, ces visions mélioratives qui motivent et transforment les acteurs. Ce sont ces logiques d’acteurs dans leurs rapports avec l’espace qui justifient les initiatives de sécurisation. Finalement, c’est dans cette dynamique de transformation que les acteurs entrent en processus de subjectivation pour se produire comme sujets. Sur le plan méthodologique, cette thèse repose sur une ethnographie critique et comparative de la sécurité et sur l’approche de l’action sociale, qui invite à s’attarder aux interactions sociales, pour rendre compte de la rationalité sécuritaire. Étudier la sécurité requiert de s’attarder à l’échelle des quartiers, objets principaux de la sécurisation et espaces d’expression de l’informalité. Les quartiers sont encadrés par les chefferies urbaines, dont les systèmes de gestion constituent la gouvernance locale. Face à la question de la sécurité, cette gouvernance se prononce entre autres en fonction de son identité, de sa culture et de ses représentations. Elle côtoie les logiques étatiques dont les techniques et les stratégies d’organisation matérialisent les politiques de sécurité. Douala et Yaoundé présentent des approches populaires de sécurisation qui diffèrent sur le plan de l’organisation locale des quartiers et du tempérament populaire. Elles se rapprochent par les logiques d’acteurs et la motivation que ces derniers ont à se produire en sujets. La recherche a permis de constater qu’une forme de rationalité régit l’ensemble des dynamiques et des stratégies de production de la sécurité qui ont cours à Douala et Yaoundé. Cette rationalité passe par une pluralité de logiques de sécurité, elles-mêmes tributaires de nombreux phénomènes qui contribuent à la production de l’insécurité, mais aussi à celle de la sécurité. En effet, les migrations de la campagne vers la ville, l’informalité, la ségrégation et la présence de gangs locaux sont des réalités urbaines qui donnent une forme particulière à l’insécurité, mais invitent également à une réadaptation des techniques et des groupes d’acteurs impliqués dans la production de la sécurité. Il ressort que la rationalité sécuritaire, cette intelligence de gouvernement qui s’organise dans les dispositifs de l’offre publique de sécurité, suscite aussi dans les procédés des acteurs populaires, des techniques d’identification aux forces de l’ordre. Dans son processus, elle aboutit à la production de sujets sécurisés et de sécurité. En saisissant les productions humaines comme des activités innovantes, nous comprenons que la sécurisation procède par rapprochement entre les forces de l’ordre et les populations, par la mise en oeuvre de mécanismes mis en place pour répondre à la menace mais aussi par la « confiscation de la sécurité » pour les besoins d’une élite. Ensuite, elle représente une instance de subjectivation où l’innovation se matérialise et où les acteurs se réalisent, créent la sécurité et recréent la ville. Finalement, cette thèse révèle une pluralité de logiques de sécurité construites autour d’une même rationalité sécuritaire.

Regulation of mitotic BubR1 phosphorylation by the BubR1 pseudokinase domain

BubR1 est une protéine importante dans le point de contrôle de la mitose pour la stabilisation des interactions entre kinétochores et microtubules (KT-MT). Ces fonctions protègent de la ségrégation anormale des chromosomes et de l’instabilité du génome. BubR1 possède des sites de phosphorylation mitotique hautement conservés dans le domaine régulant l’attachement des kinétochores (KARD), où S676 et S670 sont phosphorylées respectivement par la kinase polo-like 1 (Plk1) et par la kinase cycline-dépendante 1 (Cdk1). Ces sites de phosphorylation sont essentiels pour le recrutement de la phosphatase PP2A-B56, qui stabilise les interactions KT-MT. Nos résultats montrent que la délétion entière ou des mutations qui déstabilisent le domaine pseudokinase de BubR1, causent la perte de phosphorylation des résidus S676 et S670 en mitose. Notre hypothèse est que le domaine pseudokinase de BubR1 peut jouer un rôle essentiel dans la régulation de la phosphorylation du KARD et donc dans la stabilisation des interactions KT-MT.

Validación de la simulación numérica del flujo bifásico hidrodinámico en sistemas de lecho fluido

Este trabajo tiene como objetivo la mejora en la validación de la simulación numérica del flujo bifásico característico del transporte de lecho fluido, mediante la formulación y desarrollo de un modelo numérico combinado Volúmenes Finitos - Elementos Finitos. Para ello se simula numéricamente el flujo de mezcla sólido-gas en una Cámara de Lecho Fluido, bajo implementación en código COMSOL, cuyos resultados son mejores comparativamente a un modelo basado en el método de Elementos Discretos implementado en código abierto MFIX. El problema fundamental de la modelización matemática del fenómeno de lecho fluido es la irregularidad del dominio, el acoplamiento de las variables en espacio y tiempo y, la no linealidad. En esta investigación se reformula apropiadamente las ecuaciones conservativas del fenómeno, tales que permitan obtener un problema variacional equivalente y solucionable numéricamente. Entonces; se define una ecuación de estado en función de la presión hidrodinámica y la fracción volumétrica de sólidos, quedando desacoplado el sistema en tres sub-problemas, garantizando así la existencia de solución del problema general. Una vez aproximados numéricamente ambos modelos, se comparan los resultados de donde se observa que el modelo materia del presente artículo, verifica de forma más eficaz las condiciones de mezcla óptima, reflejada en la calidad del burbujeo y velocidad de mezcla.

High Precision Plasma Etch for Pattern Transfer: Towards Fluorocarbon Based Atomic Layer Etching

A basic requirement of a plasma etching process is fidelity of the patterned organic materials. In photolithography, a He plasma pretreatment (PPT) based on high ultraviolet and vacuum ultraviolet (UV/VUV) exposure was shown to be successful for roughness reduction of 193nm photoresist (PR). Typical multilayer masks consist of many other organic masking materials in addition to 193nm PR. These materials vary significantly in UV/VUV sensitivity and show, therefore, a different response to the He PPT. A delamination of the nanometer-thin, ion-induced dense amorphous carbon (DAC) layer was observed. Extensive He PPT exposure produces volatile species through UV/VUV induced scissioning. These species are trapped underneath the DAC layer in a subsequent plasma etch (PE), causing a loss of adhesion. Next to stabilizing organic materials, the major goals of this work included to establish and evaluate a cyclic fluorocarbon (FC) based approach for atomic layer etching (ALE) of SiO2 and Si; to characterize the mechanisms involved; and to evaluate the impact of processing parameters. Periodic, short precursor injections allow precise deposition of thin FC films. These films limit the amount of available chemical etchant during subsequent low energy, plasma-based Ar+ ion bombardment, resulting in strongly time-dependent etch rates. In situ ellipsometry showcased the self-limited etching. X-ray photoelectron spectroscopy (XPS) confirms FC film deposition and mixing with the substrate. The cyclic ALE approach is also able to precisely etch Si substrates. A reduced time-dependent etching is seen for Si, likely based on a lower physical sputtering energy threshold. A fluorinated, oxidized surface layer is present during ALE of Si and greatly influences the etch behavior. A reaction of the precursor with the fluorinated substrate upon precursor injection was observed and characterized. The cyclic ALE approach is transferred to a manufacturing scale reactor at IBM Research. Ensuring the transferability to industrial device patterning is crucial for the application of ALE. In addition to device patterning, the cyclic ALE process is employed for oxide removal from Si and SiGe surfaces with the goal of minimal substrate damage and surface residues. The ALE process developed for SiO2 and Si etching did not remove native oxide at the level required. Optimizing the process enabled strong O removal from the surface. Subsequent 90% H2/Ar plasma allow for removal of C and F residues.

Os limites da gentrificação na vila planalto

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Arquitetura e Urbanismo, Programa de Pós-Graduação em Arquitetura e Urbanismo, 2015.

Adaptive coatings based on polyaniline for direct 2D observation of diffusion processes in microfluidic systems

[EN] Therefore the understanding and proper evaluation of the flow and mixing behaviour at microscale becomes a very important issue. In this study, the diffusion behaviour of two reacting solutions of HCI and NaOH were directly observed in a glass/polydimethylsiloxane microfluidic device using adaptive coatings based on the conductive polymer polyaniline that are covalently attached to the microchannel walls. The two liquid streams were combined at the junction of a Y-shaped microchannel, and allowed to diffuse into each other and react. The results showed excellent correlation between optical observation of the diffusion process and the numerical results. A numerical model which is based on finite volume method (FVM) discretisation of steady Navier-Stokes (fluid flow) equations and mass transport equations without reactions was used to calculate the flow variables at discrete points in the finite volume mesh element. The high correlation between theory and practical data indicates the potential of such coatings to monitor diffusion processes and mixing behaviour inside microfluidic channels in a dye free environment.

Novos Meisho

Dissertação para obtenção do grau de Mestre em Arquitectura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Compósitos de matriz metálica à base níquel com adição de TaC e NbC produzidos via metalurgia do pó

Carbide reinforced metallic alloys potentially improve some important mechanical properties required for the overall use of important engineering materials such as steel and nickel. Nevertheless, improved performance is achieved not only by composition enhancement but also by adequate processing techniques, such as novel sintering methods in the case of powder metallurgy. The method minimizes energy losses in addition to providing uniform heating during sintering. Thus, the general objective of this study was to evaluate the density, hardness, flexural strength, dilatometric behavior and to analyze the microstructure of metal matrix composites based nickel with addition of carbides of tantalum and / or niobium when sintered in a conventional furnace and Plasma assisted debinding and sintering (PADS). Initially, were defineds best parameters of granulation, screening and mixing procedure. After, mixtures of carbonyl Ni and 5%, 10% and 15 wt.% NbC and TaC were prepared in a Y-type mixer under wet conditions during 60 minutes. The mixtures were then dried and granulated using 1.5 wt. % paraffin diluted in hexane. Granulates were cold pressed under 600 MPa. Paraffin was then removed from the pressed pellets during a pre-sintering process carried out in a tubular furnace at 500 °C during 30 min. The heating rate was 3 ºC/min. The pellets were then sintered using either a plasma assisted reactor or a conventional resistive tubular furnace. For both methods, the heating rate was set to 8 ºC/min up to 1150 °C. The holding time was 60 minutes. The microstructure of the sintered samples was evaluated by SEM. Brinell hardness tests were also carried out. The results revealed that higher density and higher hardness values were observed in the plasma-assisted sintered samples. Hardness increased with the concentration of carbides in the Ni-matrix. The flexural strength also increased by adding the carbides. The decline was larger for the sample with addition of 5% 5% TaC and NbC. In general, compositions containing added carbide 10% showed less porous and more uniform distribution of carbides in the nickel matrix microstructural appearance. Thus, both added carbide and plasma sintering improved density, hardness, flexural strength and microstructural appearance of the composites

Estudo paramétrico da segregação gravitacional na injeção contínua de vapor

Steam injection is the most used method of additional recovery for the extraction of heavy oil. In this type procedure is common to happen gravitational segregation and this phenomenon can affect the production of oil and therefore, it shoulds be considered in the projects of continuous steam injection. For many years, the gravitational segregation was not adequately considered in the calculation procedures in Reservoir Engineering. The effect of the gravity causes the segregation of fluids inside the porous media according to their densities. The results of simulation arising from reservoirs could provide the ability to deal with the gravity, and it became apparent that the effects of the gravity could significantly affect the performance of the reservoir. It know that the gravitational segregation can happen in almost every case where there is injection of light fluid, specially the steam, and occurs with greater intensity for viscous oil reservoirs. This work discusses the influence of some parameters of the rock-reservoir in segregation as viscosity, permeability, thickness, cover gas, porosity. From a model that shows the phenomenon with greater intensity, optimized some operational parameters as the rate flow rate steam, distance between the wells injector-producer, and interval of completion which contributed to the reduction in gravity override, thus increasing the oil recovery. It was shown a greater technical-economic viability for the model of distance between the wells 100 m. The analysis was performed using the simulator of CMG (Computer Modeling Group-Stars 2007.11, in which was observed by iterating between studied variables in heavy oil reservoirs with similar characteristics to Brazilian Northeast

Hidrocarbonetos policíclicos aromáticos em sedimentos de fundo do estuário do rio Potengi, região da grande Natal (RN): implicações ambientais

Estuaries are environments prone to the input of chemical pollutants of various kinds and origins, including polycyclic aromatic hydrocarbons (PAHs). Anthropogenic PAHs may have two possible sources: pyrolytic (with four or more aromatic rings and low degree of alkylation) and petrogenic (with two and three aromatic rings and high degree of alkylation). This study aimed to evaluate the levels, distribution and possible sources of polycyclic aromatic hydrocarbons in the estuary of the Potengi river, Natal, Brazil. Samples of bottom sediments were collected in the final 12 km of the estuary until its mouth to the sea, where the urbanization of the Great Natal is more concentrated. Sampling was performed on 12 cross sections, with three stations each, totaling 36 samples, identified as T1 to T36. The non alkylated and alkylated PAHs were analyzed by gas chromatography coupled to mass spectrometry (GC / MS). PAHs were detected in all 36 stations with total concentration on each varying 174-109407 ng g-1. These values are comparable to those of several estuarine regions worldwide with high anthropogenic influence, suggesting the record of diffuse contamination installed in the estuary. PAHs profiles were similar for most stations. In 32 of the 36 stations, low molecular weight PAHs (with 2 and 3 ring: naphthalene, phenanthrene and their alkylated homologues) prevailed, which ranged from 54% to 100% of the total PAH, indicating that leaks, spills and combustion fuels are the dominant source of PAH pollution in the estuary. The level of contamination by PAHs in most stations suggests that there is potential risk of occasional adverse biological effects, but in some stations adverse impacts on the biota may occur frequently. The diagnostic ratios could differentiate sources of PAHs in sediments of the estuary, which were divided into three groups: petrogenic, pyrolytic and mixing of sources. The urban concentration of the Great Natal and the various industrial activities associated with it can be blamed as potential sources of PAHs in bottom sediments of the estuary studied. The data presented highlight the need to control the causes of existing pollution in the estuary