Production of a product similar to gelatin from chicken feet collagen

Chicken feet can be used as an alternative source of collagen for the development of new products. In this sense, the aim of this study was the production of a product similar to gelatin from collagen extracted from chicken feet and the evaluation of sensory quality. The products were produced in two distinct flavors, with grape flavor called GU and pineapple flavor called GA. Subsequently, we compared these formulations with gelatin of a trademark established in the market. We used in the verification of sensory acceptability of products a hedonic scale of 9 points and the availability of consuming the product by 30 untrained tasters. According to the results, all formulations showed good levels of acceptability, indicating the collagen from chicken feet as an alternative source of high quality in the production of gelatin.

Low-flow estimates in regions of extrapolation of the regionalization equations: a new concept

ABSTRACT Knowledge of natural water availability, which is characterized by low flows, is essential for planning and management of water resources. One of the most widely used hydrological techniques to determine streamflow is regionalization, but the extrapolation of regionalization equations beyond the limits of sample data is not recommended. This paper proposes a new method for reducing overestimation errors associated with the extrapolation of regionalization equations for low flows. The method is based on the use of a threshold value for the maximum specific low flow discharge estimated at the gauging sites that are used in the regionalization. When a specific low flow, which has been estimated using the regionalization equation, exceeds the threshold value, the low flow can be obtained by multiplying the drainage area by the threshold value. This restriction imposes a physical limit to the low flow, which reduces the error of overestimating flows in regions of extrapolation. A case study was done in the Urucuia river basin, in Brazil, and the results showed the regionalization equation to perform positively in reducing the risk of extrapolation.

Innovaatioprosessin alkupään toimintamalli ja päätöksenteko

Työn tavoitteena oli tutkia innovaatioita ja organisaation innovaatiokyvykkyyttä, innovaatiokyvykkyyden taustatekijöitä sekä innovaatioprosessin alkupään (Fuzzy Front End, FFE) sekä siinä tapahtuvan päätöksenteon johtamista. Lisäksi tavoitteena oli suunnitella innovaatioprosessin alkupään toimintamalli selkeyttämään toimintaa prosessin alkupäässä sekä antaa toimenpide-ehdotuksia ja suosituksia. Tutkimuksen teoriaosuus tehtiin kirjallisuustutkimuksena. Tutkimuksen empiirinen osuus suoritettiin case -analyysinä yrityksen henkilöhaastattelu- ja toimintatutkimuksen muodossa. Innovaatioprosessin alkupäähän on tunnistettu toimintamalleja, joilla selkeytetään ja tehostetaan prosessin alkupään vaiheita. Vaiheet ovat mahdollisuuksien tunnistaminen, mahdollisuuksien analysointi, ideointi, ideoiden valitseminen ja konsepti- ja teknologiakehitys. Innovaatioprosessin rinnalla kulkee päätöksenteon prosessi, jonka suhteen tunnistetaan selkeät päätöksentekokohdat ja kriteerit prosessissa etenemiselle. Innovaatio- ja päätöksentekoprosessiin osallistuu eri vaiheissa sekä yrityksen sisäiset, kuten henkilöstö, että ulkoiset, kuten asiakkaat, toimittajat ja verkostokumppanit, sidosryhmät. Lisäksi innovaatioprosessin toimintaan vaikuttavat johdon tuki ja sitoutuminen, osallistujien kyky luovuuteen sekä muut innovaatiokyvykkyyden taustatekijät. Kaikki nämä tekijät tulee huomioida innovaatioprosessin alkupään mallia suunniteltaessa. Tutkimus tehtiin tietoliikennealan yrityksen tarpeisiin. Yrityksessä on käytössä aloitetoimintaa, mutta sen ei koeta tarjoavan riittävästi ideoita yrityksen tuotekehityksen tarpeisiin. Yrityksen henkilöstön innovaatiopotentiaali on suuri, mikä halutaan hyödyntää paremmin suunnittelemalla yrityksen käyttöön soveltuva, innovaatioprosessin alkupään toimintaan ohjaava, vakioitu ja henkilöstöä ja muita yhteistyötahoja, kuten asiakkaita, osallistava toimintamalli. Toimenpide-ehdotuksina ja suosituksina esitetään innovaatioprosessin alkupään johtamisen toimintamallia. Esitetyssä mallissa määritellään vaiheet, menetelmät, päätöksenteko ja vastuut. Toimintamalli esitetään soveltuen yhdistettäväksi yrityksessä käytössä olevaan innovaatioprosessin loppupään, tuotekehitysprojektien läpiviemisen, malliin.

Streamlining Launch Support Operations in a Product Platform

The new product development process is a massive investment to a company that aims to reduce their products’ time-to-market. Capability to shorter time-to market allows longer life-cycle to products which are introduced to market earlier but also give advantage to start product launch later while simultaneously learning from customer behavior and competitors. The product launch support operations are the last ramp-up activities before the product launching. This study defines what these operations mean in a product platform and how they can be streamlined to be more efficient. The methodology includes interviews, innovative group brainstorming and regular working group meetings. The challenges concerning the current situation of product launch support operations are allocated into four categories: General, Process, Project Resources and Project Management including altogether ten sub challenges. The challenges include issues related to technology and marketing management, branding strategy, organizing the global platform structure, harmonizing processes and clarifying handovers between shareholders in the process. The study makes a suggestion of a new Product Launch Support organization and clarification of its roles, responsibilities and tasks. In addition a new project management tool and Lessons Learned are suggested to improve the project management. The study can be seen as a pre-study when having an aim at combining technological and marketing know-how in the product ramp-up process before actual production. The future proceedings are suggested to include more detailed specifications and implementation in order to reach the long range target, reduced the time-to-market.

Making Sense of Software Product Requirements

One of the most crucial tasks for a company offering a software product is to decide what new features should be implemented in the product’s forthcoming versions. Yet, existing studies show that this is also a task with which many companies are struggling. This problem has been claimed to be ambiguous and changing. There are better or worse solutions to the problem, but no optimal one. Furthermore, the criteria determining the success of the solution keeps changing due to continuously changing competition, technologies and market needs. This thesis seeks to gain a deeper understanding of the challenges that companies have reportedly faced in determining the requirements for their forthcoming product versions. To this end, product management related activities are explored in seven companies. Following grounded theory approach, the thesis conducts four iterations of data analysis, where each of the iterations goes beyond the previous one. The thesis results in a theory proposal intended to 1) describe the essential characteristics of organizations’ product management challenges, 2) explain the origins of the perceived challenges and 3) suggest strategies to alleviate the perceived challenges. The thesis concludes that current product management approaches are becoming inadequate to deal with challenges that have multiple and conflicting interpretations, different value orientations, unclear goals, contradictions and paradoxes. This inadequacy continues to increase until current beliefs and assumptions about the product management challenges are questioned and a new paradigm for dealing with the challenges is adopted.

A Case Study of Agile Software Engineering Methods and Practices in the MeeGo Harmattan Open Source and Product Context

The aim of this master’s thesis is to study how Agile method (Scrum) and open source software are utilized to produce software for a flagship product in a complex production environment. The empirical case and the used artefacts are taken from the Nokia MeeGo N9 product program, and from the related software program, called as the Harmattan. The single research case is analysed by using a qualitative method. The Grounded Theory principles are utilized, first, to find out all the related concepts from artefacts. Second, these concepts are analysed, and finally categorized to a core category and six supported categories. The result is formulated as the operation of software practices conceivable in circumstances, where the accountable software development teams and related context accepts a open source software nature as a part of business vision and the whole organization supports the Agile methods.

Worker motivation in crowdsourcing new product development

In the study the recently appeared technology of crowdsourcing and its implications to new product development activities. The goal of the research is to figure out the motivating factors used in crowdsourcing projects related to new product development. The study is based on the theoretical backgrounds of crowdsourcing; new product development, and motivation, which resulted in the framework for the crowdsourcing cases assessment and the list of possible motivating factors used for the analysis. The research is based on 16 crowdsourcing projects divided in 4 sets according to the stage of new product development at which they are directed. The motivating factors present in the projects were distinguished and explained. Further analysis allowed making conclusions showing which of the motivating factors are suitable for the crowdsourcing projects related to the particular stage of new product development. The results can be used for creation or assessment of crowdsourcing projects for the companies because the main factor of success for crowdsourcing is motivation, and the work is answering how to motivate the workers.

Externally excited synchronous machine: Testing the automation concept

This bachelor’s thesis is a part of the research project realized in the summer 2011 in Lappeenranta University of Technology. The goal of the project was to develop an automation concept for controlling the externally excited synchronous motor. Thesis concentrates on the testing planning and testing the system. Testing plan was made for three sectors: For the PLC program testing, for the communication testing and for the whole system testing. PLC program was tested with white box and destructive methods. Communication testing was done by switching maximum com-munication speed and checked if communication was reliable. Whole system testing included among other things speed and torque controlling. The system was tested with exploratory testing also. This enabled more reliable and broader testing than with systematical testing only.

Automation concept for an electrically excited synchronous motor: Setup and requirements specification

This bachelor’s thesis is a part of the research project realized in the summer 2011 in Lappeenranta University of Technology. The goal of the project was to create an automation concept for controlling an electrically excited synchronous motor. This thesis concentrates on the setup and requirements specification part of the concept. The setup consists of ABB AC500 as the PLC master device, DCS800 as an exciter and ACS800 as a frequency converter. The ACS800 frequency converter uses permanent magnet synchronous machine software to control the stator’s magnetic field, the DC drive handles the excitation and the AC500 PLC master controls the communication and functionality of the system. The requirements specification briefly explains the general over-view of the concept, the use and functionality of the PLC program and the requirements needed for the whole concept and the PLC program to work as intended.

Stretching a service concept brand

Brands have become one of the most valuable assets for organizations, which is why organizations want to benefit from them in whole scale. However, service concept brands are still little researched. The purpose of this research is to study how brand stretching and co-branding strategies can help a service concept brand to attain wider target market. More specifically, this research aims to contribute the methods and their risks and benefits to different customer levels of a group fitness brand. This study is a qualitative single case analysis embedded with multiple units of analysis. The data used in this study was gathered by nine theme interviews. The interviewees are from one of the customer levels of the service concept provided by the case organization. The interviews are made in different geographical areas in Finland. The results of the study will clarify and illustrate the differences and similarities between the theoretical framework and practise. Several differences between traditional brand stretching and co-branding strategies and those that are possible to employ by a service concept brand were found. The answers of the interviewees were slightly different depending on their role in the organization and their experience from the branch. However, they proved that not all brand stretching or co-branding strategies are applicable in the group fitness brand. Nevertheless, also several similarities that benefit the group fitness brand were found.

Integration in project business : mechanisms for integrating customers and the project network during the life-cycle of industrial projects

This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.

Improving product profitability control in continuous IT-services

The target of the thesis is to improve product profitability control in continuous IT-services. Accurate product cost accounting and correctly allocated revenues are a necessity for good product profitability control. The focus of the study is on costs and revenues that are not traced directly to services. The thesis is focused on revenue allocations as revenue allocation methods have not been used in the case company before. In order to achieve the target revenue allocation methods, which improve the product profitability accounting and control, are presented. The research methods used in the thesis are literature review and empirical case study. The research approach is constructive. The theoretical part is composed of literature and articles that create a base for the empirical part. Internal interviews describe the current situation in the company and based on it development actions are planned. The part of the empirical case study is seen mostly in the limitations as the research is limited to concern only one department in the company. Problems in the revenue tracing are caused by customer specific services and lack of service definitions because of which the revenues are not traced correctly. Methods to allocate revenues are presented in the thesis and stand-alone revenue allocation method is the most suitable one because it is fair and it can be modified. Approximate product profitability analysis is done in the thesis and the results of it indicate that some services are profitable and some unprofitable.

Anodivalimon kokoonpanon läpimenoajan lyhentäminen

Tutkimuksen tarkoituksena oli löytää menetelmiä tuotteen kokoonpantavuuden kehittämiseen ja parantaa sitä DFMA-ajattelun sekä Lean–filosofian avulla. Työn teoreettisessa osuudessa tarkasteltiin läpimenoajan käsitettä ja käytettävissä olevien resurssien merkitystä. Lisäksi tarkastelun kohteena oli DFMA:n hyödyntäminen kokoonpanon nopeuttamisessa sekä Lean–filosofian hyödyntäminen tuotantoprosessin kehittämiseksi. Empiirinen osuus kohdentui Outotec Turula Oy:n anodivalimon kokoonpanossa ilmenneisiin ongelmiin ja niiden poistamiseen. Tutkimuksella saatiin selvitettyä resurssien ja osaamisen merkitys valmistusprosessin kehittämisen turvaamisessa. DFMA:n ja Lean:in avulla on mahdollista löytää toimintatapoja, joiden avulla anodivalimon kokoonpanon läpimenoaikaa on mahdollista lyhentää.

Simulation and optimization tools in paper machine concept design

The last decade has shown that the global paper industry needs new processes and products in order to reassert its position in the industry. As the paper markets in Western Europe and North America have stabilized, the competition has tightened. Along with the development of more cost-effective processes and products, new process design methods are also required to break the old molds and create new ideas. This thesis discusses the development of a process design methodology based on simulation and optimization methods. A bi-level optimization problem and a solution procedure for it are formulated and illustrated. Computational models and simulation are used to illustrate the phenomena inside a real process and mathematical optimization is exploited to find out the best process structures and control principles for the process. Dynamic process models are used inside the bi-level optimization problem, which is assumed to be dynamic and multiobjective due to the nature of papermaking processes. The numerical experiments show that the bi-level optimization approach is useful for different kinds of problems related to process design and optimization. Here, the design methodology is applied to a constrained process area of a papermaking line. However, the same methodology is applicable to all types of industrial processes, e.g., the design of biorefiners, because the methodology is totally generalized and can be easily modified.

Application of the scrum framework in non-software project management

Scrum is an agile project management approach that has been widely practiced in the software development projects. It has proven to increase quality, productivity, customer satisfaction, transparency and team morale among other benefits from its implementation. The concept of scrum is based on the concepts of incremental innovation strategies, lean manufacturing, kaizen, iterative development and so on and is usually contrasted with the linear development models such as the waterfall method in the software industry. The traditional approaches to project management such as the waterfall method imply intensive upfront planning and approval of the entire project. These sort of approaches work well in the well-defined stable environments where all the specifications of the project are known in the beginning. However, in the uncertain environments when a project requires continuous development and incorporation of new requirements, they do not tend to work well. The scrum framework was inspiraed by Nonaka’s article about new product developement and was later adopted by software development practitioners. This research explores conditions for and benefits of the application of scrum framework beyond software development projects. There are currently a few case studies on the scrum implementation in non-software projects, but there is a noticeable trend of it in the scrum practitioners’ community. The research is based on the real-life context multiple case study analysis of three different non-software projects. The results of the research showed that in order to succeed within scrum projects need to satisfy certain conditions – necessary and sufficient. Among them the key factors are uncertainty of the project environment, not well defined outcomes, commitment of the scrum teams and management support. The top advantages of scrum implementation identified in the present research include improved transparency, accountability, team morale, communications, cooperation and collaboration. Further researches are advised to be carried out in order to validate these findings on a larger sample and to focus on more specific areas of scrum project management implementation.