BUSINESS CONCEPTS OF MOBILE VALUE-ADDED SERVICES FROM OPERATOR’S POINT OF VIEW

Tämä diplomityö on tehty Lappeenrannassa Telecom Business Research Centerin 5T-projektiin liittyen. Työssä tutkitaan matkaviestinnän lisäarvopalveluiden liiketoimintakonsepteja operaattoreiden näkökulmasta. Lisäarvopalvelut laajentavat operaattoreiden palveluvalikoimaa. Niiden osuuden telekommunikaatioalan yritysten ja erityisesti operaattoreiden tuotoista on ennustettu kasvavan huomattavasti. Työn tärkeimpänä tavoitteena on tuoda uusia näkökulmia ja lisätä ymmärrystä lisäarvopalveluiden liiketoimintakonseptin rakentamisprosessista. Tätä tietämystä käytetään edesauttamaan työn empiirisessä osuudessa tutkitun Content Gateway -tuotteen liiketoimintaa. Tarjoamalla nopean liitynnän ja laskutuskanavan ulkopuolisten palveluntarjoajien ja operaattorin välille tämä tuote mahdollistaa operaattorille ja palveluntarjoajille lisäarvopalveluiden liiketoiminnan käynnistämisen. Lisäarvopalveluiden arvonluontiprosessi vaatii lukuisia yhteistyötä tekeviä osapuolia, joiden yhteistoiminta on dynaamista ja tiedonvälitys avointa, interaktiivista ja nopeaa. Arvonluontiin liittyy myös monia konvergoituvia kehityssuuntia. Perinteinen arvoketjuajattelu on riittämätön uuteen, verkottuneeseen toimintaympäristöön ja sen tilalle on tullut modernimpi arvoverkostomalli. Arvoverkosto luo kilpailuetunsa muita verkostoja vastaan jakamalla resurssit ja kompetenssit optimaalisesti ja liittämällä strategisen ja operationaalisen johtamisen kulttuurit toisiinsa. Tässä työssä verrataan arvoverkoston teoreettisia tavoitteita kahteen lisäarvopalveluiden liiketoimintakonseptiin. Näistä ensimmäinen, i-mode –niminen konsepti on valittu vertailuun edistyksellisyytensä ja tulevaa kehitystä ennakoivien ominaispiirteidensä vuoksi. Toinen esimerkkikonsepti on rakennettu edellä mainitun Content Gateway -tuotteen ympärille. Tutkimus sisältää mm. liikekumppaneiden hankinnan, ansaintalogiikoiden ja verkostojen johtamisen analysoinnin. Työn tuloksena on saatu ohjeita siihen, miten operaattori voi rakentaa tällaista konseptia ja mitä seikkoja tulee ottaa huomioon erityisesti sanomapalveluihin liittyvässä liiketoiminnassa.

Effect of GA3, KNO3, and removing of basal point of seeds on germination of sweet granadilla (Passiflora ligularis Juss) and yellow passion fruit (Passiflora edulis f. flavicarpa)

Passiflora seeds germinate erratically presenting difficulties for their handling in a greenhouse. The effect of removing of basal point of seeds (RB) and pre-imbibition of seeds of sweet granadilla and yellow passion fruit in 50, 100, 200, and 400 mg mL-1 solutions of gibberellic acid (GA3) or 0.1% KNO3 solution was studied. The experiment was conducted in greenhouses in La Plata, Colombia. Two accessions PrJ1 and PrJ2 of sweet granadilla were evaluated. There were calculated the final percentage of germination (PG), mean germination time (MGT), and the mean germination rate (MGR). The leaf area and dry mass of seedlings were measured 22 days after sowing (das); with this data, specific leaf area and relation root/shoot were calculated. In all cases, the highest germination percentages were achieved treating seeds with KNO3 (89, 92, and 87% for yellow passion fruit, PrJ2, and PrJ1, respectively), but the increase in MGR (3.3 germinated seeds per day) and the decrease in MGT (16 days) were only significant for PrJ1. RB had a significant reduction of PG in all cases (28, 12, and 33% for passion fruit, PrJ2 and PrJ1, respectively). With the increase in the concentration of GA3, PG was reduced for two accessions of sweet granadilla, for yellow passion fruit this trend was not clear, no treatment with GA3 showed significant differences with the control. Leaf area (24.07 cm2) and dry mass of seedlings (135 mg) were significantly higher than seeds previously treated with KNO3 only for PrJ1.The solution of KNO3 0,1% is recommended to improve the germination and initial growth of granadilla seedlings.

Profit repatriation of a Polish subsidiary from tax planning point of view of an international corporation

The main purpose of this study was to examine and compare the possibilities of profit repatriation from the point of view of tax planning of an international corporation, in such a case that a Finnish parent company has a subsidiary in Poland. The main research problem was divided into two sub research problems: 1) to examine concepts and principles of international taxation and tax planning from the point of view of international corporations and 2) to discuss the main features of Polish Companies-, Accounting- and Tax Act from the point of view a Finnish parent company. The research method of this study is mainly decision making, comparative analysis. In this study have been discussed the possibilities of international profit repatriation for supporting the decision making of the management of a Finnish parent company. In addition different repatriation possibilities have been compared. In this study has been noticed that a Finnish parent company can repatriate profit of its Polish subsidiary either directly as dividends or by using indirect methods such as interests, royalties, management fees and transfer pricing of goods. The total tax burden of dividends is heavier than the tax burden of indirect methods. It was also concluded that during the last years the Polish legislation has been renewed in order to prevent hidden dividend distribution. This has been done by implementing new rules of transfer pricing and thin capitalization.

Biomarkers of Host Response Predict Primary End-Point Radiological Pneumonia in Tanzanian Children with Clinical Pneumonia: A Prospective Cohort Study.

BACKGROUND: Diagnosing pediatric pneumonia is challenging in low-resource settings. The World Health Organization (WHO) has defined primary end-point radiological pneumonia for use in epidemiological and vaccine studies. However, radiography requires expertise and is often inaccessible. We hypothesized that plasma biomarkers of inflammation and endothelial activation may be useful surrogates for end-point pneumonia, and may provide insight into its biological significance. METHODS: We studied children with WHO-defined clinical pneumonia (n = 155) within a prospective cohort of 1,005 consecutive febrile children presenting to Tanzanian outpatient clinics. Based on x-ray findings, participants were categorized as primary end-point pneumonia (n = 30), other infiltrates (n = 31), or normal chest x-ray (n = 94). Plasma levels of 7 host response biomarkers at presentation were measured by ELISA. Associations between biomarker levels and radiological findings were assessed by Kruskal-Wallis test and multivariable logistic regression. Biomarker ability to predict radiological findings was evaluated using receiver operating characteristic curve analysis and Classification and Regression Tree analysis. RESULTS: Compared to children with normal x-ray, children with end-point pneumonia had significantly higher C-reactive protein, procalcitonin and Chitinase 3-like-1, while those with other infiltrates had elevated procalcitonin and von Willebrand Factor and decreased soluble Tie-2 and endoglin. Clinical variables were not predictive of radiological findings. Classification and Regression Tree analysis generated multi-marker models with improved performance over single markers for discriminating between groups. A model based on C-reactive protein and Chitinase 3-like-1 discriminated between end-point pneumonia and non-end-point pneumonia with 93.3% sensitivity (95% confidence interval 76.5-98.8), 80.8% specificity (72.6-87.1), positive likelihood ratio 4.9 (3.4-7.1), negative likelihood ratio 0.083 (0.022-0.32), and misclassification rate 0.20 (standard error 0.038). CONCLUSIONS: In Tanzanian children with WHO-defined clinical pneumonia, combinations of host biomarkers distinguished between end-point pneumonia, other infiltrates, and normal chest x-ray, whereas clinical variables did not. These findings generate pathophysiological hypotheses and may have potential research and clinical utility.

Another Kind of Knowledge: Aristotle's Phronêsis from an Epistemological Point of View

In my thesis, I defend the idea that Aristotle's notion of phronêsis (practical wisdom) is best understood as a kind of practical knowledge. I interpret phronêsis as the knowledge we display when we make the correct decision to act. In a particular situation that demands a specific response, we have practical knowledge of what to do when we make the best decision possible. This interpretation of phronêsis involves that it is possible to evaluate our decisions epistemically, that is, to evaluate whether we really know what to do or not. Aristotle provides a tool for the evaluation of our decisions, which is a definite kind of argument and which the tradition has called the 'practical syllogism'. The practical syllogism stands as the explanation of our decisions or actions. We invoke it when we want to explain or justify why we act as we do. My claim is that the components of the practical syllogism enable one to evaluate not only the moral character of our actions, but also the epistemic strength of our decisions. Correspondingly, a decision is morally right, i.e. virtuous, if the agent considers the right moral principle to apply, and if he is aware of the relevant circumstances of the situation (moral evaluation). Moreover, a decision displays practical knowledge if the agent meets three conditions (epistemic evaluation): he must desire the moral principle for its own sake; he must have experience in spotting the relevant circumstances of the situation; and he must be able to closely connect these circumstances with the moral principle. This interpretation of phronêsis differs from other more traditional interpretations in the emphasis it puts on phronêsis as knowledge. Other interpretations focus more on the moral dimension on phronêsis, without taking its epistemic value seriously. By contrast, I raise seriously the question of what it takes to genuinely know what one should do in a particular situation. -- Dans ma thèse, je défends l'idée que la notion aristotélicienne de phronêsis (sagesse pratique) doit être interprétée comme connaissance pratique. Je comprends la phronêsis comme étant la connaissance que nous avons lorsque nous prenons une bonne décision. Dans une situation particulière qui demande une réponse précise, nous avons une connaissance pratique lorsque nous prenons la meilleure décision possible. Cette interprétation de la phronêsis implique qu'il est possible d'évaluer nos décisions de manière épistémique, c'est-à-dire, d'évaluer si nous savons vraiment ce qu'il faut faire ou non. Ma position est qu'Aristote fournit un outil pour évaluer épistémiquement nos décisions, qui consiste en un certain type d'argument et que la tradition a appelé le 'syllogisme pratique'. Le syllogisme pratique correspond à l'explication de nos décisions ou de nos actions. Nous invoquons un syllogisme pratique lorsque nous voulons expliquer ou justifier pourquoi nous agissons comme nous le faisons. Les éléments du syllogisme pratique permettent d'évaluer non seulement le caractère moral de nos actions, mais aussi la force épistémique de nos décisions. Par conséquent, une décision est moralement correcte, i.e. vertueuse, si l'agent considère le bon principe moral, et s'il est attentif aux circonstances pertinentes de la situation (évaluation morale). En outre, une décision inclut la connaissance pratique si l'agent remplit trois conditions (évaluation épistémique) : il doit désirer le principe moral pour lui-même, il doit avoir de l'expérience pour déceler les circonstances pertinentes, et il doit pouvoir lier intimement ces circonstances avec le principe moral. Cette interprétation de la phronêsis diffère d'autres interprétations plus traditionnelles par l'emphase mise sur la phronêsis en tant que connaissance. D'autres interprétations se concentrent plus sur la dimension morale de la phronêsis, sans se préoccuper sérieusement de sa valeur épistémique. Au contraire, je pose sérieusement la question des conditions nécessaires pour réellement savoir ce qu'il faut faire dans une situation donnée.

Competitor comparison: variable speed drives in pumping applications

As the world’s energy demand is increasing, a durable solution to control it is to improve the energy efficiency of the processes. It has been estimated that pumping applications have a significant potential for energy savings trough equipment or control system changes. For many pumping application the use of a variable speed drive as a process control element is the most energy efficient solution. The main target of this study is to examine the energy efficiency of a drive system that moves the pump. In a larger scale the purpose of this study is to examine how the different manufacturers’ variable speed drives are functioning as a control device of a pumping process. The idea is to compare the drives from a normal pump user’s point of view. The things that are mattering for the pump user are the efficiency gained in the process and the easiness of the use of the VSD. So some thought is given also on valuating the user-friendliness of the VSDs. The VSDs are compared to each other also on the basis of their life cycle energy costs in different kind of pumping cases. The comparison is made between ACS800 from ABB, VLT AQUA Drive from Danfoss, NX-drive from Vacon and Micromaster 430 from Siemens. The efficiencies are measured in power electronics laboratory in the Lappeenranta University of Technology with a system that consists of a variable speed drive, an induction motor with dc-machine, two power analyzers and a torque transducer. The efficiencies are measured as a function of a load at different frequencies. According to measurement results the differences between the measured system efficiencies on the actual working area of pumping are on average few percent units. When examining efficiencies at the whole range of different loads and frequencies, the differences get bigger. At low frequencies and loads the differences between the most efficient and the least efficient systems are at the most about ten percent units. At the most of the tested points ABB’s drive seem to have slightly better efficiencies than the other drives.

Rockfall susceptibility assessment and remote geological mapping with LiDAR point clouds

Characterizing the geological features and structures in three dimensions over inaccessible rock cliffs is needed to assess natural hazards such as rockfalls and rockslides and also to perform investigations aimed at mapping geological contacts and building stratigraphy and fold models. Indeed, the detailed 3D data, such as LiDAR point clouds, allow to study accurately the hazard processes and the structure of geologic features, in particular in vertical and overhanging rock slopes. Thus, 3D geological models have a great potential of being applied to a wide range of geological investigations both in research and applied geology projects, such as mines, tunnels and reservoirs. Recent development of ground-based remote sensing techniques (LiDAR, photogrammetry and multispectral / hyperspectral images) are revolutionizing the acquisition of morphological and geological information. As a consequence, there is a great potential for improving the modeling of geological bodies as well as failure mechanisms and stability conditions by integrating detailed remote data. During the past ten years several large rockfall events occurred along important transportation corridors where millions of people travel every year (Switzerland: Gotthard motorway and railway; Canada: Sea to sky highway between Vancouver and Whistler). These events show that there is still a lack of knowledge concerning the detection of potential rockfalls, making mountain residential settlements and roads highly risky. It is necessary to understand the main factors that destabilize rocky outcrops even if inventories are lacking and if no clear morphological evidences of rockfall activity are observed. In order to increase the possibilities of forecasting potential future landslides, it is crucial to understand the evolution of rock slope stability. Defining the areas theoretically most prone to rockfalls can be particularly useful to simulate trajectory profiles and to generate hazard maps, which are the basis for land use planning in mountainous regions. The most important questions to address in order to assess rockfall hazard are: Where are the most probable sources for future rockfalls located? What are the frequencies of occurrence of these rockfalls? I characterized the fracturing patterns in the field and with LiDAR point clouds. Afterwards, I developed a model to compute the failure mechanisms on terrestrial point clouds in order to assess the susceptibility to rockfalls at the cliff scale. Similar procedures were already available to evaluate the susceptibility to rockfalls based on aerial digital elevation models. This new model gives the possibility to detect the most susceptible rockfall sources with unprecented detail in the vertical and overhanging areas. The results of the computation of the most probable rockfall source areas in granitic cliffs of Yosemite Valley and Mont-Blanc massif were then compared to the inventoried rockfall events to validate the calculation methods. Yosemite Valley was chosen as a test area because it has a particularly strong rockfall activity (about one rockfall every week) which leads to a high rockfall hazard. The west face of the Dru was also chosen for the relevant rockfall activity and especially because it was affected by some of the largest rockfalls that occurred in the Alps during the last 10 years. Moreover, both areas were suitable because of their huge vertical and overhanging cliffs that are difficult to study with classical methods. Limit equilibrium models have been applied to several case studies to evaluate the effects of different parameters on the stability of rockslope areas. The impact of the degradation of rockbridges on the stability of large compartments in the west face of the Dru was assessed using finite element modeling. In particular I conducted a back-analysis of the large rockfall event of 2005 (265'000 m3) by integrating field observations of joint conditions, characteristics of fracturing pattern and results of geomechanical tests on the intact rock. These analyses improved our understanding of the factors that influence the stability of rock compartments and were used to define the most probable future rockfall volumes at the Dru. Terrestrial laser scanning point clouds were also successfully employed to perform geological mapping in 3D, using the intensity of the backscattered signal. Another technique to obtain vertical geological maps is combining triangulated TLS mesh with 2D geological maps. At El Capitan (Yosemite Valley) we built a georeferenced vertical map of the main plutonio rocks that was used to investigate the reasons for preferential rockwall retreat rate. Additional efforts to characterize the erosion rate were made at Monte Generoso (Ticino, southern Switzerland) where I attempted to improve the estimation of long term erosion by taking into account also the volumes of the unstable rock compartments. Eventually, the following points summarize the main out puts of my research: The new model to compute the failure mechanisms and the rockfall susceptibility with 3D point clouds allows to define accurately the most probable rockfall source areas at the cliff scale. The analysis of the rockbridges at the Dru shows the potential of integrating detailed measurements of the fractures in geomechanical models of rockmass stability. The correction of the LiDAR intensity signal gives the possibility to classify a point cloud according to the rock type and then use this information to model complex geologic structures. The integration of these results, on rockmass fracturing and composition, with existing methods can improve rockfall hazard assessments and enhance the interpretation of the evolution of steep rockslopes. -- La caractérisation de la géologie en 3D pour des parois rocheuses inaccessibles est une étape nécessaire pour évaluer les dangers naturels tels que chutes de blocs et glissements rocheux, mais aussi pour réaliser des modèles stratigraphiques ou de structures plissées. Les modèles géologiques 3D ont un grand potentiel pour être appliqués dans une vaste gamme de travaux géologiques dans le domaine de la recherche, mais aussi dans des projets appliqués comme les mines, les tunnels ou les réservoirs. Les développements récents des outils de télédétection terrestre (LiDAR, photogrammétrie et imagerie multispectrale / hyperspectrale) sont en train de révolutionner l'acquisition d'informations géomorphologiques et géologiques. Par conséquence, il y a un grand potentiel d'amélioration pour la modélisation d'objets géologiques, ainsi que des mécanismes de rupture et des conditions de stabilité, en intégrant des données détaillées acquises à distance. Pour augmenter les possibilités de prévoir les éboulements futurs, il est fondamental de comprendre l'évolution actuelle de la stabilité des parois rocheuses. Définir les zones qui sont théoriquement plus propices aux chutes de blocs peut être très utile pour simuler les trajectoires de propagation des blocs et pour réaliser des cartes de danger, qui constituent la base de l'aménagement du territoire dans les régions de montagne. Les questions plus importantes à résoudre pour estimer le danger de chutes de blocs sont : Où se situent les sources plus probables pour les chutes de blocs et éboulement futurs ? Avec quelle fréquence vont se produire ces événements ? Donc, j'ai caractérisé les réseaux de fractures sur le terrain et avec des nuages de points LiDAR. Ensuite, j'ai développé un modèle pour calculer les mécanismes de rupture directement sur les nuages de points pour pouvoir évaluer la susceptibilité au déclenchement de chutes de blocs à l'échelle de la paroi. Les zones sources de chutes de blocs les plus probables dans les parois granitiques de la vallée de Yosemite et du massif du Mont-Blanc ont été calculées et ensuite comparés aux inventaires des événements pour vérifier les méthodes. Des modèles d'équilibre limite ont été appliqués à plusieurs cas d'études pour évaluer les effets de différents paramètres sur la stabilité des parois. L'impact de la dégradation des ponts rocheux sur la stabilité de grands compartiments de roche dans la paroi ouest du Petit Dru a été évalué en utilisant la modélisation par éléments finis. En particulier j'ai analysé le grand éboulement de 2005 (265'000 m3), qui a emporté l'entier du pilier sud-ouest. Dans le modèle j'ai intégré des observations des conditions des joints, les caractéristiques du réseau de fractures et les résultats de tests géoméchaniques sur la roche intacte. Ces analyses ont amélioré l'estimation des paramètres qui influencent la stabilité des compartiments rocheux et ont servi pour définir des volumes probables pour des éboulements futurs. Les nuages de points obtenus avec le scanner laser terrestre ont été utilisés avec succès aussi pour produire des cartes géologiques en 3D, en utilisant l'intensité du signal réfléchi. Une autre technique pour obtenir des cartes géologiques des zones verticales consiste à combiner un maillage LiDAR avec une carte géologique en 2D. A El Capitan (Yosemite Valley) nous avons pu géoréferencer une carte verticale des principales roches plutoniques que j'ai utilisé ensuite pour étudier les raisons d'une érosion préférentielle de certaines zones de la paroi. D'autres efforts pour quantifier le taux d'érosion ont été effectués au Monte Generoso (Ticino, Suisse) où j'ai essayé d'améliorer l'estimation de l'érosion au long terme en prenant en compte les volumes des compartiments rocheux instables. L'intégration de ces résultats, sur la fracturation et la composition de l'amas rocheux, avec les méthodes existantes permet d'améliorer la prise en compte de l'aléa chute de pierres et éboulements et augmente les possibilités d'interprétation de l'évolution des parois rocheuses.

Rockfall detection from LIDAR point clouds: A clustering approach using R

The analysis of rockfall characteristics and spatial distribution is fundamental to understand and model the main factors that predispose to failure. In our study we analysed LiDAR point clouds aiming to: (1) detect and characterise single rockfalls; (2) investigate their spatial distribution. To this end, different cluster algorithms were applied: 1a) Nearest Neighbour Clutter Removal (NNCR) in combination with the Expectation?Maximization (EM) in order to separate feature points from clutter; 1b) a density based algorithm (DBSCAN) was applied to isolate the single clusters (i.e. the rockfall events); 2) finally we computed the Ripley's K-function to investigate the global spatial pattern of the extracted rockfalls. The method allowed proper identification and characterization of more than 600 rockfalls occurred on a cliff located in Puigcercos (Catalonia, Spain) during a time span of six months. The spatial distribution of these events proved that rockfall were clustered distributed at a welldefined distance-range. Computations were carried out using R free software for statistical computing and graphics. The understanding of the spatial distribution of precursory rockfalls may shed light on the forecasting of future failures.

Cigarette électronique : le point en 2015 [Electronic cigarette: what do we know in 2015?].

La cigarette électronique produit de la vapeur à inhaler contenant du propylène-glycol, des arômes et de la nicotine libérée rapidement. 6,7% de la population suisse, surtout des fumeurs, ont essayé la cigarette électronique et 0,1% l'utilise quotidiennement. Malgré l'incertitude due au bas niveau de preuves, la cigarette électronique pourrait être efficace pour cesser ou réduire le tabagisme. La sécurité de la cigarette électronique est démontrée à court terme mais pas à long terme ; sa toxicité semble très inférieure à celle du tabac. Les non-fumeurs et les jeunes utilisent peu la cigarette électronique qui ne semble pas les amener au tabagisme. Les mesures de santé publique recommandées sont la régulation du produit avec contrôle de la qualité ainsi que l'interdiction d'usage dans les lieux publics, de publicité et de vente aux mineurs. Electronic cigarettes are devices producing vapour containing propylene-glycol, flavourings and quickly delivered nicotine. 6.7% of the Swiss population, mainly smokers, experimented the electronic cigarette while 0.1% use it daily. Despite uncertainty due to the low level of evidence, electronic cigarettes might be effective for smoking cessation and reduction. The safety of electronic cigarettes is demonstrated at short-term but not at long-term; however its eventual toxicity is likely to be much lower than tobacco. Use of electronic cigarettes by non-smokers and youth who do not smoke is low and seems unlikely to lead them to tobacco use. Recommended public health measures include product regulation with quality control, ban in public places, prohibition of advertising and sales to minors.

Tabacologie: mise au point 2015 [Smoking cessation: update 2015].

La prévalence mondiale du tabagisme est environ cinq fois plus importante chez les hommes que chez les femmes, toutefois cet écart tend à s'égaliser. En ce qui concerne les conséquences sur la santé du tabagisme, les femmes semblent plus susceptibles que les hommes. Elles sont notamment plus à risque de présenter certains cancers pulmonaires ou de décéder de maladies cardiovasculaires. Si les hommes sont moins enclins à demander de l'aide pour arrêter de fumer, les femmes quant à elles ont moins de succès dans leurs tentatives d'arrêt et les traitements semblent moins efficaces chez ces dernières. Des interventions d'aide à l'arrêt et des mesures de prévention du tabagisme adaptées aux spécificités de genre ont le potentiel d'améliorer la prise en charge des fumeurs et de diminuer les disparités de genre en santé. Smoking remains a major public health problem in Switzerland and is responsible for about 9000 deaths annually. In 2013, a quarter of the Swiss population (15 and over) were smokers and more than half of them wanted to quit smoking. This article provides an update of Swiss clinical practice guidelines published in 2011 and covers several new features, including views regarding smoking reduction, gradual quitting, use of nicotine replacement therapy for a short period prior to quitting, nicotine mouth spray marketing and the reimbursement of varenicline and bupropion treatments (under certain conditions) by basic health insurance. An algorithm summarizes the different stages of management of patients who smoke.

L'année 2014 mise en perspective par les internistes hospitaliers [What is new in 2014 for the specialist in hospital internal medicine? The point of view of university hospital chief residents].

The year 2014 was rich in significant advances in all areas of internal medicine. Many of them have an impact on our daily practice and on the way we manage one problem or another. From the use of the ultrasound for the diagnosis of pneumonia to the choice of the site of venous access and the type of line, and the increasing complexity of choosing an oral anticoagulant agent, this selection offers to the readers a brief overview of the major advances. The chief residents in the Service of internal medicine of the Lausanne University hospital are pleased to share their readings.

Le point sur la pratique infirmière avancée [Update on advanced practice nursing].

NlmCategory="UNASSIGNED">We report outcomes of a clinical audit examining criteria used in clinical practice to rationalize endotracheal tube (ETT) suction, and the extent these matched criteria in the Endotracheal Suction Assessment Tool(ESAT)©. A retrospective audit of patient notes (N = 292) and analyses of criteria documented by pediatric intensive care nurses to rationalize ETT suction were undertaken. The median number of documented respiratory and ventilation status criteria per ETT suction event that matched the ESAT© criteria was 2 [Interquartile Range (IQR) 1-6]. All criteria listed within the ESAT© were documented within the reviewed notes. A direct link was established between criteria used for current clinical practice of ETT suction and the ESAT©. The ESAT©, therefore, reflects documented clinical decision making and could be used as both a clinical and educational guide for inexperienced pediatric critical care nurses. Modification to the ESAT© requires "preparation for extubation" to be added.

On Commutation and Conjugacy of Rational Languages and the Fixed Point Method

The research on language equations has been active during last decades. Compared to the equations on words the equations on languages are much more difficult to solve. Even very simple equations that are easy to solve for words can be very hard for languages. In this thesis we study two of such equations, namely commutation and conjugacy equations. We study these equations on some limited special cases and compare some of these results to the solutions of corresponding equations on words. For both equations we study the maximal solutions, the centralizer and the conjugator. We present a fixed point method that we can use to search these maximal solutions and analyze the reasons why this method is not successful for all languages. We give also several examples to illustrate the behaviour of this method.

Small scale energy production in Helsinki Metropolitan area in emission trading point of view

Emission trading with greenhouse gases and green certificates are part if the climate policy the main target of which is reduce greenhouse gas emissions. The carbon dioxide and fine particle emissions of energy production in Helsinki Metropolitan area are calculated in this study. The analysis is made mainly by district heating point of view and the changes of the district heating network are assessed. Carbon dioxide emissions would be a bit higher, if the district heating network is expanded, but then the fine particle emissions would be much lower. Carbon dioxide emissions are roughly 10 % higher, if the district heating network is expanded at same rate as it has in past five years in the year 2030. The expansion of district heating network would decrease the fine particle emissions about 40 %. The cost of the expansion is allocated to be reduction cost of the fine particle emissions, which is considerably higher than the traditional reduction methods costs. The possible new nuclear plant would reduce the emissions considerably and the costs of the nuclear plant would be relatively low comparing the other energy production methods.

Point sampling with uniformly distributed lines

In this paper we address the problem of extracting representative point samples from polygonal models. The goal of such a sampling algorithm is to find points that are evenly distributed. We propose star-discrepancy as a measure for sampling quality and propose new sampling methods based on global line distributions. We investigate several line generation algorithms including an efficient hardware-based sampling method. Our method contributes to the area of point-based graphics by extracting points that are more evenly distributed than by sampling with current algorithms