Emissão de CO2 do solo associada à calagem em área de conversão de laranja para cana-de-açúcar

A emissão de CO2 do solo (FCO2) em áreas agrícolas é resultante da interação de diversos fatores, sendo alterada pela prática de manejos do solo e da cultura, além das condições edafoclimáticas locais. Neste estudo, objetivou-se quantificar a FCO2 em função da calagem e posição da aplicação (antiga linha e entrelinha) da cultura da laranja em área de conversão para a cultura da cana-de-açúcar, no município de Frutal-MG. Os tratamentos avaliados foram: Linha/CC (linha com aplicação de calcário); Entrelinha/CC (entrelinha com aplicação de calcário); Linha/SC (linha sem aplicação de calcário), e Entrelinha/SC (entrelinha sem aplicação de calcário). FCO2, temperatura do solo (Ts) e umidade do solo (Us) foram avaliadas durante 12 dias. O maior valor médio da FCO2 ao longo do período de estudo foi observado no tratamento Linha/CC (9,63 µmol m-2 s-1); e o menor, no tratamento Entrelinha/CC (5,92 µmol m-2 s-1), segundo teste de Tukey. A FCO2 foi negativamente correlacionada à Us na Linha/CC (r = - 0,56; p < 0,05) e na Linha/SC (r = - 0,66; p < 0,05). Entre a FCO2 e a Ts, verificou-se correlação positiva e significativa na Linha/CC (r = 0,76; p < 0,001), na Linha/SC (r = 0,89; p < 0,001) e na Entrelinha/SC (r = 0,66; p < 0,05). Observou-se que a calagem e a posição de aplicação (linha e entrelinha) influenciaram nas emissões de CO2 do solo.

Ion selective electrodes for determination of low and ultra low concentrations of lead (II) in natural waters

Att övervaka förekomsten av giftiga komponenter i naturliga vattendrag är nödvändigt för människans välmående. Eftersom halten av föroreningar i naturens ekosystem bör hållas möjligast låg, pågår en ständig jakt efter kemiska analysmetoder med allt lägre detektionsgränser. I dagens läge görs miljöanalyser med dyr och sofistikerad instrumentering som kräver mycket underhåll. Jonselektiva elektroder har flera goda egenskaper som t.ex. bärbarhet, låg energiförbrukning, och dessutom är de relativt kostnadseffektiva. Att använda jonselektiva elektroder vid miljöanalyser är möjligt om deras känslighetsområde kan utvidgas genom att sänka deras detektionsgränser. För att sänka detektionsgränsen för Pb(II)-selektiva elektroder undersöktes olika typer av jonselektiva membran som baserades på polyakrylat-kopolymerer, PVC och PbS/Ag2S. Fast-fas elektroder med membran av PbS/Ag2S är i allmänhet enklare och mer robusta än konventionella elektroder vid spårämnesanalys av joniska föroreningar. Fast-fas elektrodernas detektionsgräns sänktes i detta arbete med en nyutvecklad galvanostatisk polariseringsmetod och de kunde sedan framgångsrikt användas för kvantitativa bestämningar av bly(II)-halter i miljöprov som hade samlats in i den finska skärgården nära tidigare industriområden. Analysresultaten som erhölls med jonselektiva elektroder bekräftades med andra analytiska metoder. Att sänka detektionsgränsen m.hj.a. den nyutvecklade polariseringsmetoden möjliggör bestämning av låga och ultra-låga blyhalter som inte kunde nås med klassisk potentiometri. Den verkliga fördelen med att använda dessa blyselektiva elektroder är möjligheten att utföra mätningar i obehandlade miljöprov trots närvaron av fasta partiklar vilket inte är möjligt att göra med andra analysmetoder. Jag väntar mig att den nyutvecklade polariseringsmetoden kommer att sätta en trend i spårämnesanalys med jonselektiva elektroder.

F/A-18 -torjuntahävittäjän seuraajakaluston esiselvitys- ja hankintaprosessit

Ilmavoimien Hornet-kalusto ”eläköityy” nykyisen elinkaarisuunnitelman mukaisesti vuosina 2025–2030. Käytännössä tämä tarkoittaa, että Suomen maanpuolustuskokonaisuudesta poistuu ilmapuolustuksen tärkeintä elementtiä toteuttava suorituskyky. Näin merkittävän suorituskyvyn poistuminen valtakunnasta, käynnistää ensin strategisen suunnittelun prosessin määrittämään millä suorituskyvyllä poistuva kyky korvataan. Laajan suorituskyvyn korvaaminen on hyvin mittava ja paljon aikaa vievä hankintaprosessi (ml. strategisen suunnittelun vaihe ennen hankintavaihetta). Tämän vuoksi on oleellista käynnistää korvaavan suorituskyvyn hankinnan valmistelu riittävän aikaisessa vaiheessa, jotta vältetään katko ilmapuolustuksen suorituskyvyssä. Tässä tutkimustyössä lähtökohtaoletuksesi valittiin, että poistuva F/A-18 -suorituskyky tullaan korvaamaan uudella torjuntahävittäjäkalustolla ja että hankinnan toteuttamisvastuu käsketään Ilmavoimille. Tältä pohjalta tutkimustyössä valmisteltiin ja suunniteltiin Ilmavoimien seuraavan hävittäjänkaluston hankintaprosessia ja sen eri vaiheita. Työssä luotiin selkeä aikataulutettu kokonaissuunnitelma hankinnasta, joka tulee toimimaan perustana linjaorganisaatioiden jatkaessa virkatyönä hankinnan ideointivaiheen suunnitelmallista eteenpäinvientiä. Toisena osiona työssä muodostettiin yhteenveto operatiivisen konseptin suunnittelun valmiudesta ja valmiudettomuudesta (ts. tuotiin esille kokonaan puuttuvia oleellisia suunnittelukokonaisuuksia). Syy miksi tässä tutkimustyössä kokonaisuuden suunnittelun lisäksi tarkastelun kohteeksi valittiin operatiivinen konsepti, johtui siitä että se on aikataulullisesti kriittisimmällä polulla. Tutkimustyön konkreettisina tuloksina tuotettiin - tarkennettu aikataulusuunnitelma hankinnalle - resurssitarvemäärittely hankinnan eri vaiheissa - yhteenveto hankinnan operatiivisen konseptin suunnittelua tukevista selvityksistä - yhteenveto operatiiviseen konseptiin tarvittavista selvityksistä.

Efeitos do cloreto de gadolínio na pancreatite induzida por tauracolato de sódio em ratos

OBJETIVO: Avaliar os efeitos do uso de cloreto de gadolínio como pré-tratamento e tratamento em um modelo experimental de pancreatite em ratos induzida por tauracolato de sódio a 3%. MÉTODOS: Ratos Wistar foram divididos em cinco grupos: grupo SF - controle com solução fisiológica intra-ductal e IV; grupo TS - controle com PA induzida por tauracolato de sódio a 3% e solução fisiológica a 0,9% IV; grupo GD - controle com SF intra-ductal e cloreto de gadolínio IV; grupo GDTS - pré-tratamento com GD (24h antes da indução da PA) e grupo TSGD - tratamento com GD (1h após a indução da PA). Foi realizado dosagem sérica de amilase, transaminases e TNF-á; determinação da atividade da MPO no tecido pulmonar; histologia pancreática e pulmonar. RESULTADOS: O número de animais mortos antes do término previsto do experimento foi significativamente maior no grupo TSGD (p=0,046). Os escores de pancreatite e de dano pulmonar foram mais elevados nos grupos que utilizaram tauracolato em comparação aos grupos com infusão intra-ductal de solução salina. Não houve diferenças nas demais variáveis estudadas na comparação entre os grupos TS; GDTS e TSGD. CONCLUSÃO: Não foram demonstrados benefícios com o uso de cloreto de gadolínio de forma profilática e terapêutica.

Cysticercosis in experimentally and naturally infected pigs: parasitological and immunological diagnosis

Our objective was to evaluate the diagnosis of swine cysticercosis by examining "ante mortem" (inspection of the tongue), "post mortem" (inspection and detailed necropsy) and ELISA for research in serum of antibodies (Ab-ELISA) and antigens (Ag-ELISA). Seven (7) pigs were experimentally infected orally with eggs of Taenia solium and another 10 were naturally infected. In the pigs experimentally infected, inspection of the tongue was negative in all animals, in the routine inspection detailed necropsy and cysticercis were identified in all of them. In pigs with heavy natural infection, inspection of the tongue identified cysticerci in two (20%), while at inspection with necropsy the parasites were identified in large quantities in all animals. In ELISA for antibody search (Ab-ELISA) TS-14 recombinant protein was used, and in search for antigen (Ag-ELISA) a monoclonal antibody against this protein. In animals experimentally infected, blood was collected weekly for 140 days. The Ab-ELISA identified an increase in titers of antibody to cysticerci 21 days after infection, and at the end of the experimental period six animals (86%) were positive to the test. The search for circulating antigens (Ag-ELISA) was positive in two pigs 28 to 91 days after infection. All naturally infected pigs were positive for Ag-ELISA and Ab-ELISA. The search for antibodies and antigens by ELISA in serum from 30 pigs of a local farm and without history of cysticercosis was negative. Thus, the use of TS-14 antigen in ELISA test (Ab-ELISA) can be useful for the diagnosis of cysticercosis in pigs with low infection.

Feasibility of ASH DEC‐ process in treating sewage sludge and manure ash in Finland

In Finland the thermal treatment of sewage sludge has been moderate in 21th century. The reason has been the high moisture content of sludge. During 2005-2008, 97-99% of sewage sludge was utilized in landscaping and agriculture. However agricultural use has been during 2005-2007 less than 3 %. The aim of national waste management plan is that by 2016 100% of sludge is used either as soil amendment or energy. The most popular utilization method for manure is spreading it on arable land. The dry manures such as poultry manure and horse manure could also be used in incineration. The ashes could be used as fertilizers and while it is not suitable as a starter fertilizer, it is suitable in maintaining P levels in the soil. One of the main drivers for more efficient nutrient management is the eutrophication in lakes and the Baltic See. ASH DEC process can be used in concentrating phosphorus rich ashes while separating the heavy metals that could be included. ASH DEC process uses thermochemical treatment to produce renewable phosphate for fertilizer production. The process includes mixing of ashes and chlorine donors and subsequent treatment in rotary kiln for 20 min in temperature of 900 – 1 050 oC. The heavy metals evaporate and P-rich product is obtained. The toxic substances are retained in air pollution control system in form of mixed metal hydroxides. The aim of conducting this study is to estimate the potential of ASH DEC process in treating phosphorus rich ashes in Finland. The masses considered in are sewage sludge, dry manure from horses, and poultry and liquid pig manure. To date the usual treatment method for sewage sludge in Finland is composting or anaerobic digestion. Part of the amount of produced sewage sludge (800 kt/a fresh mass and 160 kt/a TS) could also be incinerated and the residual ashes used in ASH DEC process. Incinerating only manure can be economically difficult to manage because the incineration of manure is in Finland considered as waste incineration. Getting a permit for waste incineration is difficult and also small scale waste incineration is too expensive. The manure could act as an additional feedstock in counties with high density of animal husbandry where the land area might not be enough for spreading of manure. Now when the manure acts as a supplementary feedstock beside sludge, the ash can’t be used directly as fertilizer. Then it could be used in ASH DEC process. The perquisite is that the manure producers could pay for the incineration, which might prove problematic.

On Energy Efficient Computing Platforms

In accordance with the Moore's law, the increasing number of on-chip integrated transistors has enabled modern computing platforms with not only higher processing power but also more affordable prices. As a result, these platforms, including portable devices, work stations and data centres, are becoming an inevitable part of the human society. However, with the demand for portability and raising cost of power, energy efficiency has emerged to be a major concern for modern computing platforms. As the complexity of on-chip systems increases, Network-on-Chip (NoC) has been proved as an efficient communication architecture which can further improve system performances and scalability while reducing the design cost. Therefore, in this thesis, we study and propose energy optimization approaches based on NoC architecture, with special focuses on the following aspects. As the architectural trend of future computing platforms, 3D systems have many bene ts including higher integration density, smaller footprint, heterogeneous integration, etc. Moreover, 3D technology can signi cantly improve the network communication and effectively avoid long wirings, and therefore, provide higher system performance and energy efficiency. With the dynamic nature of on-chip communication in large scale NoC based systems, run-time system optimization is of crucial importance in order to achieve higher system reliability and essentially energy efficiency. In this thesis, we propose an agent based system design approach where agents are on-chip components which monitor and control system parameters such as supply voltage, operating frequency, etc. With this approach, we have analysed the implementation alternatives for dynamic voltage and frequency scaling and power gating techniques at different granularity, which reduce both dynamic and leakage energy consumption. Topologies, being one of the key factors for NoCs, are also explored for energy saving purpose. A Honeycomb NoC architecture is proposed in this thesis with turn-model based deadlock-free routing algorithms. Our analysis and simulation based evaluation show that Honeycomb NoCs outperform their Mesh based counterparts in terms of network cost, system performance as well as energy efficiency.

Effect of wave frequency on the nonlinear interaction between Görtler vortices and three-dimensional Tollmien-Schlichting waves

The nonlinear interaction between Görtler vortices (GV) and three-dimensional Tollmien-Schlichting (TS) waves nonlinear interaction is studied with a spatial, nonparallel model based on the Parabolized Stability Equations (PSE). In this investigation the effect of TS wave frequency on the nonlinear interaction is studied. As verified in previous investigations using the same numerical model, the relative amplitudes and growth rates are the dominant parameters in GV/TS wave interaction. In this sense, the wave frequency influence is important in defining the streamwise distance traveled by the disturbances in the unstable region of the stability diagram and in defining the amplification rates that they go through.

Improvement of wet and dry web properties in papermaking by controlling water and fiber quality

Pappersindustrin står inför många utmaningar och bör uppfylla krav som ställs av t.ex. marknadstrender och slutanvändare. Snabbare och effektivare processer ställer även större krav på pappersbanans mekaniska egenskaper. Avbrott i produktionen sker inte enbart pga. låg styrka utan orsaken kan även vara en för låg spänning i pappersbanan. De flesta problemen sker vid våtpressen och/eller i början av torkpartiet då papprets torrhalt är 30-70 %. Spänningen hålls inte konstant efter töjning, utan sjunker pga. papprets relaxering, som till största delen sker då pappret flyttas från pressen till torkpartiet. Ur forskningssynvinkel öppnar en smidigt fungerande verksamhet med potentiella energibesparingar upp möjligheterna för förbättring av befintliga processer. I detta arbete undersöktes hur olika faktorer inverkar på fibernätverkets avvattning, initiala våtstyrka och relaxering samt också på slutproduktens mekaniska egenskaper och ytegenskaper. I första delen ändrades processvattnets egenskaper, såsom pH, konduktivitet och ytspänning. Ytspänningen varierades genom tillsatts av ett nonjoniskt ytaktivt ämne, s.k. surfaktant. Fiberegenskaperna modifierades också. Fibern maldes antingen genom en mild eller genom en hård process. Effekten av finmaterial undersöktes genom att tillsätta finmaterial till den ursprungliga massan eller genom att avlägsna finmaterialet från den malda massan. I den sista delen användes en hemicellulosa, som finns i stora mängder i gran, som tillsatsmedel. Förutom naturliga galaktoglukomannaner (GGM), tillverkades också en katjoniserad, en karboximetylerad samt en iminerad, amfifil GGM. Dessa användes i pappersmassa eller sprayades på ytan av ett nybildat ark. Resultaten, som erhölls i denna avhandling, bildar en värdefull kunskapsbas, som kan användas för kontroll och reglering av pappersmaskinens körbarhet och papperskvalitet.

On Bayesian predictive modeling : with applications on the analysis of chromatography data in forensic investigations

Med prediktion avses att man skattar det framtida värdet på en observerbar storhet. Kännetecknande för det bayesianska paradigmet är att osäkerhet gällande okända storheter uttrycks i form av sannolikheter. En bayesiansk prediktiv modell är således en sannolikhetsfördelning över de möjliga värden som en observerbar, men ännu inte observerad storhet kan anta. I de artiklar som ingår i avhandlingen utvecklas metoder, vilka bl.a. tillämpas i analys av kromatografiska data i brottsutredningar. Med undantag för den första artikeln, bygger samtliga metoder på bayesiansk prediktiv modellering. I artiklarna betraktas i huvudsak tre olika typer av problem relaterade till kromatografiska data: kvantifiering, parvis matchning och klustring. I den första artikeln utvecklas en icke-parametrisk modell för mätfel av kromatografiska analyser av alkoholhalt i blodet. I den andra artikeln utvecklas en prediktiv inferensmetod för jämförelse av två stickprov. Metoden tillämpas i den tredje artik eln för jämförelse av oljeprover i syfte att kunna identifiera den förorenande källan i samband med oljeutsläpp. I den fjärde artikeln härleds en prediktiv modell för klustring av data av blandad diskret och kontinuerlig typ, vilken bl.a. tillämpas i klassificering av amfetaminprover med avseende på produktionsomgångar.

Evaluation of methods for estimating energy performance of biogas production

This study focused on identifying various system boundaries and evaluating methods of estimating energy performance of biogas production. First, the output-input ratio method used for evaluating energy performance from the system boundaries was reviewed. Secondly, ways to assess the efficiency of biogas use and parasitic energy demand were investigated. Thirdly, an approach for comparing biogas production to other energy production methods was evaluated. Data from an existing biogas plant, located in Finland, was used for the evaluation of the methods. The results indicate that calculating and comparing the output-input ratios (Rpr1, Rpr2, Rut, Rpl and Rsy) can be used in evaluating the performance of biogas production system. In addition, the parasitic energy demand calculations (w) and the efficiency of utilizing produced biogas (η) provide detailed information on energy performance of the biogas plant. Furthermore, Rf and energy output in relation to total solid mass of feedstock (FO/TS) are useful in comparing biogas production with other energy recovery technologies. As a conclusion it is essential for the comparability of biogas plants that their energy performance would be calculated in a more consistent manner in the future.

Interdependence of International Stock Markets, European Government Bond Market and Gold Market

This thesis examines the interdependence of international stock markets (the USA, Europe, Japan, emerging markets, and frontier markets), European government bond market, and gold market during the 21st century. Special focus is on the dynamics of the correlations between the markets, as well as on, spillovers in mean returns and volatility. The mean return spillovers are examined on the basis of the bivariate VAR(1) model, whereas the bivariate BEKK-GARCH(1, 1) model is employed for the analysis of the volatility spillovers. In order to analyze the spillover effects in different market conditions, the full sample period from 2000 to 2013 is divided into the pre-crisis period (2000–2006) and the crisis period (2007–2013). The results indicate an increasing interdependence especially within international stock markets during the periods of financial turbulence, and are thus consistent with the existing literature. Hence, bond and gold markets provide the best diversification benefits for equity investors, particularly during the periods of market turmoil.

On-line determination of residual collector concentration in flotation process

Valuable minerals can be recovered by using froth flotation. This is a widely used separation technique in mineral processing. In a flotation cell hydrophobic particles attach on air bubbles dispersed in the slurry and rise on the top of the cell. Valuable particles are made hydrophobic by adding collector chemicals in the slurry. With the help of a frother reagent a stable froth forms on the top of the cell and the froth with valuable minerals, i.e. the concentrate, can be removed for further processing. Normally the collector is dosed on the basis of the feed rate of the flotation circuit and the head grade of the valuable metal. However, also the mineral composition of the ore affects the consumption of the collector, i.e. how much is adsorbed on the mineral surfaces. Therefore it is worth monitoring the residual collector concentration in the flotation tailings. Excess usage of collector causes unnecessary costs and may even disturb the process. In the literature part of the Master’s thesis the basics of flotation process and collector chemicals are introduced. Capillary electrophoresis (CE), an analytical technique suitable for detecting collector chemicals, is also reviewed. In the experimental part of the thesis the development of an on-line CE method for monitoring the concentration of collector chemicals in a flotation process and the results of a measurement campaign are presented. It was possible to determine the quality and quantity of collector chemicals in nickel flotation tailings at a concentrator plant with the developed on-line CE method. Sodium ethyl xanthate and sodium isopropyl xanthate residuals were found in the tailings and slight correlation between the measured concentrations and the dosage amounts could be seen.

Phytosociology of the remaining xerophytic woodland associated to an environmental gradient at the banks of the São Francisco river - Petrolina, Pernambuco, Brazil

Floristic and phytosociological surveys were carried out for 12 months in the Embrapa-SPSB, Petrolina, Pernambuco, Brazil. A transect was laid on starting at the river bank extending for 790 m away from the river and divided into 140 10 × 10 m contiguous plots. In each plot, all standing plants, alive or dead, with stem diameter at soil level > 3 cm and total height > 1 m were sampled. Along this transect, an elevation range of 9.40 m was registered and five topographical environments were identified: riverside (MR), dike (D), floodable depression (DI), boundary terrace (TL) - all of them belonging to the fluvial terrace with Fluvic Neosol and Haplic Cambisol both silty textured eutrophic soils - and the inlander tableland (TS), with medium sandy-textured Red-Yellow Argisols. Fourty-eight species/morphospecies, distributed into 39 genera and 21 families, were identified. Four phytogeoenvironments (MR, D + TL, DI + TL, and TS) were registered based on environmental variations and floristic similarities among plots using cluster analyses. The MR environment showed the largest total density, total basal area, maximum and medium heights and maximum diameter. Moreover, it had 8.1% of plants with heights above 8 m against 0.6% for D + TL, 0.2% for DI + TL, and 0% for TS. The species with the largest importance value were Inga vera subsp. affinis (DC.) T.D. Pennington in MR, Mimosa bimucronata Kunth in D + TL and DI + TL and M. tenuiflora (Willd.) Poir. in TS.