Error probability in synchronous digital circuits due to power supply noise

This paper presents a probabilistic approach to model the problem of power supply voltage fluctuations. Error probability calculations are shown for some 90-nm technology digital circuits.The analysis here considered gives the timing violation error probability as a new design quality factor in front of conventional techniques that assume the full perfection of the circuit. The evaluation of the error bound can be useful for new design paradigms where retry and self-recoveringtechniques are being applied to the design of high performance processors. The method here described allows to evaluate the performance of these techniques by means of calculating the expected error probability in terms of power supply distribution quality.

Voltage fluctuations in IC power supply distribution

The supply voltage decrease and powerconsumption increase of modern ICs made the requirements for low voltage fluctuation caused by packaging and on-chip parasitic impedances more difficult to achieve. Most of the research works on the area assume that all the nodes of the chip are fed at thesame voltage, in such a way that the main cause of disturbance or fluctuation is the parasitic impedance of packaging. In the paper an approach to analyze the effect of high and fast current demands on the on-chip power supply network. First an approach to model the entire network by considering a homogeneous conductive foil is presented. The modification of the timing parameters of flipflops caused by spatial voltage drops through the IC surface are also investigated.

Item master management in the engineer-to-order supply chain

Diplomityöntavoitteena on tutkia, kuinka nimiketiedon hallinnalla voidaan parantaa kustannustehokkuutta projektiohjautuvassa toimitusketjussa. Työn kohdeyritys on Konecranes Oyj:n tytäryhtiö Konecranes Heavy Lifting Oy. Nimiketiedon hallinta liittyy läheisesti tuotetiedon hallintaan. Teoriaosassa käsitellään toimitusketjuympäristön tekijöitä, modulaarisuuden ja asiakaskohtaisuuden ongelmallisuutta sekä informaatiovirran vaikutuksia eri toiminnoissa. Yritysosassa vertaillaan konsernitason kahta liiketoiminta-aluetta strategiavalintojen, tuotteiden modulaarisuuden sekä tilaus-toimitusprosessissa liikkuvan nimikeinformaation perusteella. Diplomityön tuloksena annetaan suuntaviivat; nimikemassan eheytykseen, strategisten nimikkeiden tunnistamiseen ja määrittämiseen, nimikkeiden hallintaan sekä master-datan sijoittamiseen tietojärjestelmäympäristöön.

Sediment budget monitoring of a debris-flow torrent (French Prealps)

The Manival near Grenoble (French Prealps) is a very active debris-flow torrent equipped with a large sediment trap (25 000 m3) protecting an urbanized alluvial fan from debris-flows. We began monitoring the sediment budget of the catchment controlled by the trap in Spring 2009. Terrestrial laser scanner is used for monitoring topographic changes in a small gully, the main channel, and the sediment trap. In the main channel, 39 cross-sections are surveyed after every event. Three periods of intense geomorphic activity are documented here. The first was induced by a convective storm in August 2009 which triggered a debris-flow that deposited ~1,800 m3 of sediment in the trap. The debris-flow originated in the upper reach of the main channel and our observations showed that sediment outputs were entirely supplied by channel scouring. Hillslope debris-flows were initiated on talus slopes, as revealed by terrestrial LiDAR resurveys; however they were disconnected to the main channel. The second and third periods of geomorphic activity were induced by long duration and low intensity rainfall events in September and October 2009 which generate small flow events with intense bedload transport. These events contribute to recharge the debris-flow channel with sediments by depositing important gravel dunes propagating from headwaters. The total recharge in the torrent subsequent to bedload transport events was estimated at 34% of the sediment erosion induced by the August debris-flow.

Developing Service Promise Concept Based on Supply Chain

Diplomityön tavoitteena on analysoida ja kehittää palvelulupauskonseptia toimitusketjuun perustuen Halton Oy:ssä. Työ toteutettiin, koska asiakaslähtöinen liiketoimintatapa on voimakkaasti valtaamassa alaa tuote- ja tuotantopainotteiselta toimintatavalta. Tuotteiden erinomaisuus koetaan markkinoilla yhä useammin itsestään selvyytenä. Prosessien tehokas hallitseminen ja asiakkaan kokeman lisäarvon muodostaminen ovat muodostuneet ratkaisevimmaksi kilpailuedun luojaksi. Toimitusketjun hallinnalla ja sähköisellä kaupankäynnillä on tärkeä rooli tämän kilpailuedun muodostumisessa.Diplomityö käsittelee uuden palvelulupauskonseptin tarjoamia etuja Halton Oy:lle. Työssä pureudutaan toimitusketjun ja sähköisen kaupankäynnin integraatiomahdollisuuksiin. Tarkoituksena on selvittää parhaat mahdolliset kriteerit Haltonin palvelulupauskonseptilleja luoda menetelmät yrityksen materiaalivirtojen sekä uuden konseptin analysoinnille ja kehittämiselle jatkossa.

When supply travels far beyond demand: Causes of oversupply in Spain’s transport infrastructure

Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy.

When supply travels far beyond demand: Causes of oversupply in Spain’s transport infrastructure

Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy.

Decomposition of Ruppia cirrhosa (Petagna) Grande in the sediment of a coastal lagoon

The decomposition process of Ruppia cirrhosa was studied in a Mediterranean coastal lagoon in the Delta of the River Ebro (NE Spain). Leaves and shoots of Ruppia were enclosed in 1 mm-mesh and 100 pm-mesh litter bags to ascertain the effect of detritivores, macroinvertebrates, and bacteria and fungi, respectively. Changes in biomass and carbon, and, nitrogen and phosphorus concentrations in the detritus were studied at the sediment-water interface and in the sediment. Significant differences in biomass decay were observed between the two bag types. Significant differences in decomposition were observed between the two experimental conditions studied using 100 pm-mesh bags. These differences were not significant when using the 1 mm-mesh bags. The carbon content in the detritus remained constant during the decomposition process. The percentage of nitrogen increased progressively from an initial 2.4 % to 3 %. The percentage of phosphorus decreased rapidly during the first two days of decomposition from an initial 0.26 % to 0.17 %. This loss is greater in the sediment than in the water column or at the sediment-water interface. From these results we deduce that the activity of microorganisms seems to be more important in the sediment than in the water-sediment interface, and that grazing by macroinvertebrates has less importance in the sediment than in the water column.

Effect of nitrogen and phosphorus supply on growth, chlorophyll content and tissue composition of the macroalga Chaetomorpha linum (O.F. Mull), Kutz, in a Mediterranean Coastal Lagoon

The effect of dissolved nutrients on growth, nutrient content and uptake rates of Chaetomorpha linum in a Mediterranean coastal lagoon (Tancada, Ebro delta, NE Spain) was studied in laboratory experiments. Water was enriched with distinct forms of nitrogen, such as nitrate or ammonium and phosphorus. Enrichment with N, P or with both nutrients resulted in a significant increase in the tissue content of these nutrients. N-enrichment was followed by an increase in chlorophyll content after 4 days of treatment, although the difference was only significant when nitrate was added without P. P-enrichment had no significant effect on chlorophyll content. In all the treatments an increase in biomass was obseved after 10 days. This increase was higher in the N+P treatments. In all the treatments the uptake rate was significantly higher when nutrients were added than in control jars. The uptake rate of N, as ammonium, and P were significantly higher when they were added alone while that of N as nitrate was higher in the N+P treatment. In the P-enriched cultures, the final P-content of macroalgal tissues was ten-fold that of the initial tissue concentrations, thereby indicating luxury P-uptake. Moreover, at the end of the incubation the N:P ratio increased to 80, showing that P rather than N was the limiting factor for C. linum in the Tancada lagoon. The relatively high availability of N is related to the N inputs from rice fields that surround the lagoon and to P binding in sediments.

Sediment budget monitoring of debris-flow and bedload transport in the Manival Torrent, SE France

Steep mountain catchments typically experience large sediment pulses from hillslopes which are stored in headwater channels and remobilized by debris-flows or bedload transport. Event-based sediment budget monitoring in the active Manival debris-flow torrent in the French Alps during a two-year period gave insights into the catchment-scale sediment routing during moderate rainfall intensities which occur several times each year. The monitoring was based on intensive topographic resurveys of low- and high-order channels using different techniques (cross-section surveys with total station and high-resolution channel surveys with terrestrial and airborne laser scanning). Data on sediment output volumes from the main channel were obtained by a sediment trap. Two debris-flows were observed, as well as several bedload transport flow events. Sediment budget analysis of the two debris-flows revealed that most of the debris-flow volumes were supplied by channel scouring (more than 92%). Bedload transport during autumn contributed to the sediment recharge of high-order channels by the deposition of large gravel wedges. This process is recognized as being fundamental for debris-flow occurrence during the subsequent spring and summer. A time shift of scour-and-fill sequences was observed between low- and high-order channels, revealing the discontinuous sediment transfer in the catchment during common flow events. A conceptual model of sediment routing for different event magnitude is proposed.

In conditions of limited chromophore supply rods entrap 11-cis-retinal leading to loss of cone function and cell death.

RPE65 is a retinoid isomerase required for the production of 11-cis-retinal, the chromophore of both cone and rod visual pigments. We recently established an R91W knock-in mouse strain as homologous animal model for patients afflicted by this mutation in RPE65. These mice have impaired vision and can only synthesize minute amounts of 11-cis-retinal. Here, we investigated the consequences of this chromophore insufficiency on cone function and pathophysiology. We found that the R91W mutation caused cone opsin mislocalization and progressive geographic cone atrophy. Remnant visual function was mostly mediated by rods. Ablation of rod opsin corrected the localization of cone opsin and improved cone retinal function. Thus, our analyses indicate that under conditions of limited chromophore supply rods and cones compete for 11-cis-retinal that derives from regeneration pathway(s) which are reliant on RPE65. Due to their higher number and the instability of cone opsin, rods are privileged under this condition while cones suffer chromophore deficiency and degenerate. These findings reinforce the notion that in patients any effective gene therapy with RPE65 needs to target the cone-rich macula directly to locally restore the cones' chromophore supply outside the reach of rods.

Value added logistics in supply and demand chains. Smile. Part 1. eBusiness between global company and itslocal sme supplier network

VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

Tehdaslogistiikka : value added logistics of the supply and demand chain costfix

VALOSADE (Value Added Logistics in Supply and Demand Chains) on Lappeenrannan teknillisen yliopiston ja sielläprofessori Anita Lukan VALORE -tutkimusryhmän toteuttama tutkimusprojekti, jonka rahoittaja on ollut Tekes. Projekti on osa Tekesin ELO - Elektronisen liiketoiminnan logistiikka - teknologiaohjelmaa. Tutkimusta rahoittivat Tekesin lisäksi neljä yritystä, jotka toimivat myös tutkimustyön kohteina ja toimivat tarpeen mukaan yhteistyössä tutkijoiden kanssa. Yritysten toimialat ovat metsäteollisuus, laitevalmistaja, joka tarjoaa myös tuotteilleen jälkimarkkinapalveluja sekä kaksi logistiikkapalveluyritystä. Tämä työraportti liittyy VALOSADE - tutkimusprojektin osaprojektiin Costfix (Paper Mill Process - from Fixed Costs into Variable Costs). Costfix - projektin tavoitteena on tutkia ja löytää paperiteollisuudelle uusia toimintamalleja, jotka mahdollistavat kiinteiden kustannusten muuttamisen muuttuviksi. Merkittävä tutkimuksen osa-alue on myös tutkimuskohteiden liike-toiminnan nykytilan aiempaa tarkempi selvittäminen. Tämä työraportti käsittelee kunnossapidon materiaalilogistiikan osalta tehtaan sisällä tapahtuvaa toimintaa, josta tässä tutkimuksessa käytetään nimitystä tehdaslogistiikka. Nykytilaselvityksen perusteella nykyinen prosessiteollisuudessa ja myös pääsääntöisesti valmistavassa teollisuudessa yleisesti vallitseva teollisuusyrityksen käyttöinvestointia ylläpitävän palveluprosessin toimintarakenne, johtamistapa ja prosessin operatiivisten tehtävien toimenkuvat eivät tue ko. palvelukokonaisuuden tehokasta ja tuloksellista toteuttamista. Nykymuotoinen toimintamalli pikemminkin rajoittaa toimintaprosessin kokonaishallintaa ja sen tehostamiseksi investoitujen uusien teknisten ratkaisujen ja teknologian käyttöönottoa. Lisäksi yleisesti vallitseva toimintakulttuuri (mm. arvokäsitykset, uskomukset sekä toiminnan ja tavoitteiden taustalla olevat motiivit) sekä vaikeuttaa nykyisen ja tulevan kilpailutilanteen edellyttämien tehokkuus- ja tuottavuustavoitteiden toteutumista että hidastaa uudistusten onnistumista edellyttävän muutoksen etenemistä yrityksen sisällä. Tutkimuksen tulokset vahvistivat osaltaan sen, että tehdas- ja toimintokeskeinen johtaminen aiheuttavat palveluprosessin eri tehtäville asetettujen tavoitteiden ja perustehtäväkäsityksen välille ristiriitoja, joista seuraa sekä suoria että välillisiä vaikutuksia teollisuusyrityksen tuotantoprosessin toiminnan laatuun ja tuotantolaitteiden käyttövarmuuteen. Palvelukokonaisuuteen kuuluvien eri toimintaprosessien tehtävät on jaettu ristiriitaisesti toiminnoille siten, että erityisestikunnossapidon teknisten toimihenkilöitten hoidettavana on sekä ihmisen henkilökohtaisen kapasiteettirajan ylittävä että toisistaan liian suuri erilaisia osaamisia ja ymmärrystä edellyttävä tehtävämäärä. Nykytilan palvelutuotannossa esiintyvien ongelmien seuraukset ja perussyyt osoittavat, että merkittävästi pääomia sitovan valmistavan teollisuuden (mm. prosessiteollisuus) käyttö-omaisuutta ylläpitävän palveluprosessin hallinta on ulkoistettava tehdastasolta itsenäisesti hoidettavaksi liiketoimintakokonaisuudeksi, jonka operatiivinen johtaminen tapahtuu toimintaprosesseittain konsernin ylätasolta käsin. Johtamismallissa painottuu prosessijohtaminen ja oman vastuualueen toimintaprosessin asiantuntemus. Lisäksi ihmisen osaamiseen, ymmärrykseen ja toimintatapaan perustuva palvelu edellyttää johtamiselta henkilöjohtamistaitoa ja osaamisen johtamista. Liiketoiminnan uudenlainen keskittyminen, verkostoituminen ja globalisoituminen edellyttävät johdoltamyös erilaisten toimintaverkostojen ja sidosryhmien toiminnan ja tarpeen ymmärtämistä. Tutkimustulosten perusteella myös palveluprosesseissa toimivien toimihenkilöitten tehtäväkuvia on muutettava radikaalisti ja osa uusista toimenkuvista edellyttää lisäksi henkilöitten osaamistason aktiivista parantamista. Tässä raportissa esitetään toimintamalli, jossa kuvataan tutkimuksen pohjalta luotu palvelukokonaisuuden johtamismalli ja palveluprosessien eri tehtävätasot tehtävineen. Kuvattu johtamismalli on ollut jo yleisesti käytössä yksittäisillä palvelualoilla, mutta tässä esitetty malli on valmistavan yrityksen teknisiin tukipalveluihin muokattu sovellus.

Supply chain integration: studies on linking customer responsiveness and operational efficiency in logistics policy planning

Abstract The research problem in the thesis deals with improving the responsiveness and efficiency of logistics service processes between a supplier and its customers. The improvement can be sought by customizing the services and increasing the coordination of activities between the different parties in the supply chain. It is argued that to achieve coordination the parties have to have connections on several levels. In the framework employed in this research, three contexts are conceptualized at which the linkages can be planned: 1) the service policy context, 2) the process coordination context, and 3) the relationship management context. The service policy context consists of the planning methods by which a supplier analyzes its customers' logistics requirements and matches them with its own operational environment and efficiency requirements. The main conclusion related to the service policy context is that it is important to have a balanced selection of both customer-related and supplier-related factors in the analysis. This way, while the operational efficiency is planned a sufficient level of service for the most important customers is assured. This kind of policy planning involves taking multiple variables into the analysis, and there is a need to develop better tools for this purpose. Some new approaches to deal with this are presented in the thesis.The process coordination context and the relationship management context deal with the issues of how the implementation of the planned service policies can be facilitated in an inter-organizational environment. Process coordination includes typically such mechanisms as control rules, standard procedures and programs, but inhighly demanding circumstances more integrative coordination mechanisms may be necessary. In the thesis the coordination problems in third-party logistics relationship are used as an example of such an environment. Relationship management deals with issues of how separate companies organize their relationships to improve the coordination of their common processes. The main implication related to logistics planning is that by integrating further at the relationship level, companies can facilitate the use of the most efficient coordination mechanisms and thereby improve the implementation of the selected logistics service policies. In the thesis, a case of a logistics outsourcing relationship is used to demonstrate the need to address the relationship issues between the service provider andthe service buyer before the outsourcing can be done.The dissertation consists of eight research articles and a summarizing report. The principal emphasis in the articles is on the service policy planning context, which is the main theme of six articles. Coordination and relationship issues are specifically addressed in two of the papers.