Associations between alcohol consumption and selected cytokines in a Swiss population-based sample (CoLaus study).

To assess the associations between alcohol consumption and cytokine levels (interleukin-1beta - IL-1β; interleukin-6 - IL-6 and tumor necrosis factor-α - TNF-α) in a Caucasian population. Population sample of 2884 men and 3201 women aged 35-75. Alcohol consumption was categorized as nondrinkers, low (1-6 drinks/week), moderate (7-13/week) and high (14+/week). No difference in IL-1β levels was found between alcohol consumption categories. Low and moderate alcohol consumption led to lower IL-6 levels: median (interquartile range) 1.47 (0.70-3.51), 1.41 (0.70-3.32), 1.42 (0.66-3.19) and 1.70 (0.83-4.39) pg/ml for nondrinkers, low, moderate and high drinkers, respectively, p<0.01, but this association was no longer significant after multivariate adjustment. Compared to nondrinkers, moderate drinkers had the lowest odds (Odds ratio=0.86 (0.71-1.03)) of being in the highest quartile of IL-6, with a significant (p<0.05) quadratic trend. Low and moderate alcohol consumption led to lower TNF-α levels: 2.92 (1.79-4.63), 2.83 (1.84-4.48), 2.82 (1.76-4.34) and 3.15 (1.91-4.73) pg/ml for nondrinkers, low, moderate and high drinkers, respectively, p<0.02, and this difference remained borderline significant (p=0.06) after multivariate adjustment. Moderate drinkers had a lower odds (0.81 [0.68-0.98]) of being in the highest quartile of TNF-α. No specific alcoholic beverage (wine, beer or spirits) effect was found. Moderate alcohol consumption is associated with lower levels of IL-6 and (to a lesser degree) of TNF-α, irrespective of the type of alcohol consumed. No association was found between IL-1β levels and alcohol consumption.

Second-Order Approximation to the Rotemberg Model around a Distorted Steady State

Less is known about social welfare objectives when it is costly to change prices, as in Rotemberg (1982), compared with Calvo-type models. We derive a quadratic approximate welfare function around a distorted steady state for the costly price adjustment model. We highlight the similarities and differences to the Calvo setup. Both models imply inflation and output stabilization goals. It is explained why the degree of distortion in the economy influences inflation aversion in the Rotemberg framework in a way that differs from the Calvo setup.

Oxidative potential for fine/ultrafine particles in occupational situations

Introduction : The redox properties of fine/ultrafine particles as well as nanoparticles (NP) are suggested to be important to explain their biological activity and could constitute a novel and promising metric for hazard evaluation. The acellular in vitro dithiothreitol (DTT) assay allows measuring this property. Objectives : (1) to evaluate sampling requirements for fine/ultrafine particle allowing measurement of their oxidative potential (2) to apply the methodology to occupational situations where particle from combustion sources are generated. Material and method : Sampling parameters (type of filters and loaded amount) and storage duration affecting the DTT measurements were evaluated. Based on these results, a methodological approach was defined and applied in two occupational situations where diesel and other combustion particles are present (toll station in a tunnel and mechanical yard for bus reparation). Results : Teflon filters loaded with diesel particles were found more suitable for the DTT assay, due to their better chemical inertness compared to quartz filters: after storage durations larger than 150 hours, an increased reactivity toward DTT was observed only with quartz filters. Reactivity was linearly correlated to the loaded mass until about 1000 μg/filter. Different redox reactivities were determined in both working places, with the mechanical yard presenting a higher DTT consumption rate. Discussion and conclusions : These results demonstrate the feasibility of this method to determine the oxidative potential of fine/ultrafine particles in occupational situations. We propose to include this approach for hazard assessment of work places with exposure to manufactured and other NP.

On Measuring the Efficiency of Monetary Policy

Cecchetti et al. (2006) develop a method for allocating macroeconomic performance changes among the structure of the economy, variability of supply shocks and monetary policy. We propose a dual approach of their method by borrowing well-known tools from production theory, namely the Farrell measure and the Malmquist index. Following FÄare et al (1994) we propose a decomposition of the efficiency of monetary policy. It is shown that the global efficiency changes can be rewritten as the product of the changes in macroeconomic performance, minimum quadratic loss, and efficiency frontier.

Ordering Policy Rules with an Unconditional Welfare Measure

The unconditional expectation of social welfare is often used to assess alternative macroeconomic policy rules in applied quantitative research. It is shown that it is generally possible to derive a linear - quadratic problem that approximates the exact non-linear problem where the unconditional expectation of the objective is maximised and the steady-state is distorted. Thus, the measure of pol icy performance is a linear combinat ion of second moments of economic variables which is relatively easy to compute numerically, and can be used to rank alternative policy rules. The approach is applied to a simple Calvo-type model under various monetary policy rules.

What do we know about gliotransmitter release from astrocytes?

Astrocytes participate in information processing by actively modulating synaptic properties via gliotransmitter release. Various mechanisms of astrocytic release have been reported, including release from storage organelles via exocytosis and release from the cytosol via plasma membrane ion channels and pumps. It is still not fully clear which mechanisms operate under which conditions, but some of them, being Ca(2+)-regulated, may be physiologically relevant. The properties of Ca(2+)-dependent transmitter release via exocytosis or via ion channels are different and expected to produce different extracellular transmitter concentrations over time and to have distinct functional consequences. The molecular aspects of these two release pathways are still under active investigation. Here, we discuss the existing morphological and functional evidence in support of either of them. Transgenic mouse models, specific antagonists and localization studies have provided insight into regulated exocytosis, albeit not in a systematic fashion. Even more remains to be uncovered about the details of channel-mediated release. Better functional tools and improved ultrastructural approaches are needed in order fully to define specific modalities and effects of astrocytic gliotransmitter release pathways.

Diseño e implementación de un receptor multifrecuencia basado en muestreo paso banda aplicado al sistema Galileo

Este trabajo tiene como objetivo diseñar e implementar un receptor multifrecuencia requerido para aplicaciones Galileo centradas a realizar correcciones de errores y estudios de la ionosfera. Estas características obligan a buscar alternativas respecto los receptores superheterodinos convencionales dado que para éstos los retardos de propagación entre las diferentes bandas de interés son inaceptables. Por ello, se presenta un receptor basado en la técnica de muestreo paso banda, que permite trasladar el espectro mediante el conversor ADC a través de un aliasing intencionado, eliminando así los retardos de propagación entre bandas de interés, dado que todas se albergan en un mismo canal. En este trabajo nos hemos centrado únicamente en las etapas críticas del receptor presentado, siendo éstas la etapa de filtrado y conversión digital. La etapa de filtrado requerirá filtros muy selectivos, ya que el ruido existente fuera de banda se solapará a nuestra banda de interés, degradando la SNR del sistema a medida que tenga más potencia. Esta etapa se ha realizado mediante una estructura duplexora conjuntamente con dos filtros de líneas acopladas. La etapa de conversión se ha realizado fabricando el layout de un conversor comercial, del cual se ha validado el correcto funcionamiento para la aplicación requerida.

Design and evaluation of a solid sampler for the monitoring of airborne 1,6-hexamethylene diisocyanate (HDI) and its prepolymers in 2-component spray painting

An active, solvent-free solid sampler was developed for the collection of 1,6-hexamethylene diisocyanate (HDI) aerosol and prepolymers. The sampler was made of a filter impregnated with 1-(2-methoxyphenyl)piperazine contained in a filter holder. Interferences with HDI were observed when a set of cellulose acetate filters and a polystyrene filter holder were used; a glass fiber filter and polypropylene filter cassette gave better results. The applicability of the sampling and analytical procedure was validated with a test chamber, constructed for the dynamic generation of HDI aerosol and prepolymers in commercial two-component spray paints (Desmodur(R) N75) used in car refinishing. The particle size distribution, temporal stability, and spatial uniformity of the simulated aerosol were established in order to test the sample. The monitoring of aerosol concentrations was conducted with the solid sampler paired to the reference impinger technique (impinger flasks contained 10 mL of 0.5 mg/mL 1-(2-methoxyphenyl)piperazine in toluene) under a controlled atmosphere in the test chamber. Analyses of derivatized HDI and prepolymers were carried out by using high-performance liquid chromatography and ultraviolet detection. The correlation between the solvent-free and the impinger techniques appeared fairly good (Y = 0.979X - 0.161; R = 0.978), when the tests were conducted in the range of 0.1 to 10 times the threshold limit value (TLV) for HDI monomer and up to 60-mu-g/m3 (3 U.K. TLVs) for total -N = C = O groups.

An objective anisotropic elastic plastic model and Algorithm applicable to bone mechanics

The implicit projection algorithm of isotropic plasticity is extended to an objective anisotropic elastic perfectly plastic model. The recursion formula developed to project the trial stress on the yield surface, is applicable to any non linear elastic law and any plastic yield function.A curvilinear transverse isotropic model based on a quadratic elastic potential and on Hill's quadratic yield criterion is then developed and implemented in a computer program for bone mechanics perspectives. The paper concludes with a numerical study of a schematic bone-prosthesis system to illustrate the potential of the model.

Homotopy Batalin-Vilkovisky algebras

This paper provides an explicit cofibrant resolution of the operad encoding Batalin-Vilkovisky algebras. Thus it defines the notion of homotopy Batalin-Vilkovisky algebras with the required homotopy properties. To define this resolution we extend the theory of Koszul duality to operads and properads that are defined by quadratic and linear relations. The operad encoding Batalin-Vilkovisky algebras is shown to be Koszul in this sense. This allows us to prove a Poincaré-Birkhoff-Witt Theorem for such an operad and to give an explicit small quasi-free resolution for it. This particular resolution enables us to describe the deformation theory and homotopy theory of BV-algebras and of homotopy BV-algebras. We show that any topological conformal field theory carries a homotopy BV-algebra structure which lifts the BV-algebra structure on homology. The same result is proved for the singular chain complex of the double loop space of a topological space endowed with an action of the circle. We also prove the cyclic Deligne conjecture with this cofibrant resolution of the operad BV. We develop the general obstruction theory for algebras over the Koszul resolution of a properad and apply it to extend a conjecture of Lian-Zuckerman, showing that certain vertex algebras have an explicit homotopy BV-algebra structure.

Mapa web interactiu de Barcelona

L’objectiu principal d’aquest projecte és crear un sistema que permeti generar i gestionar un mapa de navegació interactiu per a la web i per qualsevol àmbit. Per aconseguir-ho, el projecte està dividit en dos parts: el mapa de navegació i el gestor de continguts. La primera part és una interfície gràfica on hi hauran diferents menús amb les seves categories, cadascuna amb els seus filtres, i per últim, un menú per seleccionar diferents nivells de zoom. El gestor de continguts, la segona part del projecte, és l’eina que permet gestionar via web tots els aspectes relacionats amb la configuració del mapa i la gestió de continguts (menús, punts del mapa, punts d’interès i rutes).

Regularity and mass conservation for discrete coagulation-fragmentation equations with diffusion

We present a new a-priori estimate for discrete coagulation fragmentation systems with size-dependent diffusion within a bounded, regular domain confined by homogeneous Neumann boundary conditions. Following from a duality argument, this a-priori estimate provides a global L2 bound on the mass density and was previously used, for instance, in the context of reaction-diffusion equations. In this paper we demonstrate two lines of applications for such an estimate: On the one hand, it enables to simplify parts of the known existence theory and allows to show existence of solutions for generalised models involving collision-induced, quadratic fragmentation terms for which the previous existence theory seems difficult to apply. On the other hand and most prominently, it proves mass conservation (and thus the absence of gelation) for almost all the coagulation coefficients for which mass conservation is known to hold true in the space homogeneous case.

Diseño de filtros de onda acústica basados en estructuras "half lattice"

En los últimos tiempos la telefonía móvil ha experimentado una reducción de los terminales gracias a la miniaturización de los filtros a frecuencias de microondas. Los filtros pasa banda más utilizados son los basados en la tecnología SAW, sin embargo son incompatibles con tecnologías de silicio y su comportamiento se degrada a frecuencias superiores de 3 GHz, por ello los estudios actuales se centran en la tecnología BAW. Las dos arquitecturas convencionales de filtros basados en resonadores BAW unidos eléctricamente son el ladder y lattice. Sin embargo, en este proyecto se estudiará la topología half lattice, la cual presenta un mejor comportamiento y unas dimensiones más reducidas. Para ello se obtendrán las ecuaciones de diseño del filtro, y con ellas se realizará la implementación a partir de la frecuencia central y el ancho de banda relativo.

Diseño de filtros transversales mediante el híbrido de 90º

Los filtros de microondas son uno de los elementos clave en el diseño de la mayoría de sistemas de RF que soportan servicios de telecomunicaciones modernos. Algunas de las aplicaciones actuales son, por ejemplo, los nuevos sistemas radar de banda ultra ancha (UWB – Ultra Wide Band) y sistemas de transmisión de servicios multimedia, donde se requieren dimensiones pequeñas del circuito, bajas pérdidas de inserción y una alta selectividad. Una de las tendencias que ha surgido como alternativa a las teorías clásicas de diseño de filtros, es el diseño de filtros basados en técnicas de señales interferentes, conocidos como filtros transversales. En esta memoria es muestra como diseñar un filtro transversal mediante el Híbrido de 90º y mediante el Híbrido de 90º con líneas acopladas, planteando 3 posibles soluciones de la ubicación de las líneas acopladas.

Application of standard and refined heat balance integral methods to one-dimensional Stefan problems

The work in this paper concerns the study of conventional and refined heat balance integral methods for a number of phase change problems. These include standard test problems, both with one and two phase changes, which have exact solutions to enable us to test the accuracy of the approximate solutions. We also consider situations where no analytical solution is available and compare these to numerical solutions. It is popular to use a quadratic profile as an approximation of the temperature, but we show that a cubic profile, seldom considered in the literature, is far more accurate in most circumstances. In addition, the refined integral method can give greater improvement still and we develop a variation on this method which turns out to be optimal in some cases. We assess which integral method is better for various problems, showing that it is largely dependent on the specified boundary conditions.