Termocromismo em soluções de alcóxidos de Vanádio(IV): uma abordagem pela modelagem molecular

The thermochromic behavior exhibited by vanadium(IV) alkoxides, [V2(μ-OPr i)2(OPr i) 6] and [V2(μ-ONep)2(ONep)6 ], OPr i = isopropoxide and ONep = neopentoxide, was studied by molecular modeling using DFT, TDDFT and INDO/S methods. The vibrational and electronic spectra calculated for [V2(μ-OPr i)2(OPr i) 6] were very similar to the experimental data registered for crystalline samples of the complex and for its solutions at low temperature (< 210 K), while spectra recorded at high temperature (> 315 K) were compatible with those calculated for the monomeric form, [V(OPr i)4]. These results consistently point to a monomer/dimer equilibrium as an explanation for the solution thermochromism of {V(OPr i)4}n. In spite of the structural similarity between [V2(μ-ONep)2(ONep)6 ] and [V2(μ-OPr i)2(OPr i) 6] in the solid state, the thermochromic behavior of the former could not be explained by the same model, and the possibility of tetranuclear aggregation at low temperatures was also investigated.

Concentrações e associações geoquímicas de Pb e Zn em sedimentos do rio São Francisco impactados por rejeitos da produção industrial de zinco

Surface sediments from the River São Francisco were analyzed to investigate the impact, due to the presence of metals (Cd, Cu, Pb, Zn) in wastes from a metallurgical industry in the city of Três Marias/MG, Brazil. The concentrations and geochemical associations of Pb, Zn and trace metals associated with the minerals employed in zinc production were measured. Sediments close to discharge locations were highly contaminated with Pb (332-512 μg g-1) and Zn (7872-10780 μg g-1), with values decreasing rapidly due to dilution and hydraulic sorting. Evaluation of toxicity according to the Consensus-based Sediment Quality Guidelines indicated for Cd, Pb and Zn a high probability of adverse effects on aquatic biota at these sites.

Aplicação de quitosana como suporte para a imobilização de enzimas de interesse industrial

Chitosan, poly[β-(1-4)-linked-2-amino-2-deoxy-D-glucose], is the N-deacetylated product of chitin which is a major component of arthropod and crustacean shells such as lobsters, crabs, shrimps, and cuttlefishes. In addition, chitosan has many significant biological and chemical properties such as biodegradability, biocompatibility and bioactivity as well as polycationic properties. Thus, it has been widely used in many industrial and biomedical applications including wastewater treatment, chromatographic support, carriers for controlled drug delivery and enzyme immobilization. This review is an insight into the exploitation of utilization of chitosan based-supports in different geometrical configurations on the immobilization of enzymes by different protocols for further application in biotransformation reactions.

Do engenho à biorrefinaria: a usina de açúcar como empreendimento industrial para a geração de produtos bioquímicos e biocombustíveis

A sugar cane mill is at the present moment a modest biorefinery producing few products such as sugar, ethanol and polyhydroxybutyrate (PHB). In the near future, this mill can expand its production using several renewable feedstock's to produce biofuels and high value biobased chemicals. However, the choice of appropriate products for addition to the portfolio is challenged by a lack of broad-based conversion technology coupled with a plethora of potential targets. The intent of this revision was to catalyze research efforts to expand the list of products and to present an updated evaluation of potential target structures for chemical production.

Uso de modelagem molecular no estudo dos conceitos de nucleofilicidade e basicidade

Molecular modeling enables the students to visualize the abstract relationships underlying theoretical concepts that explain experimental data on the molecular and atomic levels. With this aim we used the free software "Arguslab 4.0.1" (semi-empirical method) to study the reaction of 1-chloropropane with ethoxide in solution, known to lead to methyl propyl ether, through the S N2 mechanism, and propene, through the E2 mechanism. This tool allows users to calculate some properties (i. e. heat formation or electric charges) and to produce 3D images (molecular geometry, electrostatic potential surface, etc.) that render the comprehension of the factors underlying the reaction's progress, which are related to the structure of the reagents, and the process kinetic clearer and easier to understand by the students

Modelagem da cinética de biodegradação de paclobutrazol em dois solos do semiárido do nordeste brasileiro

Mathematical models can help to prevent high levels of toxic substances in soil or fruits of plants treated with pesticides and indicate that such substances should be systematically monitored. The aim of this research was to study the kinetics of paclobutrazol biodegradation by soil native bacteria using mathematical models. Three models were used to assess the kinetics of paclobutrazol biodegradation obtained experimentally. Excellent fits were obtained using dual kinetic and logistic models. The use of glycerol as additional carbon source increased the biodegradation of PBZ and consequently decreased the time required for a given PBZ initial concentration be halved.

Modelagem termodinâmica por extração por solvente de metais divalentes em meio sulfato usando D2EHPA

The extraction of divalent metals (Mn2+, Ni2+, Co2+ and Cu2+) in the system MSO4 - H2SO4 - H2O - D2EHPA in isoparaffin (17/21) was studied by a thermodynamic model based on chemical equilibria with mass and charge balance equations. The activity coefficients of all solutes in the aqueous phase were calculated by Davies equation. By applying this model, the equilibrium concentrations of solutes were calculated from de concentration of divalent metals and pH. The predicted distribution coefficients for the divalents metals were in good agreement with experimental results.

Inovação & propriedade industrial & indústria química

ABSTRACT The main aim of this paper was to contribute to reflections in Brazil on the need to transfer knowledge held at universities and R&D institutions over to companies, i.e. to transfer scientific knowledge of chemistry to technology. It discusses how the competitiveness of countries is increasingly dependent on their technological capacity. The chemicals industry is a fundamental driver of social, environmental, economic and industrial indicators of sustainable development. In Brazil, the chemicals industry's deficit has grown over the last three decades. Patents are important sources of information because patent documents contain 75% of all technological information available. The National Institute of Industrial Property in Brazil has created a Technology Observatory with the purpose of identifying and analyzing technological information contained in patent documents within the ambit of partnerships with government entities or business associations, in order to support their technology-related decision-making processes. The paper gives examples of ethanol and biotechnology patent documents, including pharmaceuticals, of which there are very few in Brazil. However, a few of the patent applications identified are filed in Brazil, giving the country the opportunity to transform this scientific knowledge into technology by means of partnership agreements with companies. Finally, the paper presents information on the patent applications filed by the world's leading chemicals companies as measured by their revenues, and the respective numbers of patent applications in the last five years in organic chemistry and polymers, sectors in which Brazil is currently dependent on imports for over 50% of its needs. The patent assignees in these sectors in Brazil are also identified, and the paper concludes that Brazil needs to invest in the development of professionals, providing clearly-defined career paths in technology innovation teams at R&D institutions, and to foster more initiatives such as the creation of a new research and innovation entity, EMBRAPII, since investing in science and technology is a prerequisite for knowledge production, industrial property, economic development and, consequently, the competitiveness of the country.

Application of fourier transform infrared spectroscopy, chemical and chemometrics analyses to the characterization of agro-industrial waste

Agroindustrial waste in general presents significant levels of nutrients and organic matter and has therefore been frequently put to agricultural use. In this context, the objective of this study was to determine the chemical composition, nitrogen, phosphorus, potassium, calcium, magnesium and carbon content, as well as the qualitative characteristics through Fourier transform infrared spectroscopy of four samples of poultry litter and one sample of cattle manure, from the southwestern region of Paraná, Brazil. Results revealed that, in general, the poultry litter presented higher amount of nutrients and carbon than the cattle manure. The infrared spectra allowed identification of the functional groups present and the differences in degree of sample humification. The statistical treatment confirmed the quantitative and qualitative differences revealed.

REDUÇÃO DE VARIÁVEIS DE ENTRADA DE REDES NEURAIS ARTIFICIAIS A PARTIR DE DADOS DE ANÁLISE DE COMPONENTES PRINCIPAIS NA MODELAGEM DE OXIGÊNIO DISSOLVIDO

The objective of this work is to demonstrate the efficient utilization of the Principal Components Analysis (PCA) as a method to pre-process the original multivariate data, that is rewrite in a new matrix with principal components sorted by it's accumulated variance. The Artificial Neural Network (ANN) with backpropagation algorithm is trained, using this pre-processed data set derived from the PCA method, representing 90.02% of accumulated variance of the original data, as input. The training goal is modeling Dissolved Oxygen using information of other physical and chemical parameters. The water samples used in the experiments are gathered from the Paraíba do Sul River in São Paulo State, Brazil. The smallest Mean Square Errors (MSE) is used to compare the results of the different architectures and choose the best. The utilization of this method allowed the reduction of more than 20% of the input data, which contributed directly for the shorting time and computational effort in the ANN training.

Improving demand forecasting practices in the industrial context

Demand forecasting is one of the fundamental managerial tasks. Most companies do not know their future demands, so they have to make plans based on demand forecasts. The literature offers many methods and approaches for producing forecasts. When selecting the forecasting approach, companies need to estimate the benefits provided by particular methods, as well as the resources that applying the methods call for. Former literature points out that even though many forecasting methods are available, selecting a suitable approach and implementing and managing it is a complex cross-functional matter. However, research that focuses on the managerial side of forecasting is relatively rare. This thesis explores the managerial problems that are involved when demand forecasting methods are applied in a context where a company produces products for other manufacturing companies. Industrial companies have some characteristics that differ from consumer companies, e.g. typically a lower number of customers and closer relationships with customers than in consumer companies. The research questions of this thesis are: 1. What kind of challenges are there in organizing an adequate forecasting process in the industrial context? 2. What kind of tools of analysis can be utilized to support the improvement of the forecasting process? The main methodological approach in this study is design science, where the main objective is to develop tentative solutions to real-life problems. The research data has been collected from two organizations. Managerial problems in organizing demand forecasting can be found in four interlinked areas: 1. defining the operational environment for forecasting, 2. defining the forecasting methods, 3. defining the organizational responsibilities, and 4. defining the forecasting performance measurement process. In all these areas, examples of managerial problems are described, and approaches for mitigating these problems are outlined.

Controle da requeima em tomateiro industrial com fungicidas e silicato de potássio

O objetivo deste trabalho foi avaliar o efeito da aplicação de fungicidas e silicato de potássio, no controle da requeima (Phytophthora infestans), em tomateiro industrial. Os fungicidas foram aplicados com base no sistema de previsão de Wallin e calendário fixo de pulverizações. Empregou-se o delineamento em blocos casualizados com 6 tratamentos e 4 repetições. Os tratamentos (T) foram: T1 - testemunha; T2 - dimetomorfe + clorotalonil (valores de severidade da doença (VSD = 10) + metiram; T3 - metalaxil-M + clorotalonil (VSD = 10) + metiram (o metiram foi aplicado somente na semana onde o VSD não atingiu o valor requerido para o tratamento); T4 - calendário fixo: dimetomorfe + clorotalonil, mancozeb, metalaxil-M + clorotalonil e clorotalonil, alternados semanalmente; T5 - silicato de potássio (5 g/L) e T6 - silicato de potássio (15 g/L). A severidade foi avaliada utilizando-se uma escala descritiva variando de 0 a 100 %. A severidade final foi: 100; 2,6; 12,3; 5,5; 97,6 e 96 %, respectivamente, nos tratamentos T1, T2, T3, T4, T5 e T6. A severidade foi em média, 93 % menor nos tratamentos que receberam aplicações de fungicidas em relação a testemunha. Dentre os tratamentos que empregaram sistema de previsão o 2 apresentou melhor resultado do que o 3. O tratamento 2 apresentou eficiência comparável ao calendário semanal (tratamento 4), apresentando produtividades de 62.103,73 e 52.473,33 kg/ha, respectivamente, sendo superiores aos demais tratamentos. Aplicações de silicato de potássio nas duas doses testadas não diferiram significativamente da testemunha, indicando a ineficiência do produto em controlar a requeima.

Segmentation of Industrial Customers – Case: Finnish Mechanical Engineering Companies

Segmentointi on perinteisesti ollut erityisesti kuluttajamarkkinoinnin työkalu, mutta siirtymä tuotteista palveluihin on lisännyt segmentointitarvetta myös teollisilla markkinoilla. Tämän tutkimuksen tavoite on löytää selkeästi toisistaan erottuvia asiakasryhmiä suomalaisen liikkeenjohdon konsultointiyritys Synocus Groupin tarjoaman case-materiaalin pohjalta. K-means-klusteroinnin avulla löydetään kolme potentiaalista markkinasegmenttiä perustuen siihen, mitkä tarjoamaelementit 105 valikoitua suomalaisen kone- ja metallituoteteollisuuden asiakasta ovat maininneet tärkeimmiksi. Ensimmäinen klusteri on hintatietoiset asiakkaat, jotka laskevat yksikkökohtaisia hintoja. Toinen klusteri koostuu huolto-orientoituneista asiakkaista, jotka laskevat tuntikustannuksia ja maksimoivat konekannan käyttötunteja. Tälle kohderyhmälle kannattaisi ehkä markkinoida teknisiä palveluja ja huoltosopimuksia. Kolmas klusteri on tuottavuussuuntautuneet asiakkaat, jotka ovat kiinnostuneita suorituskyvyn kehittämisestä ja laskevat tonnikohtaisia kustannuksia. He tavoittelevat alempia kokonaiskustannuksia lisääntyneen suorituskyvyn, pidemmän käyttöiän ja alempien huoltokustannusten kautta.

Use Of Systems Approach with Total Quality Management in Industrial Organizations

The objective of the work has been to study why systems thinking should be used in combination with TQM, what are the main benefits of the integration and how it could best be done. The work analyzes the development of systems thinking and TQM with time and the main differences between them. The work defines prerequisites for adopting a systems approach and the organizational factors which embody the development of an efficient learning organization. The work proposes a model based on combination of an interactive management model and redesign to be used for application of systems approach with TQM in practice. The results of the work indicate that there are clear differences between systems thinking and TQM which justify their combination. Systems approach provides an additional complementary perspective to quality management. TQM is focused on optimizing operations at the operational level while interactive management and redesign of organization are focused on optimization operations at the conceptual level providing a holistic system for value generation. The empirical study demonstrates the applicability of the proposed model in one case study company but its application is tenable and possible also beyond this particular company. System dynamic modeling and other systems based techniques like cognitive mapping are useful methods for increasing understanding and learning about the behavior of systems. The empirical study emphasizes the importance of using a proper early warning system.

Developing the service offering of an industrial company

The purpose of this thesis was to determine, what kind of service offering the case company should provide to its customers in the Australian market. For this, a model for analysing the competitive environment was developed. In the model, three players were considered: customers, competitors and the case company. Benchmarking was used in identifying competitors’ offerings currently available in the market. Experts inside the case company were consulted for determining the customer need. The competitors’ offerings were analysed on the basis of Pekkarinen et al.’s (2009) framework, dividing the offerings to services supporting the supplier’s product (SSP), supporting the client (SSC), supporting the client’s network (SSN), supporting mutual actions (SSM) and benefit and risk sharing elements. After this, they were compared to the competitive environment in order to identify areas where the case company can differentiate itself from its competitors in the Australian market. On the basis of the company’s key success factors, and the Finnish service concept currently in use, some additional offerings were suggested for the case company in order to further outperform its competitors in the market. Finally, on the basis of the suggested offerings and competitors’ offerings, a service concept was suggested for the case company to introduce in the Australian market.