Development of a model for occupational risk acceptance criteria definition in industrial settings

Doctoral Dissertation for PhD degree in Industrial and Systems Engineering

Treating the entire person

[Excerpt] A critical case from a Portuguese hospital reveals how the ultimate healthcare customer, the patient, is a complete system, not a jumble of parts. (...) The lean production philosophy has made inroads into service sectors, including medical care in the United Kingdom and the United States. Unfortunately, numerous medical organizations in those two countries and the rest of the world treat patients like they are made up of parts, not as a whole system. This leads to disjointed handoffs, bottlenecks in information flow that delay treatment, and sending the patient back and forth from department to department. The following case in Portugal shows how most of the world’s health systems still suffer from functional silos and how waste is all over the place. In this case, the missing links in communication between doctors, nurses, auxiliary staff, the patient and her family led to the patient’s death. Adopting lean healthcare with its proven tools would be a solution to many of the problems described. When a patient dies in a hospital, the family often is told that the doctors did everything they could. Normally, that is the case, as healthcare providers – doctors, nurses, auxiliary staff, therapists – do their best with the system they have.

Upgrade of an industrial building: BIM model of the as-built situation and evaluation of modifications

Dissertação de mestrado integrado in Civil Engineering

A proteção cumulativa do design pelo Direito de Autor e pelo Direito da Propriedade Industrial: o caso especial do contrato de trabalho

Dissertação de mestrado em Direito dos Contratos e das Empresas

Feasibility of internally stiffened thin-walled beams for industrial applications

Several types of internally reinforced thin-walled beams are subjected to a feasibility evaluation of its mechanical behavior for industrial applications. The adapting of already existing efficient sandwich geometries to hollow-box beams of larger dimensions may reveal promising results. Novel types of sandwich beams under bending and torsion uncoupled loadings are studied in terms of stiffness behavior in static analysis. For the analysis of the solutions, the models are built using the Finite Element Method (FEM) software ANSYS Mechanical APDL. The feasibility of the novel beams was determined by the comparison of the stiffness behavior of the novel hollow-box beams with conventional hollow-box beams. An efficiency parameter was defined in order to determine the feasibility. It is found that the novel geometries represent an excellent improvement under bending loadings, better than under torsion loadings. Nevertheless, for bending and torsion combined loadings, if bending loads are predominant, the beams can still be interesting for some applications, in particular those with mobile parts.

A UML-based approach for modeling industrial control applications

The main purpose of the poster is to present how the Unified Modeling Language (UML) can be used for diagnosing and optimizing real industrial production systems. By using a car radios production line as a case study, the poster shows the modeling process that can be followed during the analysis phase of complex control applications. In order to guarantee the continuity mapping of the models, the authors propose some guidelines to transform the use cases diagrams into a single object diagram, which is the main diagram for the next phases of the development.

Valorization of agro-industrial wastes towards the production of rhamnolipids

In this work, oil mill wastewater (OMW), a residue generated during olive oil extraction, was evaluated as an inducer of rhamnolipid production. Using a medium containing as sole ingredients corn steep liquor (10%, v/v), sugarcane molasses (10%, w/v) and OMW (25%, v/v), Pseudomonas aeruginosa #112 produced 4.5 and 5.1 g of rhamnolipid per liter in flasks and reactor, respectively, with critical micelle concentrations as low as 13 mg/l. Furthermore, in the medium supplemented with OMW, a higher proportion of more hydrophobic rhamnolipid congeners was observed comparing with the same medium without OMW. OMW is a hazardous waste which disposal represents a serious environmental problem; therefore, its valorization as a substrate for the production of added-value compounds such as rhamnolipids is of great interest. This is the first report of rhamnolipid production using a mixture of these three agro-industrial by-products, which can be useful for the sustainable production of rhamnolipids.

A quantitative research about attitudes of pre-service teachers on inclusive education

In this paper we propose to characterize the inclusive philosophy in Thailand as well as to present and discuss results from a quantitative research carried out within the teacher pre-service context, viewed as one of the components that should be addressed by school systems that seek to be inclusive.

Modelação de processos num serviço de uma organização de ensino superior

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

Aplicação do paradigma Lean em processos clínicos do Centro Hospitalar do Alto Ave

Dissertação de mestrado em Engenharia Industrial

Impact of nutritional counseling in reducing serum cholesterol in public health service patients

OBJECTIVE: To assess the impact of nutritional attention on the lipid profile and nutritional status of hypercholesterolemic patients attended in health centers of Belo Horizonte. METHODS: Using nutritional attendance patient record cards from two health units, the evolution of the lipid profile and the nutritional state (BMI) was monitored of 96 hypercholesterolemic patients who received diet. The patients were appraised at the following moments: initial (1st consultation), after 3 months (2nd consultation) and last consultation (variable for each patient). RESULTS: On the first attendance, 44,4% of the patients presented not only high total cholesterol and LDL-c, but also hypertriglyceridemia and 70.3% were overweight or obese, but most patients (75.6%) presented adequate HDL-c levels. There was significant reduction in the BMI, total cholesterol, LDL-c values (p < 0.01) and also in the triglyceride levels (p < 0.05) in the first three months, without alteration in the HDL-c levels. A significant reduction (p < 0.01) was observed in the frequency of individuals with high cholesterol (from 89.6% down to 47.9%), high and very high LDL-c (from 82.6% down to 45.7%), as well as high and very high triglyceride (from 43.6% down to 16.7%). The observed reduction in frequency of the low HDL-c was statistically meaningless. CONCLUSION: This study evidences the effect of the nutritional attention on lipid profile in hypercholesterolemic patients, reinforcing the need for a multiprofessional team to attend them at the public health services.

Comportamentos de adoção a um novo serviço de transporte : Carsharing

Mestrado Gestão e Estratégia Industrial

Horário por turnos : análise do seu efeito numa empresa do sector industrial

O presente estudo teve por objetivo analisar os possíveis efeitos do trabalho por turnos, incluindo o turno noturno, a nível da saúde, vida familiar e social, numa empresa do sector da indústria. Foi construído um questionário que abordava questões relativas aos dados sociodemográficos, organização temporal do trabalho, qualidade do sono, exigências da tarefa e envolvimento, saúde, vida familiar e social, e posteriormente foi aplicado a uma amostra de 24 trabalhadores com idades entre os 29 e os 52 anos (41,58±5,79 anos). Os resultados mostram uma tendência para doenças como a obesidade, colesterol elevado e manifestação de sintomas relacionados com problemas digestivos nos trabalhadores que trabalham por turnos à [sic] mais anos. Antes do primeiro turno noturno o tempo de sono é bastante reduzido e fica aquém do tempo que os trabalhadores sentem que necessitam dormir para se sentirem bem. O turno da tarde é o que permite os trabalhadores ficarem com um tempo de sono mais próximo desse “ideal”. Em relação à idade, todos os trabalhadores do grupo etário mais velho manifestam interrupções do sono diurno. Também se verifica um maior descontentamento destes trabalhadores com o tempo livre para realizar atividades que tragam bem-estar. Este estudo contribui para o conhecimento da realidade do trabalho por turnos na indústria e espera-se que desperte a procura de soluções que otimizem a vida destes trabalhadores.