998 resultados para Fontes de alimentação
Resumo:
A field experiment was conducted in Sapezal, Mato Grosso state, Brazil, in 2007/2008, with the purpose of determining the effect of potassium sources on yield components, yield, fiber quality and economical aspects of cotton (Gossypium hirsutum L.). A randomized complete block experimental design was used, with five replications. The treatments consisted of application in covering, via soil, at rate of 100 kg ha(-1) of K(2)O, in two split applications, of the sources KCl, K(2)SO(4), KNO(3) and K(2)SO(4).2MgSO(4). The number of nodes, height, number of bolls in the superior third and the weight of boll in the medium third was higher with K(2)SO(4).2MgSO(4) than with KNO(3) source. The potassium fertilizers did not influence the fiber revenue, but the fertilizing with K(2)SO(4).2MgSO(4) source had higher cotton seed yield and lint yield, although the uniformity ratio of fibber and profitability were smaller in relation to K(2)SO(4). The fibber agio index was higher with KNO(3) source. The production cost was higher with K(2)SO(4).2MgSO(4) source and in function of the smallest production cost, KCl source presented superior liquid revenue than other treatments.
Resumo:
A field experiment was conducted in Sapezal, Mato Grosso state, Brazil, in the 2007/2008 agricultural season, with the aim of determining the effect of potassium sources on cotton nutritional status. The treatments consisted of application in covering, via soil, at rate of 100 kg ha(-1) of K(2)O. in two split applications, with KCl, K(2)SO(4), KNO(3) and K(2)SO(4).2MgSO(4) sources. Nutrients concentration in leaf tissues at bloom stage was evaluated, being interpreted by the critical level and the DRIS methods. S content in cotton leaves and the S index was higher when used K(2)SO(4).2MgSO(4) fertilizer. The Nutritional Balance Index (NB!) values were coherent with cotton yield, being the highest yields obtained with the smallest NBI in the covering fertilization with K(2)SO(4).2MgSO(4).
Resumo:
Boron (B) fertilization can result in high yield and better sweet potato storage roots quality. However, there is few works about this subject. The objective was to evaluate the yield of sweet potato crops in response to B sources, rates and application form. The experimental design was complete randomized blocks, in factorial outline ((2x2x2)+1), with three replications, which resulted of the combination of sources of B (boric acid and borax), application form (via soil and via foliar) and doses of B (1 and 2 kg ha(-1)) and a control treatment (without B). There was no interaction between the factors studied for the commercial yield of sweet potato. No significant differences was found between B sources and application form, but they showed higher yield than the control treatment. Additionally, sweet potato yield increade with application of 2 kg ha(-1) of B.
Resumo:
This work studies the development, implementation and improvement of a macroscopic model to describe the behavior of the spouted bed dryer with continuous feeding for pastes and suspensions drying. This model is based on the CST model (Freire et al., 2009) and the model of Fernandes (2005), whose theoretical foundation is based on macroscopic mass and heat balances for the three phases involved in the process: gas, liquid and solid. Because this technique is quite relevant, the studies of modeling and simulation of spouted bed drying are essential in the analysis of the process as a whole, because through them it is possible to predict and understand the behavior of the process, which contributes significantly to more efficient project and operation. The development and understanding of the phenomena involved in the drying process can be obtained by comparing the experimental data with those from computer simulations. Such knowledge is critical for choosing properly the process conditions in order to obtain a good drying efficiency. Over the past few years, researches and development of works in the field of pastes and suspensions drying in spouted bed has been gaining ground in Brazil. The Particulate Systems Laboratory at Universidade Federal do Rio Grande do Norte, has been developing several researches and generating a huge collection of experimental data concerning the drying of fruit pulps, vegetables pastes, goat milk and suspensions of agro-industrial residues. From this collection, some data of goat milk and residue from acerola (Malpighia glabra L.) drying were collected. For the first time, these data were used for the development and validation of a model that can describe the behavior of spouted bed dryer. Thus, it was possible to model the dryer and to evaluate the influence of process variables (paste feeding, temperature and flow rate of the drying air) in the drying dynamics. We also performed water evaporation experiments in order to understand and to study the behavior of the dryer wall temperature and the evaporation rate. All these analysis will contribute to future works involving the implementation of control strategies in the pastes and suspensions drying. The results obtained in transient analysis were compared with experimental data indicating that this model well represents the process
Resumo:
No programa de pesquisa a respeito da adubação da cultura de trigo, utilizando isotopos (32P e 15N), o plano do ano 1971/1972 tinha, entre outros objetivos, a finalidade de determinar a porcentagem de aproveitamento do fósforo pelo trigo, em função do modo de aplicação e interação com fontes de nitrogênio. Oexperimento foi instalado em solo pertencente a ordem Ultisol e grande grupo Podzólico Vermelho-Amarelo (Pelotas-RS), contendo 9 ppm de P. Os adubos nitrogenados: sulfato de amônio, uréia e nitrato de amônio, na dose de 120 kg/ha, foram aplicados metade no plantio (ao lado e abaixo das sementes) e metade em cobertura, na fase do perfilhamento. O fósforo radioativo, na forma de superfosfato simples, foi aplicado na dose de 30 kg P2O5/ha de duas maneiras: junto com as sementes ou junto com o adubo nitrogenado aplicado no plantio. Amostras de plantas de trigo foram coletadas entre perfilhamento e espigamento e determinaram-se os pesos de matéria verde e seca, as porcentagens de P total e de P proveniente do fertilizante contidos na matéria seca e a porcentagem de utilização do fósforo aplicado (% UP). Pode-se concluir que a aplicação de nitrogênio é necessário para se obter maio res % UP, mas não há diferenças entre as fontes. Os modos de aplicação do fósforo não diferiram entre si quanto a % UP.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Em solos ácidos, a prática da calagem superficial favorece o crescimento radicular, principalmente na superfície do solo, bem como a produtividade das culturas em condições normais de precipitação pluviométrica. Entretanto, pouco se sabe sobre a adoção desta prática e suas eventuais ações, no solo e nas plantas, em relação a outras fontes de corretivos. O objetivo do trabalho foi avaliar o efeito da aplicação superficial de diferentes corretivos nos atributos químicos do solo, no crescimento radicular, da parte aérea e na produtividade da aveia preta. O trabalho foi desenvolvido em campo sobre Latossolo Vermelho distrófico, durante o ano agrícola de 2004, dois anos após a aplicação superficial dos corretivos, no sistema plantio direto. Os tratamentos constituíram da aplicação superficial de calcário dolomítico, escoria de aciaria - E, lama cal - Lcal, lodo de esgoto centrifugado - LC e sem aplicação de corretivo, em delineamento em blocos casualizados com quatro repetições. A aplicação superficial de calcário, escória de aciaria, lama cal, lodo de esgoto centrifugado permitiu o aumento nos valores de pH, no teor de Ca, na maior disponibilidade de P e na redução dos teores de Al no solo. O crescimento do sistema radicular, o desenvolvimento da parte aérea e a produtividade da aveia preta foram incrementados com a aplicação superficial dos corretivos de acidez no sistema plantio direto.
Resumo:
This work presents a spray-dryer designed to oxalate-niobate precursors and suitable for the production of Niobium Carbide. The dryer was intended to produce powders of controlled particle size. First, the precursor is dissolved in water to produce a solution of known concentration and then it is atomized on the spray-dryer to produce the powder. This equipment consists of a 304 stainless steel chamber, 0.48 m x 1.9 m (diameter x length), with a conical shape at the lower portion, which is assembled on a vertical platform. The chamber is heated by three 4 kW electrical resistances. In this process, drying air is heated as it flows inside a serpentine surrounding the chamber, in contrary to more traditional processes in which the hot drying air is used to heat the component. The air enters the chamber at the same temperature of the chamber, thus avoiding adherence of particles on the internal surface. The low speed flow is concurrent, directed from the top to the bottom portion of the chamber. Powders are deposited on a 0.4 m diameter tray, which separates the cylindrical portion from the conical portion of the chamber. The humid air is discharged though a plug placed underneath the collecting tray. A factorial experimental planning was prepared to study the influence of five parameters (concentration, input flow, operation temperature, drying air flow and spray air flow) on the characteristics of the powders produced. Particle size distribution and shape were measured by laser granulometry and scanning electronic microscopy. Then, the powders are submitted to reaction in a CH4 / H2 atmosphere to compare the characteristics of spray-dried powders with powders synthetizided by conventional methods
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
The use of the History and the Philosophy of Science (HPS) for the teaching of science and scientific subjects has been advocated in recent decades. It has been pointed out that the History of Science could make for a deeper learning of scientific concepts, since it would promote a contact with the problems which that knowledge has set out to solve. Furthermore, historical episodes would serve to put the discussions about the nature of scientific knowledge into context. With a view to explore those potentialities, the literature in the field has sought to identify the challenges and obstacles for the didactic transposition of subjects from the History of Science. Amongst many aspects, the deficiencies in the training of teachers, so that they can work with the insertion of HPS in the classroom have been highlighted. Another aspect that has been mentioned to be a challenge has to do with the didactic transposition of the Primary Sources, that is, of the original texts on the History of Science. The Primary Sources have significant potentialities: making a connection possible between scientists and concepts, showing the difficulties faced during scientific endeavors, perceiving the role of mistakes as obstacles to be surpassed, not as defeat, etc. On the other hand, there has been little exploration of these concepts in an educational context, due to their own peculiarities. The original texts are often hard to understand and their interpretation demands knowledge of the historical and scientific context in which they were written, as well as skills pertaining to the conduction of research in the field of the History of Science. With this scenario in mind, the research towards this Professional MSc degree starts from the challenge of elaborating and discussing proposals which could enable the didactical transposition of the Primary Sources. We have worked specifically with Primary Sources on the History of the Vacuum and of the Atmospheric Pressure, because of the insertion of these subjects in the Brazilian High School curriculum, in connection with the didactical textbooks. "Historic Journals" were made up from clippings of the original historical texts, as was a Didactical Unit, which takes the usual textbooks as a basis and contemplates using the Journals and the entire Primary Sources in High School. At last, we have elaborated and implemented a course designed for the preparation of teachers and for being an opportunity for the discussion of the feasibility of putting these kinds of proposal into practice
Resumo:
Objetivou-se identificar os conhecimentos e as práticas relacionados à alimentação de crianças entre zero e três anos, a fim de complementar a formação das profissionais que trabalham com crianças, na área da educação nutricional. O procedimento metodológico seguiu as orientações do estudo de caso, com abordagem qualitativa. Os saberes e as práticas das participantes do estudo foram analisados por meio de questões abertas e fechadas e das observações dos tópicos relacionados à nutrição infantil, juntamente com os dados sobre a formação dessas profissionais. Pode-se concluir que tanto as agentes educacionais quanto as professoras de Ensino Infantil são detentoras de um conhecimento sobre Nutrição Infantil, porém a preocupação maior destas foi atender as necessidades nutricionais das crianças por meio de uma boa alimentação, deixando, em segundo plano, as atividades pedagógicas, as quais poderiam ser realizadas em um programa de educação nutricional, construído coletivamente e inserido no projeto político-pedagógico da escola.
Resumo:
The great majority of analytical models for extragalactic radio sources suppose self-similarity and can be classified into three types: I, II and III. We have developed a model that represents a generalization of most models found in the literature and showed that these three types are particular cases. The model assumes that the area of the head of the jet varies with the jet size according to a power law and the jet luminosity is a function of time. As it is usually done, the basic hypothesis is that there is an equilibrium between the pressure exerted both by the head of the jet and the cocoon walls and the ram pressure of the ambient medium. The equilibrium equations and energy conservation equation allow us to express the size and width of the source and the pressure in the cocoon as a power law and find the respective exponents. All these assumptions can be used to calculate the evolution of the source size, width and radio luminosity. This can then be compared with the observed width-size relation for radio lobes and the power-size (P-D) diagram of both compact (GPS and CSS) and extended sources from the 3CR catalogue. In this work we introduce two important improvement as compared with a previous work: (1)We have put together a larger sample of both compact and extended radio sources
Resumo:
This work is a detailed study of self-similar models for the expansion of extragalactic radio sources. A review is made of the definitions of AGN, the unified model is discussed and the main characteristics of double radio sources are examined. Three classification schemes are outlined and the self-similar models found in the literature are studied in detail. A self-similar model is proposed that represents a generalization of the models found in the literature. In this model, the area of the head of the jet varies with the size of the jet with a power law with an exponent γ. The atmosphere has a variable density that may or may not be spherically symmetric and it is taken into account the time variation of the cinematic luminosity of the jet according to a power law with an exponent h. It is possible to show that models Type I, II and III are particular cases of the general model and one also discusses the evolution of the sources radio luminosity. One compares the evolutionary curves of the general model with the particular cases and with the observational data in a P-D diagram. The results show that the model allows a better agreement with the observations depending on the appropriate choice of the model parameters.
Resumo:
Este estudo teve como objetivos determinar o perfil e o estado nutricional da clientela e a composição química e nutricional das refeições oferecidas no restaurante universitário da Universidade Estadual Paulista de Araraquara, Brasil. Realizou-se a determinação química do teor de proteínas, lipídios, carboidratos, fibra, cinzas e umidade de amostras das refeições fornecidas. A amostra populacional foi constituída de 403 usuários (212 mulheres e 191 homens). em relação ao perfil do usuário, constatou-se que 82,60% encontravam-se na faixa etária de 18 a 25 anos e 75,44% dos indivíduos apresentaram índice de massa corporal dentro da faixa de normalidade. em média, as refeições continham 4,74% de proteínas, 10,84% de lipídeos, 24,32% de carboidratos, 3,30% de fibras, 1,00% de cinzas e 55,00% de umidade. Os dados mostraram que as refeições do restaurante universitário continham excesso de proteínas e de energia e que se faz necessário realizar ajustes na sua composição para adequá-la ao perfil da clientela atendida.
Resumo:
Double radio sources have been studied since the discovery of extragalactic radio sources in the decade of 1930. Since then, several numerical studies and analytical models have been proposed seeking a better understanding of the physical phenomena that determines the origin and evolution of such objects. In this thesis, we intended to study the evolution problem of the double radio sources in two fronts: in the ¯rst we have developed an analytical self-similar model that represents a generalization of most models found in the literature and solve some existent problems related to the jet head evolution. We deal with this problem using samples of hot spot sizes to ¯nd a power law relation between the jet head dimension and the source length. Using our model, we were able to draw the evolution curves of the double sources in a PD diagram for both compact sources (GPS and CSS) and extended sources of the 3CR catalogue. We have alson developed a computation tool that allows us to generate synthetic radio maps of the double sources. The objective is to determine the principal physical parameters of those objects by comparing synthetic and observed radio maps. In the second front, we used numeric simulations to study the interaction of the extra- galactic jets with the environment. We simulated situations where the jet propagates in a medium with high density contrast gas clouds capable to block the jet forward motion, forming the distorted structures observed in the morphology of real sources. We have also analyzed the situation in which the jet changes its propagation direction due to a change of the source main axis, creating the X-shaped sources. The comparison between our simulations and the real double radio sources, enable us to determine the values of the main physical parameters responsible for the distortions observed in those objects