Plutonium release from Fukushima Daiichi fosters the need for more detailed investigations

The contamination of Japan after the Fukushima accident has been investigated mainly for volatile fission products, but only sparsely for actinides such as plutonium. Only small releases of actinides were estimated in Fukushima. Plutonium is still omnipresent in the environment from previous atmospheric nuclear weapons tests. We investigated soil and plants sampled at different hot spots in Japan, searching for reactor-borne plutonium using its isotopic ratio Pu-240/Pu-239. By using accelerator mass spectrometry, we clearly demonstrated the release of Pu from the Fukushima Daiichi power plant: While most samples contained only the radionuclide signature of fallout plutonium, there is at least one vegetation sample whose isotope ratio (0.381 +/- 0.046) evidences that the Pu originates from a nuclear reactor (Pu239+240 activity concentration 0.49 Bq/kg). Plutonium content and isotope ratios differ considerably even for very close sampling locations, e.g. the soil and the plants growing on it. This strong localization indicates a particulate Pu release, which is of high radiological risk if incorporated.

AIR SIDE HEAT TRANSFER ENHANCEMENT IN HEAT EXCHANGERS UTILIZING INNOVATIVE DESIGNS AND THE ADDITIVE MANUFACTURING TECHNIQUE

Over the last decade, rapid development of additive manufacturing techniques has allowed the fabrication of innovative and complex designs. One field that can benefit from such technology is heat exchanger fabrication, as heat exchanger design has become more and more complex due to the demand for higher performance particularly on the air side of the heat exchanger. By employing the additive manufacturing, a heat exchanger design was successfully realized, which otherwise would have been very difficult to fabricate using conventional fabrication technologies. In this dissertation, additive manufacturing technique was implemented to fabricate an advanced design which focused on a combination of heat transfer surface and fluid distribution system. Although the application selected in this dissertation is focused on power plant dry cooling applications, the results of this study can directly and indirectly benefit other sectors as well, as the air-side is often the limiting side for in liquid or single phase cooling applications. Two heat exchanger designs were studied. One was an advanced metallic heat exchanger based on manifold-microchannel technology and the other was a polymer heat exchanger based on utilization of prime surface technology. Polymer heat exchangers offer several advantages over metals such as antifouling, anticorrosion, lightweight and often less expensive than comparable metallic heat exchangers. A numerical modeling and optimization were performed to calculate a design that yield an optimum performance. The optimization results show that significant performance enhancement is noted compared to the conventional heat exchangers like wavy fins and plain plate fins. Thereafter, both heat exchangers were scaled down and fabricated using additive manufacturing and experimentally tested. The manifold-micro channel design demonstrated that despite some fabrication inaccuracies, compared to a conventional wavy-fin surface, 15% - 50% increase in heat transfer coefficient was possible for the same pressure drop value. In addition, if the fabrication inaccuracy can be eliminated, an even larger performance enhancement is predicted. Since metal based additive manufacturing is still in the developmental stage, it is anticipated that with further refinement of the manufacturing process in future designs, the fabrication accuracy can be improved. For the polymer heat exchanger, by fabricating a very thin wall heat exchanger (150μm), the wall thermal resistance, which usually becomes the limiting side for polymer heat exchanger, was calculated to account for only up to 3% of the total thermal resistance. A comparison of air-side heat transfer coefficient of the polymer heat exchanger with some of the commercially available plain plate fin surface heat exchangers show that polymer heat exchanger performance is equal or superior to plain plate fin surfaces. This shows the promising potential for polymer heat exchangers to compete with conventional metallic heat exchangers when an additive manufacturing-enabled fabrication is utilized. Major contributions of this study are as follows: (1) For the first time demonstrated the potential of additive manufacturing in metal printing of heat exchangers that benefit from a sophisticated design to yield a performance substantially above the respective conventional systems. Such heat exchangers cannot be fabricated with the conventional fabrication techniques. (2) For the first time demonstrated the potential of additive manufacturing to produce polymer heat exchangers that by design minimize the role of thermal conductivity and deliver a thermal performance equal or better that their respective metallic heat exchangers. In addition of other advantages of polymer over metal like antifouling, anticorrosion, and lightweight. Details of the work are documented in respective chapters of this thesis.

Proposta de uma matriz de decisão em energia hidrelétrica com o uso do método multicritério, para formulação de políticas públicas no estado do Paraná

Brazil is internationally acknowledged for its renewable sources, most notably, hydroelectric power plant projects which correspond to 65% of electricity production supply to the National Interconnected System. The main question behind this research is: what are the weights and the relative importance of the variables which have influence on the decision making process for the expansion of hydroelectric generation projects in Parana? The main objective is to propose a multi-criteria decision procedure, in association with water sources options that take into consideration the weight and relative importance of the alternatives having influence on the decision by enterprises in the generation of electricity in the state of Paraná. As far as the approach to the problem is concerned, this research can be classified as having mixed methodologies, applying Content Analysis, Delphi technique and the Analytic Hierarchy Process. Following Delphi methodology, a group of 21 was selected for data collection, all of those linked to Paranaense hydroelectricity market. And the main result was the construction of a decision tree in which it was possible to identify the importance and relative weight of the elements associated with the four dimensions of energy. In environmental dimension, the highest relative weight was placed on the loading capacity of Parana system; the economic dimension, the amortization of investment; in social dimension, the generation of direct work places and in institutional dimension, the availability of suitable sources of financing. Policy makers and business managers make their decisions based on specific criteria related to the organization segment, market information, economic and political behavior among other indicators that guide them in dealing with the typical tradeoffs of projects in hydropower area. The results obtained in the decision tree show that the economic bias is still the main factor in making investment decisions. However, environmental impacts on the State loading capacity, income generation, providing opportunities for direct as well as indirect jobs. And at an institutional level, the absence of funding sources show that the perception of experts is focused on other issues beyond the logic behind development per se. The order of priority of variables in this study indicates that in the current environment of uncertainty in the Brazilian economy as many variables must be analyzed and compared in order to optimize the scarce resources available to expand local development in relation to Paranaense water matrix.

Changes in the annual harmful algal blooms of Alexandrium minutum : effects of environmental conditions and drainage basin inputs in the Rance estuary (Brittany, France)

Time series of physico-chemical data and concentrations (cell L-1) of the toxic dinoflagellate Alexandrium minutum collected in the Rance macrotidal estuary (Brittany, France) were analyzed to understand the physico-chemical processes of the estuary and their relation to changes in bloom development from 1996 to 2009. The construction of the tidal power plant in the north and the presence of a lock in the south have greatly altered hydrodynamics, blocking the zone of maximum turbidity upstream, in the narrowest part of the estuary. Alexandrium minutum occurs in the middle part of the estuary. Most physical and chemical parameters of the Rance estuary are similar to those observed elsewhere in Brittany with water temperatures between 15–18 °C, slightly lowered salinities (31.8–33.1 PSU), low river flow rates upstream and significant solar radiation (8 h day-1). A notable exception is phosphate input from the drainage basin which seems to limit bloom development: in recent years, bloom decline can be significantly correlated with the decrease in phosphate input. On the other hand, the chemical processes occurring in the freshwater-saltwater interface do not seem to have an influence on these occurrences. The other hypotheses for bloom declines are discussed, including the prevalence of parasitism, but remain to be verified in further studies.

A implantação de hidrelétricas na Amazônia brasileira, impactos socioambientais e à saúde com as transformações no território : o caso da UHE de Belo Monte

Tese (doutorado)—Universidade de Brasília, Instituto de Ciências Humanas, Departamento de Geografia, Pós-Graduação em Geografia, 2016.

Termodinâmica e o uso eficiente de recursos : análise exergética de uma biorrefinaria de cana-de-açúcar

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Mecânica, 2015.

MULTI-UNIT ACCIDENT CONTRIBUTIONS TO U.S. NUCLEAR REGULATORY COMMISSION QUANTITATIVE HEALTH OBJECTIVES: A SAFETY GOAL POLICY ANALYSIS USING MODELS FROM STATE-OF-THE-ART REACTOR CONSEQUENCE ANALYSES

The U.S. Nuclear Regulatory Commission implemented a safety goal policy in response to the 1979 Three Mile Island accident. This policy addresses the question “How safe is safe enough?” by specifying quantitative health objectives (QHOs) for comparison with results from nuclear power plant (NPP) probabilistic risk analyses (PRAs) to determine whether proposed regulatory actions are justified based on potential safety benefit. Lessons learned from recent operating experience—including the 2011 Fukushima accident—indicate that accidents involving multiple units at a shared site can occur with non-negligible frequency. Yet risk contributions from such scenarios are excluded by policy from safety goal evaluations—even for the nearly 60% of U.S. NPP sites that include multiple units. This research develops and applies methods for estimating risk metrics for comparison with safety goal QHOs using models from state-of-the-art consequence analyses to evaluate the effect of including multi-unit accident risk contributions in safety goal evaluations.

Practical engineer.

Mode of access: Internet.

Prevalencia de síntomas musculoesqueléticos en personal que labora en una Central eléctrica en las actividades de Gestión y Control de Pérdidas de Energía en Norte de Santander, 2016

Introducción: Los trastornos musculoesqueléticos de origen laboral son la primera causa de baja en los trabajadores produciendo disminución de la capacidad productiva y reducción del salario y para las empresas suponen disfunciones de la actividad y pérdidas económicas. Objetivo: Identificar la prevalencia de síntomas musculoesqueléticos del personal tanto operativo como administrativo que laboran en la central eléctrica en Norte de Santander. Metodología: Estudio de corte transversal en una población de 184 trabajadores que laboran para la sección de gestión y control de pérdidas de energía en la Central eléctrica de Norte de Santander. Se utilizó como instrumento para la recolección de información el cuestionario Nórdico de Kuorinka en su versión en español, que permite realizar la detección y análisis de síntomas musculoesqueléticos de la población expuesta, el cual consta de dos partes, la primera que incluye datos socio demográficos tales como antecedentes personales y actividad laboral y la segunda que permite registrar síntomas músculo-esqueléticos en los segmentos corporales (cuello, hombros, codos, muñecas/manos, espalda superior, espalda inferior). El análisis descriptivo incluyó el cálculo de la media y los porcentajes y para estimar asociaciones se utilizó odds ratio (OR) Resultados: El 88% de los trabajadores eran hombres, con una media de edad de 36,1(±10,5) años. El 20,7% percibía molestias en el cuello y el 17,4 % en las muñecas. Tuvieron más riesgo de percibir molestias en la región del cuello las mujeres (OR 20,54), los trabajadores que pertenecen al sector administrativo (OR 15,9), los que no realizar actividad física (OR 2,33), los que tienen menos de 1 año en el cargo (OR 2,9) y los que tenían un Índice de masa corporal mayor de 25 (OR 1,31). Conclusiones: Ser mujer y trabajar en el sector administrativo influyen en la percepción de molestias y síntomas osteomusculares con mayor prevalencia en las zonas corporales de el cuello y las muñecas o manos. De acuerdo a lo encontrado en el estudio se sugiere la realización de actividades en salud laboral que prevengan el riesgo ergonómico.

Solastalgia y conductas pro-ambientales en un conflicto socioambiental por la construcción de una hidroeléctrica

Introducción: La construcción de megaproyectos hídricos implica una reconfiguración territorial donde se ven afectadas las fuentes de agua dulce, la biodiversidad terrestre y acuática, y los asentamientos humanos que colindan con dichas construcciones. Objetivo: estimar la asociación entre las conductas proambientales con la solastalgia entre las personas que se encuentran ejerciendo un proceso de resistencia social contra la Central Hidrosogamoso en el departamento de Santander, Colombia. Metodología: se utilizó un diseño de estudio transversal en el que se entrevistaron integrantes y no integrantes de grupos ambientalistas de las zonas de influencia del proyecto. Se realizó un análisis descriptivo de las variables sociodemográficas de los dos grupos de comparación presentando frecuencias absolutas y relativas y diferencias significativas por medio de la prueba ji cuadrado, exacta de Fisher y U de Mann Whitney. Se utilizó un modelo de regresión lineal múltiple en el que la variable dependiente fue el puntaje de solastalgia y las variables independientes fueron las escalas de las conductas proambientales: altruismo, austeridad, equidad, conducta ecológica, deliberación, indignación y aprecio por lo natural, además, se ajustó por algunas variables sociodemográficas de interés. Resultados: los grupos comparados presentaron diferencias importantes en cuanto a la zona de procedencia, condiciones económicas y organización social. El incremento de 5 puntos en la escala del sentimiento de indignación incrementó 0.98 la escala de solastalgia (IC95%: 0.19; 1.78). Las personas sin pareja estable tuvieron 3.02 puntos menos de solastalgia comparadas con personas casadas o en unión libre (IC95%: -4.96; -1.44), mientras que aquellas con alto nivel educativo obtuvieron 2.02 puntos menos que las personas con primaria y bachillerato (IC95%: -3.99; -0.06). Un modelo alterno mostró que no pertenecer a un grupo ambientalista disminuye en 2.29 puntos la solastalgia, comparado con pertenecer a un grupo (IC95%: -4.31; -0.28),. Conclusión: posiblemente las motivaciones por las cuales los actores involucrados se resisten a las transformaciones territoriales ocasionadas por la construcción de las represas son más un reflejo de la condición socioeconómica que de la preocupación de los actores por el daño del medio ambiente y además, esta resistencia es un fenómeno que se limita a aquellos que están afectados directamente en el área de influencia del proyecto

SISTEMAS DE INFORMACIÓN GEOGRÁFICA COMO HERRAMIENTA PARA EVALUAR LA APORTACIÓN ANTROPICA DE MERCURIO EN SUELOS

Este trabajo evalúa el contendido y la variabilidad espacial de mercurio en suelos agrícolas de Islas Baleares y Canarias utilizando técnicas integradas en los sistemas de información geográfica. El propósito de este estudio ha sido valorar el contenido y distribución del mercurio en el suelo y distinguir la contribución considerada como natural, y procedente del aporte de la roca de origen, de la inducida por actividades humanas, considerada como contaminante. El SIG se muestra comouna tecnología capaz de localizar fuentes de contaminación y proporcionar el alcance de éstos. Los mapas generados con la relación de Hg_suelo/Hg_roca han permitido cuantificar las entradas de este metal en el suelo y evaluar el enriquecimiento de mercurio en el mismo. Valores excesivamente elevados encontrados en un área de la Isla de Mallorca son atribuibles a las emisiones de una planta eléctrica de carbón cercana.PALABRAS CLAVE: Análisis espacial, SIG, geostadística, mercurio, contaminación de suelos.ABSTRACTThis study assesses Hg concentration and the spatial variability of mercury in agricultural soils of the Balearic and Canary Islands using integrated techniques of geographic information systems. The purpose of this study was to characterize in quantitative terms the mercury concentrations and to distinguish “natural” mercury contribution from that of human-induced contamination. GIS is shown to be technologically capable of locating sources of pollution and assessing their scope. The top soil/rock mercury content maps showed a high level of mercury in the same areas. Excessively high Hg values found in an area of the island of Mallorca are attributable to emissions from a coalfired power plant nearby.KEYWORDS: Spatial analysis, GIS, geostatistic, mercury, soil contamination

Aging assessment of polyethylene-based insulated low-voltage cables for nuclear applications

This thesis aims at investigating the evolution of physico-chemical and electrical properties relevant to low-voltage power cables for nuclear application when subjected to typical nuclear power plant (NPP) environments i.e., to gamma radiation and high temperature. This research is part of the European Project Horizon 2020 TeaM Cables, which aims at providing a novel methodology for efficient and reliable NPP cable aging management to NPP operators. The analyzed samples consist of both coaxial and twisted pair cables with different polymeric compounds used as primary insulation. Insulating materials are based on the same silane cross-linked polyethylene matrix with different additives and fillers. In order to characterize the material response to the environmental stresses, various experimental techniques have been used. These characterizations range from the microscale chemical response e.g. by FTIR, OIT and DSC, to the macroscale electrical and mechanical behavior. A significant part of this Thesis is given to the correlation of the response to aging among the different measured properties. It has been shown that it could be possible to connect both the chemical and mechanical properties of the investigated XLPE cables with the electrical ones. In particular, the high-frequency dielectric response allows an effective monitoring of both the early periods of aging, controlled by the antioxidant consumption kinetics, and then the subsequent oxidation of the polymer matrix. Therefore, dielectric spectroscopy showed to be capable of assessing the LV cable aging state and, it might be used as an aging marker for cable diagnostic. The last part of the manuscript focuses on the building of a predictive modelling approach of LV cable conditions subjected to radio-chemical aging. It resulted into obtaining a lifetime curve which relates the aging factor to which the cable is subjected to, namely the dose rate, with the limit value of the considered electrical property (tanδ).

Exact and heuristic algorithms for the integrated planning of multi-energy systems

The aim of this thesis is to present exact and heuristic algorithms for the integrated planning of multi-energy systems. The idea is to disaggregate the energy system, starting first with its core the Central Energy System, and then to proceed towards the Decentral part. Therefore, a mathematical model for the generation expansion operations to optimize the performance of a Central Energy System system is first proposed. To ensure that the proposed generation operations are compatible with the network, some extensions of the existing network are considered as well. All these decisions are evaluated both from an economic viewpoint and from an environmental perspective, as specific constraints related to greenhouse gases emissions are imposed in the formulation. Then, the thesis presents an optimization model for solar organic Rankine cycle in the context of transactive energy trading. In this study, the impact that this technology can have on the peer-to-peer trading application in renewable based community microgrids is inspected. Here the consumer becomes a prosumer and engages actively in virtual trading with other prosumers at the distribution system level. Moreover, there is an investigation of how different technological parameters of the solar Organic Rankine Cycle may affect the final solution. Finally, the thesis introduces a tactical optimization model for the maintenance operations’ scheduling phase of a Combined Heat and Power plant. Specifically, two types of cleaning operations are considered, i.e., online cleaning and offline cleaning. Furthermore, a piecewise linear representation of the electric efficiency variation curve is included. Given the challenge of solving the tactical management model, a heuristic algorithm is proposed. The heuristic works by solving the daily operational production scheduling problem, based on the final consumer’s demand and on the electricity prices. The aggregate information from the operational problem is used to derive maintenance decisions at a tactical level.

Formule analitiche per il calcolo delle perdite elettrodinamiche in cavi superconduttori ad alta temperatura critica.

Questo elaborato di tesi si concentra sul calcolo delle perdite che si verificano in cavi superconduttori ad alta temperatura critica per la fusione. La valutazione delle perdite riveste un ruolo di particolare importanza nella fase di progettazione di un cavo o di un avvolgimento superconduttore. Infatti, le proprietà superconduttive si manifestano a basse temperature (inferiori alla temperatura di transizione dalla fase normale alla fase superconduttiva) e di conseguenza è necessario configurare un apparato criogenico per il sistema. In tal senso, le perdite rientrano nel “budget” termico necessario a dimensionare correttamente il sistema di raffreddamento. Nel dettaglio, il lavoro verte sulla modellizzazione analitica e numerica delle perdite in una pila di nastri superconduttori in presenza sia di un campo magnetico esterno sia di una corrente di trasporto, entrambi con andamento variabile nel tempo. Gli obiettivi prefissati sono stati raggiunti grazie allo studio della letteratura e alle simulazioni numeriche, effettuate utilizzando dei software commerciali quali COMSOL Multiphysics e Matlab. Il contributo originale di questo elaborato è stato lo sviluppo di un nuovo modello analitico, che permette di calcolare le perdite per isteresi dovute a campi magnetici e correnti variabili periodicamente nel tempo. Le formule hanno carattere generale e possono essere utilizzate quando i campi e le correnti variano in fase seguendo degli andamenti periodici nel tempo di qualsiasi forma. Le simulazioni agli elementi finiti sono servite per validare le formule analitiche proposte. Le nuove relazioni ottenute sono state utilizzate per la stima delle perdite di un inserto ad alta temperatura critica del solenoide centrale di EU-DEMO (DEMOnstration Power Plant). Il modello analitico elaborato sarà pubblicato prossimamente su IEEE-Transactions on Applied Superconductivity.

Review of the potential for co-firing of cassava rhizome for generating heat and power in cassava based bio-ethanol plant in Thailand

Biomass is an important source of energy in Thailand and is currently the main renewable energy source, accounting for 40% of the renewable energy used. The Department of Alternative Energy and E�ciency (DEDE), Ministry of Thailand, has been promoting the use of renewable energy in Thailand for the past decade. The new target for renewable energy usage in the country is set at 25% of the �nal energy demand in 2021. Thailand is the world’s fourth largest producer of cassava and this results in the production of signi�cant amounts of cassava rhizome which is a waste product. Cassava rhizome has the potential to be co-�red with coal for the production of heat and power. With suitable co-�ring ratios, little modi�cation will be required in the co-�ring technology. This review article is concerned with an investigation of the feasibility of co-�ring cassava rhizome in a combined heat and power system for a cassava based bio-ethanol plant in Thailand. Enhanced use of cassava rhizome for heat and power production could potentially contribute to a reduction of greenhouse gas emissions and costs, and would help the country to meet the 2021 renewable energy target.