Rifampicin fails to eradicate mature biofilm formed by methicillin-resistant Staphylococcus aureus

INTRODUCTION: Antimicrobial activity on biofilms depends on their molecular size, positive charges, permeability coefficient, and bactericidal activity. Vancomycin is the primary choice for methicillin-resistant Staphylococcus aureus (MRSA) infection treatment; rifampicin has interesting antibiofilm properties, but its effectivity remains poorly defined. METHODS: Rifampicin activity alone and in combination with vancomycin against biofilm-forming MRSA was investigated, using a twofold serial broth microtiter method, biofilm challenge, and bacterial count recovery. RESULTS: Minimal inhibitory concentration (MIC) and minimal bactericidal concentration for vancomycin and rifampicin ranged from 0.5 to 1mg/l and 0.008 to 4mg/l, and from 1 to 4mg/l and 0.06 to 32mg/l, respectively. Mature biofilms were submitted to rifampicin and vancomycin exposure, and minimum biofilm eradication concentration ranged from 64 to 32,000 folds and from 32 to 512 folds higher than those for planktonic cells, respectively. Vancomycin (15mg/l) in combination with rifampicin at 6 dilutions higher each isolate MIC did not reach in vitro biofilm eradication but showed biofilm inhibitory capacity (1.43 and 0.56log10 CFU/ml reduction for weak and strong biofilm producers, respectively; p<0.05). CONCLUSIONS: In our setting, rifampicin alone failed to effectively kill biofilm-forming MRSA, demonstrating stronger inability to eradicate mature biofilm compared with vancomycin.

Produção de misturas betuminosas a quente com incorporação de material fresado

A incorporação de materiais reciclados na construção de estradas, como substituição de materiais virgens é percebida como uma oportunidade de economizar recursos, e evitar o impacto associado à sua extração e transporte. Desta forma, a incorporação de material fresado (do termo inglês RAP - Reclaimed Asphalt Pavement) em misturas betuminosas produzidas a quente em central tem sido uma alternativa satisfatória. Neste trabalho, foram estudadas três misturas betuminosas do tipo macadame betuminoso (AC 20 base 35/50), tradicional e com taxas de incorporação de RAP de 10% e 20%, com o objetivo de efetuar uma análise comparativa do seu comportamento. Começou-se por realizar um estudo Marshall de forma a determinar a percentagem ótima de betume a usar em cada mistura e, posteriormente, a composição foi transposta para central para o seu fabrico. No final foram realizados ensaios de caracterização mecânica sobre as misturas para avaliar o seu desempenho, através de ensaios de sensibilidade à água, módulo de rigidez, resistência à fadiga e à deformação permanente. Esta dissertação teve o apoio da empresa Tecnovia – Sociedade de Empreitadas S.A., com a disponibilização de instalações e materiais para o trabalho experimental. De acordo com os resultados obtidos, é possível concluir que as misturas recicladas apresentaram um comportamento satisfatório, quando comparado com as misturas tradicionais.

Geopolymers as infill material for conservation of azulejos

The restoration materials currently used to fill gaps in architectural historical azulejos (e.g. lime or organic resin pastes) usually show serious drawbacks in terms of compatibility, effectiveness and durability. The existing solutions do not fully protect azulejos in outdoor conditions and frequently result in further deterioration. Geopolymers can be a potential solution for azulejo lacunae infill given the chemical-mineralogical similitude to the ceramic body, and also the durability and versatile range of physical properties that can be obtained through the manipulation of their formulation and curing conditions. This work presents and discusses the viability of the use of geopolymeric pastes to fill lacunae in azulejos or to act as “cold” cast ceramic tile surrogates reproducing missing azulejo fragments. The formulation of geopolymers, namely the type of activators, the aluminosilicate source, the amount of water (to meet adequate workability requirements) and curing conditions were studied. The need for post-curing desalination was also considered envisaging their application in the restoration of outdoor architectural historical azulejos frequently exposed to adverse environmental conditions. The possible advantages and disadvantages of the use of geopolymers in the conservation of azulejos are also discussed. Several techniques were used to study the chemical and physical behavior of geopolymers, namely FT-IR, XRD, MIP, SEM-EDS, WDXRF, electrical conductivity, open porosity, bending strength, adhesion strength, water vapour permeability, thermal expansion and hydric expansion. The results indicate that geopolymers are a promising material for restoration of azulejos, exhibiting some properties, such as adhesion to the ceramic substrate, higher than inorganic materials used nowadays, such as aerial lime based pastes.

Development and modulation of magnetic responsive supported ionic liquid membranes

The work presented in this thesis aims at developing a new separation process based on the application of supported magnetic ionic liquid membranes, SMILMs, using magnetic ionic liquids, MILs. MILs have attracted growing interest due to their ability to change their physicochemical characteristics when exposed to variable magnetic field conditions. The magnetic responsive behavior of MILs is thus expected to contribute for the development of more efficient separation processes, such as supported liquid membranes, where MILs may be used as a selective carrier. Driven by the MILs behavior, these membranes are expected to switch reversibly their permeability and selectivity by in situ and non-invasive adjustment of the conditions (e.g. intensity, direction vector and uniformity) of an external applied magnetic field. The development of these magnetic responsive membrane processes were anticipated by studies, performed along the first stage of this PhD work, aiming at getting a deep knowledge on the influence of magnetic field on MILs properties. The influence of the magnetic field on the molecular dynamics and structural rearrangement of MILs ionic network was assessed through a 1H-NMR technique. Through the 1H-NMR relaxometry analysis it was possible to estimate the self-diffusion profiles of two different model MILs, [Aliquat][FeCl4] and [P66614][FeCl4]. A comparative analysis was established between the behavior of magnetic and non-magnetic ionic liquids, MILs and ILs, to facilitate the perception of the magnetic field impact on MILs properties. In contrast to ILs, MILs show a specific relaxation mechanism, characterized by the magnetic dependence of their self-diffusion coefficients. MILs self-diffusion coefficients increased in the presence of magnetic field whereas ILs self-diffusion was not affected. In order to understand the reasons underlying the magnetic dependence of MILs self-diffusion, studies were performed to investigate the influence of the magnetic field on MILs’ viscosity. It was observed that the MIL´s viscosity decreases with the increase of the magnetic field, explaining the increase of MILs self-diffusion according to the modified Stokes- Einstein equation. Different gas and liquid transport studies were therefore performed aiming to determine the influence of the magnetic behavior of MILs on solute transport through SMILMs. Gas permeation studies were performed using pure CO2 andN2 gas streams and air, using a series of phosphonium cation based MILs, containing different paramagnetic anions. Transport studies were conducted in the presence and absence of magnetic field at a maximum intensity of 1.5T. The results revealed that gas permeability increased in the presence of the magnetic field, however, without affecting the membrane selectivity. The increase of gas permeability through SMILMs was related to the decrease of the MILs viscosity under magnetic field conditions.(...)

Terra nativa : a relação eco-humana na vida e na obra de Ferreira de Castro

A presente investigação visou contribuir para o estudo da permeabilidade entre Ciência e Arte, explorando, nomeadamente, o diálogo frutífero entre a área científica interdisciplinar da Ecologia Humana e a Literatura Portuguesa. Neste sentido, configura o que pode entender-se como um ensaio de dupla interdisciplinaridade. Recorreu-se a uma metodologia híbrida que integra métodos e fontes das ciências do ambiente e sociais e da análise literária, cujos graus de objetividade variam entre si, e que pode filiar-se na recente área dos “mixed methods”, cuja exploração se acentuou nas últimas duas décadas na Europa e nos Estados Unidos. Em concreto, pretendeu-se analisar a representação literária da Natureza e do vínculo de interdependência que o ser humano estabelece com ela na obra de Ferreira de Castro (1898-1974) ‒ um dos mais aclamados e traduzidos escritores portugueses do século XX, fundador do “romance social” português ‒ e perceber em que medida essa representação irradia da experiência de vida em variados ambientes geográficos, da personalidade e da ideologia do escritor. A tese consta de duas partes principais, traçando a primeira uma “Ecobiografia” do escritor, que averigua a sua relação e a sua conceção pessoal sobre a Natureza; e dedicando-se a segunda à ecocrítica de quatro textos de ficção com cenários em áreas rurais de Portugal continental, escritos entre 1928 e 1947: Emigrantes (1928), “O Natal em Ossela” (1933), Terra Fria (1934) e A Lã e a Neve (1947). Defende-se que, num tempo anterior ao movimento ecológico português, esses textos continham já um significativo teor eco-humano. Apresentam, por isso, um grande potencial de difusão do ambiente biofísico e das modalidades relacionais que o ser humano instituiu com a terra numa época, revelando-se um valioso contributo para a História Ambiental do território português. Esta função extra-artística projeta-se nas gerações leitoras do presente e do futuro e pode atuar em benefício da consciência ambiental e de cidadania neste século XXI. Razão por que é devido à obra castriana este novo lugar na Cultura portuguesa, mais além e mais amplo que a sua aplaudida dimensão literária.

Terra Nativa. A relação eco-humana na vida e na obra de Ferreira de Castro

A presente investigação teve o apoio financeiro da FCT, através de uma Bolsa de Doutoramento.

Impactos territoriais de processos de cooperação transfronteiriça : caso de estudo : Elvas e Badajoz

A cooperação transfronteiriça é vista na União Europeia como um modelo de integração territorial e como uma alternativa para o desenvolvimento das regiões de fronteira, devido ao seu afastamento em relação aos grandes centros urbanos. No início da década de 90 foi lançado o programa do INTERREG tendo em vista a maior permeabilidade da fronteira e o desenvolvimento destes territórios, entre os quais o das regiões do Alto Alentejo e da Extremadura. A grande proximidade territorial entre Elvas e Badajoz permitiu desde sempre relações de cooperação mais ou menos intensas e consentidas, mesmo antes da abertura da fronteira, motivadas sobretudo pela diferença de valor entre as duas moedas. Contudo, com a entrada conjunta dos países ibéricos na CEE (1986), essas relações intensificaram-se ao nível do comércio, do emprego, do turismo, do lazer e da procura de serviços. Impactos territoriais como a procura e utilização conjunta de infraestruturas e de espaços públicos pelas populações das duas cidades, a promoção e realização de espetáculos culturais, a prática de cross-border shopping, a procura de uma segunda residência, em ambos os lados da fronteira, e a tendência para uma urbanização contínua no futuro, justificaram a criação da Eurocidade Elvas-Badajoz (2013). Esta iniciativa tem como principais objetivos promover a conceção, gestão e prestação conjunta de serviços, desenvolver projetos de cooperação em áreas de interesse comum, estimular a cooperação entre empresas e atrair investimentos geradores de novos postos de trabalho. No entanto os desafios para ambas as cidades prendem-se com a existência de um quadro jurídico e legal distinto que tem condicionado algumas das ações ou iniciativas e o desenvolvimento territorial conjunto ainda carece de uma proposta estratégica.

Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems

This paper assesses the feasibility of impregnation/encasement of phase change materials (PCMs) in lightweight aggregates (LWAs). An impregnation process was adopted to carry out the encasement study of two different PCMs in four different LWAs. The leakage of the impregnated/encased PCMs was studied when they were submitted to freeze/thawing and oven drying tests, separately. The results confirmed that, the impregnation/encasement method is effective with respect to the large thermal energy storage density, and can be suitable for applications were PCMs cannot be incorporated directly such as asphalt road pavements.

Ancient materials and techniques to improve the earthen building durability

A substantial part of the world building heritage has been performed by earthen building. The durability of this existing heritage and mainly of the new buildings built with earth is particularly conditioned by the erosion caused by water action, especially in countries with high levels of rainfall. This research aims to contribute to the increase of knowledge about the ancient building techniques that provide enhanced durability. It is possible to analyse the ancestral practices used to protect the earth material from the water action in order to understand how the old earthen buildings were preserved over the centuries, resisting to harsh weather conditions. Among these techniques are: the incorporation of biopolymers (such as oils or fats from animal or vegetable origin); the addition of some minerals; and the earth stabilization with lime. However, this knowledge seems to be forgotten, probably due to the prejudice related to earthen constructions, which several times are associated with a poor building. This research also focuses on the study of new methods of earth stabilization with lime and biopolymers, adapting the ancient knowledge to improve the durability related to the water action. Therefore, alternative solutions can be obtained to improve the performance of earthen buildings, mainly the resistance of the material in the presence of water, reducing its permeability to water. In addition, with the proposed solutions it is possible to obtain good levels of water vapour permeability, one of the major advantages of the construction with earth.

Carbonation front progress in mortars containing fly ash considering the presence of chloride ions

The incorporation of fly ash (FA) in cementitious matrices have been frequently used in order to make the matrix more resistant to the action of chlorides. On the other hand, it is known that Ca (OH)2 existing in the matrix is partially consumed by the pozzolanic reactions, which facilitates the advancement of carbonation. Given that the combined action between carbonation and chloride penetration is a fact little known, we speculate about the behaviour of the matrix in this context. This study investigates the influence of the presence of chlorides on the carbonation in mortars with FA. Samples with 0% and 40% replacement of cement CEM I 42.5 R for FA were molded with water/binder 0.56 and 0.52 respectively. After 90 days of curing the specimens were subjected to cycles of immersion/drying for 56 days. Half of the samples was subjected to the following cycle: two days in a solution containing NaCl (concentration equal to 3.5 %); 12 days in the carbonation chamber (4% of CO2). The other half was: two days in water; 12 days in the carbonation chamber. Then, the development of carbonation was evaluated. The results indicate that the presence of chlorides influences the carbonation. The specimens submitted to the exclusive action of CO2 showed a greater depth of carbonation compared to that presented by the specimens subjected to combined action. This may be related to changes in properties of the matrix which may lead to further refinement of the pores and related to the presence of the salt that can lead to partial filling of the pores and the increase in moisture content.

The systematic and biogeographical status of Fredius reflexifrons (Ortmann, 1897) and Fredius fittkaui (Bott, 1967) (Crustacea: Brachyura: Pseudothelphusidae) from the Amazon and Atlantic Guianas River basins

There is considerable confusion in the literature regarding the systematic position and distribution of two pseudothelphusid crabs originally described as Potamocarcinus reflexifrons Ortmann, 1897 and Potamocarcinus reflexifrons fittkaui Bott, 1967, and now included in the genus Fredius Pretzman, 1965, as F. reflexifrons and F. fittkaui. Study of numerous specimens from recent collections, together with a critical analysis of the data published in the literature, shows that both taxa could be easily separated by gonopodal characters. The two species occupy discrete areas of distribution along the main axis of the Amazon River and in the upper Rio Negro Basin, respectively, with an overlap in the Atlantic Guianas. It is postulated that they originated from a common ancestor, through a process of vicariance, in the two areas observed at present. Permeability of barriers allowed their further occupancy of the Atlantic Guianas after the marine regressions in this area.

Thermo-compression molding of chitosan with a deep eutectic mixture for biofilms development

Supplementary information available at: http://www.rsc.org/suppdata/c5/gc/c5gc02231b/c5gc02231b1.pdf

Effect of incorporating different waste materials in bitumen

The increasing environmental concern about waste materials and the necessity of improving the performance of asphalt mixtures prompted the study of incorporating different waste materials in conventional bitumen. The reuse of waste materials can present benefits at an environmental and economic level, and some wastes can be used to improve the pavement performance. Thus, the purpose of this study is to evaluate the incorporation of different waste materials in bitumen, namely waste motor oil and different polymers. In order to accomplish this goal, 10% of waste motor oil and 5% of polymers (high density polyethylene, crumb rubber and styrene-butadiene-styrene) were added to a conventional bitumen and the resulting modified bitumens were characterized through basic and rheological tests. From this work, it can be concluded that the incorporation of different waste materials improve some important properties of the conventional bitumen. Such improvements might indicate a good behaviour at medium/high temperatures and an increase of fatigue and rutting resistance. Therefore, these modified bitumens with waste materials can contribute to a sustainable development of road paving industry due to their performance and environmental advantages.

Bacterial cellulose as a novel substrate for retinal pigment epithelium cells transplantation in age-related macular degeneration

Tese de Doutoramento em Engenharia Química e Biológica.

Development of polymer wicks for the fabrication of bio-medical sensors

Polymer based wicking structures were fabricated by sintering powders of polycarbonate (PC), ultra-high molecular weight polyethylene and polyamide 12, aiming at selecting a suitable material for an innovative electroencephalography (EEG) bio-electrode. Preliminary experiments showed that PC based wicks displayed the best mechanical properties, therefore more detailed studies were carried out with PC to evaluate the influence of powder granulometry and processing parameters (pressure, temperature and time) on the mechanical properties, porosity, mean pore radius and permeability of the wicks. It was concluded that the mechanical properties are significantly enhanced by increasing the processing time and pressure, although at the expense of a significant decrease of porosity and mean pore diameter (and thus permeability), particularly for the highest applied pressures (74kPa). However, a good compromise between porosity/permeability and mechanical properties could be obtained by sintering PC powders of particle sizes below 500μm at 165°C for 5min, upon an applied pressure of 56kPa. Moreover, PC proved to be chemically stable in contact with an EEG common used disinfectant. Thus, wicking structures with appropriate properties for the fabrication of reusable bio-electrodes could be fabricated from the sintering of PC powders.