High-performance 1.55 mu m low-temperature-grown GaAs resonant-cavity-enhanced photodetector

A 1.55 mu m low-temperature-grown GaAs (LT-GaAs) photodetector with a resonant-cavityenhanced structure was designed and fabricated. A LT-GaAs layer grown at 200 degrees C was used as the absorption layer. Twenty- and fifteen-pair GaAs/AlAs-distributed Bragg reflectors were grown as the bottom and top mirrors. A responsivity of 7.1 mA/W with a full width at half maximum of 4 nm was obtained at 1.61 mu m. The dark current densities are 1.28x10(-7) A/cm(2) at the bias of 0 V and 3.5x10(-5) A/cm(2) at the reverse bias of 4.0 V. The transient response measurement showed that the photocarrier lifetime in LT-GaAs is 220 fs. (c) 2006 American Institute of Physics.

钼体系催化合成1,2－聚丁二烯的研究

本工作通过较系统地研究Ziegler-Natta型钼催化体系对丁二烯聚合的催化作用，发现一类活性很高的钼催化剂。此类催化剂以无毒，资源丰富的加氢汽油为溶剂，活性已接近工业化的Ni、Co、Ti等体系。同时，本工作又找到了大幅度调节聚合物分子量和链结构的方法，发现了具有活性聚合特点的钼催化体系，初步考察了钼体系催化丁二烯聚合的动力学行为；并利用红外光谱，~(13)C-NRM、X-射线衍射和热分析等方法研究了所得聚合物的链结构和聚集态结构，对聚合物的基本性能也进行了初步考察，发现所得聚合物的一些基本性能超过天然橡胶。此类高活性钼催化剂由MoCl_4OR和(i-Bu)_2AlOAr组成，R为C_(8-18)烷基，Ar为芳基。本催化体系在70 ℃下催化丁二烯聚合时，催化剂用量为Mo/J摩尔比等于4 * 10~(-5)时，转化率可达78％。本体系聚合物分子量可用烯丙基卤等调节，其中烯丙基碘的效果最好。在Mo/J = 8 * 10~(-5)时，烯丙基碘/Mo摩尔比为0.1时即可使聚合物分子量下降约50万；烯丙基碘/Mo摩尔比为10时，聚合物重均分子量即小于20万（不加烯丙基碘为270万）。本体系聚合物分子量分布很窄，聚合温度为30 - 70 ℃时，_W/_n为1.5-2.0；_W/_n与聚合温度呈直线关系，利用外推法估计和动力学考察，本体系在－18 ℃左右有可能引发活性聚合。本体系聚丁二烯含有85％以上1,2－链节，其1，2-链节含量也可以用某些极性添加剂来调节。利用烯丙基碘做调节剂，可制得1,2－链节含量高达98％的聚丁二烯。烯丙基碘还可以调节聚合物链节的立体构型和序列分布；随着烯丙基碘用量的增加，间同1,2－链节增多，全同和无规1,2－链节减少，序列分布的有规性增加，链结构趋于规整。根据动力学初步研究结果，本体系催化丁二烯聚合的速度对单体浓度呈一级关系，表现活化能为17.07千卡／摩卡，催化剂利用率为4％，链增长速度常数为: k_(p30℃) = 40 (升／摩尔·分，下同), k_(p40℃) = 97, k_(p50℃) = 267, k_(p60℃) = 508, k_(p70℃) = 12077。本体系聚合物在烯丙基碘/Mo摩尔比小于2时，无论静态或拉伸下均为无定型；烯丙基碘/Mo摩尔比大于2而小于8时，静态下为无定型，而拉伸时产生结晶，与天然橡胶类似；烯丙基碘／Mo摩尔比大于8时，静态下亦有一定程度的结果。

全同1，2－聚丁二烯的合成及用~(13)C-NMR方法研究1，2－聚丁二烯的序列结构

采用Cr／Al催化体系，成功地合成了全同1，2－聚丁二烯（PBD），并用DSC方法、X－射线衍射、红外光谱及~(13)C－NMR的方法进行结构与物性测定，得如下结果：全同1，2－PBD的熔点为124.3℃；三角晶系中，分子链成了螺旋，晶胞参数为a＝17.3A，c＝ 6.5A；在红外光谱中，其特征谱带出现在694.4 cm~(-1)处；在~(13)C－NMR谱中仅出现四条谱峰，其化学位移分别为142.51、111.56、39.26、37.43 ppm。全同1，2－PBD的~(13)C－NMR谱提供的实验数据表明，在~(13)C－NMR谱中1，2－PBD－CH二碳十个五元组谱峰的归属是有别于Elgert、Kumar已有的归属。它属于一种新的归属，与半经验方法所推演的结果相符。它恰巧同聚丙烯侧甲基五元组谱峰的归属一致。采用半经验方法研究了1，2－PBD的~(13)C－NMR增中CH二碳五元组、CH_2－碳四元组及六元组共振谱峰，同时讨论了模型链的链长、温度以及立构序列的排列对各立构序列键概率的影响，求得了相应的r值。同时采用经验方法对1，2－PBD的~(13)C－NMR谱中CH_2=碳、CH－碳五元组及CH_2－碳四元组谱峰做了归属。两种方法对CH_2－碳谱峰的归属得到了一致的结果。

具有环氧化酶-2选择性抑制活性的多取代蒽醌的合成

1-甲基-2-甲氧羰基-3, 6, 8-三羟基-7-甲氧基蒽醌是从唐菖蒲干球茎中分离到的具有环氧化酶-2选择性抑制活性的多取代蒽醌类化合物。本文试图合成该化合物，实现了其类似物的合成，同时发现了几个未见报道的反应。 1．通过Diels-Alder 反应合成了关键中间体——3-甲基-5-羟基-1, 2, 4-苯三甲酸三甲酯，1-COOMe选择性水解产物与1, 2, 3-三甲氧基苯进行分子间Friedel-Crafts反应的产物再进行分子内Friedel-Crafts反应得到了目标产物的类似物1-甲基-2-甲氧羰基-3-羟基-6，7，8-三甲氧基蒽醌（路线1）。目标产物及其它类似物的合成正在进行中。 2．以乙酰乙酸甲酯和巴豆醛为原料，经过Michael加成、分子内的Aldol反应、芳香化、选择性甲酰化和还原反应，得到关键中间体2-甲基-3-羟甲基-6-甲氧基苯甲酸甲酯及其衍生物。通过该化合物与3，4，5-三甲氧基苯甲酸甲酯进行Friedel-Crafts烷基化反应得到了多取代的二苯基甲烷衍生物，拟进一步关环合成目标化合物（路线2）。 3．发现邻甲氧基苯甲酸甲酯中酯甲基可以被正丁基锂和仲丁基锂中烷基交换生成相应的酯，反应的机理不明确。当使用叔丁基锂时，得到的是邻甲氧基苯基叔丁酮，这个方法可以用来合成芳基叔丁酮类化合物。 4．以2-苄氧基-6-甲基苯甲酸甲酯为原料进行氯甲基化反应时，以苯和二氯乙烷作溶剂，发生了苄基的迁移和芳环的偶联，分别得到2，2'-二甲基-3，3'-二甲氧羰基-4，4'-二羟基联苯和2，2'-二甲基-3，3'-二甲氧羰基-4，4'-二羟基-5，5'-二苄基联苯。这是对称联苯合成的新方法。 5．水杨酸羟基邻对位的选择性甲酰化可以分别通过水杨酸和水杨酸甲酯用HMTA/CF3COOH来实现。 6．Lewis酸催化3，4，5-三甲氧基苄醇环化成1, 2, 3, 6, 7, 8, 11, 12, 13-nonamethoxyl-10,15-dihydro-5H-trbibenzo [a, d, g] cyclononene (NDTC)，产率(54%)高于已有方法（12%）。 Methyl 3,6,8-trihydroxy-7-methoxy-1-methylanthraquinone-2-carboxylate is a new COX-2 selective inhibitor isolated from Gladiolus gandavensis. Two strategies were investigated to synthesis this compound, in which some important reactions were discovered. 1. The key intermediate 5-hydroxy-3-methylbenzene-1,2,4-tricarboxylic acid 2,4-dimethyl ester was prepared via Diels-Alder reaction followed by selective hydrolysis of 1-COOMe. This compound was coupled with 1,2,3-trimethoxybenzene and the product undergo intramolecular Friedel-Crafts reaction to give methyl 3-hydroxy-5,6,7-trimethoxy-1-methylanthraquinone-2-carboxylate (1st route). The target compound and other analogues are being prepared with the same procedure. 2. The key intermediates methyl 3-hydroxymethyl-6-methoxy-2-methylbenzoate and its derivatives were prepared starting from crotonaldehyde and methyl acetoacetate via Michael addition, intramolecular aldol reaction, aromatization, formylation and reduction. The intermediates were coupled respectively with derivatives of gallic acid to give polysubstituted diphenylmethane. However, attempts to cyclize these compounds to the target compounds and analogues were not successful (2nd route). 3. In the process for ortho-lithiation of methyl 2-methoxybenzoate, the substrate converted respectively to n-butyl 2-methoxybenzoate and sec-butyl 2-methoxybenzoate when n-BuLi and sec-BuLi were used. However, tert-BuLi reacted with methyl 2-methoxybenzoate afford 2-methoxyphenyl tert-butyl ketone, which could be used to synthesize aryl tert-butyl ketones. 4. The transformtion of methyl 2-benzoxy-6-methylbenzoate to dimethyl 4,4'-dihydroxy-2,2'-dimethylbiphenyl-3,3'-dicarboxylate in benzene, and dimethyl 5,5'-dibenzyl-4,4'-dihydroxy-2,2'-dimethylbiphenyl-3,3'-dicarboxylate in 1,2-dichloroethane in the presence of ZnCl2 provides a new method for the synthesis of symmetric biphenyl. 5. The formylation of salicylic acid at C-5 and methyl 2-hydroxybenzoate at C-3 could be regioselectively realized by using HMTA/CF3COOH. 6. Racemic 1, 2, 3, 6, 7, 8, 11, 12, 13-nonamethoxyl-10, 15-dihydro-5H-trbibenzo [a, d, g] cyclononene was prepared via Lewis acids catalyzed trimerization of 3, 4, 5-trimethoxylbenzyl alcohol with yield (54%) higher than the reported procesure (12%).

~(179)Au的1/2[660](πi_(13/2))转动带

利用能量为 16 4— 180MeV的 3 5Cl束流 ,通过重离子核反应 14 9Sm(3 5Cl ,5n)研究了 179Au的高自旋态能级结构 .实验进行了γ射线的激发函数、X γ和γ γ t符合测量 .基于对实验测量结果的分析 ,首次建立了 179Au的 1 2 [6 6 0 ](πi13 2 )转动带 .结合已有的实验数据 ,着重讨论了奇AAu核中1 2 [6 6 0 ](πi13 2 )转动带的带头激发能随中子数的变化

Efficient and divergent synthesis of cyclophosphamide analogues from 2-arylamino-3-acetyl-5, 6-dihydro-4H-pyrans

A facile and efficient one-pot synthesis of substituted cyclophosphamidic chlorides and their analogues has been developed from readily available enaminones, 2-arylamino-3-acetyl-5,6-dihydro4H-pyrans.

Hole-transporting polymers containing carbazol-3,9-diyl and 1,4-phenylene fragments in the main chain

New carbazole-based polymers, which contain various content of electro-active fragments in the main chain connected via alkylene spacers, have been synthesized by Ni(0)-catalyzed Yamamoto-type aryl-aryl coupling reactions. These compounds represent amorphous materials of high thermal stability with glass-transition temperatures of 139-151 degrees C and thermal decomposition starting at temperatures above 400 degrees C. UV-vis absorption and photoluminescence emission spectra of the materials confirmed that the conjugated segments in the macromolecules are rather short.

Microstructure and mechanical properties of Mg-12.3Zn-5.8Y-1.4Al alloy

Microstructure and mechanical properties of as-cast and heat-treated Mg-12.3Zn-5.8Y-1.4Al (ZYA1261) alloy were investigated. The phase compositions of the as-cast alloy are alpha-Mg, Mg3YZn6 (I-phase), Mg(3)y(2)Zn(3) (W-phase), Mg12YZn (Z-phase), Mg24Y5, MgZn and a small quantity of Al-containing phase.

Microstructures and mechanical properties of as-cast Mg–5Al–0.4Mn–xNd (x=0, 1, 2 and 4) alloys

Mg-5Al-0.4Mn-xNd (x=0, 1, 2 and 4wt.%) alloys were prepared by metal mould casting method. The microstructures and mechanical properties were investigated. The results demonstrated that Al11Nd3 phase was formed and mainly aggregated along the grain boundaries with the addition of Nd. Meanwhile, the grain sizes were greatly reduced with the increasing Nd content.

Synthesis of Liquid Polybutadiene Having Desired 1,2-Vinyl Content with Co(naph)(2)-Al-2(C2H5)(3)Cl-3-P(OPh)(3) Catalyst System

Liquid polybutadiene with desirable 1,2-units content was synthesized by Co(naph)(2)-Al-2(C2H5)(3)Cl-3-P(OPh)(3) catalyst system. It was shown that liquid polybutadiene having adequate 1,2-unit content (vinvl =35%-40%) molecular weight(M-n = 700-3500), and acceptabele conversion(>= 55%) can synthesized after optimizing polymerization conditions.

间同1,2-聚丁二烯的结构和结晶动力学研究

间同1,2-聚丁二烯(s-PB)由丁二烯用Fe(2-EHA)3/Al(i-Bu)3/DEP作催化剂,在己烷溶剂中50℃下聚合制备.用13C NMR谱方法测定的1,2-结构含量为89.3%,间同结构为86.5%;X射线测得聚合物的结晶度约为68%.非等温结晶动力学研究采用DSC方法,改进的Avrami方程可以很好地分析s-PB非等温结晶过程的主期结晶,表明其结晶过程是自成核,三维球形生长.Ozawa方程不适合分析s-PB非等温结晶动力学;Avrami和Ozawa方程结合的方法可以很好地描述s-PB非等温结晶过程,指数a为1.138,F(θ)随着结晶度的提高而增大;并计算了s-PB的结晶活化能.

Microstructures and mechanical properties of Mg-8Gd-0.6Zr-xNd (x=0, 1, 2 and 3 mass%) alloys

Mg-8Gd-0.6Zr-xNd (x = 0, 1, 2 and 3 mass%) alloys were prepared by metal mould casting method, and the microstructures, age hardening responses and mechanical properties have been investigated. The microhardness of the as-cast alloys is increased with increasing Nd content. The age hardening behavior and mechanical properties are enhanced significantly by adding Nd element. The peak ageing hardness of the Mg-8Gd-0.6Zr-3Nd alloy is 103, it is about 1.3 times more than that of the Mg-8Gd-0.6Zr alloy. The aged Mg-8Gd-0.6Zr-3Nd alloy exhibits maximum ultimate tensile strength and yield strength, and the values are 271 and 205 MPa at room temperature, 205 MPa and 150 MPa at 250 degrees C, respectively. Which are about 2 times higher than those of Mg-8Gd-0.6Zr alloy. The improved hardness and strength are mainly attributed to the fine dispersiveness Of Mg5RE and Mg12RE precipitates in the alloy.

Vilsmeier-Haack reactions of 2-arylamino-3-acetyl-5,6-dihydro-4H-pyrans toward the synthesis of highly substituted pyridin-2(1H)-ones

A facile and efficient one-pot synthesis of highly substituted pyridin-2(IH)-ones was developed via Vilsmeier-Haack reactions of readily available enaminones, 2-arylamino-3-acetyl-5,6-dihydro-4H-pyrans, and a mechanism involving sequential ring-opening, haloformylation, and intramolecular nucleophilic cyclization reactions is proposed.

Synthesis and applications of 3-[6-(hydroxymethyl)pyridin-2-yl]-1,1 '-bi-2-naphthols or 3,3 '-bis[6-(hydroxymethyl)pyridin-2-yl]-1,1 '-bi-2-naphthols

A series of new 1,1'-bi-2-naphthol (BINOL) derived ligands, 3-[6-(hydroxymethyl)pyridin-2-yl]-BINOLs or 3,3'-bis[6(hydroxymethyl)pyridin-2-yl]-BINOLs, bearing one or two chiral pyridinylmetlianols attached to a binaphthyl skeleton, have been synthesized using the Suzuki cross-coupling reaction. The resulting compounds have been used as ligands in the enantioselective addition of diethylzinc to aldehydes; the products were obtained with up to 96% ee.