Ensuring sessional academic success by rethinking the place of academic development

There has been growing recognition of the contribution that Sessional Academics make to student learning in higher education; with recent studies concluding that around half Australian university teaching is now performed by casual staff [Red Report 2008; May, 2013]. However, sector-wide research and institutional audits continue to raise concerns about academic development and quality assurance, as well as the recognition and retention of Sessional Academics. In response, universities offer academic development programs. However, while such centrally offered programs are undoubtedly useful, they are necessarily generic and cannot address the local contexts of faculties or provide ‘on the ground’ support. This paper presents a new, distributed model of academic support and development for Sessional academics at Queensland University of Technology. Entitled the Sessional Academic Success program, it employs the principles of distributed leadership. Experienced Sessional academics are trained and supported to assume roles as Sessional Academic Success Advisors within their schools. Complementing our central programs, they design bespoke, locally situated, peer-to-peer academic development for new Sessional teachers; provide ‘just in time’, safe and reliable advice; and build supportive communities of teaching practice in their local contexts. This distributed model re-envisages the forms and places of academic development and support. It helps ensure that new Sessional Academics are embraced by faculty life. And, recognizing that experienced Sessional Academics have much to contribute to the advancement of learning and teaching, it builds their capacity through leadership opportunities. As the designer/facilitator of the program and a Sessional Academic Success Advisor, the authors take a dialogic approach and together describe the design, implementation and outcomes of the program.

The Sessional Academic Success (SAS) project

The Sessional Academic Success (SAS) project is a sustainable, distributed model for supporting sessional staff at QUT. Developed by the Learning and Teaching Unit. SAS complements our Sessional Academic Program (SAP): a sequence of formal academic development workshops explained in complementary nomination. SAS recognises that while these programs are very well received and a crucial aspect of preparing and advancing sessional teachers, they are necessarily encapsulated in the moment of their delivery and are generic, as they address all faculties (with their varied cultures, processes and pedagogies). The SAS project extends this formal, centrally offered activity into local, ‘just in time’, ongoing support within schools. It takes a distributed leadership approach. Experienced sessional academics are recruited and employed as Sessional Academic Success Advisors (SASAs). They provide sessional staff in their schools with contextually specific, needs based, peer-to-peer development opportunities; one-on-one advice on classroom management and strategies for success; and help to trouble-shoot challenges. The SASAs are trained by the Learning and Teaching Unit co-ordinator, and ongoing support is provided centrally and by school-based co-ordinators. This team approach situates the SASAs at the centre of an organisation map (see diagram of support relationships below). The SAS project aims to support sessional staff in their professional development by: • Offering contextual, needs-based support at school level by harnessing local expertise; • Providing further development opportunities that are local and focal; SAS aims to retain Sessional Staff by: • Responding to self-nominated requests for support and ‘just in time’, safe and reliable advice in times of need; • Building sessional staff confidence through help with dealing with challenges from a trusted peer; • Building a supportive academic community for sessional staff, which helps them feel a part of faculty life, and a community of teaching practice. SAS aims to support sessional staff in the development of academic teaching careers by: • Recognising the capacity of experienced sessional staff to support their peers in ways that are unique, valuable and valued and providing the agency to do so; • Providing career advancement and leadership opportunities for sessional staff. SAS takes unique approaches within each school using strategies such as: • Welcomes and schools orientation by SASAs; • Regular check ins; face-to-face advice and online support; • Compiling local resources to complement university wide resources. • Sessional-to-sessional ‘just in time’ training (eg. assessment and marking when marking commences); • Peer feedback and mentoring (the opportunities to sit in more experiences sessionals’ classes; • Sessional staff awards (nominated by students); • Communities of practice to discuss topics and issues with a view to (and support for) publishing on learning and teaching. In these ways, SASAs complement support offered by unit coordinators, administrators, and the Learning and Teaching Unit. Pairing senior and ‘understudy’ advisors ensures a line of succession, sustainability and continuity. A pilot program commenced in 2012 involving three schools (Psychology and Social Work; Electrical Engineering and Computer Science; Media, Entertainment and Creative Arts). It will be expanded across schools in 2013.

Development of the child abuse and neglect reporting self-efficacy questionnaire for nurses

Taiwan nurses are mandated to report known or suspected child abuse and neglect (CAN), and self-efficacy is known to have an important influence on professional behaviors. The aim of this study was to develop and test the CAN reporting self-efficacy (CANRSE) scale as a measure of nurses’ self-efficacy to report CAN. A sample of 496 nurses from Southern Taiwanese hospitals used the CANRSE scale. The psychometric evaluation of the scale included content validity, exploratory and confirmatory factor analyses, convergent validity, as well as Cronbach’s α and test−retest reliability. Satisfactory internal consistency (Cronbach’s α = 0.92) and test−retest reliability were demonstrated. Confirmatory factor analysis supported the proposed models as having acceptable model fit. Exploratory factor analysis and regression analyses showed that the CANRSE scale had good construct validity and criterion-related validity, respectively. Convergent validity was tested using the general self-efficacy scale and was found to be satisfactory (r = 0.53). The results indicate the CANRSE is reliable and valid, and further testing of its predictive validity is recommended. It can be used to examine the influence of professional self-efficacy in recognizing and reporting CAN cases and to evaluate the impact of training programs aimed at improving CAN reporting.

Exchanging data between Digital Human Modelling systems : a review of data formats

Digital human modeling (DHM) systems underwent significant development within the last years. They achieved constantly growing importance in the field of ergonomic workplace design, product development, product usability, ergonomic research, ergonomic education, audiovisual marketing and the entertainment industry. They help to design ergonomic products as well as healthy and safe socio-technical work systems. In the domain of scientific DHM systems, no industry specific standard interfaces are defined which could facilitate the exchange of 3D solid body data, anthropometric data or motion data. The focus of this article is to provide an overview of requirements for a reliable data exchange between different DHM systems in order to identify suitable file formats. Examples from the literature are discussed in detail. Methods: As a first step a literature review is conducted on existing studies and file formats for exchanging data between different DHM systems. The found file formats can be structured into different categories: static 3D solid body data exchange, anthropometric data exchange, motion data exchange and comprehensive data exchange. Each file format is discussed and advantages as well as disadvantages for the DHM context are pointed out. Case studies are furthermore presented, which show first approaches to exchange data between DHM systems. Lessons learnt are shortly summarized. Results: A selection of suitable file formats for data exchange between DHM systems is determined from the literature review.

Metrics for Understanding Communication on Twitter

As the systematic investigation of Twitter as a communications platform continues, the question of developing reliable comparative metrics for the evaluation of public, communicative phenomena on Twitter becomes paramount. What is necessary here is the establishment of an accepted standard for the quantitative description of user activities on Twitter. This needs to be flexible enough in order to be applied to a wide range of communicative situations, such as the evaluation of individual users’ and groups of users’ Twitter communication strategies, the examination of communicative patterns within hashtags and other identifiable ad hoc publics on Twitter (Bruns & Burgess, 2011), and even the analysis of very large datasets of everyday interactions on the platform. By providing a framework for quantitative analysis on Twitter communication, researchers in different areas (e.g., communication studies, sociology, information systems) are enabled to adapt methodological approaches and to conduct analyses on their own. Besides general findings about communication structure on Twitter, large amounts of data might be used to better understand issues or events retrospectively, detect issues or events in an early stage, or even to predict certain real-world developments (e.g., election results; cf. Tumasjan, Sprenger, Sandner, & Welpe, 2010, for an early attempt to do so).

Odometry-driven inference to link multiple exemplars of a location

A major challenge for robot localization and mapping systems is maintaining reliable operation in a changing environment. Vision-based systems in particular are susceptible to changes in illumination and weather, and the same location at another time of day may appear radically different to a system using a feature-based visual localization system. One approach for mapping changing environments is to create and maintain maps that contain multiple representations of each physical location in a topological framework or manifold. However, this requires the system to be able to correctly link two or more appearance representations to the same spatial location, even though the representations may appear quite dissimilar. This paper proposes a method of linking visual representations from the same location without requiring a visual match, thereby allowing vision-based localization systems to create multiple appearance representations of physical locations. The most likely position on the robot path is determined using particle filter methods based on dead reckoning data and recent visual loop closures. In order to avoid erroneous loop closures, the odometry-based inferences are only accepted when the inferred path's end point is confirmed as correct by the visual matching system. Algorithm performance is demonstrated using an indoor robot dataset and a large outdoor camera dataset.

Modeling bus rapid transit station bus queuing for operational analysis

This paper presents mathematical models for BRT station operation, calibrated using microscopic simulation modelling. Models are presented for station capacity and bus queue length. No reliable model presently exists to estimate bus queue length. The proposed bus queue model is analogous to an unsignalized intersection queuing model.

Humanities and social scientific research methods in porn studies

Porn studies researchers in the humanities have tended to use different research methods from those in social sciences. There has been surprisingly little conversation between the groups about methodology. This article presents a basic introduction to textual analysis and statistical analysis, aiming to provide for all porn studies researchers a familiarity with these two quite distinct traditions of data analysis. Comparing these two approaches, the article suggests that social science approaches are often strongly reliable – but can sacrifice validity to this end. Textual analysis is much less reliable, but has the capacity to be strongly valid. Statistical methods tend to produce a picture of human beings as groups, in terms of what they have in common, whereas humanities approaches often seek out uniqueness. Social science approaches have asked a more limited range of questions than have the humanities. The article ends with a call to mix up the kinds of research methods that are applied to various objects of study.

Retrieving dynamic origin-destination matrices from Bluetooth data

The Bluetooth technology is being increasingly used, among the Automated Vehicle Identification Systems, to retrieve important information about urban networks. Because the movement of Bluetooth-equipped vehicles can be monitored, throughout the network of Bluetooth sensors, this technology represents an effective means to acquire accurate time dependant Origin Destination information. In order to obtain reliable estimations, however, a number of issues need to be addressed, through data filtering and correction techniques. Some of the main challenges inherent to Bluetooth data are, first, that Bluetooth sensors may fail to detect all of the nearby Bluetooth-enabled vehicles. As a consequence, the exact journey for some vehicles may become a latent pattern that will need to be estimated. Second, sensors that are in close proximity to each other may have overlapping detection areas, thus making the task of retrieving the correct travelled path even more challenging. The aim of this paper is twofold: to give an overview of the issues inherent to the Bluetooth technology, through the analysis of the data available from the Bluetooth sensors in Brisbane; and to propose a method for retrieving the itineraries of the individual Bluetooth vehicles. We argue that estimating these latent itineraries, accurately, is a crucial step toward the retrieval of accurate dynamic Origin Destination Matrices.

Impact of high PV penetration on distribution transformer insulation life

The reliable operation of distribution systems is critically dependent on detailed understanding of load impacts on distribution transformer insulation systems. This paper estimates the impact of rooftop photovoltaic (PV) generation on a typical 200-kVA, 22/0.415-kV distribution transformer life under different operating conditions. This transformer supplies a suburban area with a high penetration of roof top photovoltaic systems. The transformer loads and the phase distribution of the PV systems are significantly unbalanced. Oil and hot-spot temperature and remnant life of distribution transformer under different PV and balance scenarios are calculated. It is shown that PV can significantly extend the transformer life.

Modal flexibility method for structural damage detection in suspension bridges

Suspension bridges meet the steadily growing demand for lighter and longer bridges in today’s infrastructure systems. These bridges are designed to have long life spans, but with age, their main cables and hangers could suffer from corrosion and fatigue. There is a need for a simple and reliable procedure to detect and locate such damage, so that appropriate retrofitting can be carried out to prevent bridge failure. Damage in a structure causes changes in its properties (mass, damping and stiffness) which in turn will cause changes in its vibration characteristics (natural frequencies, modal damping and mode shapes). Methods based on modal flexibility, which depends on both the natural frequencies and mode shapes, have the potential for damage detection. They have been applied successfully to beam and plate elements, trusses and simple structures in reinforced concrete and steel. However very limited applications for damage detection in suspension bridges have been identified to date. This paper examines the potential of modal flexibility methods for damage detection and localization of a suspension bridge under different damage scenarios in the main cables and hangers using numerical simulation techniques. Validated finite element model (FEM) of a suspension bridge is used to acquire mass normalized mode shape vectors and natural frequencies at intact and damaged states. Damage scenarios will be simulated in the validated FE models by varying stiffness of the damaged structural members. The capability of damage index based on modal flexibility to detect and locate damage is evaluated. Results confirm that modal flexibility based methods have the ability to successfully identify damage in suspension bridge main cables and hangers.

Bayesian inference of traffic volumes based on Bluetooth data

The study of the relationship between macroscopic traffic parameters, such as flow, speed and travel time, is essential to the understanding of the behaviour of freeway and arterial roads. However, the temporal dynamics of these parameters are difficult to model, especially for arterial roads, where the process of traffic change is driven by a variety of variables. The introduction of the Bluetooth technology into the transportation area has proven exceptionally useful for monitoring vehicular traffic, as it allows reliable estimation of travel times and traffic demands. In this work, we propose an approach based on Bayesian networks for analyzing and predicting the complex dynamics of flow or volume, based on travel time observations from Bluetooth sensors. The spatio-temporal relationship between volume and travel time is captured through a first-order transition model, and a univariate Gaussian sensor model. The two models are trained and tested on travel time and volume data, from an arterial link, collected over a period of six days. To reduce the computational costs of the inference tasks, volume is converted into a discrete variable. The discretization process is carried out through a Self-Organizing Map. Preliminary results show that a simple Bayesian network can effectively estimate and predict the complex temporal dynamics of arterial volumes from the travel time data. Not only is the model well suited to produce posterior distributions over single past, current and future states; but it also allows computing the estimations of joint distributions, over sequences of states. Furthermore, the Bayesian network can achieve excellent prediction, even when the stream of travel time observation is partially incomplete.

Validation of an instrument to measure governance and performance on collaborative infrastructure projects

Collaborative infrastructure projects use hybrid formal and informal governance structures to manage transactions. Based on previous desk-top research, the authors identified the key mechanisms underlying project governance, and posited the performance implications of the governance (Chen et al. 2012). The current paper extends that qualitative research by testing the veracity of those findings using data from 320 Australian construction organisations. The results provide, for the first time, reliable and valid scales to measure governance and performance of collaborative projects, and the relationship between them. The results confirm seven of seven hypothesised governance mechanisms; 30 of 43 hypothesised underlying actions; eight of eight hypothesised key performance indicators; and the dual importance of formal and informal governance. A startling finding of the study was that the implementation intensity of informal mechanisms (non-contractual conditions) is a greater predictor of project performance variance than that of formal mechanisms (contractual conditions). Further, contractual conditions do not directly impact project performance; instead their impact is mediated by the non-contractual features of a project. Obligations established under the contract are not sufficient to optimise project performance.

Rough set based approach to text classification

Textual document set has become an important and rapidly growing information source in the web. Text classification is one of the crucial technologies for information organisation and management. Text classification has become more and more important and attracted wide attention of researchers from different research fields. In this paper, many feature selection methods, the implement algorithms and applications of text classification are introduced firstly. However, because there are much noise in the knowledge extracted by current data-mining techniques for text classification, it leads to much uncertainty in the process of text classification which is produced from both the knowledge extraction and knowledge usage, therefore, more innovative techniques and methods are needed to improve the performance of text classification. It has been a critical step with great challenge to further improve the process of knowledge extraction and effectively utilization of the extracted knowledge. Rough Set decision making approach is proposed to use Rough Set decision techniques to more precisely classify the textual documents which are difficult to separate by the classic text classification methods. The purpose of this paper is to give an overview of existing text classification technologies, to demonstrate the Rough Set concepts and the decision making approach based on Rough Set theory for building more reliable and effective text classification framework with higher precision, to set up an innovative evaluation metric named CEI which is very effective for the performance assessment of the similar research, and to propose a promising research direction for addressing the challenging problems in text classification, text mining and other relative fields.

Higher-order non-linear analysis of steel structures. Part I : elastic second-order formulation

This paper presents a higher-order beam-column formulation that can capture the geometrically non-linear behaviour of steel framed structures which contain a multiplicity of slender members. Despite advances in computational frame software, analyses of large frames can still be problematic from a numerical standpoint and so the intent of the paper is to fulfil a need for versatile, reliable and efficient non-linear analysis of general steel framed structures with very many members. Following a comprehensive review of numerical frame analysis techniques, a fourth-order element is derived and implemented in an updated Lagrangian formulation, and it is able to predict flexural buckling, snap-through buckling and large displacement post-buckling behaviour of typical structures whose responses have been reported by independent researchers. The solutions are shown to be efficacious in terms of a balance of accuracy and computational expediency. The higher-order element forms a basis for augmenting the geometrically non-linear approach with material non-linearity through the refined plastic hinge methodology described in the companion paper.