Yliopiston reunalla. Tutkimus suomalaisen avoimen yliopiston muotoutumisesta

Avoin yliopisto on koulutusmuoto, johon kuka tahansa voi osallistua ja jossa voi suorittaa yliopistotasoisia opintoja. Avoimen yliopiston ideassa keskeistä on koulutuksellisen tasa-arvon edistämisen tavoite. Tämän tutkimuksen tehtävänä on kuvata ja analysoida suomalaisen avoimen yliopiston muotoutumista. Tutkimuksella etsitään vastauksia kolmeen kysymykseen: 1. Millaisten vaiheiden kautta avoin yliopisto on muotoutunut? Mitä avoimen yliopiston historiassa on tapahtunut ja millaista keskustelua näistä tapahtumista on käyty? 2. Millaisia diskursseja avointa yliopistoa koskeneessa keskustelussa voidaan tunnistaa ja miten eri toimijatahot ovat näihin puhetapoihin kiinnittyneet? 3. Millaisena koulutuksellisen tasa-arvon toteuttajana avoin yliopisto näyttäytyy tutkimusaineiston valossa? Tutkimuksen aineisto koostuu erilaisista julkisista teksteistä. Aineistossa on mukana useita erilaisia tekstityyppejä: komiteanmietintöjä ja työryhmäraportteja, korkeakoululaitoksen kehittämissuunnitelmia, muita suunnitteluasiakirjoja, tutkimuksia, selvityksiä, puheenvuoroja ja esitelmiä sekä lehtikirjoituksia. Täydentävänä aineistona on lisäksi käytetty tilastoja. Tutkimusaineistoa on analysoitu diskurssianalyysillä. Keskeisenä lähtökohtana analyysissa on, että tekstien avulla tuotetaan avointa yliopistoa koskevia käsityksiä ja merkityksiä. Nämä merkitykset myös muuttuvat ajassa. Aineiston analyysin tuloksena avoimen yliopiston historiassa voidaan erottaa erilaisia vaiheita ja näiden vaiheiden välisiä taitekohtia. Ensimmäiseksi murrokseksi avoimen yliopiston historiassa voidaan paikantaa avoimen yliopiston synty, joka ajoittui 1970-luvun alkupuoliskolle. Avoin yliopisto sai vakiintuneet puitteensa vasta 1980-luvun puolivälissä, jolloin se organisoitiin osaksi yliopistojen täydennyskoulutusta. Tämä voidaan nähdä avoimen yliopiston historian toisena murroksena. Kolmas murros ajoittui 1990-luvulle, jolloin avoimen yliopiston resursointi muuttui ja nuoret tulivat sen näkyväksi opiskelijaryhmäksi. Tämä murros problematisoi avoimen yliopiston ja tutkintokoulutuksen suhteen aiemmasta poikkeavalla tavalla ja avoimen yliopiston tutkintoväylä nousi keskeiseksi keskusteluteemaksi. Tämä jännite purkautui tultaessa 2000-luvulle, ja tutkinnonuudistuksen yhteydessä avoimen yliopiston väylä sai paikkansa suhteessa kahden syklin tutkintoihin. Nyt elämme tutkinnonuudistuksen jälkeistä aikaa, jolloin avoimen yliopiston väylä vertautuu paljolti maisterikoulutuksiin. Kysymys aikuisten asemasta suhteessa tutkintokoulutukseen on kuitenkin edelleen ajankohtainen. Esillä ovat etenkin kysymykset aiemmin opitun tunnustamisesta, aikuisten ohjauksesta sekä avoimen yliopiston suhteesta työ- ja elinkeinoelämään. Keskustelussa avoimesta yliopistosta on paikannettavissa erilaisia positioita, jotka määrittävät avoimen yliopiston merkitystä ja tehtävää. Näitä positioita voidaan nimittää diskursseiksi, jotka konstituoivat avoimen yliopiston paikkaa yliopistokoulutuksen kentällä. Aineistosta on paikannettu neljä eri diskurssia: (1) akateemisia arvoja painottava yliopistollinen diskurssi, (2) osallistumisen tasa-arvoa korostava sivistyksellisen demokratian diskurssi, (3) yksilöllisiä mahdollisuuksia ja innovatiivisuutta korostava joustavuuden diskurssi sekä (4) työelämää, taloudellisuutta ja statusta korostava tehokkuuden diskurssi. Nämä diskurssit käyvät aineiston teksteissä keskinäisiä neuvotteluja ja kantavat merkityksiä suhteessa toisiinsa. Diskurssien välisiä suhteita voidaan kuvata kahden eri dimension kautta. Yhtäältä vastakkaisiksi arvoiksi asettuvat akateeminen eksklusiivisuus ja koulutuksellinen tasa-arvo. Toisena ulottuvuutena on koulutuksen arvottaminen sivistyksen versus hyödyn näkökulmasta. Avoimen yliopiston tehtävä tasa-arvon edistäjänä on eri aikoina mielletty eri tavoin. Avoimen yliopiston historiassa sen merkitystä ja tehtävää on kehystetty erilaisin puhetavoin, ja eri diskurssipositioiden vuoropuhelun kautta myös avoimen yliopiston tasa-arvotehtävästä on eri aikoina keskusteltu eri tavoin. Avoimen yliopiston alkuvaiheessa sen tehtävänä näyttäytyi sivistyksellisen demokratian turvaajana toimiminen. Kun avoimen yliopiston kurssit käynnistyivät, määrittyi toiminta selkeästi aikuisten koulutukseksi. Avoin yliopisto määrittyikin nyt aikuisten toiseksi mahdollisuudeksi hankkia koulutusta, jota vaille he olivat nuorempina jääneet. Avoimen yliopiston puitteiden lukkoonlyömisen jälkeen keskustelussa nousi vahvasti esiin toiminnan ja opetusmuotojen kehittäminen. Avoin yliopisto määrittyikin nyt aikuisten monipuoliseksi ja joustavaksi koulutusmahdollisuudeksi. Tasa-arvoisten mahdollisuuksien luominen näyttäytyi innovatiivisena, dynaamisena ja eteenpäinpyrkivänä toimintana, jossa otettiin huomioon aikuisten erilaiset tarpeet. Relander-ohjelman myötä avoimen yliopiston julkilausuttu tehtävä nimenomaan aikuisten kouluttajana kuitenkin muuttui. Avoin yliopisto näyttäytyi nyt yksilöllisiä tarpeita palvelevana mahdollisuuksien talona, jossa oli sijaa kaikille. Tärkeäksi määrittyi myös opiskelun tavoitteiden ja motiivien moninaisuus. Tutkinnon suorittamisen avoimen yliopiston opintojen kautta tuli olla realistisesti mahdollista. Viimeisimmän murroksen jälkeen avoin yliopisto määrittyy yhä selvemmin työelämän sekä alueellisten tarpeiden kautta. Avoin yliopisto näyttäytyy joustavana ja erilaisia tarpeita palvelevana opiskelufoorumina. Avoin yliopisto palvelee paitsi yksilöiden, myös työelämän ja yritysten tarpeita sekä on osaltaan turvaamassa alueiden kilpailukykyä ja elinvoimaisuutta. Tässä tutkimuksessa tarkastellaan avointa yliopistoa, sen historiaa ja siitä käytyä keskustelua erityisesti tasa-arvon näkökulmasta. Yhtenä keskeisenä tuloksena on, että avoimen yliopiston paikka on ollut aina jollakin tavalla marginaalissa. Tätä ilmentää mm. yliopistollisuuden ja tasa-arvon välinen jännite, jonka ympärille avointa yliopistoa koskeva keskustelu paljolti on järjestynyt. Ylipäätään aikuisten asemaa yliopistossa määrittää tietty epämukavuus ja täyden legitimiteetin puute erityisesti suhteessa tutkintokoulutukseen. Aikuisten koulutuksesta puhutaan yliopiston yhtenä perustehtävänä ja retorisesti voidaan todeta tämän tehtävän tärkeys. Aikuinen opiskelija aiempine osaamisineen ja osaamistarpeineen positioituu kuitenkin yliopistokoulutuksen ja työelämän väliselle rajapinnalle. Aikuisen paikka määrittyykin yliopiston ytimeen nähden selvästi marginaaliin.

Performance and scalability of isolated DC-DC converter topologies in low voltage, high current applications

Fuel cells are a promising alternative for clean and efficient energy production. A fuel cell is probably the most demanding of all distributed generation power sources. It resembles a solar cell in many ways, but sets strict limits to current ripple, common mode voltages and load variations. The typically low output voltage from the fuel cell stack needs to be boosted to a higher voltage level for grid interfacing. Due to the high electrical efficiency of the fuel cell, there is a need for high efficiency power converters, and in the case of low voltage, high current and galvanic isolation, the implementation of such converters is not a trivial task. This thesis presents galvanically isolated DC-DC converter topologies that have favorable characteristics for fuel cell usage and reviews the topologies from the viewpoint of electrical efficiency and cost efficiency. The focus is on evaluating the design issues when considering a single converter module having large current stresses. The dominating loss mechanism in low voltage, high current applications is conduction losses. In the case of MOSFETs, the conduction losses can be efficiently reduced by paralleling, but in the case of diodes, the effectiveness of paralleling depends strongly on the semiconductor material, diode parameters and output configuration. The transformer winding losses can be a major source of losses if the windings are not optimized according to the topology and the operating conditions. Transformer prototyping can be expensive and time consuming, and thus it is preferable to utilize various calculation methods during the design process in order to evaluate the performance of the transformer. This thesis reviews calculation methods for solid wire, litz wire and copper foil winding losses, and in order to evaluate the applicability of the methods, the calculations are compared against measurements and FEM simulations. By selecting a proper calculation method for each winding type, the winding losses can be predicted quite accurately before actually constructing the transformer. The transformer leakage inductance, the amount of which can also be calculated with reasonable accuracy, has a significant impact on the semiconductor switching losses. Therefore, the leakage inductance effects should also be taken into account when considering the overall efficiency of the converter. It is demonstrated in this thesis that although there are some distinctive differences in the loss distributions between the converter topologies, the differences in the overall efficiency can remain within a range of a few percentage points. However, the optimization effort required in order to achieve the high efficiencies is quite different in each topology. In the presence of practical constraints such as manufacturing complexity or cost, the question of topology selection can become crucial.

Cross-cultural knowledge transfer within a multinational company

The ability to share knowledge efficiently is vital in day-to-day operations of multinational companies. Therefore, the tools for the effective knowledge sharing along with the transfer knowledge models are of a primary interest for the companies. Knowledge transfer often involves participants of different cultural background. The purpose of this research is to investigate how the cross-cultural knowledge transfer in a multinational corporation takes place and how the successful knowledge transfer is ensured. The four sub-questions will help to answer the research question. Firstly, the author will try to identify what difficulties might occur while transferring knowledge in a multicultural environment. Secondly, the cultural differences’ impact on cross-cultural communication will be explored. Thirdly, the tools and models for effective tacit knowledge transfer will be covered by the author. Lastly, the methods of assessing if a knowledge transfer was successful or not will be discussed. The focus of this thesis is on knowledge transfer within a multinational setting. A multinational corporation is used as a practical example for this study; namely the Training Centre of the multinational corporation. The study was carried out by using a qualitative research approach. The four employees of the Training Centre were interviewed in order to obtain the answers to the research questions. The complete idea of the data gathering process can be obtained by reading through the first part of the methodology section Furthermore, the matters of transferability, confirmability, trustworthiness and objectivity were discussed in the methodological section. The study indicates that in order to carry out the successful and efficient knowledge transfer several requests have to be met. Mutual motivation, e.g. the motivation of both knowledge sender and knowledge receiver is one of the most important determinants of knowledge transfer. Sufficient and bearable workload for the knowledge senders is important to ensure the quality and involvement of the knowledge sender into knowledge transfer process. Course contents, infrastructure and other matters will be discussed further on in relation of successful knowledge transfer. Influences of cultural differences on knowledge sharing were studied in this thesis. At the end of the empirical study- a model used to transfer knowledge in Training Centre will be presented. The model created proves to be functional and appropriate for transferring knowledge to representatives of different cultures.

Collaborative information behaviour : a case study of two research groups

The aim of the licentiate thesis is to examine researchers' information practices in research groups. The researchers were involved with study communication and media related issues within Social Sciences and Humanities Faculties. The theoretical framework of the study comprises the new holistic models of information seeking (for example: Meho and Tibbo, 2003; Seldén, 1999) and the collective aspects of information behaviour (Prekop, 2002 ; Talja, 2002; Talja and Hansen, 2006). The research questions are: 1. How do scholars seek information in research groups? 2 What kind of collaborative information behaviour occurs in the research groups? The research data was gathered by interviews and observations. Three meetings of a research group at the University of Tampere were observed during the autumn of 2004. The group members and the group leader of the research group were interviewed in the spring of 2005. The research group members and the group leader of a research group at the University of Jyväskylä were interviewed in the autumn of 2005. Altogether, two research group leaders and eight researchers were interviewed. The significance of the research group for information seeking is more important in closeknit research groups than in rather loose research groups. The significance of the research group for information seeking can be at least threefold. First, research group members can inform the group about relevant information resources and potential library or other information services. Second, the research group can to some extent compensate for the information seeking systems of libraries by distributing material and information resources. Third, information seeking can be carried out in collaboration in research groups. The significance of the research group was found to be most important in informing about new information services and marketing library systems. Recommendations from colleagues were often needed to mobilize researchers into using new library services. The significance of colleagues in informing about library services is in line with earlier studies. The present study showed that sometimes information from colleagues was regarded as more important than information distributed directly by the local library. A culture of information sharing, including mutual trust, seemed mainly to be reflected in collaboration and collaborative information seeking in the research groups studied. The timing of the onset of individual research seemed to be related to the information sharing culture and social networks in research groups. The simultaneous onset of the research work by group members seemed to promote the growth of unbiased collaboration, also in information seeking.

Exploring relationship between marketing and sales - a case study of B2B ICT solution sales

Following the current trend of companies in changing and developing their businesses from transactional approach to relationship and solution oriented approach has set new requirements to internal cooperation of companies too. The relationship between marketing and sales has been identified to be critical to company's success here, but surprisingly little is known about it. The purpose of this study was to deepen understanding of the relationship between sales and marketing in business-to-business sales from operative sales employees' perspectives in solution selling context. The aim was to develop an explorative analytical construction and framework of the interface. The study was conducted as a literature review and an empirical qualitative explorative single case study. The data was collected by conducting six thematic interviews with sales employees of the case company. Observing sales and marketing, written documents and other materials used in sales were used as secondary source of information. The data was analyzed using qualitative case study analysis methods. The findings of the study support previous research findings of the interface between marketing and sales but also bring new propositions as analytical framework to construct the interface. As such, the interface was found to be a multi-dimensional and complex dynamic construction. As results of this study, there was an exploratory framework constructed. The construction consists of three explorative contexts of the interface: internal context, relationship emphasizing context and solution selling context. These contexts are further divided into lower levels as an outcome of the analysis. In addition the identified contexts, there are also conceptual domains identified, which are common to all the contexts. The role of mutual, cross-functional knowledge creation was found to be central in the interface.

A high frequency electronic transducer for multiphase flow measurements

This paper describes an electronic transducer for multiphase flow measurement. Its high sensitivity, good signal to noise ratio and accuracy are achieved through an electrical impedance sensor with a special guard technique. The transducer consists of a wide bandwidth and high slew rate differentiator where the lead inductance and stray capacitance effects are compensated. The sensor edge effect is eliminated by using a guard electrode based on the virtual ground potential of the operational amplifier. A theoretical modeling and a calibration method are also presented. The results obtained seem to confirm the validity of the proposed technique.

Tooth-Coil Permanent Magnet Synchronous Machine Design for Special Applications

This doctoral thesis presents a study on the design of tooth-coil permanent magnet synchronous machines. The electromagnetic properties of concentrated non-overlapping winding permanent magnet synchronous machines, or simply tooth-coil permanent magnet synchronous machines (TC-PMSMs), are studied in details. It is shown that current linkage harmonics play the deterministic role in the behavior of this type of machines. Important contributions are presented as regards of calculation of parameters of TC-PMSMs,particularly the estimation of inductances. The current linkage harmonics essentially define the air-gap harmonic leakage inductance, rotor losses and localized temporal inductance variation. It is proven by FEM analysis that inductance variation caused by the local temporal harmonic saturation results in considerable torque ripple, and can influence on sensorless control capabilities. Example case studies an integrated application of TC-IPMSMs in hybrid off-highway working vehicles. A methodology for increasing the efficiency of working vehicles is introduced. It comprises several approaches – hybridization, working operations optimization, component optimization and integration. As a result of component optimization and integration, a novel integrated electro-hydraulic energy converter (IEHEC) for off-highway working vehicles is designed. The IEHEC can considerably increase the operational efficiency of a hybrid working vehicle. The energy converter consists of an axial-piston hydraulic machine and an integrated TCIPMSM being built on the same shaft. The compact assembly of the electrical and hydraulic machines enhances the ability to find applications for such a device in the mobile environment of working vehicles.Usage of hydraulic fluid, typically used in working actuators, enables direct-immersion oil cooling of designed electrical machine, and further increases the torque- and power- densities of the whole device.

The Influence of Network Competence on Internationalization of SMEs

This study focuses on the relationship between organizational network competence and the internationalization process of small- and medium sized enterprises (SMEs). Over recent decades, the global business environment has become increasingly conducive to internationalization of small firms. A central facilitating factor in the process has been the emergence of networked business relationships between internationalizing firms. Research on SME internationalization has found that certain types of structures and dynamics of business networks allow SMEs access to the resources they need to enter foreign markets. This consequently means that their internationalization often becomes to depend on the networks they are embedded in. However, research so far has mostly ignored the possibility that the organizational ability to develop and manage business network relationships, network competence, may be a major underlying factor in determining how well SMEs can leverage their network relationships to enter foreign markets and consequently may determine in large part how successful their internationalization process turns out to be. This study aims to respond to those gaps, by empirically examining how the development of network competence in internationalizing SMEs influences the internationalization outcomes that they can expect, and how such network competence is conceptualized and developed. Using a mixed methods approach, survey data collected from 298 Finnish SMEs across five industry sectors is first used to examine how levels of network competence are related to internationalization propensity of SMEs and their subsequent international performance, growth and profitability as internationally operating firms. In order to illustrate in more detail the ways in which network competence is conceptualized and how it develops during the internationalization process of an SME, qualitative data from internationally operating Finnish SMEs are used. Longitudinal interview data of an internationalizing Finnish SME is accompanied by data gathered through a series of semistructured interviews of Finnish and Russian managers involved in mutual business relationship dyads. Structurally, this thesis examines the research issue as an article-based dissertation, consisting of five journal and conference publications. Three of these publications are based on the quantitative data, and the remaining two apply the qualitative interview data. The results find several aspects where network competence has a positive influence on the success of internationalizing SMEs, how it develops and what it entails conceptually in this context. Quantitatively, the level of network competence is found to have a positive relationship to various internationalization outcomes, including the propensity of SMEs to enter foreign markets and on their subsequent international performance, their growth and their profitability. Additionally, the positive relationship is divided between the relationship-specific and cross-relational dimension of network competence, in that the influence of the former is relevant for the propensity to internationalize, while the latter is for the growth and profitability of the already internationalized SMEs. Qualitatively, the results suggest, firstly, that the development process of network competence does not necessarily precede the start of the internationalization process, but may occur through a gradual learning process alongside it. And secondly, the results also imply that the conceptualization of network competence by Finnish managers of internationally operating Finnish SMEs is structurally distinct from that of their culturally distinct partner managers in Russia. This study contributes to the literature on SME internationalization in several ways. Firstly, it introduces operationalized organizational competencies to the literature on internationalization of SMEs, which has so far mainly examined the influence of business networking on the internationalization process without having such an organizational viewpoint. Furthermore, this study provides a multi-level analysis of the determinants of successful SME internationalization, by examining various strategic and performance outcomes across the process. These results also contribute to the literature on organizational strategy of internationalizing SMEs, by clarifying how different dimensions of business networking may be optimal in different phases of the internationalization process. Conceptually, the results of this study contribute to the literature on competence development and SME internationalization, by illustrating how the development process of network competence may occur during internationalization process. Thus, they also contribute to the discussion on how SMEs are able to influence the dynamics and structures of their business networks over time. Finally, this study contributes to the literature on the role of culture in the internationalization process, by implying that the cultural background of the manager of the SME may determine whether business networking and network competence is seen as an organizational-level or an individual level capability. The study also includes some additional contributions to the literature on dynamic capabilities in strategic management, and on that of strategic business networks. These include further clarifying the exact nature and tangibility of dynamic capabilities, and being one of the first studies to introduce constructs from both dynamic capabilities and business network literature to the field of international entrepreneurship. And finally, the study also has some contribution on the two streams of literature, in illustrating how both dyadic and network-level capabilities may be relevant, depending on the current strategic goals and market position of the firm. Keywords: network competence, internationalizatio

Accounting for competition, governance and accountability during institutional change in not-for-profit and public sector organisations

Purpose The aim of this thesis1 is to analyse theoretically how institutionalisation of competitive tendering2, governance and budgetary policies cannot be taken for granted to lead to accountability among institutional actors3. The nature of an institutionalised management accounting policy, its relevance as a source of power in organisational decision making, and in negotiating inter-organisational relationships, are also analysed. Practical motivation The practical motivation of the thesis is to show how practitioners and policy makers can institutionalise changes which improve the power of management accounting and control systems4 as a mechanism of accountability among institutional actors and in negotiating relationships with other organisations. Theoretical motivation and conceptual approach The theoretical motivation of the thesis is to extend the institutional framework of management accounting change proposed by Burns and Scapens (2000) by using the theories of critical realism, communicative action, negotiated order and the framework of circuits of power. The Burns and Scapens framework needs further theorisation to analyse the relationship between the institutionalisation of management accounting and accountability; and the relevance of management accounting information in negotiating in inter-organisational relationships. Methodology and field studies Field research took place in public and not-for-profit health care organisations and a municipality in Finland from 2008 to 2013. Data were gathered by document analysis, interviews, participation in meetings and observations. Findings The findings are explained in four different essays that show that institutionalisation of competitive tendering, governance and budgetary policies cannot be taken for granted to lead to accountability among institutional actors. The ways by which institutional actors think and act can be influenced by other institutional mechanisms, such as inter-organisational circuits of power and intraorganisational governance policies, independent of the institutional change process. The relevance of institutionalised management accounting policies in negotiating relationships between two or more organisations depends on processes and contexts through which institutional actors use management accounting information as a tool of communication, mutual understanding and power. Research limitations / implications The theoretical framework used can be applied validly in other studies. The empirical findings cannot be generalised directly to other organisations than the organisations analysed. Practical implications Competitive tendering and budgetary policies can be institutionalised to shape actions of institutional actors within an organisation. To lead to accountability, practitioners and policy makers should implement governance policies that increase the use of management accounting information in institutional actors’ thinking, actions and responsibility for their actions. To reach a negotiated order between organisations, institutionalised management accounting policies should be used as one of the tools of communication aiming to reach mutual agreement among institutional actors.

Creating an open-books implementation framework for a maintenance-related value-based life-cycle model

This study is a qualitative action research by its nature with elements of personal design in the form of a tangible model implementation framework construction. Utilized empirical data has been gathered via two questionnaires in relation to the arranged four workshop events with twelve individual participants. Five of them represented maintenance customers, three maintenance service providers and four equipment providers respectively. Further, there are two main research objectives in proportion to the two complementary focusing areas of this thesis. Firstly, the value-based life-cycle model, which first version has already been developed prior to this thesis, requires updating in order to increase its real-life applicability as an inter-firm decision-making tool in industrial maintenance. This first research objective is fulfilled by improving appearance, intelligibility and usability of the above-mentioned model. In addition, certain new features are also added. The workshop participants from the collaborating companies were reasonably pleased with made changes, although further attention will be required in future on the model’s intelligibility in particular as main results, charts and values were all reckoned as slightly hard to understand. Moreover, upgraded model’s appearance and added new features satisfied them the most. Secondly and more importantly, the premises of the model’s possible inter-firm implementation process need to be considered. This second research objective is delivered in two consecutive steps. At first, a bipartite open-books supported implementation framework is created and its different characteristics discussed in theory. Afterwards, the prerequisites and the pitfalls of increasing inter-organizational information transparency are studied in empirical context. One of the main findings was that the organizations are not yet prepared for network-wide information disclosure as dyadic collaboration was favored instead. However, they would be willing to share information bilaterally at least. Another major result was that the present state of companies’ cost accounting systems will definitely need implementation-wise enhancing in future since accurate and sufficiently detailed maintenance data is not available. Further, it will also be crucial to create supporting and mutually agreed network infrastructure. There are hardly any collaborative models, methods or tools currently in usage. Lastly, the essential questions about mutual trust and predominant purchasing strategies are cooperation-wise important. If inter-organizational activities are expanded, a more relational approach should be favored in this regard. Mutual trust was also recognized as a significant cooperation factor, but it is hard to measure in reality.

„Und frei erklär' ich alle meine Knechte“ : Höflichkeit als Ausdruck sozialer Utopie in Schillers Drama Wilhelm Tell.

My dissertation is an interdisciplinary study of the relationship between the Swiss peasants and nobles in Friedrich Schiller’s play Wilhelm Tell (1804). Changes to this relationship are of particular interest. Communication in the play is examined via a micro-analysis based on Penelope Brown’s and Stephen C. Levinson’s theoretical framework Politeness: Some universals in language usage. (1978, 1987). Brown and Levinson distinguish between positivepoliteness and negative-politeness strategies and their distinction is useful for my argument, since they claim that the use of positive-politeness strategies reflects the speaker’s intention to minimize the distance between the interlocutors (Brown and Levinson 1987: 103). Negative-politeness strategies, by contrast, result in social distancing (Brown and Levinson 1987: 130). In accordance with Brown’s and Levinson’s theory, it can be argued that the distribution of positive-politeness and negative-politeness strategies reflects changes in the distance between the fictional interlocutors as representatives of their social classes in Wilhelm Tell. The analysis of the communication in the play highlights that existing conflicts within the social groups are resolved and replaced with solidarity (cf. ‘Claim ’common ground’ and ‘Claim in-group membership with H’) before the peasants and noblemen appear on stage simultaneously in III, 3. In the scene in question, Geßler forces Tell to shoot the apple off his son’s head. Although both nobles and peasants are present, they do not communicate with each other. Thus, communication between the social classes occurs for the first time in IV, 2. This scene is crucial with regard to the changes in the relationship between the social classes in the play. The younger generation, with Rudenz as a representative of the nobility and Melchthal as a representative of the peasants, break with the prevailing conventions and initiate a new type of cooperation based on mutual helping and equality in the right and the duty to protect the country from the violent oppressors representing Habsburg (cf. ‘Convey that S and H are cooperators’, ‘Claim reflexivity’ and ‘Claim reciprocity’). The linguistic analysis reveals the crucial role of the Swiss nobility in the development of the social utopia, as well as the non-contribution of Wilhelm Tell. In fact, Tell never communicates with the Swiss noblemen. The role of the nobility and the role of Wilhelm Tell are further investigated in a comparison between Schiller’s Wilhelm Tell and four of Schiller’s historical sources. These sources, which contain earlier, non-dramatic versions of the establishment of the Swiss Confederation, are the following: Kronica von der loblichen Eydtgnoschaft compiled by Petermann Etterlin (1507), Gemeiner loblicher Eydgnoschafft Stetten Landen vnd Völckeren Chronik wirdiger thaaten beschreybung (1548) written by Johann Stumpf, Chronicon Helveticum of Aegidius Tschudi (the publication of Iselin from 1734 and 1736) and Johannes von Müller’s Geschichten schweizerischer Eidgenossenschaft (1786). Thecomparison sheds light on the fact that both Tschudi and von Müller emphasize unity among the Swiss and cooperation in their attempt to defeat the enemy. However, Schiller has reinforced the role of the nobility in the cooperation. In addition, the comparison between Schiller’s play and the historical sources reveals profound differences with regard to the role of Wilhelm Tell. In all of Schiller’s sources, Tell is present at Rütli, whereas he is absent from Rütli in Schiller’s play. In the play in general, Tell is conspicuously separated from the other peasants. Explanations of my linguistic results, which correspond to the above mentioned differences between the roles of the figures in Wilhelm Tell and the depictions in Schiller’s sources, are found by comparing the path of Schiller’s Swiss towards an egalitarian perspective with the kind of social evolution depicted by the German philosopher Johann Benjamin Erhard in his essay Über das Recht des Volks zu einer Revolution (1795). Aiming at considering Schiller’s social utopia within the larger cultural framework of the German response to the French Revolution, the comparison suggests that both authors depict the need for social change in terms of a change in social hierarchies (Erhard 1970: 95-96, cf. Foi 2005: 225). Erhard’s essay thus helps explain the political intention of Schiller’s play to keep the ideals of the French Revolution as crucial aims but profoundly change the means towards freedom and equality. In his attempt to claim the political resistance of the nobles and peasants as just, however, Schiller sacrificed the figure of Wilhelm Tell. Guilty of the murder of Geßler, Tell was no longer suitable for the righteous revolution imagined by Schiller (cf. Bloch 2008: 215 and Schulz 2005: 228). This explains Tell’s absence in the Rütli scene, his isolation in the plot, as well as his non-contribution to the social utopia. Together, the linguistic analysis and contextualisation of Schiller’s play support my hypothesis that Wilhelm Tell describes a process of change in the relationship between peasants and nobles. The interdisciplinary approach to the topic proved to be fruitful for all areas of the research involved.

Kysyntä-toimitusketjun synkronointi epävarman kysynnän ja tarjonnan toimintaympäristössä

Kysynnän ja tarjonnan epävarmuudet ovat nykyisin arkipäivää useilla toimialoilla. Elämme epävarmuuden suhteen ennen näkemättömiä aikoja, minkä on arvioitu jatkuvan myös tulevaisuudessa. Yritysten tilauskannat ovat lyhyitä, ja tilaukset viivästyvät tai peruuntuvat kokonaan. Toisaalta tarjonnan epävarmuudet aiheuttavat asiakasyrityksille haasteita esimerkiksi toimitusmyöhästymisten muodossa. Tuotannon ollessa hajaantunut verkostoihin yksittäisten yritysten toiminta ja päätökset vaikuttavat toisten verkostoyritysten toimintaan. Tämän takia epävarmuuden aiheuttamista muutoksista ja poikkeamista tulisi tiedottaa kumppaniyrityksiä, jotta kaikki pysyisivät samalla kellotaajuudella. Operatiivisen ja taktisen tiedon jakaminen on nykyisissä toimitusketjuissa jo arkipäivää, mutta yritysten välisistä rajapinnoista löytyy edelleen kehitettävää. Riittävästä ei kiinnitetä huomiota vastaanottajan kykyyn ja tapaan hyödyntää informaatiota – varsinkaan muutostilanteissa. Ajan/nopeuden ollessa yhä tärkeämpi kilpailutekijä informaation ajoituksella on kriittinen merkitys kysyntä-toimitusketjujen kokonaissuorituskykyyn. Toisin sanoen, millä ajanhetkellä tietoa tulisi jakaa, jotta kumppani pystyisi hyödyntämään saamaansa tietoa mahdollisimman hyvin. Kysyntä-toimitusketjun synkronoinnilla tarkoitetaan tässä väitöstutkimuksessa nimenomaan aikatekijään keskittymistä yritysten välisessä päätöksenteossa ja informaation jakamisessa toimitusketjun kokonaissuorituskyvyn parantamiseksi. Tutkimus kytkeytyy toimitusketjukoordinoinnin tieteelliseen keskusteluun. Koordinointiteorian keskeinen osa ovat riippuvuussuhteet, joita johdetaan koordinointimekanismien avulla. Kysyntätoimitusketjun synkronointia on mallinnettu aikaisemmin VOP-OPP-mallin (Value Offering Point – Order Penetration Point) ja sen johdannaisten avulla. Näissä malleissa asiakasyrityksen kysyntäketju ja toimittajayrityksen toimitusketju ovat keskinäisessä riippuvuussuhteessa, jota johdetaan päätöksenteon synkronoinnin ja informaation jakamisen koordinointimekanismeilla. VOP-OPP-malli johdannaisineen eivät kuitenkaan huomioi epävarman toimintaympäristön vaikutuksia synkronointiin. Näissä malleissa informaation ainoana laatudimensiona tarkasteltava aikatekijä on liian kapea-alainen näkökulma synkronointiin epävarmassa ympäristössä. Lisäksi nämä mallit keskittyvät vain yksisuuntaiseen, kysyntälähtöiseen, synkronointiin jättäen huomioimatta tarjontalähtöisen synkronoinnin. Aikatekijä- ja kokonaissuorituskykypainotustensa takia VOP-OPP-malli tarjosi kuitenkin hyvän lähtöfilosofian uusien synkronointimallien kehittämiseen. Väitöstutkimus toteutettiin hypoteettis-deduktiivisena tapaustutkimuksena, jossa ensin luotiin kirjallisuuden perusteella uudet teoreettiset synkronointimalliehdotukset. Tämän jälkeen ehdotusten toimivuutta arvioitiin käytännön kysyntä-toimitusketjuissa. Tutkimuksen uutuusarvo liittyy kysyntä-toimitusketjun synkronoinnin keskeisten piirteiden systeemiseen mallintamiseen epävarmassa toimintaympäristössä. Kontribuutiona esitetään kysyntä-toimitusketjun synkronoinnin moniulotteinen kokonaismalli, joka sisältää koordinointimekanismeina päätöksenteon synkronoinnin, informaation läpinäkyvyyden sekä asiakas- ja toimittajapään joustot. Tiedon vaihtoa mallissa tarkastellaan kaksisuuntaisesti – kysyntä- ja tarjontalähtöisesti. Informaation laatudimensioina mallissa ovat informaation ajoitus, luotettavuus ja tarkkuus. Kokonaismalli sisältää kolme alimallia: Demand Visibility Point – Demand Penetration Point (DVP-DPP) on kysyntälähtöisen synkronoinnin malli, Supply Visibility Point – Supply Information Penetration Point (SVP-SIPP) on tarjontalähtöisen synkronoinnin malli ja Integroitu DVP-DPP - SVP-SIPP-malli kytkee edellä mainitut mallit toisiinsa. Näissä alimalleissa informaation eri luokkia ovat tilausta edeltävä, tilaukseen liittyvä, tilauksen jälkeinen ja sovitun toimitusajankohdan jälkeinen kysyntä- ja tarjontatieto. Käytännön hyödyntämisen näkökulmasta mallit toimivat ns. mentaalitason koordinointimekanismeina, joiden tarkoitus on herättää toimitusketjukumppanit tavoittelemaan kokonaissuorituskyvyn parantamista oman edun tavoittelemisen sijasta. Tutkimuksen päärajoitteena on sen keskittyminen ainoastaan kahdenvälisiin yhteistyösuhteisiin, mikä tarjoaa nykyisessä verkostoituneessa toimintaympäristössä varsin kapean kuvan käytännön synkronointihaasteisiin.

Kestomagneettitahtikonekäyttöjen erot

Permanent magnet drives with nominal power over 10 kW were not a cost-sufficient system 25 years ago due to high material expenses. The improvements in motor drives, the rise in competition and the tightening of standards and regulations have caused that the PM-drives are more and more common in the over 10 kW nominal power range. The goal of this thesis is to research the performance in relation to nominal power of a PM-drive technique that is vastly increasing its popularity in fan related devices. The studied motor technique brushless direct current drive (BLDC) consists of a voltage source inverter, permanent motor and six-step-control. The reference drive is a brushless alternating current drive (BLAC) which consists of a VSI, PM and a hysteresis control. As a conclusion there are no major obstacles that would impede the BLDC-drive technique from expanding to larger power stages. The following factors must be taken into consideration when designing a BLDC-drive: motor’s current change rate, inverter switching frequency, motor’s nominal electric frequency, phase inductance and the current handling capability of the inverter. The fluctuating material costs create instability to the end prices of PM-motors that can in the worst case lead to diminished interest towards BLDC- and PM-drives in general.

Assessment of Young Learners’ English Proficiency in Bilingual Content Instruction CLIL

This applied linguistic study in the field of second language acquisition investigated the assessment practices of class teachers as well as the challenges and visions of language assessment in bilingual content instruction (CLIL) at primary level in Finnish basic education. Furthermore, pupils’ and their parents’ perceptions of language assessment and LangPerform computer simulations as an alternative, modern assessment method in CLIL contexts were examined. The study was conducted for descriptive and developmental purposes in three phases: 1) a CLIL assessment survey; 2) simulation 1; and 3) simulation 2. All phases had a varying number of participants. The population of this mixed methods study were CLIL class teachers, their pupils and the pupils’ parents. The sampling was multi-staged and based on probability and random sampling. The data were triangulated. Altogether 42 CLIL class teachers nationwide, 109 pupils from the 3rd, 4th and 5th grade as well as 99 parents from two research schools in South-Western Finland participated in the CLIL assessment survey followed by an audio-recorded theme interview of volunteers (10 teachers, 20 pupils and 7 parents). The simulation experimentations 1 and 2 produced 146 pupil and 39 parental questionnaires as well as video interviews of volunteered pupils. The data were analysed both quantitatively using percentages and numerical frequencies and qualitatively employing thematic content analysis. Based on the data, language assessment in primary CLIL is not an established practice. It largely appears to be infrequent, incidental, implicit and based on impressions rather than evidence or the curriculum. The most used assessment methods were teacher observation, bilingual tests and dialogic interaction, and the least used were portfolios, simulations and peer assessment. Although language assessment was generally perceived as important by teachers, a fifth of them did not gather assessment information systematically, and 38% scarcely gave linguistic feedback to pupils. Both pupils and parents wished to receive more information on CLIL language issues; 91% of pupils claimed to receive feedback rarely or occasionally, and 63% of them wished to get more information on their linguistic coping in CLIL subjects. Of the parents, 76% wished to receive more information on the English proficiency of their children and their linguistic development. This may be a response to indirect feedback practices identified in this study. There are several challenges related to assessment; the most notable is the lack of a CLIL curriculum, language objectives and common ground principles of assessment. Three diverse approaches to language in CLIL that appear to affect teachers’ views on language assessment were identified: instrumental (language as a tool), dual (language as a tool and object of learning) and eclectic (miscellaneous views, e.g. affective factors prioritised). LangPerform computer simulations seem to be perceived as an appropriate alternative assessment method in CLIL. It is strongly recommended that the fundamentals for assessment (curricula and language objectives) and a mutual assessment scheme should be determined and stakeholders’ knowledge base of CLIL strengthened. The principles of adequate assessment in primary CLIL are identified as well as several appropriate assessment methods suggested.

Power semiconductor nonlinearities in active du/dt output filtering

This doctoral thesis introduces an improved control principle for active du/dt output filtering in variable-speed AC drives, together with performance comparisons with previous filtering methods. The effects of power semiconductor nonlinearities on the output filtering performance are investigated. The nonlinearities include the timing deviation and the voltage pulse waveform distortion in the variable-speed AC drive output bridge. Active du/dt output filtering (ADUDT) is a method to mitigate motor overvoltages in variable-speed AC drives with long motor cables. It is a quite recent addition to the du/dt reduction methods available. This thesis improves on the existing control method for the filter, and concentrates on the lowvoltage (below 1 kV AC) two-level voltage-source inverter implementation of the method. The ADUDT uses narrow voltage pulses having a duration in the order of a microsecond from an IGBT (insulated gate bipolar transistor) inverter to control the output voltage of a tuned LC filter circuit. The filter output voltage has thus increased slope transition times at the rising and falling edges, with an opportunity of no overshoot. The effect of the longer slope transition times is a reduction in the du/dt of the voltage fed to the motor cable. Lower du/dt values result in a reduction in the overvoltage effects on the motor terminals. Compared with traditional output filtering methods to accomplish this task, the active du/dt filtering provides lower inductance values and a smaller physical size of the filter itself. The filter circuit weight can also be reduced. However, the power semiconductor nonlinearities skew the filter control pulse pattern, resulting in control deviation. This deviation introduces unwanted overshoot and resonance in the filter. The controlmethod proposed in this thesis is able to directly compensate for the dead time-induced zero-current clamping (ZCC) effect in the pulse pattern. It gives more flexibility to the pattern structure, which could help in the timing deviation compensation design. Previous studies have shown that when a motor load current flows in the filter circuit and the inverter, the phase leg blanking times distort the voltage pulse sequence fed to the filter input. These blanking times are caused by excessively large dead time values between the IGBT control pulses. Moreover, the various switching timing distortions, present in realworld electronics when operating with a microsecond timescale, bring additional skew to the control. Left uncompensated, this results in distortion of the filter input voltage and a filter self-induced overvoltage in the form of an overshoot. This overshoot adds to the voltage appearing at the motor terminals, thus increasing the transient voltage amplitude at the motor. This doctoral thesis investigates the magnitude of such timing deviation effects. If the motor load current is left uncompensated in the control, the filter output voltage can overshoot up to double the input voltage amplitude. IGBT nonlinearities were observed to cause a smaller overshoot, in the order of 30%. This thesis introduces an improved ADUDT control method that is able to compensate for phase leg blanking times, giving flexibility to the pulse pattern structure and dead times. The control method is still sensitive to timing deviations, and their effect is investigated. A simple approach of using a fixed delay compensation value was tried in the test setup measurements. The ADUDT method with the new control algorithm was found to work in an actual motor drive application. Judging by the simulation results, with the delay compensation, the method should ultimately enable an output voltage performance and a du/dt reduction that are free from residual overshoot effects. The proposed control algorithm is not strictly required for successful ADUDT operation: It is possible to precalculate the pulse patterns by iteration and then for instance store them into a look-up table inside the control electronics. Rather, the newly developed control method is a mathematical tool for solving the ADUDT control pulses. It does not contain the timing deviation compensation (from the logic-level command to the phase leg output voltage), and as such is not able to remove the timing deviation effects that cause error and overshoot in the filter. When the timing deviation compensation has to be tuned-in in the control pattern, the precalculated iteration method could prove simpler and equally good (or even better) compared with the mathematical solution with a separate timing compensation module. One of the key findings in this thesis is the conclusion that the correctness of the pulse pattern structure, in the sense of ZCC and predicted pulse timings, cannot be separated from the timing deviations. The usefulness of the correctly calculated pattern is reduced by the voltage edge timing errors. The doctoral thesis provides an introductory background chapter on variable-speed AC drives and the problem of motor overvoltages and takes a look at traditional solutions for overvoltage mitigation. Previous results related to the active du/dt filtering are discussed. The basic operation principle and design of the filter have been studied previously. The effect of load current in the filter and the basic idea of compensation have been presented in the past. However, there was no direct way of including the dead time in the control (except for solving the pulse pattern manually by iteration), and the magnitude of nonlinearity effects had not been investigated. The enhanced control principle with the dead time handling capability and a case study of the test setup timing deviations are the main contributions of this doctoral thesis. The simulation and experimental setup results show that the proposed control method can be used in an actual drive. Loss measurements and a comparison of active du/dt output filtering with traditional output filtering methods are also presented in the work. Two different ADUDT filter designs are included, with ferrite core and air core inductors. Other filters included in the tests were a passive du/dtfilter and a passive sine filter. The loss measurements incorporated a silicon carbide diode-equipped IGBT module, and the results show lower losses with these new device technologies. The new control principle was measured in a 43 A load current motor drive system and was able to bring the filter output peak voltage from 980 V (the previous control principle) down to 680 V in a 540 V average DC link voltage variable-speed drive. A 200 m motor cable was used, and the filter losses for the active du/dt methods were 111W–126 W versus 184 W for the passive du/dt. In terms of inverter and filter losses, the active du/dt filtering method had a 1.82-fold increase in losses compared with an all-passive traditional du/dt output filter. The filter mass with the active du/dt method was 17% (2.4 kg, air-core inductors) compared with 14 kg of the passive du/dt method filter. Silicon carbide freewheeling diodes were found to reduce the inverter losses in the active du/dt filtering by 18% compared with the same IGBT module with silicon diodes. For a 200 m cable length, the average peak voltage at the motor terminals was 1050 V with no filter, 960 V for the all-passive du/dt filter, and 700 V for the active du/dt filtering applying the new control principle.