Interventions hybrides et malformations cardiaques congénitales [Hybrid procedures in congenital heart disease]

La complexité croissante de la prise en charge des malformations cardiaques congénitales impose des interventions chirurgicales et des cathétérismes cardiaques interventionnels fréquents. Chacune de ces techniques a ces limitations propres. Les interventions hybrides associent les avantages de la chirurgie cardiaque et du cathétérisme interventionnel. Dans notre expérience, les thérapies hybrides permettent de diminuer le temps de circulation extracorporelle, de diminuer la morbidité des interventions chirurgicales, de raccourcir le séjour du patient aux soins intensifs. Pour certaines malformations cardiaques congénitales complexes pour lesquelles il n'existe pas de chirurgie ou de thérapie interventionnelle idéale, les interventions hybrides sont en train de s'imposer comme la prise en charge incontournable. Increasing complexity in management of congenital heart disease imposes more frequent surgeries and interventions. Each technique has its own limitations, which could impair the anticipated result. Hybrid procedures join the advantages of cardiac surgery and interventions, creating a synergy in the management of these patients with cardiac anomalies. In our experience, hybrid procedures shorten cardiopulmonary bypass, reduce morbidity of surgery and reduce duration of stay in the intensive care unit. For some complex congenital heart diseases for which there are no ideal surgical or interventional options, hybrid procedures are becoming increasingly important in their management. Finally hybrid procedures allow surgeons and cardiologist to achieve complex procedures that could not be possible in another way

Integrating life cycle costs and environmental impacts of composite rail car-bodies for a Korean train

Background, aim, and scope A coupled Life Cycle Costing and life cycle assessment has been performed for car-bodies of the Korean Tilting Train eXpress (TTX) project using European and Korean databases, with the objective of assessing environmental and cost performance to aid materials and process selection. More specifically, the potential of polymer composite car-body structures for the Korean Tilting Train eXpress (TTX) has been investigated. Materials and methods This assessment includes the cost of both carriage manufacturing and use phases, coupled with the life cycle environmental impacts of all stages from raw material production, through carriage manufacture and use, to end-of-life scenarios. Metallic carriages were compared with two composite options: hybrid steel-composite and full-composite carriages. The total planned production for this regional Korean train was 440 cars, with an annual production volume of 80 cars. Results and discussion The coupled analyses were used to generate plots of cost versus energy consumption and environmental impacts. The results show that the raw material and manufacturing phase costs are approximately half of the total life cycle costs, whilst their environmental impact is relatively insignificant (3-8%). The use phase of the car-body has the largest environmental impact for all scenarios, with near negligible contributions from the other phases. Since steel rail carriages weigh more (27-51%), the use phase cost is correspondingly higher, resulting in both the greatest environmental impact and the highest life cycle cost. Compared to the steel scenario, the hybrid composite variant has a lower life cycle cost (16%) and a lower environmental impact (26%). Though the full composite rail carriage may have the highest manufacturing cost, it results in the lowest total life cycle costs and lowest environmental impacts. Conclusions and recommendations This coupled cost and life cycle assessment showed that the full composite variant was the optimum solution. This case study showed that coupling of technical cost models with life cycle assessment offers an efficient route to accurately evaluate economic and environmental performance in a consistent way.

Genetic similarity in a hybrid population of 'Montenegrina' and 'King' mandarins

The objective of this work was to confirm the hybrids obtained in plants originated from the crossing between the mandarins Citrus deliciosa 'Montenegrina' and C. nobilis 'King', and to estimate the genetic similarity among hybrids, and between each hybrid and its parents. Twenty‑three pairs of microsatellite primers were tested. Fourteen of these pairs showed polymorphic bands between parents. Primers CCSM 129 and CCSME 52 were sufficient to identify the 12 nucellar clones observed in the studied population. Genetic similarity analysis of the population (hybrids and parents) showed 0.56 average similarity. Besides the 12 clones of 'Montenegrina' identified, 25 hybrids were found of which D18, C32, D06, C05 and D09 are the more similar to 'Montenegrina'.

Modelling the effect of temperature on height increment of Scots pine at high latitudes

Abstract

Monoclonal antibodies specific for carcinoembryonic antigen and produced by two hybrid cell lines.

Spleen cells from mice immunized with purified carcinoembryonic antigen (CEA), an important tumor marker of human carcinomas, were fused with the mouse myeloma cell line P3-NSI/1-Ag4. Out of the 400 hybrids obtained, 2 secreted antibodies reacting specifically with two different antigenic determinants present on CEA molecules. They were cloned and established as permanent hybridoma cell lines. These antibodies, which have relatively high-affinities and can be produced in unlimited amounts, will be useful both for the immunochemical characterization of CEA and as a standard reagent for the identification of this antigen in human tissues and body fluids.

Modelling of crowded polymers elucidate effects of double-strand breaks in topological domains of bacterial chromosomes.

Using numerical simulations of pairs of long polymeric chains confined in microscopic cylinders, we investigate consequences of double-strand DNA breaks occurring in independent topological domains, such as these constituting bacterial chromosomes. Our simulations show a transition between segregated and mixed state upon linearization of one of the modelled topological domains. Our results explain how chromosomal organization into topological domains can fulfil two opposite conditions: (i) effectively repulse various loops from each other thus promoting chromosome separation and (ii) permit local DNA intermingling when one or more loops are broken and need to be repaired in a process that requires homology search between broken ends and their homologous sequences in closely positioned sister chromatid.

Initial experience with hybrid surgery in congenital heart disease in a single center : P171

Introduction: A hybrid intervention is a joint procedure involving the interventional cardiologist and the cardiac surgeon. At our institution we have opted for this type of approach in congenital heart disease since 2005. We report here our initial experience. Cases: 1. A 3 year old boy with double aortic arch and multiple muscular ventricular septal defects (VSD),was readdressed for pulmonary band (PAB) removal and residual VSD closure after previous palliation. After surgical removal of the PAB, the surgeon provided a minimal transventricular access for placement of a 6mm Amplatzer® muscular VSD occluder by the cardiologist under transoesophageal guidance. The patient was extubated the same day and discharged after 5 days. 2. An 8 year old girl with Williams syndrome was followed for two large VSDs and severe peripheral pulmonary arteries (PA) stenosis. The membranous VSD was closed surgically, the muscular VSD during the same operation by direct placement of a 12 mm Amplatzer® muscular VSD occluder. During rewarming, balloon angioplasty of peripheral PA stenosis was achieved under fluoroscopy. Patient was extubated the following day and discharged after 8 days. 3. A 9 year old boy post tetralogy of Fallot repair had severe distal stenosis of the right ventricular to PA conduit.With patient on partial cardiopulmonary bypass, an incision was made on the conduit and a CP 8 Zig 16 stent placed on the stenosis. The child passed on full bypass and the definitive placement of the stent achieved. The child was extubated at the end of the intervention and discharged after 6 days. 4. A newborn presented at 2 days life with complex aortic arch anatomy: left aortic arch and right descending thoracic aorta perfused directly from a right arterial duct and left PA atresia. The arterial duct was stented with a Genesis XD stent dilated at 7mm. Two days later the cardiac surgeon made banded the right PA. The child was extubated after the operation and discharged a week later. Conclusion: Hybrid approach opens new ways of correction or palliation in congenital heart disease with encouraging results and less morbidity.

Field performance of hybrid aspen clones planted in summer

[Abstract]

A survey on automatic recommenders in the context of institutional repositories

Peer-reviewed

Environmental data mining and modeling based on machine learning algorithms and geostatistics

The paper presents some contemporary approaches to spatial environmental data analysis. The main topics are concentrated on the decision-oriented problems of environmental spatial data mining and modeling: valorization and representativity of data with the help of exploratory data analysis, spatial predictions, probabilistic and risk mapping, development and application of conditional stochastic simulation models. The innovative part of the paper presents integrated/hybrid model-machine learning (ML) residuals sequential simulations-MLRSS. The models are based on multilayer perceptron and support vector regression ML algorithms used for modeling long-range spatial trends and sequential simulations of the residuals. NIL algorithms deliver non-linear solution for the spatial non-stationary problems, which are difficult for geostatistical approach. Geostatistical tools (variography) are used to characterize performance of ML algorithms, by analyzing quality and quantity of the spatially structured information extracted from data with ML algorithms. Sequential simulations provide efficient assessment of uncertainty and spatial variability. Case study from the Chernobyl fallouts illustrates the performance of the proposed model. It is shown that probability mapping, provided by the combination of ML data driven and geostatistical model based approaches, can be efficiently used in decision-making process. (C) 2003 Elsevier Ltd. All rights reserved.

Linear prediction application for modelling the relationships between a large number of stand characteristics of Norway spruce stands

Abstract

Parasitic fauna in hybrid tambacu from fish farms

The objective of this work was to evaluate the parasitic fauna of hybrid tambacu (Colossoma macropomum x Piaractus mesopotamicus) from fish farms and the host-parasite relationship. A hundred and fourteen fish were collected from four fish farms in Macapá, in the state of Amapá, Brazil, 80.7% of which were infected by: Ichthyophthirius multifiliis (Ciliophora); Piscinoodinium pillulare (Dinoflagellida); Anacanthorus spatulatus, Notozothecium janauachensis, and Mymarothecium viatorum (Monogenoidea); Neoechinorhynchus buttnerae (Acanthocephala); Cucullanus colossomi (Nematoda); Perulernaea gamitanae (Lernaeidae); and Proteocephalidae larvae (Cestoda). A total of 8,136,252 parasites were collected from the examined fish. This is the first record of N. buttnerae, C. colossomi, N. janauachensis, M. viatorum, and Proteocephalidae for hybrid tambacu in Brazil. Ichthyophthirius multifiliis was the most prevalent parasite, whereas endohelminths were the less. A positive correlation was observed between number of I. multifiliis and total length and weight of fish, as well as between number of P. gamitanae and total length. The infection by I. multifiliis had association with the parasitism by Monogenoidea. Low water quality contributes to high parasitism of hybrid tambacu by ectoparasites, which, however, does not influence the relative condition factor of fish.

Individual-based modelling and simulation: towards a better understanding of growth dynamics from small inocula

Postprint (published version)

Energy-based modelling and simulation of the interconnection of a back-to-back converter and a doubly-fed induction machine

This paper describes the port interconnection of two subsystems: a power electronics subsystem (a back-to-back AC/CA converter (B2B), coupled to a phase of the power grid), and an electromechanical subsystem (a doubly-fed induction machine (DFIM). The B2B is a variable structure system (VSS), due to presence of control-actuated switches: however, from a modelling simulation, as well as a control-design, point of view, it is sensible to consider modulated transformers (MTF in the bond graph language) instead of the pairs of complementary switches. The port-Hamiltonian models of both subsystems are presented and, using a power-preserving interconnection, the Hamiltonian description of the whole system is obtained; detailed bond graphs of all subsystems and the complete system are also provided. Using passivity-based controllers computed in the Hamiltonian formalism for both subsystems, the whole model is simulated; simulations are run to rest the correctness and efficiency of the Hamiltonian network modelling approach used in this work.