Risk Perception Influences Athletic Pacing Strategy.

PURPOSE: To examine risk-taking and risk-perception associations with perceived exertion, pacing and performance in athletes. METHODS: Two experiments were conducted in which risk-perception was assessed using the domain-specific risk-taking (DOSPERT) scale in 20 novice cyclists (Experiment 1) and 32 experienced ultra-marathon runners (Experiment 2). In Experiment 1, participants predicted their pace and then performed a 5 km maximum effort cycling time-trial on a calibrated KingCycle mounted bicycle. Split-times and perceived exertion were recorded every kilometer. In experiment 2, each participant predicted their split times before running a 100 km ultra-marathon. Split-times and perceived exertion were recorded at 7 check-points. In both experiments, higher and lower risk-perception groups were created using median split of DOSPERT scores. RESULTS: In experiment 1, pace during the first km was faster among lower compared to higher risk-perceivers, t(18)=2.0 P=0.03, and faster among higher compared lower risk-takers, t(18)=2.2 P=0.02. Actual pace was slower than predicted pace during the first km in both the higher risk perceivers, t(9)=-4.2 P=0.001, and lower risk-perceivers, t(9)=-1.8 P=0.049. In experiment 2, pace during the first 36 km was faster among lower compared to higher risk-perceivers, t(16)=2.0 P=0.03. Irrespective of risk-perception group, actual pace was slower than predicted pace during the first 18 km, t(16)=8.9 P<0.001, and from 18 to 36 km, t(16)=4.0 P<0.001. In both experiments there was no difference in performance between higher and lower risk-perception groups. CONCLUSIONS: Initial pace is associated with an individual's perception of risk, with low perceptions of risk being associated with a faster starting pace. Large differences between predicted and actual pace suggests the performance template lacks accuracy, perhaps indicating greater reliance on momentary pacing decisions rather than pre-planned strategy.

Position-specific Performance Indicators that Discriminate between Successful and Unsuccessful Teams in Elite Women’s Indoor Field Hockey: Implications for Coaching

The aim of this investigation was to establish median performance profiles for the six playing positions in elite women’s indoor hockey and then identify whether these position-specific profiles could discriminate between qualifying (top four), mid-table and relegated teams in the 2011-12 England Hockey premier league. Successful passing in relegated teams was significantly lower (p<0.008) than in mid-table and qualifying teams in four of the five outfield positions. Furthermore, the right backs of qualifying teams demonstrated significantly fewer (p<0.008) unsuccessful passes (x̃=15.5 ±CLs 15.0 and 10.0 respectively) and interceptions (x̃=4.0 ±CLs 4.0 and 3.0 respectively) than relegated teams (x̃=19.5 ±CLs 21.0 and 17.0; x̃=7.5 ±CLs 8.0 and 6.0 respectively). Finally, the right forwards of relegated teams demonstrated significantly fewer (p<0.008) successful interceptions (x̃=4.0 ±CLs 5.0 and 4.0 respectively) than qualifying teams (x̃=5.0 ±CLs 6.0 and 3.0 respectively) and significantly more (p<0.008) unsuccessful interceptions (x̃=5.5 ±CLs 6.0 and 4.0 respectively) than mid-table teams (x̃=3.0 ±CLs 3.0 and 2.0 respectively). Based on these findings, coaches should adapt tactical strategies and personnel deployment accordingly to enhance the likelihood of preparing a qualifying team. Research should build from these data to examine dribbling, pressing and patterns of play when outletting.

A new bulk-driven input stage design for sub 1-volt CMOS op-amps

This paper presents a new design approach for a rail-to-rail bulk-driven input stage using a standard single-well (n-well in this paper) CMOS technology. This input stage can provide nearly constant transconductance and constant slew rate over the entire input common-mode voltage, operating with a wide supply voltage ranging from sub 1-volt (V/sub T0/+ 3V/sub DSsat/) to the maximum allowed for the CMOS process, as well as preventing latch-up.

Sociological Knowledge and Transformation at ‘Diversity University’, UK

This chapter is based on a case study of one UK university sociology department and shows how sociology knowledge can transform the lives of ‘non-traditional’ students. The research from which the case is drawn focused on four departments teaching sociology-related subjects in universities positioned differently in UK league tables. It explored the question of the relationship between university reputation, pedagogic quality and curriculum knowledge, challenging taken-for-granted judgements about ‘quality’ and in conceptualising ‘just’ university pedagogy by taking Basil Bernstein’s ideas about how ‘powerful’ knowledge is distributed in society to illuminate pedagogy and curriculum. The project took the view that ‘power’ lies in the acquisition of specific (inter)disciplinary knowledges which allows the formation of disciplinary identities by way of developing the means to think about and act in the world in specific ways. We chose to focus on sociology because (1) university sociology is taken up by all socio-economic classes in the UK and is increasingly taught in courses in which the discipline is applied to practice; (2) it is a discipline that historically pursues social and moral ambition which assists exploration of the contribution of pedagogic quality to individuals and society beyond economic goals; (3) the researchers teach and research sociology or sociology of education - an understanding of the subjects under discussion is essential to make judgements about quality. ‘Diversity’ was one of four case study universities. It ranks low in university league tables; is located in a large, multi-cultural English inner city; and, its students are likely to come from lower socio-economic and/or ethnic minority groups, as well as being the first in their families to attend university. To make a case for transformative teaching at Diversity, the chapter draws on longitudinal interviews with students, interviews with tutors, curriculum documents, recordings of teaching, examples of student work, and a survey. It establishes what we can learn from the case of sociology at Diversity, arguing that equality, quality and transformation for individuals and society are served by a university curriculum which is research led and challenging combined with pedagogical practices which give access to difficult-to-acquire and powerful knowledge.

Deregulated expression of selected histone methylases and demethylases in prostate carcinoma

Prostate cancer (PCa), a leading cause of cancer-related morbidity and mortality, arises through the acquisition of genetic and epigenetic alterations. Deregulation of histone methyltransferases (HMTs) or demethylases (HDMs) has been associated with PCa development and progression. However, the precise influence of altered HMTs or HDMs expression and respective histone marks in PCa onset and progression remains largely unknown. To clarify the role of HMTs and HDMs in prostate carcinogenesis, expression levels of 37 HMTs and 20 HDMs were assessed in normal prostate and PCa tissue samples by RT-qPCR. SMYD3, SUV39H2, PRMT6, KDM5A, and KDM6A were upregulated, whereas KMT2A-E (MLL1-5) and KDM4B were downregulated in PCa, compared with normal prostate tissues. Remarkably, PRMT6 was the histone modifier that best discriminated normal from tumorous tissue samples. Interestingly, EZH2 and SMYD3 expression levels significantly correlated with less differentiated and more aggressive tumors. Remarkably, SMYD3 expression levels were of independent prognostic value for the prediction of disease-specific survival of PCa patients with clinically localized disease submitted to radical prostatectomy. We concluded that expression profiling of HMTs and HDMs, especially SMYD3, might be of clinical usefulness for the assessment of PCa patients and assist in pre-therapeutic decision-making.

Preemption delay analysis for floating non-preemptive region scheduling

In real-time systems, there are two distinct trends for scheduling task sets on unicore systems: non-preemptive and preemptive scheduling. Non-preemptive scheduling is obviously not subject to any preemption delay but its schedulability may be quite poor, whereas fully preemptive scheduling is subject to preemption delay, but benefits from a higher flexibility in the scheduling decisions. The time-delay involved by task preemptions is a major source of pessimism in the analysis of the task Worst-Case Execution Time (WCET) in real-time systems. Preemptive scheduling policies including non-preemptive regions are a hybrid solution between non-preemptive and fully preemptive scheduling paradigms, which enables to conjugate both world's benefits. In this paper, we exploit the connection between the progression of a task in its operations, and the knowledge of the preemption delays as a function of its progression. The pessimism in the preemption delay estimation is then reduced in comparison to state of the art methods, due to the increase in information available in the analysis.

Scheduling sporadic tasks on multiprocessors with mutual exclusion constraints

Consider the problem of scheduling sporadic tasks on a multiprocessor platform under mutual exclusion constraints. We present an approach which appears promising for allowing large amounts of parallel task executions and still ensures low amounts of blocking.

Shared resources and precedence constraints with capacity sharing and stealing

This paper proposes a new strategy to integrate shared resources and precedence constraints among real-time tasks, assuming no precise information on critical sections and computation times is available. The concept of bandwidth inheritance is combined with a greedy capacity sharing and stealing policy to efficiently exchange bandwidth among tasks, minimising the degree of deviation from the ideal system's behaviour caused by inter-application blocking. The proposed capacity exchange protocol (CXP) focus on exchanging extra capacities as early, and not necessarily as fairly, as possible. This loss of optimality is worth the reduced complexity as the protocol's behaviour nevertheless tends to be fair in the long run and outperforms other solutions in highly dynamic scenarios, as demonstrated by extensive simulations.

RFID-based wireless passive sensors utilizing cork materials

This paper presents the design of low-cost, conformal UHF antennas and RFID tags on two types of cork substrates: 1) natural cork and 2) agglomerate cork. Such RFID tags find an application in wine bottle and barrel identification, and in addition, they are suitable for numerous antenna-based sensing applications. This paper includes the high-frequency characterization of the selected cork substrates considering the anisotropic behavior of such materials. In addition, the variation of their permittivity values as a function of the humidity is also verified. As a proof-of-concept demonstration, three conformal RFID tags have been implemented on cork, and their performance has been evaluated using both a commercial Alien ALR8800 reader and an in-house measurement setup. The reading of all tags has been checked, and a satisfactory performance has been verified, with reading ranges spanning from 0.3 to 6 m. In addition, this paper discusses how inkjet printing can be applied to cork surfaces, and an RFID tag printed on cork is used as a humidity sensor. Its performance is tested under different humidity conditions, and a good range in excess of 3 m has been achieved, allied to a good sensitivity obtained with a shift of >5 dB in threshold power of the tag for different humid conditions.

Conceptualização de um evento à luz do brand entertainment e ativação de marcas

Trabalho de projeto apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Publicidade e Marketing.

A lenda de Apolo e Mársias : Representações artísticas e estudos de anatomia de superfície

Acta Medica Portuguesa 2005; 18: 371-376

Cross-Layer Admission Control to Enhance the Support of Real-Time Applications in WSN

Real-time monitoring applications may be used in a wireless sensor network (WSN) and may generate packet flows with strict quality of service requirements in terms of delay, jitter, or packet loss. When strict delays are imposed from source to destination, the packets must be delivered at the destination within an end-to-end delay (EED) hard limit in order to be considered useful. Since the WSN nodes are scarce both in processing and energy resources, it is desirable that they only transport useful data, as this contributes to enhance the overall network performance and to improve energy efficiency. In this paper, we propose a novel cross-layer admission control (CLAC) mechanism to enhance the network performance and increase energy efficiency of a WSN, by avoiding the transmission of potentially useless packets. The CLAC mechanism uses an estimation technique to preview packets EED, and decides to forward a packet only if it is expected to meet the EED deadline defined by the application, dropping it otherwise. The results obtained show that CLAC enhances the network performance by increasing the useful packet delivery ratio in high network loads and improves the energy efficiency in every network load.

A Casa de Atouguia, os Últimos Avis e o Império. Dinâmicas entrecruzadas na carreira de D. Luís de Ataíde (1516-1581)

Tese apresentada para cumprimento dos requisitos necessários à obtenção do grau de Doutor em História

A mathematical model to describe fat oxidation kinetics during graded exercise.

PURPOSE: The purpose of this study was to develop a mathematical model (sine model, SIN) to describe fat oxidation kinetics as a function of the relative exercise intensity [% of maximal oxygen uptake (%VO2max)] during graded exercise and to determine the exercise intensity (Fatmax) that elicits maximal fat oxidation (MFO) and the intensity at which the fat oxidation becomes negligible (Fatmin). This model included three independent variables (dilatation, symmetry, and translation) that incorporated primary expected modulations of the curve because of training level or body composition. METHODS: Thirty-two healthy volunteers (17 women and 15 men) performed a graded exercise test on a cycle ergometer, with 3-min stages and 20-W increments. Substrate oxidation rates were determined using indirect calorimetry. SIN was compared with measured values (MV) and with other methods currently used [i.e., the RER method (MRER) and third polynomial curves (P3)]. RESULTS: There was no significant difference in the fitting accuracy between SIN and P3 (P = 0.157), whereas MRER was less precise than SIN (P < 0.001). Fatmax (44 +/- 10% VO2max) and MFO (0.37 +/- 0.16 g x min(-1)) determined using SIN were significantly correlated with MV, P3, and MRER (P < 0.001). The variable of dilatation was correlated with Fatmax, Fatmin, and MFO (r = 0.79, r = 0.67, and r = 0.60, respectively, P < 0.001). CONCLUSIONS: The SIN model presents the same precision as other methods currently used in the determination of Fatmax and MFO but in addition allows calculation of Fatmin. Moreover, the three independent variables are directly related to the main expected modulations of the fat oxidation curve. SIN, therefore, seems to be an appropriate tool in analyzing fat oxidation kinetics obtained during graded exercise.