Internationalization of Papo D’anjo to Mexico

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Incidence of anti-toxoplasma antibodies in women with high-risk pregnancy and habitual abortions

Toxoplasmosis is a zoonosis caused by Toxoplasma gondii, an obligate intracellular parasite. In pregnant women on the worldwide scale, there are seroprevalences from 7% to 51.3% and in women with abnormal pregnancies and abortions the seroprevalences vary from 17.5% to 52.3%. In Mexico, seropositivity has been found to vary from 18.2% to 44.8% in women with abnormal deliveries or abortions. This study's aim was to determine the incidence oflgG and IgM anti-Toxoplasma antibodies in women at the Gineco-Obstetrics Hospital of the Western Medical Center of the Mexican Social Security Institute. Three hundred and fifty women with high-risk pregnancies were studied, and 122 (34.9%) were found to be IgG seropositive and 76 (20.7%) were IgM positive. In one group of women with habitual abortions there were 48 (44.9%) with the preseiwe of IgG antibodies and 33 (33-3%) were IgM seropositive. Seropositivity was analyzed according to age, occupation, socio-economic level, eating raw or poorly cooked meat, and living with cats.

WebGIS applied to Improve Spatial Knowledge of High School Students

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies

Spectroscopic characterization of natural dyes by their non-invasive identification on pre-Columbian codices: the Maya yellow

Mesoamerican cultures had a strong tradition of written and pictorial manuscripts, called the codices. In studies already performed it was found the use of Maya Blue, made from a mixture of indigo and a clay called palygorskite, forming an incredibly stable material where the dye is trapped inside the nanotubes of the clay, after heating. However, a bigger challenge lies in the study of the yellows used, for these civilizations might have used this clay-dye mixture to produce their yellow colorants. As a first step, it was possible to provide identification, by non-invasive methods, of two colorants (a flavonoid and a carotenoid). While the flavonoid absorbed between 368-379 nm, the carotenoid would absorb around 455 nm. A temperature study also conducted allowed to set 140ºC as the desirable temperature to heat the samples without degrading them. FT-IR, conventional Raman and SERS allowed us to understand the existence of a reaction between the dyes and the clays (palygorskite and kaolinite), however it is difficult to understand it in a molecular point of view. As a second step, five species of Mexican dyes were selected on the basis of historical sources. The Maya yellow samples were produced adapting the recipe proposed by Reyes-Valerio, supporting the yellow dyes extracted from the dried plants on the clays, with addition of water, and then heated at 140ºC. It was found that the addition of water in palygorskite would increase the pH, hence deprotonating the molecules having a clear negative effect in the color. A second recipe was developed, without the addition of water; however, it was found that the use of water based binders would still alter the color of the samples with palygorskite. In this case, kaolinite without heating yield better results as a Maya yellow hybrid. It was found that the Maya chemistry might not have been the same for all the colors. The Mesoamericans might have found that different dyes could work better to their desires if matched with different clays. It was noticeable that for a clear distinction between flavonoids and carotenoids the reflectance and emission studies suffice, but when clay is added, Raman techniques will perform better. For this reason, conventional Raman and SERS were employed in order to create a database for the Mesoamerican dyestuffs for a future identification.

WebGIS applied to improve spatial knowledge of high school students

This research seeks to design and implement a WebGIS application allowing high school students to work with information related to the disciplinary competencies of the competency-teaching model, in Mexico. This paradigm assumes knowledge to be acquired through the application of new technologies and to link it with everyday life situations of students. The WebGIS provides access to maps regarding natural risks in Mexico, e.g. volcanism, seismic activities, or hurricanes; the prototype's user interface was designed with special emphasis on scholar needs for high school students.

Welle tecnologia laser internationalization analysis US market

Welle Laser is a Brazilian company that manufactures marking and engraving machines mainly for large-scale industry segments providing solutions that help increase productivity. Welle laser has 60% market share in Brazil and decided to go internationally in 2015, mainly to increase revenues and diversify business risks. Welle opened an office in Switzerland and celebrated a contract with a Mexican company to distribute their machines in Mexico. The next step for Welle is expanding its operation to USA. In my project I accessed the viability and reasons to enter the US market, the region where Welle should start its operation, and the best entry mode strategy.

A utilização das TIC em contexto de ensino - aprendizagem: potencialidades da Internet na promoção da expressão escrita

Relatório de estágio de mestrado em Ensino de Português no 3º Ciclo do Ensino Básico e no Ensino Secundário e de Espanhol nos Ensinos Básico e Secundário

Effect of chitosan-Aloe vera coating on postharvest quality of blueberry (Vaccinium corymbosum) fruit

The present study was carried out to evaluate the effect of chitosan-based edible coatings with Aloe vera extract on the postharvest blueberry fruit quality during storage at 5 °C. Firstly, A. vera fractions (pulp and liquid) were extracted from leaves and evaluated in terms of antifungal and antioxidant capacities. The choice of the most adequate chitosan and A. vera fraction concentrations to be incorporated in coating formulation was made based on the wettability of the corresponding coating solutions. Coatings with 0.5% (w/v) chitosan + 0.5% (w/v) glycerol + 0.1% (w/v) Tween 80 + 0.5% (v/v) A. vera liquid fraction presented the best characteristics to uniformly coat blueberry surface. Physico-chemical (i.e., titratable acidity, pH, weight loss) and microbiological analyses of coated blueberries (non-inoculated or artificially inoculated with Botrytis cinerea) were performed during 25 d. Microbiological growth and water loss levels were approximately reduced by 50% and 42%, respectively, in coated blueberries after 25 d compared to uncoated blueberries. After 15 d, weight loss values were 6.2% and 3.7% for uncoated and chitosanA. vera coated blueberries, respectively. Uncoated fruits presented mold contamination after 2 d of storage (2.0 ± 0.32 log CFU g1), whilst fruits with chitosan-based coatings with A. vera presented mold contamination only after 9 d of storage (1.3 ± 0.35 log CFU g1). Overall, coatings developed in this study extend blueberries shelf-life for about 5 d, demonstrating for the first time that the combination of chitosan and A. vera liquid fraction as edible coating materials has great potential in expanding the shelf-life of fruits.

Layer-by-layer technique to developing functional nanolaminate films with antifungal activity

The layer-by-layer (LbL) deposition method was used to build up alternating layers (five) of different polyelectrolyte solutions (alginate, zein-carvacrol nanocapsules, chitosan and chitosan-carvacrol emulsions) on an aminolysed/charged polyethylene terephthalate (A/C PET) film. These nanolaminated films were characterised by contact angle measurements and through the determination of water vapour (WVTR) and oxygen (O2TR) transmission rates. The effect of active nanolaminated films against the Alternaria sp. and Rhizopus stolonifer was also evaluated. This procedure allowed developing optically transparent nanolaminated films with tuneable water vapour and gas properties and antifungal activity. The water and oxygen transmission rate values for the multilayer films were lower than those previously reported for the neat alginate or chitosan films. The presence of carvacrol and zein nanocapsules significantly decreased the water transmission rate (up to 40 %) of the nanolaminated films. However, the O2TR behaved differently and was only improved (up to 45 %) when carvacrol was encapsulated, i.e. nanolaminated films prepared by alternating alginate with nanocapsules of zein-carvacrol layers showed better oxygen barrier properties than those prepared as an emulsion of chitosan and carvacrol. These films containing zein-carvacrol nanocapsules also showed the highest antifungal activity (30 %), which did not significantly differ from those obtained with the highest amount of carvacrol, probably due to the controlled release of the active agent (carvacrol) from the zein-carvacrol nanocapsules. Thus, this work shows that nanolaminated films prepared with alternating layers of alginate and zein-carvacrol nanocapsules can be considered to improve the shelf-life of foodstuffs.

Microbial production of potent phenolic-antioxidants through solid state fermentation

The agroindustrial residues including plant tissues rich in polyphenols were explored for microbial production of potent phenolics under solid state fermentation processes. The fungal strains capable of hydrolyzing tannin-rich materials were isolated from Mexican semidesert zones. These microorganisms have been employed to release potent phenolic antioxidants during the solid state fermentation of different materials (pomegranate peels, pecan nut shells, creosote bush and tar bush). This chapter includes the critical parameters for antioxidants production from selective microbes. Technical aspects of the microbial fermentation of antioxidants have also been discussed.

A estruturação metafórica na concetualização de "Hora" na poesia de Fernando Pessoa ortónimo

Dissertação de mestrado em Ciências da Linguagem

spatiotemporal profile of visual attention

Visual attention, focus of attention, mexican hat profile, surround inhibition

Estudos genéticos sôbre o milho tunicata

The study of pod corn seems still of much importance from different points of view. The phylogenetical importance of the tunicate factor as a wild type relic gene has been recently discussed in much detail by MANGELSDORF and REEVES (1939), and by BRIEGER (1943, 1944a e b). Selection experiments have shown that the pleiotropic effect of the Tu factor can be modified very extensively (BRIEGER 1944a) and some of the forms thus obtained permitt comparison of male and female inflorescences in corn and related grasses. A detailed discussion of the botanical aspect shall be given shortly. The genetic apect, finally, is the subject of the present publication. Pod corn has been obtained twice: São Paulo Pod Corn and Bolivia Pod Corn. The former came from one half ear left in our laboratory by a student and belongs to the type of corn cultivated in the State of São Paulo, while the other belongs to the Andean group, and has been received both through Dr. CARDENAS, President of the University at Cochabamba, Bolivia, and through Dr. H. C. CUTLER, Harvard University, who collected material in the Andes. The results of the studies may be summarized as follows: 1) In both cases, pod corn is characterized by the presence of a dominant Tu factor, localized in the fourth chromosome and linked with sul. The crossover value differs somewhat from the mean value of 29% given by EMERSON, BEADLE and FRAZER (1935) and was 25% in 1217 plants for São Paulo Pod Corn and 36,5% in 345 plants for Bolivia Pod Corn. However not much importance should be attributed to the quantitative differences. 2) Segregation was completely normal in Bolivia Pod Corn while São Paulo Pod Corn proved to be heterozygous for a new com uma eliminação forte, funcionam apenas 8% em vez de 50%. Existem cerca de 30% de "jcrossing-over entre o gen doce (Su/su) e o fator gametofítico; è cerca de 5% entre o gen Tu e o fator gametofítico. A ordem dos gens no cromosômio IV é: Ga4 - Tu - Sul. 3) Using BRIEGER'S formulas (1930, 1937a, 1937b) the following determinations were made. a) the elimination of ga4 pollen tubes may be strong or weak. In the former case only about 8% and in the latter 37% of ga4 pollen tubes function, instead of the 50% expected in normal heterozygotes. b) There is about 30,4% crossing-over between sul and ga4 and 5,3% between Tu and ga3, the order of the factors beeing Su 1 - Tu - Ga4. 4) The new gametophyte factor differs from the two others factors in the same chromosome, causing competition between pollen tubes. The factor Gal, ocupies another locus, considerably to the left of Sul (EMERSON, BEADLE AND FRAZSER, 1935). The gen spl ocupies another locus and causes a difference of the size of the pollen grains, besides an elimination of pollen tubes, while no such differences were observed in the case of the new factor Ga4. 5) It may be mentioned, without entering into a detailed discussion, that it seems remarquable that three of the few gametophyte factors, so far studied in detail are localized in chromosome four. Actuality there are a few more known (BRIEGER, TIDBURY AND TSENG 1938), but only one other has been localized so far, Ga2, in chromosome five between btl and prl. (BRIEGER, 1935). 6) The fourth chromosome of corn seems to contain other pecularities still. MANGELSDORF AND REEVES (1939) concluded that it carries two translocations from Tripsacum chromosomes, and BRIEGER (1944b) suggested that the tu allel may have been introduced from a tripsacoid ancestor in substitution of the wild type gene Tu at the beginning of domestication. Serious disturbances in the segregation of fourth chromosome factors have been observed (BRIEGER, unpublished) in the hybrids of Brazilian corn and Mexican teosinte, caused by gametophytic and possibly zygotic elimination. Future studies must show wether there is any relation between the frequency of factors, causing gametophyte elimination and the presence of regions of chromosomes, tranfered either from Tripsacum or a related species, by translocation or crossing-over.

Material flow accounting of Mexico (1970-2003)

This technical background paper describes the methods applied and data sources used in the compilation of the 1980-2003 data set for material flow accounts of the Mexican economy and presents the data set. It is organised in four parts: the first part gives an overview of the Material Flow Accounting (MFA) methodology. The second part presents the main material flows of the Mexican economy including biomass, fossil fuels, metal ores, industrial minerals and, construction minerals. The aim of this part is to explain the procedures and methods followed, the data sources used as well as providing a brief evaluation of the quality and reliability of the information used and the accounts established. Finally, some conclusions will be provided.

The biophysical perspective of a middle income economy: material flows in Mexico

We analyse natural resource use dynamics in the Mexican economy during the last three decades. Despite low and uneven economic growth, the extraction and use of materials in the Mexican economy has continuously increased during the last 30 years. In this period, population growth rather than economic growth was the main driving force for biophysical growth. In addition, fundamental changes have taken place in the primary sectors, in manufacturing, and in household consumption and these are reflected in an increasing emphasis on the use of fossil fuels and construction materials. Mexico’s economy has been strongly influenced by international trade since the country commenced competing in international markets. In the 1970s, Mexico mainly exported primary resources. This pattern has changed and manufactured goods now have a much greater importance due to a boom in assembling industries. In contrast with other Latin American countries, Mexico has achieved a diversification of production, moving towards technology-intensive products and a better mix in its export portfolio. However, crude oil exports still represent the single most important export good. Mexico’s material consumption is still well below the OECD average but is growing fast and the current resource use patterns may well present serious social and environmental problems to the medium and long term sustainability of Mexico’s economy and community. Information on natural resource use and resource productivity could provide valuable guidance for economic policy planning in Mexico.