Effect of meal ingestion on liver stiffness in patients with cirrhosis and portal hypertension.

BACKGROUND AND AIMS: Liver stiffness is increasingly used in the non-invasive evaluation of chronic liver diseases. Liver stiffness correlates with hepatic venous pressure gradient (HVPG) in patients with cirrhosis and holds prognostic value in this population. Hence, accuracy in its measurement is needed. Several factors independent of fibrosis influence liver stiffness, but there is insufficient information on whether meal ingestion modifies liver stiffness in cirrhosis. We investigated the changes in liver stiffness occurring after the ingestion of a liquid standard test meal in this population. METHODS: In 19 patients with cirrhosis and esophageal varices (9 alcoholic, 9 HCV-related, 1 NASH; Child score 6.9±1.8), liver stiffness (transient elastography), portal blood flow (PBF) and hepatic artery blood flow (HABF) (Doppler-Ultrasound) were measured before and 30 minutes after receiving a standard mixed liquid meal. In 10 the HVPG changes were also measured. RESULTS: Post-prandial hyperemia was accompanied by a marked increase in liver stiffness (+27±33%; p<0.0001). Changes in liver stiffness did not correlate with PBF changes, but directly correlated with HABF changes (r = 0.658; p = 0.002). After the meal, those patients showing a decrease in HABF (n = 13) had a less marked increase of liver stiffness as compared to patients in whom HABF increased (n = 6; +12±21% vs. +62±29%,p<0.0001). As expected, post-prandial hyperemia was associated with an increase in HVPG (n = 10; +26±13%, p = 0.003), but changes in liver stiffness did not correlate with HVPG changes. CONCLUSIONS: Liver stiffness increases markedly after a liquid test meal in patients with cirrhosis, suggesting that its measurement should be performed in standardized fasting conditions. The hepatic artery buffer response appears an important factor modulating postprandial changes of liver stiffness. The post-prandial increase in HVPG cannot be predicted by changes in liver stiffness.

Uma célula eletroquímica de fluxo para modificação permanente de tubo de grafite empregado em absorção atômica

A flow cell assembled on the original geometry of a graphite tube to achieve permanent chemical modifier is proposed. The graphite tube operates as the working electrode. A stainless steel tube, positioned downstream from the working electrode, was used as the auxiliary electrode. The potential value applied on the graphite electrode was measured against a micro reference electrode (Ag/AgCl) inserted into the auxiliary electrode. Palladium solutions in acetate buffer (100 mmol L-1, pH = 4.8), flowing at 0.5 mL min-1 for 60 min was used to perform the electrochemical modification. A mercury solution (1 ng) was used to evaluate the performance of the permanent palladium modifier.

Banks, Lies and Bricks: The Determinants of Home Value Inflation in Spain during the Housing Boom

During the first decade of this century, Spain experienced the most important economic and housing boom in its recent history. This situation led the lending industry to dramatically expand through the mortgage market. The high competition among lenders caused a dramatic lowering of credit standards. During this period, lenders operating in the Spanish mortgage market artificially inflated appraised home values in order to draw larger mortgages. By doing this, lenders gave financially constrained households access to mortgage credit. In this paper, we analyze this phenomenon for this first time. To do so, we resort to a unique dataset of matched mortgage-dwelling-borrower characteristics covering the period 2004–2010. Our data allow us to construct an unbiased measure of property’s over-appraisal, since transaction prices in our data also includes any potential side payment in the transactions. Our findings indicate that i) in Spain, appraised home values were inflated on average by around 30% with respect to transaction prices; ii) creditconstrained households were more likely to be involved in mortgages with inflated house values; and iii) a regional indicator of competition in the lending market suggests that inflated appraisal values were also more likely to appear in more competitive regional mortgage markets. Keywords: Housing demand, appraisal values, house prices, housing bubble, credit constraints, mortgage market. JEL Classification: R21, R31

Parallel characterizations of a generalized shapley value and a generalized banzhaf value for cooperative games with level structure of cooperation

We present parallel characterizations of two different values in the framework of restricted cooperation games. The restrictions are introduced as a finite sequence of partitions defined on the player set, each of them being coarser than the previous one, hence forming a structure of different levels of a priori unions. On the one hand, we consider a value first introduced in Ref. [18], which extends the Shapley value to games with different levels of a priori unions. On the other hand, we introduce another solution for the same type of games, which extends the Banzhaf value in the same manner. We characterize these two values using logically comparable properties.

Bioenergiaa ja ravinteita kasvi- ja eläinperäisistä sivuainevirroista Parikkalassa

Euroopan unionissa pyritään lisäämään uusiutuvien energialähteiden käyttöä. Tämän työn tavoitteena oli selvittää Parikkalan kunnan alueella muodostuvat biomassat sekä tutkia niiden hyötykäyttömahdollisuuksia sähkön, lämmön sekä lannoitteiden tuotannossa. Käsiteltäviä biomassoja ovat eläintilojen lietteet ja lannat, biojätteet ja yhdyskuntalietteet, vesistöjen kunnostuksessa syntyvät biomassat sekä peltobiomassat ja metsäbiomassa. Mädätyksen kannalta olennaisinta on materiaalien kosteus ja haihtuvan orgaanisen aineksen pitoisuus sekä siitä saatava biokaasumäärä. Poltossa polttoaineen kuiva-aineen lämpöarvo ja kosteus määrittelevät saadun hyödyn. Kompostoinnissa on tärkeää huolehtia riittävästä ilman saannista ja riittävästä viipymäajasta. Hyödynnettäessä biokaasua sähkön ja lämmön yhteistuotannossa on tärkeää löytää hyötykäyttö myös muodostuvalle lämmölle. Poltosta saatavan tuhkan hyötykäyttö onnistuu metsälannoitteena, kun poltetaan turvetta tai puuta. Kompostia voidaan hyödyntää maanparannusaineena. Parikkalan alueella tarkasteltiin biomassojen nykyistä ja mahdollista tulevaa hyötykäyttöä. Tarkastelu tehtiin skenaarioiden avulla. Skenaarioihin kuuluvat mädätyksen ja polton maksimipotentiaalit sekä keskitetyn ja hajautetun käsittelyn skenaariot. Alueelta on saatavissa paljon biomassoja, joista massaltaan suurin on eläintilojen lannat. Alueella on hankaluutena löytää sopiva kulutuskohde biokaasusta tuotetulle lämmölle, mutta sopivana kohteena voisi toimia alueella oleva suuri sikala tai lämpökeskukset.

Kalman Filtering in Online Paper Quality Assessment

Controlling the quality variables (such as basis weight, moisture etc.) is a vital part of making top quality paper or board. In this thesis, an advanced data assimilation tool is applied to the quality control system (QCS) of a paper or board machine. The functionality of the QCS is based on quality observations that are measured with a traversing scanner making a zigzag path. The basic idea is the following: The measured quality variable has to be separated into its machine direction (MD) and cross direction (CD) variations due to the fact that the QCS works separately in MD and CD. Traditionally this is done simply by assuming one scan of the zigzag path to be the CD profile and its mean value to be one point of the MD trend. In this thesis, a more advanced method is introduced. The fundamental idea is to use the signals’ frequency components to represent the variation in both CD and MD. To be able to get to the frequency domain, the Fourier transform is utilized. The frequency domain, that is, the Fourier components are then used as a state vector in a Kalman filter. The Kalman filter is a widely used data assimilation tool to combine noisy observations with a model. The observations here refer to the quality measurements and the model to the Fourier frequency components. By implementing the two dimensional Fourier transform into the Kalman filter, we get an advanced tool for the separation of CD and MD components in total variation or, to be more general, for data assimilation. A piece of a paper roll is analyzed and this tool is applied to model the dataset. As a result, it is clear that the Kalman filter algorithm is able to reconstruct the main features of the dataset from a zigzag path. Although the results are made with a very short sample of paper roll, it seems that this method has great potential to be used later on as a part of the quality control system.

A comparative study of difficulties in accounting preparation and judgement in agriculture using fair value and historical cost accounting for biological assets valuation

This paper presents empirical research comparing the accounting difficulties that arise from the use of two valuation methods for biological assets, fair value (FV) and historical cost (HC) accounting, in the agricultural sector. It also compares how reliable each valuation method is in the decision-making process of agents within the sector. By conducting an experiment with students, farmers, and accountants operating in the agricultural sector, we find that they have more difficulties, make larger miscalculations and make poorer judgements with HC accounting than with FV accounting. In-depth interviews uncover flawed accounting practices in the agricultural sector in Spain in order to meet HC accounting requirements. Given the complexities of cost calculation for biological assets and the predominance of small family business units in advanced Western countries, the study concludes that accounting can be more easily applied in the agricultural sector under FV than HC accounting, and that HC conveys a less accurate grasp of the real situation of a farm.

A convenient method for the determination of moisture in aromatic plants

A method is proposed for the determination of the moisture content of aromatic plants. This method is based on the co-distillation of the starting material in a modified Clevenger apparatus with four organic solvents (toluene, cyclohexane, dichloromethane and carbon tetrachloride). The results were compared with those obtained by oven drying at 105 ºC and steam distillation of the essential oil. The efficiencies of the methods were shown to be equivalent. The solvent distillation method was more practical, especially with respect to operating time (2 h).

Does soil moisture overrule temperature dependence of soil respiration in Mediterranean riparian forests?

Soil respiration (SR) is a major component of ecosystems' carbon cycles and represents the second largest CO2 flux in the terrestrial biosphere. Soil temperature is considered to be the primary abiotic control on SR, whereas soil moisture is the secondary control factor. However, soil moisture can become the dominant control on SR in very wet or dry conditions. Determining the trigger that makes soil moisture as the primary control factor of SR will provide a deeper understanding on how SR changes under the projected future increase in droughts. Specific objectives of this study were (1) to investigate the seasonal variations and the relationship between SR and both soil temperature and moisture in a Mediterranean riparian forest along a groundwater level gradient; (2) to determine soil moisture thresholds at which SR is controlled by soil moisture rather than by temperature; (3) to compare SR responses under different tree species present in a Mediterranean riparian forest (Alnus glutinosa, Populus nigra and Fraxinus excelsior). Results showed that the heterotrophic soil respiration rate, groundwater level and 30 cm integral soil moisture (SM30) decreased significantly from the riverside moving uphill and showed a pronounced seasonality. SR rates showed significant differences between tree species, with higher SR for P. nigra and lower SR for A. glutinosa. The lower threshold of soil moisture was 20 and 17% for heterotrophic and total SR, respectively. Daily mean SR rate was positively correlated with soil temperature when soil moisture exceeded the threshold, with Q10 values ranging from 1.19 to 2.14; nevertheless, SR became decoupled from soil temperature when soil moisture dropped below these thresholds.

The economic value of reciprocal bilingualism

Some bilingual societies exhibit a distribution of language skills that can- not be explained by economic theories that portray languages as pure commu- nication devices. Such distribution of skills are typically the result of public policies that promote bilingualism among members of both speech commu- nities (reciprocal bilingualism). In this paper I argue that these policies are likely to increase social welfare by diminishing economic and social segmenta- tion between the two communities. However, these gains tend to be unequally distributed over the two communities. As a result, in a large range of circum- stances these policies might not draw su¢ cient support. The model is built upon the communicative value of languages, but also emphasizes the role of linguistic preferences in the behavior of bilingual individuals.

Osakeindeksiobligaation fair value Case: SHB Paras Kolmesta 5010

Tutkielmassa selvitetään monimutkaisen indeksiobligaation arvon määritystä obligaation juoksuaikana. Tutkittava indeksiobligaatio sijoittaa osakkeisiin, korkoon ja raaka aineisiin. Kyseisessä indeksi-obligaatiossa sijoitetaan korioptioihin ja ne ovat lisäksi niiltä osin kvantto optioita, kun positio on ollut tarpeen suojata valuutta kurssimuutoksia vastaan. Tämän lisäksi indeksiobligaatio sijoittaa nolla kuponkilainaan. Sijoittajalle on haastavaa ymmärtää oikein ja läpinäkyvästi monimutkaisen osakeindeksiobligaation arvonmääritystä sen juoksuaikana. Tässä tutkielmassa avataan monimutkaisen osakeindeksiobligaation arvonmäärityksen perusteet. Tutkielmassa huomataan, että sijoittajalla voi helposti olla vaara mielikuva siitä, miten arvo määrittyy. Tämä johtuu siitä, että arvonmääritys eroaa huomattavasti siitä mikä käy ilmi velkakirjan ehdoissa. Tutkielman keskeisin anti on se, että kyseinen osakeindeksiobligaatio antaa heikkoa tuottoa kesken juoksuajan, mikäli joko osakkeet, raaka-aineet tai korot kehittyvät negatiivisesti. Lisaksi raaka aineoptioiden hinnan määritys eroaa siitä, mitä sijoittaja olettaa sen olevan velkakirjan ehtoja lukiessaan. Raaka-aineiden hinnat määritellään forward hinnoista

On Value Creation at an Industrial Intersection – Bioenergy in the Forest and Energy Sectors

The traditional forest industry is a good example of the changing nature of the competitive environment in many industries. Faced with drastic challenges forestindustry companies are forced to search for new value-creating strategies in order to create competitive advantage. The emerging bioenergy business is now offering promising avenues for value creation for both the forest and energy sectors because of their complementary resources and knowledge with respect to bioenergy production from forest-based biomass. The key objective of this dissertation is to examine the sources of sustainable competitive advantage and the value-creation opportunities that are emerging at the intersection between the forest and energy industries. The research topic is considered from different perspectives in order to provide a comprehensive view of the phenomenon. The study discusses the business opportunities that are related to producing bioenergy from forest-based biomass, and sheds light on the greatest challenges and threats influencing the success of collaboration between the forest and energy sectors. In addition, it identifies existing and potential bioenergy actors, and considers the resources and capabilities needed in order to prosper in the bioenergy field. The value-creation perspective is founded on strategic management accounting, the theoretical frameworks are adopted from the field of strategic management, and the future aspect is taken into account through the application of futures studies research methodology. This thesis consists of two parts. The first part provides a synthesis of the overall dissertation, and the second part comprises four complementary research papers. There search setting is explorative in nature, and both qualitative and quantitative research methods are used. As a result, the thesis lays the foundation for non-technological studies on bioenergy. It gives an example of how to study new value-creation opportunities at an industrial intersection, and discusses the main determinants affecting the value-creation process. In order to accomplish these objectives the phenomenon of value creation at the intersection between the forest and energy industries is theorized and connected with the dynamic resource-based view of the firm.

Determination of moisture content and water activity in algae and fish by thermoanalytical techniques

The water content in seafoods is very important since it affects their sensorial quality, microbiological stability, physical characteristics and shelf life. In this study, thermoanalytical techniques were employed to develop a simple and accurate method to determine water content (moisture) by thermogravimetry (TG) and water activity from moisture content values and freezing point depression using differential scanning calorimetry (DSC). The precision of the results suggests that TG is a suitable technique to determine moisture content in biological samples. The average water content values for fish samples of Lutjanus synagris and Ocyurus chrysurus species were 76.4 ± 5.7% and 63.3 ± 3.9%, respectively, while that of Ulva lactuca marine algae species was 76.0 ± 4.4%. The method presented here was also successfully applied to determine water activity in two species of fish and six species of marine algae collected in the Atlantic coastal waters of Bahia, in Brazil. Water activity determined in fish samples ranged from 0.946 - 0.960 and was consistent with values reported in the literature, i.e., 0.9 - 1.0. The water activity values determined in marine algae samples lay within the interval of 0.974 - 0.979.

Effects of Surface Properties and Wood Modification into Direct Printing on Wood

Building industry is a high volume branch which could provide prominent markets for wood based interior decoration solutions. Competition in interior decoration markets requires versatility in appearance. Versatility in wood appearance and added value could be achieved by printing grain patterns of different species or images directly onto wood. The problem when planning wood printing’s implementing into durable applications is basically how to transfer a high quality image or print sustainably onto wood, which is porous, heterogeneous, dimensionally unstable, non-white and rough. Wood preservation or treating, and modification can provide durability against degradation but also effect to the surface properties of wood which will effect on printability. Optimal adhesion is essential into print quality, as too high ink absorbance can cause spreading and too low ink absorbance cause pale prints. Different printing techniques have different requirements on materials and production. The direct printing on wood means, that intermedias are not used. Printing techniques with flexible printing plates or in fact non-impact techniques provide the best basis for wood printing. Inkjet printing of wood with different mechanical or chemical surface treatments, and wood plastic composite material gave good results that encourage further studies of the subject. Sanding the wood surface anti-parallel to the grain gave the best overall printing quality. Spreading parallel to the grain could not be avoided totally, except in cases where wood was treated hydrophobic so adhesion of the ink was not sufficient. Grain pattern of the underlying wood stays clearly visible in the printed images. Further studies should be made to fine tune the methods that already gave good results. Also effects of moisture content of wood, different inks, and long-term exposure to UV-radiation should be tested.