Selenate and selenite on yield and agronomic biofortification with selenium in rice

The objective of this work was to evaluate the effect of doses of selenate and selenite on rice (Oryza sativa) biofortification with Se, as well the influence of these forms of Se in the levels of P, S, Fe, and Zn in grains. The experiment was conducted in a greenhouse, in pots with 4 dm(3) of a sandy clay loam Latosol, with medium texture, in a 5x2 factorial arrangement with five doses of Se (0, 0.75, 1.50, 3.0, and 6.0 mg dm(-3)) and two forms of Se (selenate and selenite). Selenate provided greater efficiency of root uptake of Se, plant-use efficiency, translocation from roots to shoots, and content of this element in rice grains. The application of Se during fertilization influences the levels of P, S, and Zn, but does not affect those of Fe in rice grains.

Oxygen reduction reaction catalyzed by epsilon-MnO2: Influence of the crystalline structure on the reaction mechanism

The oxygen reduction reaction (ORR) was studied in KOH electrolyte on carbon supported epsilon-manganese dioxide (epsilon-MnO2/C). The epsilon-MnO2/C catalyst was prepared via thermal decomposition of manganese nitrate and carbon powder (Vulcan XC-72) mixtures. X-ray powder diffraction (XRD) measurements were performed in order to determine the crystalline structure of the resulting composite, while energy dispersive X-ray analysis (EDX) was used to evaluate the chemical composition of the synthesized material. The electrochemical studies were conducted using cyclic voltammetry (CV) and quasi-steady state polarization measurements carried out with an ultra thin layer rotating ring/disk electrode (RRDE) configuration. The electrocatalytic results obtained for 20% (w/w) Pt/C (E-TEK Inc., USA) and alpha-MnO2/C for the ORR, considered as one of the most active manganese oxide based catalyst for the ORR in alkaline media, were included for comparison. The RRDE results revealed that the ORR on the MnO2 catalysts proceeds preferentially through the complete 4e(-) reduction pathway via a 2 plus 2e(-) reduction process involving hydrogen peroxide as an intermediate. A benchmark close to the performance of 20% (w/w) Pt/C (E-TEK Inc., USA) was observed for the epsilon-MnO2/C material in the kinetic control region, superior to the performance of alpha-MnO2/C, but a higher amount of HO2- was obtained when epsilon-MnO2/C was used as catalyst. The higher production of hydrogen peroxide on epsilon-MnO2/C was related to the presence of structural defects, typical of this oxide, while the better catalytic performance in the kinetic control region compared to alpha-MnO2/C was related with the higher electrochemical activity for the proton insertion kinetics, which is a structure sensitive process. (C) 2012 Elsevier Ltd. All rights reserved.

Influence of the relative amounts of crystalline and amorphous phases on the mechanical properties of polyamide-6 nanocomposites

The relative amounts of amorphous and crystalline ?- and a-phases in polyamide-6 nanocomposites, estimated from the deconvolution of X-ray diffraction peaks using Gaussian functions, correlates with their mechanical, thermomechanical, and barrier properties. The incorporation of organoclay platelets (Cloisite 15A and 30B) induced the crystallization of the polymer in the ? form at expense of the amorphous phase, such that 12 wt % of Cloisite is enough to enhance the mechanical and the thermomechanical properties. However, higher nanofiller loads were necessary to achieve good barrier effects, because this property is mainly dependent on the tortuous path permeation mechanism of the gas molecules through the nanocomposite films. (C) 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

DETERMINATION OF DICLOFENAC SODIUM IN RABBIT PLASMA BY HPLC/UV: EVALUATION AND CHARACTERIZATION OF ITS CRYSTALLINE FORMS, ANHYDROUS AND HYDRATE, ON THE ANTIPYRETIC EFFECT

Diclofenac sodium (DS) is a non-steroidal anti-inflammatory drug that is widely prescribed for the treatment of rheumatoid arthritis and post-surgery analgesia. The active pharmaceutical ingredient is the anhydrous form; however, it can also exist in hydrate form. In this context, knowing the properties of the solid state is important and relevant in the pharmaceutical area because they have a significant impact on the solubility, bioavailability, and chemical stability of the drugs. In the present study, data from XRPD, FTIR spectroscopy, and thermal analysis were used for the identification and characterization of DS forms (anhydrous and hydrate). An HPLC method was optimized to evaluate the plasma concentration of DS in rabbits. The optimized method exhibited good linearity over the range 0.1-60 mu g/mL with correlation coefficients of >0.9991. The mean recovery was 100%. Precision and accuracy were determined within acceptable limits. Finally, to compare the pharmacological properties of anhydrous and hydrate DS forms, we investigated their effects in the febrile response induced by lipopolysaccharide from E. coli in rabbits. The results show that the antipyretic effect of anhydrous and hydrate DS forms are similar.

Nanogravimetric study of lead underpotential deposition on selenium thin films as a semiconductor alloy formation procedure

An electrochemical quartz crystal microbalance Au electrode modified with a Se thin film was used to investigate the electrochemical behavior of lead ad-atoms using underpotential deposition (UPD) conditions. A specific quasi-reversible process was observed during the reduction of Pb2+ on Se thin films in perchloric acid media. The charge density of Pb ad-atoms on Se thin film (46.86 mu C cm(-2)) suggests a recovery of 0.1 monolayers, which is in good agreement with EQCM data. The Se thin film can be successfully alloyed with Pb atoms that are deposited by chronoamperometry using time intervals large enough to allow for diffusion toward the inner Se phase. Linear sweep voltammetry combined with EQCM in perchloric acid was used to characterize the amount of Pb absorbed in the Se thin film. These findings offer a new strategy for alloy formation in semiconductor films using UPD as an effective tool to quantify the exact amount of the incorporated metal.

Glutathione Peroxidase 1 Pro198Leu Polymorphism in Brazilian Alzheimer's Disease Patients: Relations to the Enzyme Activity and to Selenium Status

Background/Aims: Oxidative stress plays a central role in Alzheimer's disease (AD). Pro198Leu cytosolic glutathione peroxidase (GPx1) polymorphism seems to be associated with a lower activity of this enzyme, but there are no studies with AD patients. Thus, the aim was to determine the frequency of the GPx1 Pro198Leu polymorphism in AD patients and to verify its relation to glutathione peroxidase (GPx) activity and selenium (Se) status. Methods:The study was carried out in a group of AD elderly (n = 28) compared to a control group (n = 29). Blood Se concentrations were measured through hydride generation atomic absorption spectroscopy. GPx activity was determined using a commercial kit, and the polymorphism using amplified DNA sequencing. Results:The distribution of genotypes was not different between groups. The variant allele frequency was 0.179 (AD group) and 0.207 (control group). Although no differences regarding GPx activity were found between individuals with different genotypes, lower blood Se levels were found in Pro/Pro AD patients compared to Pro/Pro control subjects, which was not found in the Pro/Leu groups. Moreover, the association between the erythrocyte Se concentration and GPx activity was affected by the Pro198Leu genotype. Conclusions: Results indicate that this polymorphism had apparently affected Se status in AD patients and that more studies in this field are necessary. Copyright (c) 2012 S. Karger AG, Basel

No evidence of selenosis from a selenium-rich diet in the Brazilian Amazon

Selenium (Se) is an essential element and a well-known anti-oxidant. In the Lower Tapajos River region of the Brazilian Amazon, biomarkers of Se range from normal to very high. The local traditional diet includes important Se sources such as Brazil nuts, chicken, game meat and certain fish species. Some studies have reported alterations in keratin structure, gastrointestinal problems and paresthesia in populations with high Se intake. The objective of the present study was to evaluate cutaneous and garlic odor of the breath signs and sentinel symptoms of Se toxicity (selenosis) in relation to Se status in communities along the Tapajos River. Participants (N = 448), aged 15-87 years, were recruited from 12 communities. Se concentrations were measured in blood (B-Se) and plasma (P-Se) by ICP-MS. A nurse performed an examination of the hair, nails, skin and breath for signs of Se toxicity. Interview-administered questionnaires were used to collect information on socio-demographics, medical history and possible symptoms of Se toxicity. In this population, the median levels of B-Se and P-Se were 228.4 mu g/L (range 103.3-1500.2 mu g/L) and 134.8 mu g/L (range 53.6-913.2 mu g/L) respectively. Although B-Se and P-Se surpassed concentrations considered toxic (B-Se: 1000 mu g/L (U.S. EPA, 2002)), no dermal or breath signs or symptoms of Se toxicity were associated with the biomarkers of Se status. In the present study population, where Se intake is mostly from traditional diet, there is no evidence of selenosis. These findings support the need to re-assess Se toxicity considering factors such as the chemical form of Se exposure, route of exposure (inhaled versus ingested), co-exposures to toxic elements such as mercury. Considering the current food transition towards a western diet in the Amazon, further studies should address the possible association between high Se status and cardiometabolic health in this study population. (C) 2011 Elsevier Ltd. All rights reserved.

The influence of the Pt crystalline surface orientation on the glycerol electro-oxidation in acidic media

We investigated the electrochemical oxidation of glycerol on low-index Pt single crystals in acidic media (H2SO4 and HClO4) by cyclic voltammetry and Fourier Transform Infrared (FTIR) spectroscopy and we verified that this is a surface sensitive reaction. Pt(100) and Pt(110) surface structures favor the breaking of the C-C-C bond at low potentials (say 0.05 V), as seen by the formation of CO, one of the adsorbed residues of the glycerol dissociation, which poisons these surfaces even at high potentials. Pt(111) surface structure does not favor the C-C-C bond breaking at potentials as low as 0.05 V. However, Pt(111) is less poisoned by residues of glycerol dissociation and, for this reason, it is more active for glycerol oxidation than Pt(100) and Pt(110) at low potentials. Carbonyl containing compounds and CO2 were detected as reaction products of the glycerol oxidation on all investigated single-crystal Pt surfaces. The ratio between CO2 and carbonyl containing compounds is clearly much higher for Pt(100) and Pt(110) than for Pt(111). (C) 2012 Elsevier Ltd. All rights reserved.

Organic and inorganic sources of zinc, copper and selenium in diets for dairy cows: intake, blood metabolic profile, milk yield and composition

The present study was carried out with the objective of evaluating the effects of feeding dairy cows with organic or inorganic sources of zinc (Zn), copper (Cu) and selenium (Se) on blood concentrations of these minerals, blood metabolic profiles, nutrient intake and milk yield and composition. Nineteen Holstein cows were selected and randomly assigned to two groups for receiving organic (n = 9) or inorganic (n = 10) sources of Zn, Cu and Se from 60 days before the expected date of calving to 80 days of lactation. Samples of feed, orts and milk were collected for analysis. Body condition score (BCS) was determined and blood samples were collected for analysis of Zn, Cu and Se concentrations, as well as for metabolic profile. Supplying organic or inorganic sources of Zn, Cu, and Se did not affect dry matter and nutrient intake, blood metabolic profile, milk yield and composition, plasma concentration of these minerals, and BCS or change the BCS in cows from 60 days before the expected date of calving to 80 days of lactation. An effect of time was observed on all feed intake variables, plasma concentrations of Zn and Se, milk yield, milk protein content, BCS and change in BCS.

Enrichment of Pleurotus ostreatus mushrooms with selenium in coffee husks

Pleurotus ostreatus fungus forms an edible mushroom that possesses important nutritional and medicinal properties. Selenium (Se) is essential to human diets and it is in low concentration in the soil, and consequently in food. P. ostreatus was grown in coffee husks enriched with various concentrations of sodium selenite. The biological efficiency of P. ostreatus was affected by the addition of high concentrations of Se. The highest level of Se absorption was obtained by adding 51 mg kg(1) of sodium selenite. The mushrooms from first flush contained more Se than the further flushes. These results demonstrate the great potential of coffee husks in the production of Se-enriched mushrooms and show the ability of this fungus to absorb and biomagnify Se. (C) 2011 Elsevier Ltd. All rights reserved.

Brazilian nut consumption improves selenium status and glutathione peroxidase activity and reduces atherogenic risk in obese women

Studies have shown that there are inverse relationships between nut consumption and the reduction of cardiovascular risk. This study tested the hypothesis that daily consumption of Brazilian nuts would have a positive effect upon selenium (Se) status, erythrocyte glutathione peroxidase activity, lipid profile, and atherogenic risk in severely obese women. Thirty-seven severely obese women each consumed 1 Brazilian nut a day (290 mu g of Se a day) for 8 weeks. Blood Se concentrations, total erythrocyte glutathione peroxidase activity, lipid profile, and Castelli I and H indexes were evaluated before and after the nuts consumption. All the patients were Se deficient at baseline; this deficiency was remedied by the consumption of the Brazilian nut (P < .0001). The intake of Brazilian nuts promoted a significant increase in high-density lipoprotein cholesterol concentrations (P < .00001), which then resulted in a significant improvement of the Castelli I (P < .0002) and II (P < .0004) indexes. This study shows that obese people who implement daily consumption of Brazilian nuts can improve both Se status and lipid profile, especially high-density lipoprotein cholesterol levels, thereby reducing cardiovascular risks. (C) 2012 Published by Elsevier Inc.

Effects of in vitro selenium supplementation on blood and milk neutrophils from dairy cows

The study was designed to assess the effects of in vitro selenium addition on intracellular hydrogen peroxide production by neutrophils from the milk and blood of dairy cows. Blood from 10 dairy cows and 20 milk samples from five dairy cows were incubated with 0 mg (control) or 10μM of sodium selenite. Then, milk and blood neutrophils were submitted for evaluation of intracellular hydrogen peroxide production by flow cytometry using 2',7'-dichlorofluorescein diacetate as a probe. The selenium status of the animals was evaluated by determination of the blood glutathione peroxidase activity. The results of the present work showed that in vitro selenium supplementation leads to an enhancement in intracellular hydrogen peroxide production, which indicates an improvement in the bactericidal effects of blood and milk neutrophils even in cows with a selenium-adequate status. Thus, the present study showed that in vitro Se supplementation leads to an enhancement in intracellular hydrogen peroxide production, indicating an improvement in the bactericidal effects of blood and milk neutrophils in cows with Se-adequate status.

Microstructure and metal-insulator transition in single crystalline KMo4O6

High quality KMo4O6 single crystals with tetragonal structure (space group P4/mbm) have been prepared by fused salt electrolysis. The crystals were studied by scanning electron microscopy (SEM), X-ray diffractometry, electrical resistivity, and magnetization measurements. X-ray powder diffraction patterns and SEM have given some information on the growth of single crystals. Electrical resistivity as a function of temperature shows that the KMo4O6 compound is a bad metal with resistivity change of approximately 30% in the temperature range from 2 to 300K. A metal-insulator transition (MIT), observed at approximately 110K, has been also confirmed for this material. Magnetization as a function of temperature agrees with previous report, however a magnetic ordering has been observed in M(H) curves in the whole temperature range.

Durability of crystalline monumental stones in terms of their petrophysical characteristics

The durability of stone building materials is an issue of utmost importance in the field of monument conservation. In order to be able to preserve our built cultural heritage, the thorough knowledge of its constituent materials and the understanding of the processes that affect them are indispensable. The main objective of this research was to evaluate the durability of a special stone type, the crystalline stones, in correlation with their intrinsic characteristics, the petrophysical properties. The crystalline stones are differentiated from the cemented stones on the basis of textural features. Their most important specific property is the usually low, fissure-like porosity. Stone types of significant monumental importance, like the marble or granite belong to this group. The selected materials for this investigation, indeed, are a marble (Macael marble, Spain) and a granite (Silvestre Vilachán granite, Spain). In addition, an andesite (Szob andesite, Hungary) also of significant monumental importance was selected. This way a wide range of crystalline rocks is covered in terms of petrogenesis: stones of metamorphic, magmatic and volcanic origin, which can be of importance in terms of mineralogical, petrological or physical characteristics. After the detailed characterization of the petrophysical properties of the selected stones, their durability was assessed by means of artificial ageing. The applied ageing tests were: the salt crystallization, the frost resistance in pure water and in the presence of soluble salts, the salt mist and the action of SO2 in the presence of humidity. The research aimed at the understanding of the mechanisms of each weathering process and at finding the petrophysical properties most decisive in the degradation of these materials. Among the several weathering mechanisms, the most important ones were found to be the physical stress due to crystallization pressure of both salt and ice, the thermal fatigue due to cyclic temperature changes and the chemical reactions (mostly the acidic attack) between the mineral phases and the external fluids. The properties that fundamentally control the degradation processes, and thus the durability of stones were found to be: the mineralogical and chemical composition; the hydraulic properties especially the water uptake, the permeability and the drying; the void space structure, especially the void size and aperture size distribution and the connectivity of the porous space; and the thermal and mechanical properties. Because of the complexity of the processes and the high number of determining properties, no mechanisms or characteristics could be identified as typical for crystalline stones. The durability or alterability of each stone type must be assessed according to its properties and not according to the textural or petrophysical classification they belong to. Finally, a critical review of standardized methods is presented, based on which an attempt was made for recommendations of the most adequate methodology for the characterization and durability assessment of crystalline stones.

Crystalline assemblies of folded oligomers

In this work a novel design concept for folded oligomers is presented. The concept involves the insertion of a rigid spacer, the 1,3-bis(ethynylene)benzene unit, into linear alkyl-chain oligomers. Number and position of these spacers determine the molecular conformation of the oligomers in crystalline assemblies. In this way, chain folding is induced on crystallization at the air-water interface and in bulk. The packing arrangements in the crystalline monolayers were determined by grazing inzidence X-ray diffraction.