Projeto de um edifício para fins educacionais com foco na racionalização do consumo de água

The urban growth without the prior infrastructure has caused many environmental impacts such as the damage to quality of the water resources in the cities. Along with natural scarcity in some regions, this is one of the factors that limit the availability of drinking water. As a result, the conservation of drinking water is becoming one of the major concerns in sustainable architectural projects. Within this context, this dissertation proposes to develop the design of an educational building focusing on water consumption rationalization. The proposed project is located in UFRN Campus at Currais Novos, an area of warm and dry climate and low rainfall. The proposal seeks to integrate ways to reduce water consumption o to architecture, in order to exploit the advantages and savings. After quantifying the benefits achieved, it was concluded that it is possible to reduce significantly the drinking water consumption in educational buildings in universities using three principles: reduction the water consumption at the point of use, replacement of the water source and internal recycling. Calculations and simulations indicated that the proposed building may have water consumption up to 56% lower than if it would be provided by conventional facilities. Rationalization of water consumption brings direct and indirect benefits, with influences on the environmental, social and economic fields

Sanitarismo e planejamento urbano: a trajetória das propostas urbanísticas para Natal entre 1935 e 1969

The Escritório Saturnino de Brito (Saturnino de Brito Office), created in 1920 under the sanitaristic guidance of the engineer Saturnino de Brito, has a vast record of works throughout the whole national territory, even after the death of its founder, in 1929 at which point his son, and also engineer, Saturnino de Brito Filho, assumed the head of the company , with a compromise to continue his father s work and assure his administrative, technical and urbanistic principles up until the early 1980s, when that institution came to an end. The scarcity of theorical studies about this Office, alongside the importance of the contributions it made in countless cities, oriented the focus of this study on its performance in Natal, where it remained from 1935 to 1969, designing, executing and managing sanitationist works and the services associated with them and going through several political, economical, social, cultural and urbanistic contexts periodicized in this work into three moments. Thus, it is intended to analyze how the Saturnino de Brito Office behaved and adapted itself to the conjunctural changes that unfolded into each of these moments, and more specifically, to observe the forms of intervention adopted the principles, the instruments and the scope aiming to verify the transition of the sanitaristic set of urbanistic ideas into the urban planning as a development strategy on a local level

Mapeamento cromossômico de genes ribossomais em espécies estuarinas da família Gerreidae Identificação de uniformidade cariotípica e sua empregabilidade com fins biotecnológicos - REPROGEN

Perciformes are dominant in the marine environment, characterized as the largest and most diverse fish group. Some families, as Gerreidae, popularly known as silver jennies, carapebas, or mojarras have a high economic potential to marine fish farming, natural explotation and game fishing. Genetic information of these species are of fundamental importance for their management and production. Despite exist over 13,000 marine fish species described, only 2% were cytogenetically analyzed and less than 1% have some reproductive characteristics known. Induced breeding, cytogenetic characterization and cryopreservation of gametes, represent important areas in applied fish studies. In this project cytogenetic analyzes were performed to acess genetic aspects of Gerreidae species, distributed in coastal and estuarine regions of Northeast Brazil. Different methods for identifying chromosomal regions were employed using conventional techniques (Ag-NORs, C-banding), staining with base-specific fluorochromes (DAPI-CMA3), and physical mapping of ribosomal genes 18S and 5S rDNA, through hybridization in situ with fluorescent probes (FISH). The six species analyzed showed remarkable chromosome conservatism. The 18S and 5S ribosomal genes when analyzed in phylogenetic perspective demonstrate varied evolutionary dynamics, suggesting ocurrence of stasis process in some groups and greater dynamism in others. Double FISH with 18S and 5S probes showed both how efficient cytotaxonomic markers in the homogeneous karyotypes of this group of species. The karyotypic pattern identified in addition to the evolutionary aspects of karyotype, are suggestive of existence of low potential of post-zygotic barrier, prompting further research to prospect for artificial interspecific hybridization of these species of commercial importance

Otimização do processo de síntese do aluminato de cobalto via método de polimerização de complexos (MPC) através do planejamento fatorial fracionado

In the ceramics industry are becoming more predominantly inorganic nature pigments. Studies in this area allow you to develop pigments with more advanced properties and qualities to be used in the industrial context. Studies on synthesis and characterization of cobalt aluminate has been widely researched, cobalt aluminate behavior at different temperatures of calcinations, highlighting especially the temperatures of 700, 800 and 900° C that served as a basis in the development of this study, using the method of polymerization of complex (CPM), economic, and this method applied in ceramic pigment synthesis. The procedure was developed from a fractional factorial design 2 (5-2) in order to optimize the process of realization of the cobalt aluminate (CoAl2O4), having as response surfaces the batch analysis data of Uv-vis spectroscopy conducted from the statistic software 7.0, for this were chosen five factors as input variables: citric acid (stoichiometric manner), puff or pyrolysis time (h), temperature (° C), and calcinations (° C/min), at levels determined for this study. By applying statistics in the process of obtaining the CoAl2O4 is possible the study of these factors and which may have greater influence in getting the synthesis. The pigments characterized TG/DSC analyses, and x-ray diffraction (XRD) and scanning electron microscope (SEM/EDS) in order to establish the structural and morphological aspects of pigment CoAl2O4, among the factors studied it were found to statically with increasing calcinations temperature 700°< 800 <900 °C, the bands of Uv-vis decrease with increasing intensity of absorbance and that with increasing time of puff or pyrolysis (h) there is an increase in bands of Uv-vis proportionally, the generated model set for the conditions proposed in this study because the coefficient of determination can explain about 99.9% of the variance (R²), response surfaces generated were satisfactory, so it s possible applicability in the ceramics industry of pigments

Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%

Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Síntese do Poli (ácido láctico) por policondensação direta utilizando um planejamento fatorial

The environmental impact caused by the disposal of non-biodegradable polymer packaging on the environment, as well as the high price and scarcity of oil, caused increase of searches in the area of biodegradable polymers from renewable resources were developed. The poly (lactic acid) (PLA) is a promising polymer in the market, with a large availability of raw material for the production of its monomer, as well as good processability. The aimed of this study was synthesis PLA by direct polycondesation of lactic acid, using the tool of experimental design (DOE) (central composite rotatable design (CCRD)) to optimize the conditions of synthesis. The polymer obtained was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), viscosimetric analysis, differential scanning calorimeter (DSC) and size exclusion chromatography (SEC). The results confirmed the formation of a poly (lactic acid) semicrystalline in the syntheses performed. Through the central composite rotatable design was possible to optimize the crystallization temperature (Tc) and crystallinity degree (Xc). The crystallization temperature maximum was found for percentage of catalyst around the central point (0,3 (%W)) and values of time ranging from the central point (6h) to the upper level (+1) (8h). The crystallization temperature maximum was found for the total synthesis time of 4h (-1) and percentage of catalyst 0,1(W%) (-1). The results of size exclusion chromatography (SEC) showed higher molecular weights to 0,3 (W%) percent of catalyst and total time synthesis of 3,2h

Aplicação da metodologia de planejamento de experimentos para formulação de massas cerâmicas para telhas

Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations

Metodologia de utilização de dados de sensoriamento remoto em zonas costeiras sob influência da indústria petrolífera

Oil spills in marine environments represent immediate environmental impacts of large magnitude. For that reason the Environmental Sensitivity to Oil Maps constitute a major instrument for planning actions of containment and cleanup. For both the Environmental Sensitivity Maps always need to be updated, to have an appropriate scale and to represent accurately the coastal areas. In this context, this thesis presents a methodology for collecting and processing remote sensing data for the purpose of updating the territorial basis of thematic maps of Environmental Sensitivity to Oil. To ensure greater applicability of the methodology, sensors with complementary characteristics, which provide their data at a low financial cost, were selected and tested. To test the methodology, an area located on the northern coast of the Northeast of Brazil was chosen. The results showed that the products of ASTER data and image hybrid sensor PALSAR + CCD and HRC + CCD, have a great potential to be used as a source of cartographic information on projects that seek to update the Environmental Sensitivity Maps of Oil

Um modelo analítico da qualidade da dieta de adolescentes estudantes da rede publica de ensino de Natal, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Diferenças de gênero na produção de associações livres de palavras através do ciclo sono-vigília

Although several studies, have shown differences in cognitive performance between men and women, it not yet known whether these differences occur in tasks involving free association of words (WA). Studies across the sleep-wake cycle (SWC) suggest that rapid eye movement sleep (REM) favors semantic flexibility, in comparison with pre-sleep waking (Pre-WK), slow-wave sleep (SWS) and post-sleep waking (Post-WK). The present work has two aims: (1) to evaluate the semantic distances of word pairs produced by AP, comparing men and women, (2) to evaluate semantic distance in word pairs produced by free association across the SWC in young adults of both sexes. To achieve aim (1), we applied a task of WA in 68 adult volunteers during waking (52 women and 16 men). The WA task consisted of writing the first word that came to mind after viewing another word offered as a stimulus (root Word). To achieve aim (2), we performed polysomnography to identify specific stages of the SWC. The experimental subjects were then awakened (if they were asleep) and were immediately given a WA task. The task was administered to 2 groups of 10 subjects each (G1 and G2). G1 subjects were stimulated with the same set of root words after waking from various states of SWC, while G2 subjects received sets of different root words at each state of the SWC. In the absence of a Portuguese corpus suitable for the measurement of semantic distances, the words collected in our experiments were translated to English, and semantically quantified within a systematic and representative corpus of that language (Wordnet). This procedure removed the polysemies typical of Portuguese, but preserved the semantic macrostructure common to both languages. During waking, we found that semantic distances are significantly lower in WA produced by women, in comparison with the distances observed in men. Through the SWC, there were no statistically significant differences in G1. In G2 women, we detected a significant increase of semantic distances upon being awakened from SWS. In contrast, G2 men showed a significant increase in semantic distances upon being awakened from REM. The results of the first experiment are consistent with the notion that women have a more concrete reasoning than men. The results of the second experiment indicate that men awakened from REM present more flexibility in word association than when being awakened from other states. In contrast, women showed more flexible word association after being awakened from SWS, in compared with other states. The results indicate that the cognitive flexibility attributed to different states of the SWC shows gender dependency

Desenvolvimento de microemulsões liofilizadas como um potencial sistema de liberação de fármacos usando planejamento experimental fatorial

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Qualidade da água e composição fitoplanctônica de um viveiro de piscicultura utilizado para fins de pesca esportiva e irrigação

Water quality of a fish pond used by UNESP, at Jaboticabal, SP, Brazil, for both fishing and irrigation has been evaluated according to certain limnological parameters and to its phytoplankton composition. During the year, four sampling sites were assigned at the pond: P(1)=inlet water in the pond; P(2)=inlet water from a shrimp pond; P(3)=irrigation spot; and P(4)=outlet water (water flowing directly into another pond). The collected data show a water pond with high concentration of nutrients and chlorophyll-a, and high values of electrical conductivity, total hardness and total dissolved solids, proceeding from the above pond. These factors affected substantially some biological parameters, such as chlorophyll-a and phytoplankton. In P(3), whereas class Zygnematophyceae showed the highest specimens richness, with 34.01%, the Chlorophyceae, that had the highest number of genera, comprehended 33.52% of the total number of individuals. The use of the water fish pond for irrigation must be re-evaluated, due to eutrophic conditions of the water, the presence of potentially toxic cyanobacteria, so as the proper management employed.

Políticas públicas e associativismo no RN: experiências populares

Rural Popular experiences, socially organized on the constructions of the dams at Espinharas River, Serra Negra do Norte, which have been investigated, have reached in positive results. Several institutions, such as the City and State Power, multilaterals, governmental and non-governmental financial organizations, commonly refer to the success of such experiences. What success are they referring to? Is it recognized by family rural workers? What about institutional parts, how do they evaluate such experience? Is there legal continuity on such association structure? What kinds of gains have there been with such experiences? Has the association structure become any stronger? In search for demystifying the process, it has been made a research on classic and contemporaneous authors, as well as the interview of ten institutional parts, and twenty rural parts involved on the process, as well as the analysis of thirty-eight of the associations. It was concluded that the applied social public policies had resulted in heterogeneous social-economical process that has fulfilled the first step of a planning (not yet documented, but know by some institutional parts which lead, and still lead such social initiative). In the coming years the associations are to have a great potential for development, with the dams, as well as other projects. This persistence and external support, when integrated may have great deeds come to reality

Planejamento em saúde no Brasil: convergências e divergências entre instâncias de gestão

Trata-se de uma investigação que busca revelar convergências e divergências no processo de planificação da Política Pública de Saúde, com foco primordial na participação dos organismos de representação social na consolidação do Sistema Único (SUS), destacando a Conferência Nacional de Saúde CNS, instância que deve ter participação obrigatória na formulação de recomendações para essa política estatal. Considera que a planificação reúne elementos de concepção jurídica, técnica e política para a elaboração dos documentos intitulados Planos Nacionais de Saúde PNS. A partir de pesquisa qualitativa de base documental e argumentação com apoio de Cartografia Simbólica, põe em exame o processo de elaboração e o teor presente nos relatórios da 12ª (2003), 13ª (2007) e 14ª CNS (2011), alinhando seus eixos, diretrizes e prioridades nos correspondentes PNS nos quadriênios 2004-2007, 2008-2011 e 2012-2015. A escolha desses instrumentos, na temporalidade sugerida, tem por esteio o período em que a implantação do sistema de Planejamento do SUS PlanejaSUS, orienta normativa e tecnicamente a elaboração do PNS, tendo como uma de suas referências o que foi emanado das conferências. Propõe-se verificar as tensões existentes entre momentos distintos da definição das prioridades elencadas nas políticas públicas de saúde à luz das contribuições teóricas sobre a concepção do Estado, numa visão contemporânea associada à sua dinâmica de atuação vinculada ao modo de produção e acumulação capitalista; sobre a metodologia do Planejamento Estratégico com base na participação de atores diversos; e ainda, na análise sobre a expressão desse participacionismo na ótica dos processos democráticos representativos no SUS. Na confecção dos mapas cartográficos foi proposta a correlação entre os conteúdos dos Relatórios das 12ª a 14ª conferências de saúde com o que está expresso nas prioridades constantes nos Planos Nacionais de Saúde (2004 a 2007, 2008 a 2011 e 2012 a 2015), verificando-se aproximações e distanciamentos existentes entre o que expressa a sociedade e a política governamental. Conclui-se que, do exame crítico entre as diretrizes e prioridades contidas no acervo documental existente e sua metodologia de construção, com fundamento na argumentação do aporte teórico trabalhado, são verificadas tensões e harmonizações que revelam pontos convergentes e dissonantes das pactuações e consensos entre os atores sociais representantes dos segmentos, no qual critério da representatividade condiciona a defesa de opiniões, interesses e prioridades, de modo diverso para os que estão implicados nesse processo de planificação