Le remodelage cardiaque lors de la gestation chez la rate : implication du récepteur aux minéralocorticoïdes et altérations par un supplément sodique

La grossesse induit de profonds changements hémodynamiques et métaboliques de l’organisme maternel qui ont des conséquences sur le cœur. L’adaptation du cœur à cette condition physiologique nécessite un remodelage de sa structure et par conséquent des ajustements de sa fonction. Les mécanismes responsables de ces adaptations sont en grande partie inconnus. Cependant, ces connaissances sont essentielles pour la compréhension des complications cardiovasculaires, telle que l’hypertension gestationnelle (HG), qui constituent un risque pour la santé de la mère et du fœtus. Afin de caractériser les adaptations du cœur lors de la grossesse, l’originalité de notre approche expérimentale consistait à étudier le remodelage à l’échelle des cardiomyocytes du ventricule gauche. Ainsi, notre premier objectif était de déterminer les modifications structurales et fonctionnelles des cardiomyocytes chez la rate en vue d’identifier les altérations lors de l’HG. Chez les rates gestantes, le remodelage structural des cardiomyocytes se caractérise par une hypertrophie cellulaire avec une augmentation proportionnelle des dimensions. L’HG a été induite par un supplément sodique (0.9% NaCl) dans la diète. L’inadaptation structurale lors de l’HG se traduit par une diminution du volume cellulaire. L’étude des modifications fonctionnelles a révélé que lors de la gestation le fonctionnement contractile des cellules est dépendant de l’adaptation du métabolisme maternel. En effet, les substrats énergétiques, lactate et pyruvate, induisent une augmentation de la contractilité des cardiomyocytes. Cet effet est plus faible dans les cellules des rates hypertendues, ce qui suggère des anomalies du couplage excitation-contraction, dans lequel les courants calciques de type L (ICa-L) jouent un rôle important. Paradoxalement, le lactate et le pyruvate ont induit une augmentation de la densité des courants ICa-L seulement chez les rates hypertendues. Le récepteur aux minéralocorticoïdes (RM) est connu pour son implication dans le remodelage structuro-fonctionnel du cœur dans les conditions pathologiques mais pas dans celui induit par la grossesse. Notre deuxième objectif était donc de déterminer le rôle du RM dans l’adaptation de la morphologie et de la contractilité des cardiomyocytes. Des rates gestantes ont été traitées avec le canrénoate de potassium (20 mg/kg/jr), un antagoniste des RM. L’inhibition des RM pendant la gestation empêche l’hypertrophie cellulaire. De plus, l’inhibition des RM bloque l’effet du lactate et du pyruvate sur la contractilité. Chez la femme, la grossesse est associée à des changements des propriétés électriques du cœur. Sur l’électrocardiogramme, l’intervalle QTc est plus long, témoignant de la prolongation de la repolarisation. Les mécanismes régulant cette adaptation restent encore inconnus. Ainsi, notre troisième objectif était de déterminer le rôle du RM dans l’adaptation de la repolarisation. Chez la rate gestante, l’intervalle QTc est prolongé ce qui est corroboré par la diminution des courants potassiques Ito et IK1. L’inhibition des RM pendant la gestation empêche la prolongation de l’intervalle QTc et la diminution des courants Ito. Les travaux exposés dans cette thèse apportent une vision plus précise du remodelage cardiaque induit par la grossesse, qui est permise par l’étude à l’échelle cellulaire. Nos résultats montrent que lors de la gestation et de l’HG les cardiomyocytes subissent des remodelages morphologiques contrastés. Notre étude a aussi révélé que lors de la gestation, la fonction contractile est tributaire des adaptations métaboliques et que cette relation est altérée lors de l’HG. Nos travaux montrent que la régulation de ces adaptations gestationnelles fait intervenir le RM au niveau de la morphologie, de la relation métabolisme/fonctionnement contractile et de la repolarisation. En faisant avancer les connaissances sur l’hypertrophie de la grossesse, ces travaux vont permettre d’améliorer la compréhension des complications cardiovasculaires gestationnelles.

Caractérisation des effets et des récepteurs de l'endothéline dans la vasculature utérine lors de la gestation chez la rate

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

L’Irak au bord de l’éclatement « Les dix péchés capitaux d’une reconstruction ratée »

Les causes de la crise irakienne actuelle sont multiples. Au-delà des implications immédiates, les séquelles de l’intervention militaire de 2003 sont les plus déterminantes. L’échec du processus de reconstruction institutionnelle a donné lieu à un État déficient, dysfonctionnel et corrompu offrant ainsi un terreau fertile à l’implantation et à la prolifération des mouvements terroristes et mafieux. L’auteur tente, dans la présente contribution, d’identifier « les raisons profondes » du drame actuel en tenant compte de l’impact des bouleversements intervenus depuis la chute du régime baathiste en avril 2003 sur les structures étatiques.

Effect of Feeding Rate on Plastic Extrudates

Selected grades of low density polyethylene (LDPE) polystyrene (PS) were extruded in a laboratory extruder by varying the feeding rate at different revolutions per minute and temperatures. The mechanical properties of the extruded plastic sheets were determined. LDPE shows a marked variation in mechanical properties with feeding rate while PS shows a marginal change in mechanical properties with feeding rate. However, for both plastics there is a particular feeding rate in the starved region which results in maximum mechanical properties.

Significance of Feeding Rate in the Extrusion of Filled and Gum 11R Vulcanizates

Filled and gum compounds of Isobutylene-Isoprene rubber were extruded through a laboratory extruder at various feeding rates, different temperatures and revolutions per minute. The extruded compounds were vulcanized up to their optimum cure times and the mechanical properties of the vulcanizates were determined. The properties suggest that there is a particular feeding rate in the starved fed region, which results in maximum mechanical properties. The study shows that running the extruder at a slightly starved condition is an attractive means of improving the physical properties.

A fibre optic evanescent wave sensor for monitoring the rate of pulsed laser deposition of metal thin films

A novel sensing technique for the in situ monitoring of the rate of pulsed laser deposition (PLD) of metal thin films has been developed. This optical fibre based sensor works on the principle of the evanescent wave penetration of waveguide modes into the uncladded portion of a multimode fibre. The utility of this optical fibre sensor is demonstrated in the case of PLD of silver thin films obtained by a Q-switched Nd:YAG laser which is used to irradiate a silver target at the required conditions for the preparation of thin films. This paper describes the performance and characteristics of the sensor and shows how the device can be used as an effective tool for the monitoring of the deposition rate of silver thin films. The fibre optic sensor is very simple, inexpensive and highly sensitive compared with existing techniques for thin film deposition rate measurements

A fibre optic evanescent wave sensor for monitoring the rate of pulsed laser deposition of metal thin films

A novel sensing technique for the in situ monitoring of the rate of pulsed laser deposition (PLD) of metal thin films has been developed. This optical fibre based sensor works on the principle of the evanescent wave penetration of waveguide modes into the uncladded portion of a multimode fibre. The utility of this optical fibre sensor is demonstrated in the case of PLD of silver thin films obtained by a Q-switched Nd:YAG laser which is used to irradiate a silver target at the required conditions for the preparation of thin films. This paper describes the performance and characteristics of the sensor and shows how the device can be used as an effective tool for the monitoring of the deposition rate of silver thin films. The fibre optic sensor is very simple, inexpensive and highly sensitive compared with existing techniques for thin film deposition rate measurements.

An optical fibre based evanescent wave sensor to monitor the deposition rate of thin films

A novel fibre optic sensor for the in situ measurement of the rate of deposition of thin films has been developed. Evanescent wave in the uncladded portion of a multimode fibre is utilised for this sensor development. In the present paper we demonstrate how this sensor is useful for the monitoring of the deposition rate of polypyrrole thin films, deposited by an AC plasma polymerisation method. This technique is simple, accurate and highly sensitive compared with existing techniques.

Evanescent wave sensor to monitor the etching rate of an optical fibre

The design and development of an evanescent wave sensor to determine the etching rate of the core of an optical fibre is discussed in this paper. The working of the device is based on the principle of propagation and loss of the evanescent wave in the cladding region of the fibre. The fraction of light intensity creeping out of the core of an uncladded fibre is a function of the core radius. As this radius decreases, the evanescent wave coupling to the medium surrounding the core enhances. This results in a decrease of the transmitted light intensity through the fibre. This technique is useful to design and fabricate optical fibres with different core geometries.

Chaotic, memory, and cooling rate effects in spin glasses: Evaluation of the Edwards-Anderson model

We investigate chaotic, memory, and cooling rate effects in the three-dimensional Edwards-Anderson model by doing thermoremanent (TRM) and ac susceptibility numerical experiments and making a detailed comparison with laboratory experiments on spin glasses. In contrast to the experiments, the Edwards-Anderson model does not show any trace of reinitialization processes in temperature change experiments (TRM or ac). A detailed comparison with ac relaxation experiments in the presence of dc magnetic field or coupling distribution perturbations reveals that the absence of chaotic effects in the Edwards-Anderson model is a consequence of the presence of strong cooling rate effects. We discuss possible solutions to this discrepancy, in particular the smallness of the time scales reached in numerical experiments, but we also question the validity of the Edwards-Anderson model to reproduce the experimental results.

Spatial and temporal characteristics of rain intensity in the peninsular Malaysia using TRMM rain rate

The present study is focused on the intensity distribution of rainfall in different classes and their contribution to the total seasonal rainfall. In addition, we studied the spatial and diurnal variation of the rainfall in the study areas. For the present study, we retrieved data from TRMM (Tropical Rain Measuring Mission) rain rate available in every 3 h temporal and 25 km spatial resolutions. Moreover, station rainfall data is used to validate the TRMM rain rate and found significant correlation between them (linear correlation coefficients are 0.96, 0.85, 0.75 and 0.63 for the stations Kota Bharu, Senai, Cameron highlands and KLIA, respectively). We selected four areas in the Peninsular Malaysia and they are south coastal, east coastal, west coastal and highland regions. Diurnal variation of frequency of rain occurrence is different for different locations. We noticed bimodal variation in the coastal areas in most of the seasons and unimodal variation in the highland/inland area. During the southwest monsoon period in the west coastal stations, there is no distinct diurnal variation. The distribution of different intensity classes during different seasons are explained in detail in the results

Effect of Feeding Rate in Polymer Extrusion ”

Starve feeding of single screw extruder was described as an important means of improving the performance characteristics of the extruder. In addition to such improvement with versatility, the starve feeding technique also may affect the mechanical properties of the extrudate since the heat transfer an(l mixing characteristics in the starve fed and Hood fed extruders are not the same. Since the material is more loosely packed in the channels of the starve fed extruder, there may be greater bed mobility and uniformity. Further, the. thermal an(l shear induced degradation are also less since possibilities of developing local high temperatures are less compared to a densely compacted extruder bed. This study has been undertaken mainly to explore the effect of feeding rate on the mechanical properties of rubber and plastic extrudates since the effect of feeding rate has not been analysed from this angle so far.

A Numerically efficient power optimization scheme for coded OFDM systems in achieving minimum frame error rate

Coded OFDM is a transmission technique that is used in many practical communication systems. In a coded OFDM system, source data are coded, interleaved and multiplexed for transmission over many frequency sub-channels. In a conventional coded OFDM system, the transmission power of each subcarrier is the same regardless of the channel condition. However, some subcarrier can suffer deep fading with multi-paths and the power allocated to the faded subcarrier is likely to be wasted. In this paper, we compute the FER and BER bounds of a coded OFDM system given as convex functions for a given channel coder, inter-leaver and channel response. The power optimization is shown to be a convex optimization problem that can be solved numerically with great efficiency. With the proposed power optimization scheme, near-optimum power allocation for a given coded OFDM system and channel response to minimize FER or BER under a constant transmission power constraint is obtained

Identification of models using failure rate and mean residual life of doubly truncated random variables

In this paper, we study the relationship between the failure rate and the mean residual life of doubly truncated random variables. Accordingly, we develop characterizations for exponential, Pareto 11 and beta distributions. Further, we generalize the identities for fire Pearson and the exponential family of distributions given respectively in Nair and Sankaran (1991) and Consul (1995). Applications of these measures in file context of lengthbiased models are also explored

Characterizations of distributions using log odds rate

In this paper, we examine the relationships between log odds rate and various reliability measures such as hazard rate and reversed hazard rate in the context of repairable systems. We also prove characterization theorems for some families of distributions viz. Burr, Pearson and log exponential models. We discuss the properties and applications of log odds rate in weighted models. Further we extend the concept to the bivariate set up and study its properties.