Litter fall production and decomposition in a fragment of secondary Atlantic Forest of São Paulo, sp, southeastern Brazil

Litter fall consists of all organic material deposited on the forest floor, being of extremely important for the structure and maintenance of the ecosystem through nutrient cycling. This study aimed to evaluate the production and decomposition of litter fall in a secondary Atlantic forest fragment of secondary Atlantic Forest, at the Guarapiranga Ecological Park, in São Paulo, SP. The litter samples were taken monthly from May 2012 to May 2013. To assess the contribution of litter fall forty collectors were installed randomly within an area of 0.5 ha. The collected material was sent to the laboratory to be dried at 65 °C for 72 hours, being subsequently separated into fractions of leaves, twigs, reproductive parts and miscellaneous, and weighed to obtain the dry biomass. Litterbags were placed and tied close to the collectors to estimate the decomposition rate in order to evaluate the loss of dry biomass at 30, 60, 90, 120 and 150 days. After collection, the material was sent to the laboratory to be dried and weighed again. Total litter fall throughout the year reached 5.7 Mg.ha-1.yr-1 and the major amount of the material was collected from September till March. Leaves had the major contribution for total litter fall (72%), followed by twigs (14%), reproductive parts (11%) and miscellaneous (3%). Reproductive parts had a peak during the wet season. Positive correlation was observed between total litter and precipitation, temperature and radiation (r = 0.66, p<0.05; r = 0.76, p<0.05; r = 0.58, p<0.05, respectively). The multiple regression showed that precipitation and radiation contributed significantly to litter fall production. Decomposition rate was in the interval expected for secondary tropical forest and was correlated to rainfall. It was concluded that this fragment of secondary forest showed a seasonality effect driven mainly by precipitation and radiation, both important components of foliage renewal for the plant community and that decomposition was in an intermediate rate.

LITTERFALL ASSESSEMENT IN A FRAGMENT OF SECONDARY TROPICAL FOREST, IBIÚNA, SP, SOUTHEASTERN BRAZIL1

ABSTRACT The present study aimed to analyze the production and decomposition of litterfall in a fragment of secondary Atlantic forest in the region of Ibiúna, SP, from April 2012 to March 2013. The litterfall production was estimated by 30 collectors distributed randomly in an area of 1000 m2, where the deposited material was collected every 15 days. The decomposition of litterfall was estimated through the mass loss in the period of study. After collecting, the material was dried in an oven at 65 °C for seven days to achieve a constant weight. The decomposition constant k was obteined according to Shanks and Oslon (1961) and the time for 50% and 95% of decomposition was estimated. It was found a higher litterfall production in October (454.3 kg ha-1) and lower production in July (164.9 kg ha-1), with a total amount produced of 3.5 Mg ha-1 year-1. A delay of one month in the precipitation and relative humidity showed great influence in the litter production during the study. The decomposition rate (k) was 3.1 and the time to decompose 50% of the material was estimated in 2 and ½ months and for 95% of the litterfall the time was estimated in 11 and ½ months. The production and decomposition values of this work are within the range found in other sites of secondary tropical forests.

Soil water potential during different phenological phases of coffee irrigated by center pivot

Irrigation management can be established, considering the soil water potential, as the limiting factor for plant growth, assuming the soil water content between the field capacity and the permanent wilting point as available water for crops. Thus, the aim of this study was to establish the soil water potential interval during four different phenological phases of coffee irrigated by center pivot. The experiment was set at the experimental area of the Engineering Department at the Federal University of Lavras, in Brazil. The coffee variety planted is designated as Rubi, planted 0.8 meters apart, with rows spaced 3.5 meters apart. The treatments corresponded to the water depths applied based on different percentages of Kc and reference evapotranspiration (ET0) values. Sensors were used to measure the soil water potential interval, installed 25 centimeters depth. In order to compare the results, it was considered as the best matric potential the one that was balanced with the soil water content that resulted in the largest coffee productivity. Based on the obtained results, we verified that in the phases of fruit expansion and ripening, the best results were obtained, before the irrigations, when the soil water potential values reached -35 and -38 kPa, respectively. And in the flowering, small green and fruit expansion phases, when the values reached -31 and -32 kPa, respectively.

Pragmatic competence of Finnish learners of English: Meaning in interaction in secondary and upper secondary schools

Tutkin pro gradu -tutkielmassani englannin kielen oppijoiden pragmaattista kompetenssia. Tarkoitukseni oli selvittää, miten suomalaiset yläkoululaiset ja lukiolaiset osaavat käyttää englannin kieltä erilaisissa kommunikaatiotilanteissa. Tutkielmani voidaan sijoittaa välikielen pragmatiikan tutkimukseen. Halusin selvittää, millä tasolla suomalaisten oppijoiden pragmaattinen kompetenssi on ja kehittyykö se yläkoulun ja lukion välillä. Lisäksi tutkin, vaikuttavatko oppimisympäristö ja oppimismahdollisuudet oppijoiden kykyyn käyttää englannin kieltä. Toisin sanoen vertasin englantipainotteisilla luokilla olevia oppilaita formaalin opetuksen oppijoihin sekä tutkin, vaikuttavatko englanninkieliset vapaa-ajan aktiviteetit ja oppijoiden mahdolliset oleskelut englanninkielisissä maissa heidän pragmaattiseen kompetenssiinsa. Tutkimukseni kohderyhmä koostui yläkoulun kahdeksasluokkalaisista ja lukion toisen vuosikurssin opiskelijoista. Testasin neljä eri ryhmää, joissa oli sekä formaalissa opetuksessa olevia oppijoita (yksi ryhmä kahdeksasluokkalaisia ja yksi ryhmä toisen vuosikurssin opiskelijoita) että kielipainotteisten luokkien oppijoita (yksi ryhmä kahdeksasluokkalaisia ja yksi ryhmä toisen vuosikurssin opiskelijoita). Arvioin kohderyhmäni pragmaattista kompetenssia monivalintatestillä, jossa testattiin oppijoiden kykyä käyttää ja ymmärtää implikaatioita, tilannekohtaisia rutiineja sekä puheakteja. Taustakysymysten avulla selvitin, kuinka usein oppijat käyttivät englantia vapaa-aikanaan ja olivatko he vierailleet englanninkielisissä maissa. Tutkimustulokseni osoittavat, että suomalaisten yläkoululaisten ja lukiolaisten pragmaattinen kompetenssi oli korkea. Pragmaattinen kompetenssi kehittyi kahdeksasluokkalaisten ja lukion toisen vuosikurssin välillä. Kehitys oli suurempaa formaalissa opetuksessa kuin kielipainotteisilla luokilla. Englantipainotteisilla luokilla olevat oppilaat suoriutuivat testistä paremmin kuin formaalin opetuksen oppilaat. Tosin erot olivat tilastollisesti merkitseviä vain yläkoulussa. Tutkimuksessani siis päättelin, että vieraskielinen opetus vaikutti enemmän nuorempiin oppijoihin. Eri oppimismahdollisuudet osoittautuivat haastaviksi analysoida. Tulokset osoittivat, että vain englanninkielisessä maassa oleskelulla oli vaikutusta oppijoiden pragmaattiseen kompetenssiin. Kysyttäessä vapaa-ajan aktiviteettien merkitystä oppijat kuitenkin kertoivat, että ne auttoivat heitä testiin vastaamisessa enemmän kuin englanninopetuksessa käydyt asiat. Kouluissa tulisikin jatkossa painottaa yhä enemmän vuorovaikutteista kieltenopetusta.

Understanding the in vitro dissolution rate of glasses with respect to future clinical applications

Glass is a unique material with a long history. Several glass products are used daily in our everyday life, often unnoticed. Glass can be found not only in obvious applications such as tableware, windows, and light bulbs, but also in tennis rackets, windmill turbine blades, optical devices, and medical implants. The glasses used at present as implants are inorganic silica-based melt-derived compositions mainly for hard-tissue repair as bone graft substitute in dentistry and orthopedics. The degree of glass reactivity desired varies according to implantation situation and it is vital that the ion release from any glasses used in medical applications is controlled. Understanding the in vitro dissolution rate of glasses provides a first approximation of their behavior in vivo. Specific studies concerning dissolution properties of bioactive glasses have been relatively scarce and mostly concentrated to static condition studies. The motivation behind this work was to develop a simple and accurate method for quantifying the in vitro dissolution rate of highly different types of glass compositions with interest for future clinical applications. By combining information from various experimental conditions, a better knowledge of glass dissolution and the suitability of different glasses for different medical applications can be obtained. Thus, two traditional and one novel approach were utilized in this thesis to study glass dissolution. The chemical durability of silicate glasses was tested in water and TRIS-buffered solution at static and dynamic conditions. The traditional in vitro testing with a TRISbuffered solution under static conditions works well with bioactive or with readily dissolving glasses, and it is easy to follow the ion dissolution reactions. However, in the buffered solution no marked differences between the more durable glasses were observed. The hydrolytic resistance of the glasses was studied using the standard procedure ISO 719. The relative scale given by the standard failed to provide any relevant information when bioactive glasses were studied. However, the clear differences in the hydrolytic resistance values imply that the method could be used as a rapid test to get an overall idea of the biodegradability of glasses. The standard method combined with the ion concentration and pH measurements gives a better estimate of the hydrolytic resistance because of the high silicon amount released from a glass. A sensitive on-line analysis method utilizing inductively coupled plasma optical emission spectrometer and a flow-through micro-volume pH electrode was developed to study the initial dissolution of biocompatible glasses. This approach was found suitable for compositions within a large range of chemical durability. With this approach, the initial dissolution of all ions could be measured simultaneously and quantitatively, which gave a good overall idea of the initial dissolution rates for the individual ions and the dissolution mechanism. These types of results with glass dissolution were presented for the first time during the course of writing this thesis. Based on the initial dissolution patterns obtained with the novel approach using TRIS, the experimental glasses could be divided into four distinct categories. The initial dissolution patterns of glasses correlated well with the anticipated bioactivity. Moreover, the normalized surface-specific mass loss rates and the different in vivo models and the actual in vivo data correlated well. The results suggest that this type of approach can be used for prescreening the suitability of novel glass compositions for future clinical applications. Furthermore, the results shed light on the possible bioactivity of glasses. An additional goal in this thesis was to gain insight into the phase changes occurring during various heat treatments of glasses with three selected compositions. Engineering-type T-T-T curves for glasses 1-98 and 13-93 were stablished. The information gained is essential in manufacturing amorphous porous implants or for drawing of continuous fibers of the glasses. Although both glasses can be hot worked to amorphous products at carefully controlled conditions, 1-98 showed one magnitude greater nucleation and crystal growth rate than 13-93. Thus, 13-93 is better suited than 1-98 for working processes which require long residence times at high temperatures. It was also shown that amorphous and partially crystalline porous implants can be sintered from bioactive glass S53P4. Surface crystallization of S53P4, forming Na2O∙CaO∙2SiO2, was observed to start at 650°C. The secondary crystals of Na2Ca4(PO4)2SiO4, reported for the first time in this thesis, were detected at higher temperatures, from 850°C to 1000°C. The crystal phases formed affected the dissolution behavior of the implants in simulated body fluid. This study opens up new possibilities for using S53P4 to manufacture various structures, while tailoring their bioactivity by controlling the proportions of the different phases. The results obtained in this thesis give valuable additional information and tools to the state of the art for designing glasses with respect to future clinical applications. With the knowledge gained we can identify different dissolution patters and use this information to improve the tuning of glass compositions. In addition, the novel online analysis approach provides an excellent opportunity to further enhance our knowledge of glass behavior in simulated body conditions.

Understanding and improving quality of secondary school education : conceptions among teachers in Tanzania

Temat för studien handlar om gymnasielärares uppfattningar om kvalitet och om hur kvalitet kan utvecklas i gymnasieutbildningen in Tanzania. Studien är till sin karaktär kvalitativ och består av utprövade semistrukturerade intervjuer med sammanlagt trettio lärare som arbetar i fyra gymnasieskolor både i urbana och rurala miljöer. Lärarna har varierande arbetserfarenhet och undervisar i olika ämnen. Huvudfokus har gällt identifieringen av variationer i lärares uppfattningar om kvalitet. På basen av två forskningsfrågor avslöjar analysen uppfattningar av hur lärare förstår och önskar utveckla kvaliteten på gymnasieutbildningen. Resultaten visar att lärare förstår kvaliteten på utbildningen i sina skolor som försök att möta skolans och samhällets mål, som individuella prestationer och förmågor som att inneha kompetenser och som att möta utmaningar inom utbildning, Identifierade uppfattningar var baserade på lärarnas personliga kunskap, arbetsmiljön och varierande omständigheter som rådde i deras skolor. Uppfattningar om en förbättring av kvaliteten i gymnasieutbildningen innefattade utveckling av lärares motivation, skolmiljön, arbetet i klassrum, kvaliteten på lärares kunskaper och färdigheter och undervisningsmaterial. Ambitionen bakom studien ar att erbjuda en plattform för strategier för att förbättra kvaliteten på gymnasieutbildningen. Resultaten strävar till att ge en fördjupad insikt i uppfattningar hos en utvald grupp av lärare som arbetar under samma villkor inom gymnasieskolor I Tanzania. Av den här anledningen är den genererade kunskapen därför relevant för att belysa lärares uppfattningar även utanför den studerade gruppen av respondenter.

Comparison of Classical and Secondary Cytologic Criteria Relative to Hybrid Capture for Diagnosing Cervical-vaginal Infection by Human Papillomavirus

Objective To compare the diagnostic accuracy of the classic Meisels cytologic criteria and the Schneider secondary criteria relative to the hybrid capture method for diagnosing HPV infection. Methods This was a retrospective study performed at a public university hospital. A total of 41 patients with a cytologic diagnosis of HPV infection and 40 HPV-negative patients were selected for review of the cervical-vaginal smears seeking to classical and secondary criteria. A single pathologist reviewed the slides in search of the criteria. The classical and secondary cytologic criteria were compared with the hybrid capture for diagnosing HPV infection. Bartleti test was applied for the age analysis, and Fisher's exact test was used to compare proportions. The tests were considered significant when the probability of rejecting the null hypothesis was less than 5% (p < 0.05). Results The Meisels criteria were less sensitive (34.0%) than the secondary Schneider criteria (57.5%) when compared with the hybrid capture (p < 0.0001), although the specificity of the former criteria was non-significantly higher (91.2% and 67.7%, respectively). In cases of moderate or intense inflammation, the sensitivity and specificity of the Schneider criteria were decreased, 33.3% and 50.0% respectively (p = 0.0115). Conclusions Compared with hybrid capture for diagnosis of HPV infection, the sensitivity of the secondary Schneider criteria was higher than the classical Meisels criteria.Moderate or intense inflammation reduces the sensitivity and specificity of the secondary Schneider criteria for diagnosing HPV infection using the hybrid capture as the gold standard.

Simulerade skoldilemman : redskap för utveckling av reflektionsförmåga?

Syftet med avhandlingen är att studera lärarstuderandes samtal om simulerad skolverksamhet för att söka förstå möjligheter och begränsningar med simulerade dilemman som medierande redskap för reflektion över lärares arbete. Undersökningen är genomförd under seminarier i svensk och finländsk lärarutbildning. Forskningsprocessen består av tre faser; en konstruktionsfas, en prövningsfas och en undersökningsfas. Under konstruktionsfasen producerades simuleringar på basen av en narrativ analys av semistrukturerade intervjuer med nyutbildade lärare. Simuleringarna testades med lärare och lärarstuderande i prövningsfasen. I undersökningsfasen utarbetades reflektionsfrågor och studiens empiriska data samlades in genom videoobservation. Totalt femton samtal filmades vid fem seminarier och tre olika lärosäten, två i Sverige och ett i Svenskfinland. De studerande som förekommer i datamaterialet befann sig i början, mitten och i slutet av sin lärarutbildning. Analysen bygger på Schöns olika reflektionsbegrepp och ett sociokulturellt perspektiv som bygger på den ryska kulturhistoriska skolan. Resultaten visar att de studerande engagerade sig starkt i samtalen i de flesta fall och att engagemanget var relaterat till deras uppfattningar om simuleringens autenticitet. Simuleringarna och reflektionsfrågorna användes både som sekundära och tertiära artefakter. Bland simuleringarnas modaliteter framstod ljudet som den viktigaste för nyanser av förståelse och engagemang och reflektionsfrågorna fungerade som kommunikativt stöd och strukturell scaffolding. När de studerande använde simuleringen för dekontextualisering i en öppen dialog förekom en tertiär dialog, i vilken förhandling av ny mening ägde rum. Kreativ reflektion – att se dilemmat ur olika perspektiv och reciprok reflektion – öppen utmanande dialog förekom flitigt i vilka en didaktiskanalytisk praktikgemenskap skapades. Slutsatserna är att simulerade skoldilemman kan utgöra en potential för lärarstuderandes utveckling av reflektionsförmåga när de används i mindre samtalsgrupper och den didaktiska inramningen relateras till aktuellt kursinnehåll. Om simuleringens innehåll inte upplevs som autentiskt finns dock risk för att förutfattade meningar om lärares arbete förstärks om de inte utmanas av medstuderande eller lärarutbildare.

Density of primary and secondary epidermal laminae of equine hoof

Differences in the microscopic morphology of the hoof in forelimbs and hindlimbs of horses have been scarcely reported in the literature, especially concerning the distribution of primary and secondary epidermal laminae in the different regions. This study aimed to determine the density of primary and secondary epidermal laminae in the hoof of horses. For this, it was used fore and hindlimbs of 16 adult mixed breed horses. With a cross section 0.5 cm above the sole, it was quantified the primary epidermal laminae in the regions of the toe, and of lateral and medial quarters. Fragments with about 1cm ³ were taken from the proximal, middle and distal thirds of the hooves, in the different regions, subjected to conventional histological techniques and examined with an optical microscope. Data were statistically analyzed in relation to the fore and hindlimbs and between their various regions. The density of primary epidermal laminae varied around the hoof circumference, with greater values in the hoof toe, which gradually decreased towards the bulb of the hoof, without difference between thoracic and pelvic limbs. The average density of the secondary epidermal laminae per primary epidermal lamina does not change around the circumference of the hoof. Our findings indicated that the density of epidermal laminae is not different between fore and hindlimbs. The variation in the density of primary epidermal laminae around the hoof seems to be part of an adaptive response to different stresses in each region. A better understanding of the structural morphology contributes to a better understanding of the diagnosis, pathophysiology, and treatment of disorders that affect the hoof.

Morphometry of primary and secondary epidermal laminae in equine hoof

We studied the length of primary and secondary epidermal laminae of the toe and the lateral and medial quarters of horses, distributed into proximal, middle and distal thirds of the hooves. Eight limbs from adult crossbred horses, four females and four males, used to pull carts without pedal conditions. Fragments were taken from different regions of the hooves and subjected to conventional histological techniques. The samples were stained with hematoxylin-eosin and analyzed by light microscopy. The primary epidermal laminae were higher in the hooves of forelimbs compared to hindlimbs in the proximal and middle thirds and the regions of the medial quarter and toe. The secondary laminae were higher in forelimb of the middle third and medial quarter. Comparing the length of the epidermal laminae between hoof parts, it was seen that the primary laminae are lower in the proximal third and higher in the toe, while the secondary laminae are lower in the proximal third and medial quarter. The results suggested that the morphology of the laminae in the different regions of the hooves is influenced through the work performed by the animal, as well as through the different distribution of forces.

Hydrometallurgical recovery of valuable metals from secondary raw materials

Wastes and side streams in the mining industry and different anthropogenic wastes often contain valuable metals in such concentrations their recovery may be economically viable. These raw materials are collectively called secondary raw materials. The recovery of metals from these materials is also environmentally favorable, since many of the metals, for example heavy metals, are hazardous to the environment. This has been noticed in legislative bodies, and strict regulations for handling both mining and anthropogenic wastes have been developed, mainly in the last decade. In the mining and metallurgy industry, important secondary raw materials include, for example, steelmaking dusts (recoverable metals e.g. Zn and Mo), zinc plant residues (Ag, Au, Ga, Ge, In) and waste slurry from Bayer process alumina production (Ga, REE, Ti, V). From anthropogenic wastes, waste electrical and electronic equipment (WEEE), among them LCD screens and fluorescent lamps, are clearly the most important from a metals recovery point of view. Metals that are commonly recovered from WEEE include, for example, Ag, Au, Cu, Pd and Pt. In LCD screens indium, and in fluorescent lamps, REEs, are possible target metals. Hydrometallurgical processing routes are highly suitable for the treatment of complex and/or low grade raw materials, as secondary raw materials often are. These solid or liquid raw materials often contain large amounts of base metals, for example. Thus, in order to recover valuable metals, with small concentrations, highly selective separation methods, such as hydrometallurgical routes, are needed. In addition, hydrometallurgical processes are also seen as more environmental friendly, and they have lower energy consumption, when compared to pyrometallurgical processes. In this thesis, solvent extraction and ion exchange are the most important hydrometallurgical separation methods studied. Solvent extraction is a mainstream unit operation in the metallurgical industry for all kinds of metals, but for ion exchange, practical applications are not as widespread. However, ion exchange is known to be particularly suitable for dilute feed solutions and complex separation tasks, which makes it a viable option, especially for processing secondary raw materials. Recovering valuable metals was studied with five different raw materials, which included liquid and solid side streams from metallurgical industries and WEEE. Recovery of high purity (99.7%) In, from LCD screens, was achieved by leaching with H2SO4, extracting In and Sn to D2EHPA, and selectively stripping In to HCl. In was also concentrated in the solvent extraction stage from 44 mg/L to 6.5 g/L. Ge was recovered as a side product from two different base metal process liquors with Nmethylglucamine functional chelating ion exchange resin (IRA-743). Based on equilibrium and dynamic modeling, a mechanism for this moderately complex adsorption process was suggested. Eu and Y were leached with high yields (91 and 83%) by 2 M H2SO4 from a fluorescent lamp precipitate of waste treatment plant. The waste also contained significant amounts of other REEs such as Gd and Tb, but these were not leached with common mineral acids in ambient conditions. Zn was selectively leached over Fe from steelmaking dusts with a controlled acidic leaching method, in which the pH did not go below, but was held close as possible to, 3. Mo was also present in the other studied dust, and was leached with pure water more effectively than with the acidic methods. Good yield and selectivity in the solvent extraction of Zn was achieved by D2EHPA. However, Fe needs to be eliminated in advance, either by the controlled leaching method or, for example, by precipitation. 100% Pure Mo/Cr product was achieved with quaternary ammonium salt (Aliquat 336) directly from the water leachate, without pH adjustment (pH 13.7). A Mo/Cr mixture was also obtained from H2SO4 leachates with hydroxyoxime LIX 84-I and trioctylamine (TOA), but the purities were 70% at most. However with Aliquat 336, again an over 99% pure mixture was obtained. High selectivity for Mo over Cr was not achieved with any of the studied reagents. Ag-NaCl solution was purified from divalent impurity metals by aminomethylphosphonium functional Lewatit TP-260 ion exchange resin. A novel preconditioning method, named controlled partial neutralization, with conjugate bases of weak organic acids, was used to control the pH in the column to avoid capacity losses or precipitations. Counter-current SMB was shown to be a better process configuration than either batch column operation or the cross-current operation conventionally used in the metallurgical industry. The raw materials used in this thesis were also evaluated from an economic point of view, and the precipitate from a waste fluorescent lamp treatment process was clearly shown to be the most promising.

Muutos kuntaorganisaatiossa - tapaustutkimus erään kunnan teknisestä toimialasta

Kuntaorganisaatioiden muutokset ovat tulleet Suomessa runsaan parinkymmenen vuoden aikana yhä välttämättömämmiksi sekä globaalien että kansallisten toimintaympäristöjen muuttumisen vuoksi. Niitä tehtäessä on kuitenkin kohdattu suuria vaikeuksia jo muutosprosessien alussa, suunnittelu- ja päätöksentekovaiheessa. Keskityttäessä organisaatiomuutosten tavoitteisiin ja lopputulokseen ovat keinot niihin pääsemiseksi jääneet vaille riittävää huomiota. Tämän väitöskirjatutkimuksen päätavoite on selvittää syitä, jotka edistävät ja haittaavat kuntaorganisaation muutosprosessia. Sekundäärisenä tavoitteena on tarkastella motivaation, toimintakulttuurin, poliittisten ja ideologisten eroavaisuuksien sekä arvojen ja asenteiden vaikutusta muutosprosessiin sen eri vaiheissa sekä erilaisissa olosuhteissa. Tutkimuksessa käytetään kvalitatiivista tutkimusmenetelmää, joka tukeutuu erään kunnan teknisen toimialan muutosprosessiin. Tutkimuksen kohteena olevana ajanjaksona sekä vakaassa että muuttuvassa toimintaympäristössä ovat tuon kunnan teknisen toimialan organisaatiomuotoina olleet virasto, liikelaitos, osakeyhtiö ja toimintojen ulkoistaminen. Empiirisen aineiston sekä niin kansallisten kuin kansainvälisten tutkimusten perusteella pyritään löytämään muutosprosessia vaikeuttavia tekijöitä sekä keinoja vaikuttaa prosessin onnistumiseen. Tapaustutkimuksen aineistona ovat tarkastellun kunnan organisaatiomuutoksia koskevat dokumentit. Niitä on täydennetty haastattelemalla henkilöitä, jotka ovat joko suoraan vaikuttaneet muutokseen tai ainakin olleet siinä kiinteästi mukana. Muutosprosessiin liittyviä haasteita lähestytään prosessitutkimuksen avulla pyrkien selvittämään erilaiset kriittiset tapahtumat ja käännekohdat, syy-yhteydet sekä mahdolliset muutoksia suuntaavat mallit. Vaikka muutoksiin vaikuttavat tekijät ovat tämän tutkimuksen tulosten perusteella pääosin samat kuin mitä on havaittu kansainvälisissä tutkimuksissa, liittyy niihin kuitenkin tutkimuksen tapauskohteessa kansallisia ja osittain paikallisiakin erityispiirteitä. On havaittavissa sekä kansallisten ominaispiirteiden että pohjoismaisen hyvinvointiyhteiskunnan ihanteen vaikutusta ihmisten suhtautumisessa muutosprosessiin sekä käyttäytymiseen sen aikana. Tämän tutkimuksen valossa avoimuus ja oikeudenmukaisuus ovat vahvimmin vaikuttavia tekijöitä kuntaorganisaation muutoksessa. Tämän tutkimuksen teoriatarkastelu pohjautuu tutkimuksiin, jotka ovat kohdistuneet muutosprosesseihin yleensä niin julkishallinnon kuin yksityissektorin organisaatioissa. Vaikka tämän väitöskirjan tutkimuksen fokus on kuntasektorilla, ovat sen tulokset suurelta osin sovellettavissa myös yksityissektorille.

Primary and secondary development of Cyperus giganteus Vahl rhizome (Cyperaceae)

In Cyperus giganteus, like in other Monocotyledoneae, the protoderm, procambium, fundamental meristem and primary thickening meristem (PTM) are differentiated from the rhizome promeristem. The PTM produces the inner cortical parenchyma, endodermis, pericycle and amphivasal vascular bundles, which are formed by the procambium too. After the primary body differentiates, cellular divisions continue only in the pericycle, and originate an irregular vascular system with vessel elements shorter and more branched than those found in the primary growth. This change of activity in the pericycle defines a secondary growth, where the secondary thickening meristem (STM) is the pericycle itself.

Meristematic endodermis and secretory structures in adventitious roots of Richterago Kuntze (Mutisieae-Asteraceae)

The meristematic endodermis in adventitious roots of Richterago species originates in one of the fundamental meristem cells, which undergo sucessive anticlinal and periclinal divisions to build the inner cortex. The meristematic endodermis or proendodermis remains as a meristematic layer until its differentiation into endodermis, with Casparian strip. When sieve elements differentiate, endodermic secretory canals of esquizogenous origin are present at the region adjacent to primary phloem. Articulated laticifers, with cells perforated at both terminal and transversal walls, also occur during initial phases of secondary development. Presence of inulin as reserve carbohydrate in the inner cortex and vascular tissue may be related to abiotic factors, as an adaptive strategy of these species.