ESTIMATIVAS DAS PROPRIEDADES FÍSICO-MECÂNICAS DE COMPOSTOS LVL CONFECCIONADOS COM PARICÁ POR MEIO DE ULTRASSOM

No presente estudo buscou-se avaliar as propriedades físicas e mecânicas de compostos LVL produzidos com a madeira de paricá ( Schizolobium amazonicum Huber ex. Ducke) por meio do ultrassom. Para isso, foram utilizados LVL produzidos em laboratório e destes retiradas amostras para realização dos ensaios não destrutivos. Posteriormente, as mesmas amostras foram destinadas para realização dos ensaios físicos (absorção de água; inchamento em espessura e inchamento residual) ou mecânicos (resistência e rigidez à flexão estática flatwise; resistência e rigidez à flexão estática edgewise; resistência à compressão paralela e resistência ao cisalhamento paralelo e perpendicular). Os dados da velocidade de propagação de ondas e do módulo de elasticidade dinâmico obtidos nos ensaios não destrutivos foram utilizados no ajuste de equações para estimar as propriedades avaliadas. Os resultados obtidos apontaram o uso do ultrassom como uma ferramenta eficaz para a predição da maior parte das propriedades avaliadas. Dentre as variáveis independentes avaliadas, o módulo de elasticidade dinâmico obteve os melhores resultados quando comparado à velocidade de propagação das ondas.

El dolor en la enfermedad de Parkinson. Implicaciones autonómicas y afectivas

Introducción y objetivo: La enfermedad de Parkinson (EP) es una enfermedad neurodegenerativa, la segunda con mayor prevalencia, después de la enfermedad de Alzheimer (EA). La enfermedad presenta tanto síntomas motores como “no motores”, entre los que se encuentra disfunción autonómica, dolor, deterioro cognitivo, ansiedad, depresión, entre otros. El dolor en la EP, a pesar de su frecuencia, sigue siendo un síntoma infravalorado, infradiagnosticado e infratratado. Nuestro objetivo principal es evaluar la frecuencia y configuración del dolor en la EP y sus implicaciones afectivas y autonómicas. Pacientes, material y métodos: Estudio multicéntrico, transversal, de carácter retrospectivo y prospectivo. Se incluyeron 407 pacientes con enfermedad de Parkinson (EP) de los que un 70% estaban en una situación leve-moderada (estadios 2 o 3 de Hoehn y Yahr), con edad media de 65,01 años y 7,07 años de duración de la EP. Se administraron las escalas SCOPA-Motor, SCOPA-Autonómica, SCOPA-Cog, Parkinson’s Psychosis Rating Scale modificada, Hoehn & Yarh, las Escala Hospitalaria de Ansiedad y Depresión, Dolor (EVA frecuencia), EQ-5D y estudios neurofisiológicos específicos de Sistema Nervioso Autónomo (SNA). El análisis estadístico se ha realizado con el programa de cálculo estadístico SPSS versión 22. Resultados: En nuestro estudio encontramos una prevalencia del dolor elevada (72%) y los pacientes afirman mayoritariamente (79,2%) que su dolor tiene relación con la EP. La duración de la enfermedad se correlaciona con la intensidad y frecuencia del dolor (dolor intensidad: r: 0,138; p< 0,01; dolor frecuencia: r: 0,168; p< 0,01 ). A mayor evolución de la EP mayor es la percepción del dolor. El 60% de los pacientes de EP manifiestan sentir dolor cuando aparecen episodios de rigidez y tirantez en alguno de los miembros superiores o inferiores frente a un 40% que no. Curiosamente un número mayor (el 76% de los pacientes) siente dolor durante los episodios de discinesias frente a un 24% que no lo percibe. Sin embargo, en la EP el dolor se relaciona más con la situación afectiva que con la motora, como hemos podido demostrar la relación entre el Dolor Total y la HADS (Depresión) Total y la Escala Hoehn & Yahr. El coeficiente de contingencia es mayor en la depresión (C: 0,894; N=403) que en la situación motora (C: 0,637; N=401). El dolor evoluciona y se percibe de forma paralela a otros síntomas no motores (ánimo, nicturia, alteración del control vesical, estreñimiento, etc.) pero con lo que se relaciona más es con la situación afectiva del paciente parkinsoniano (ansiedad (r: 0,40; p < 0,01), depresión (r: 0.28; p < 0,01). La mayor asociación se encuentra entre la ansiedad y el dolor, seguida de la depresión y en menor grado nicturia y sialorrea. Existe una correlación positiva entre las dos subescalas de la HADS (depresión y ansiedad). Existe una alta prevalencia de alteración de la memoria inmediata como síntoma “no motor” (SNM) en nuestra serie (96,5%). En base a nuestros resultados el sexo femenino se asocia al dolor en la EP. Con respecto a la fenomenología el dolor en la EP es muy variable. Se percibe con mayor frecuencia como una corriente eléctrica (64%), calor (60%), frialdad (60%), punzante (52%), difuso (52%), interno (40%), acorchamiento u hormigueo (40%), La frecuencia de la cantidad de tipos de dolor es la siguiente: un tipo de dolor (12%), dos tipos de dolores (16%) y tres tipos de dolores (72%). La media de tipos de dolor en nuestro estudio es superior a 2 tipos (x ̅: 2,60 ± 0,63; rango: 1-3). En los casos que toman levodopa les sigue unas tres cuartas partes que lo perciben como palpitante, tirante, punzante. En los casos que toman agonista dopaminérgico lo perciben en un 75% como adormecimiento, interno, descarga eléctrica, frialdad y calor. El dolor en la EP respecto a su configuración es multimodal. Los parámetros neurofisiológicos están relacionados con los umbrales de dolor. La actividad simpática y la sensibilidad nociceptiva están disminuidas en la EP. Los enfermos con EP tienen un umbral menor para el frío según los datos del estudio del Cold-Ice. En lo referente a la terapéutica el tratamiento dopaminérgico es eficaz para el control del dolor en el 48% de los pacientes mientras que el tratamiento analgésico estándar prescrito mejora el dolor en un 78,8%. Por último, casi la mitad de la población de nuestro estudio (47,52%) evaluada con la EQ-5D tiene problemas en alguna de las dimensiones de la calidad de vida. Hay una relación positiva entre la escala analógica visual del dolor (EVA) y la EQ-5D que evalúa la CVRS y entre la intensidad de dolor y la CVRS (r:-0,298; p < 0,01). Es decir, una mayor vivencia de dolor empeora la CVRS del paciente con EP. Conclusiones: En la enfermedad de Parkinson el dolor es un síntoma no motor de elevada prevalencia, íntimamente relacionado con la afectación de los sistemas afectivos y autonómicos medido con test neuro-vegetativos específicos. El presente estudio confirma su relación con el lado más afecto de la enfermedad, las fluctuaciones motoras, el tiempo de evolución, con la situación anímica (depresión y ansiedad) y con el sexo femenino, así como su carácter multimodal y gran variedad de expresión sintomática. Es muy llamativa su asociación con el déficit mnésico. Por último esta vivencia repercute en forma llamativa en la calidad de vida relacionada con la salud por lo que sería importante conocer y manejar mejor estos aspectos de la enfermedad de Parkinson.

Avaliação do desempenho de fundações em edificação no DF com a utilização de técnicas de interação solo-estrutura

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2015.

Algoritmos de otimização e o problema inverso aplicados à identificação de danos estruturais com o uso do MEF

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2015.

Axial buckling load of partially encased columns under fire

Partially encased columns have significant fire resistant. However, it is not possible to assess the fire resistance of such members simply by considering the temperature of the steel. The presence of concrete increases the mass and thermal inertia of the member and the variation of temperature within the cross section, in both the steel and concrete components. The annex G of EN1994-1-2 allows to calculate the load carrying capacity of partially encased columns, for a specific fire rating time, considering the balanced summation method. New formulas will be used to calculate the plastic resistance to axial compression and the effective flexural stiffness. These two parameters are used to calculate the buckling resistance. The finite element method is used to compare the results of the elastic critical load for different fire ratings of 30 and 60 minutes. The buckling resistance is also calculated by the finite element method, using an incremental and iterative procedure. This buckling resistance is also compared with the simple calculation method, evaluating the design buckling curve that best fits the results.

Relações de cooperação em consórcios públicos de regiões metropolitanas: análises do CONDIAM/PB e consórcio grande Recife

With the disorganized decentralization occurred in Brazil after the 1988 Constitution, municipalities have risen to the level of federal entities. This phenomenon became known as "municipalism" also brought some negative effects such as low capacity financial, economic and political of these entities. In the face of this reality , the municipalities sought in models of collaborative features to address public policy issues ultrarregionais, one of these models are the Public Consortia. Characterized as the organization of all federal entities that aim to solve public policy implementation alone that they could not, or spend great resources for such. This reality of the municipalities have an aggravating factor when looking at the situation in Metropolitan Regions (MRs). This is because the RMs has a historical process of formation that does not encourage cooperation, since that were created top-down during the military regime. Furthermore, the metropolitan municipalities have significant power asymmetries, localist vision, rigidity earmarked revenues, different scenarios conurbation, difficulty standardization of concepts and others that contribute to the vision of low cooperation of these metropolitan areas. Thus, the problem of this work is in the presence of collaborative arrangements, such as the Public Consortia in metropolitan areas, which are seen as areas of low cooperation. To elucidate this research was used for analysis the cases of CONDIAM/PB and Consórcio Grande Recife/PE, because they are apparently antagonistic, but with some points of similarity. The cases has as foundation the Theory of Common Resources, which provides the possibility of collective action through the initiative of individuals. This theory has as its methodology for analyzing the picture IAD Framework, which proposes its analysis based on three axes: external variables, the arena of action and results. The nature of the method of this research was classified as exploratory and descriptive. For the stage of date analysis, was used the method of document analysis and content, Further than of separation of the cases according to theur especificities. At the end of the study, noted that the CONDIAM/PB was a strategy of municipal government of Joao Pessoa to attract funds from the Federal Government for the purpose of to build a landfill, and over the years the ideology of cooperation was left aside, the prevailing view localist municipalities. In the case of Consórcio Grande Recife/PE, members act with some degree of cooperation, especially the collaborative aspect of the region, however, still prevails with greater strength the power of the state of Pernambuco in the decisions and paths of the consortium. Thus, was conclude that the Public Consortia analyzed are an experience of collaborative arrangement, from the initiative of members, as the theory of common resources says, but has not actually signed as a practice of collective action to overcome the dilemmas faced by metropolitan areas

Análise experimental do comportamento à flexão e ligação entre painéis de lajes tipo bubbledeck

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Otimização e análise mecânica de pastas geopoliméricas para uso em poços sujeitos à injeção cíclica de vapor

Oil wells subjected to cyclic steam injection present important challenges for the development of well cementing systems, mainly due to tensile stresses caused by thermal gradients during its useful life. Cement sheath failures in wells using conventional high compressive strength systems lead to the use of cement systems that are more flexible and/or ductile, with emphasis on Portland cement systems with latex addition. Recent research efforts have presented geopolymeric systems as alternatives. These cementing systems are based on alkaline activation of amorphous aluminosilicates such as metakaolin or fly ash and display advantageous properties such as high compressive strength, fast setting and thermal stability. Basic geopolymeric formulations can be found in the literature, which meet basic oil industry specifications such as rheology, compressive strength and thickening time. In this work, new geopolymeric formulations were developed, based on metakaolin, potassium silicate, potassium hydroxide, silica fume and mineral fiber, using the state of the art in chemical composition, mixture modeling and additivation to optimize the most relevant properties for oil well cementing. Starting from molar ratios considered ideal in the literature (SiO2/Al2O3 = 3.8 e K2O/Al2O3 = 1.0), a study of dry mixtures was performed,based on the compressive packing model, resulting in an optimal volume of 6% for the added solid material. This material (silica fume and mineral fiber) works both as an additional silica source (in the case of silica fume) and as mechanical reinforcement, especially in the case of mineral fiber, which incremented the tensile strength. The first triaxial mechanical study of this class of materials was performed. For comparison, a mechanical study of conventional latex-based cementing systems was also carried out. Regardless of differences in the failure mode (brittle for geopolymers, ductile for latex-based systems), the superior uniaxial compressive strength (37 MPa for the geopolymeric slurry P5 versus 18 MPa for the conventional slurry P2), similar triaxial behavior (friction angle 21° for P5 and P2) and lower stifness (in the elastic region 5.1 GPa for P5 versus 6.8 GPa for P2) of the geopolymeric systems allowed them to withstand a similar amount of mechanical energy (155 kJ/m3 for P5 versus 208 kJ/m3 for P2), noting that geopolymers work in the elastic regime, without the microcracking present in the case of latex-based systems. Therefore, the geopolymers studied on this work must be designed for application in the elastic region to avoid brittle failure. Finally, the tensile strength of geopolymers is originally poor (1.3 MPa for the geopolymeric slurry P3) due to its brittle structure. However, after additivation with mineral fiber, the tensile strength became equivalent to that of latex-based systems (2.3 MPa for P5 and 2.1 MPa for P2). The technical viability of conventional and proposed formulations was evaluated for the whole well life, including stresses due to cyclic steam injection. This analysis was performed using finite element-based simulation software. It was verified that conventional slurries are viable up to 204ºF (400ºC) and geopolymeric slurries are viable above 500ºF (260ºC)

Currículo universitário: da geometria cartesiana à relatividade einsteiniana

A dimensão das questões curriculares, no ensino superior universitário, transcende, cada vez mais, os tradicionais, mas de crescente complexidade, campos do ensino e da aprendizagem. Na Universidade, para além de se ensinar e aprender, também se vive. Vive-se um dos períodos mais marcantes das vidas de cada um: a época em que se é jovem adulto. A uma organização curricular, institucionalmente ortodoxa, baseada na rigidez dos planos de estudo, dos horários e locais de trabalho e dos conhecimentos a adquirir, contrapõe-se, cada vez mais, uma procura personalizada de produtos educativos personalizados, flexíveis e adaptáveis às características, necessidades e contextos de quem os procura. O design curricular, no âmbito universitário, deverá caminhar no sentido da decrescente rigidez organizacional e da crescente flexibilidade (conferindo maior possibilidade de escolha do que se quer aprender) nunca abdicando das necessárias condições uniformizadas de certificação, que se constituem uma condição indispensável para o reconhecimento académico, profissional e social da formação recebida e/ou construída na Universidade. A presente comunicação pretende dar um contributo para a necessária reflexão que urge fazer sobre a missão da Universidade dos nossos dias.

Obtenção de uma porcelana dielétrica a partir de matérias-primas do Rio Grande do Norte

The dielectric porcelain is usually obtained by mixing various raw materials proportions and is used in the production of electronic equipment for various applications, from capacitors of high and low Power to insulators for low, medium, high and extra high voltage, which are used in distribution lines and transmission of electricity.This work was directed to the s tudy of technological properties of technic porcelain, made from raw materials extracted from pegmatites found in the regions of Seridó and the Alto Oeste of Rio Grande do Norte, which are made of kaolin, quartz and feldspar, abundant and high quality in these regions. The technic ceramics were obtained by mixing in appropriate levels, kaolin, feldspar, quartz and clay, the last item from a pottery in the city of Sao Gonçalo do Amarante, Rio Grande do Norte. During the development the following characterizations correlated to raw materials were made: laser particle sizing, x-ray diffraction, DTA and TG. The compositions studied were formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150 to 1350ºC and levels (times) of sintering between 30, 60, 90 and 120 minutes. The characterization of the samples were taken from the analysis of weight loss, linear shrinkage, porosity, stoneware curve, bulk density, flexural strength of three points, SEM and X-ray diffraction, TMA, Dielectric and cross Resistivity. The studied materials can be employed in producing the objects used in electrical engineering such as: insulators for low, medium and high-voltage electrical systems, command devices, bushing insulation for transformers, power capacitors, spark plugs, receptacles for fluorescent and incandescent light bulbs and others

Fabricación y caracterización físico-mecánica de biocomposites reforzados con fibras naturales. Aplicaciones en el sector náutico.

156 p.

A doença de Parkinson e as suas implicações na saúde oral

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Simulador radiográfico antropomórfico de mama humana

Mammography is a diagnostic imaging method in which interpretation depends on knowledge of radiological aspects as well as the clinical exam and pathophysiology of breast diseases. In this work a mammography phantom was developed to be used for training in the operation of mammographic x-ray equipment, image quality evaluation, self-examination and clinical examination of palpation. Polyurethane was used for the production of the phantoms for its physical and chemical properties and because it is one of the components normally used in prostheses. According to the range of flexibility of the polyurethane, it was possible to simulate breasts with higher or lower amount of adipose tissue. Pathologies such as areolar necrosis and tissue rejection due to surgery reconstruction after partial mastectomy were also simulated. Calcifications and nodules were simulated using the following materials: polyethylene, poly (methyl methacrylate), polyamide, polyurethane and poly (dimethyl silicone). Among these, polyethylene was able to simulate characteristics of calcification as well as breast nodules. The results from mammographic techniques used in this paper for the evaluation of the phantoms are in agreement with data found in the literature. The image analyses of four phantoms indicated significant similarities with the human skin texture and the female breast parenchyma. It was possible to detect in the radiographic images produced regions of high and low radiographic optical density, which are characteristic of breasts with regions of different amount of adipose tissue. The stiffnesses of breast phantoms were adjusted according to the formulation of the polyurethane which enabled the production of phantoms with distinct radiographic features and texture similar to human female breast parenchyma. Clinical palpation exam of the phantoms developed in this work indicated characteristics similar to human breast in skin texture, areolar region and parenchyma

Design gráfico alternativo

Dissertação de Mestrado para obtenção do grau de Mestre em Design de Comunicação, apresentada na Universidade de Lisboa - Faculdade de Arquitectura