932 resultados para multiplicity of solutions
Resumo:
In this work, the Markov chain will be the tool used in the modeling and analysis of convergence of the genetic algorithm, both the standard version as for the other versions that allows the genetic algorithm. In addition, we intend to compare the performance of the standard version with the fuzzy version, believing that this version gives the genetic algorithm a great ability to find a global optimum, own the global optimization algorithms. The choice of this algorithm is due to the fact that it has become, over the past thirty yares, one of the more importan tool used to find a solution of de optimization problem. This choice is due to its effectiveness in finding a good quality solution to the problem, considering that the knowledge of a good quality solution becomes acceptable given that there may not be another algorithm able to get the optimal solution for many of these problems. However, this algorithm can be set, taking into account, that it is not only dependent on how the problem is represented as but also some of the operators are defined, to the standard version of this, when the parameters are kept fixed, to their versions with variables parameters. Therefore to achieve good performance with the aforementioned algorithm is necessary that it has an adequate criterion in the choice of its parameters, especially the rate of mutation and crossover rate or even the size of the population. It is important to remember that those implementations in which parameters are kept fixed throughout the execution, the modeling algorithm by Markov chain results in a homogeneous chain and when it allows the variation of parameters during the execution, the Markov chain that models becomes be non - homogeneous. Therefore, in an attempt to improve the algorithm performance, few studies have tried to make the setting of the parameters through strategies that capture the intrinsic characteristics of the problem. These characteristics are extracted from the present state of execution, in order to identify and preserve a pattern related to a solution of good quality and at the same time that standard discarding of low quality. Strategies for feature extraction can either use precise techniques as fuzzy techniques, in the latter case being made through a fuzzy controller. A Markov chain is used for modeling and convergence analysis of the algorithm, both in its standard version as for the other. In order to evaluate the performance of a non-homogeneous algorithm tests will be applied to compare the standard fuzzy algorithm with the genetic algorithm, and the rate of change adjusted by a fuzzy controller. To do so, pick up optimization problems whose number of solutions varies exponentially with the number of variables
Resumo:
The processing of materials through plasma has been growing enough in the last times in several technological applications, more specifically in surfaces treatment. That growth is due, mainly, to the great applicability of plasmas as energy source, where it assumes behavior thermal, chemical and/or physical. On the other hand, the multiplicity of simultaneous physical effects (thermal, chemical and physical interactions) present in plasmas increases the complexity for understanding their interaction with solids. In that sense, as an initial step for the development of that subject, the present work treats of the computational simulation of the heating and cooling processes of steel and copper samples immersed in a plasma atmosphere, by considering two experimental geometric configurations: hollow and plane cathode. In order to reach such goal, three computational models were developed in Fortran 90 language: an one-dimensional transient model (1D, t), a two-dimensional transient model (2D, t) and a two-dimensional transient model (2D, t) which take into account the presence of a sample holder in the experimental assembly. The models were developed based on the finite volume method and, for the two-dimensional configurations, the effect of hollow cathode on the sample was considered as a lateral external heat source. The main results obtained with the three computational models, as temperature distribution and thermal gradients in the samples and in the holder, were compared with those developed by the Laboratory of Plasma, LabPlasma/UFRN, and with experiments available in the literature. The behavior showed indicates the validity of the developed codes and illustrate the need of the use of such computational tool in that process type, due to the great easiness of obtaining thermal information of interest
Resumo:
Environmental Laws and Regulations to dump wastewater are increasingly relevant and, together with pressure from environmentalists, provide awareness of academics in search of solutions. In Brazil, federal law, through Resolution No. 357 of 17/03/05 of the National Environmental Council - CONAMA, in Article 24 deals with the disposal of these effluents. Water pollution with heavy metals is concern because of the difficulty of the treatment and removal from the environment. Copper, for example, is a metallic element and in the form of salt is very soluble in water which dificults its removal. In this context, this study aims to evaluate the extraction of copper with acrylamide polymers through the process of assisted flocculation followed by filtration. Therefore, we used acrylamide polymers, produced by SNF Floerger, with varying degrees of ionicity which is the parameter examined on the extraction of copper. We used the FA polymers FA 920 SH, AH 912 SH, AN 905 SH, AN 910 SH, AN 923 SH, AN 945 SH, AN 956 SH and AN 977 SH, which have anionicities different from each other and growing in that order. The parameters temperature, pH, concentration of the copper solution and stirring speed are fixed. The polymer solution was added to a solution of 200 ppm copper, varying the concentration of polymer. After stirring, an assisted flocculation occurred followed by filtration of the effluent. The filtrate was analyzed by atomic absorption spectrophotometer and the percentage removal of copper ranged from 63 % to 97 %, noting that polymers with higher ionic charge were responsible for the highest percentage of copper extraction. The results of this study showed that these polymers can be applied in the treatment of wastewaters containing metals such as copper
Resumo:
Violência sexual contra crianças não é um evento incomum; no entanto, há a dificuldade de denúncia, pois, além do estabelecimento da relação de dominação que o agressor exerce sobre a vítima, a maneira como tal fato é recebido pela sociedade e como é encaminhado pelas instituições judiciárias responsáveis também é determinante para as omissões. Inserida no universo dos interrogatórios, muitas vezes, a criança causa confusão ao desmentir o que havia falado antes, reforçando possíveis preconceitos em relação a si mesma. O presente trabalho traz a análise das relações entre a infância e a instituição judiciária, com principal enfoque no sistema de comunicação e de notificação dos crimes sexuais contra a criança e as consequentes intervenções profissionais que buscam a validação, ou não, de seu testemunho. Para tanto, foram pesquisados 51 processos judiciais, dos quais foram selecionados dois casos exemplares. Este trabalho evidencia a possibilidade de preservar a criança da revitimização causada pela multiplicidade de interrogatórios, sem deixar de cumprir as normas jurídicas necessárias. A fragilidade da palavra da criança está na forma como é acolhida pelos adultos, desde a revelação na família até a denúncia aos órgãos oficiais, revelando a urgência de alterações nos procedimentos judiciais relacionados a essa problemática
Resumo:
Entitled Joana s several mask: the melancholy in Perto do coração selvagem, the work is divided in six parts: the first one consists of the elaboration of a theoretical sketch about the melancholy that it offers the presuppositions that orientate the work, it is a short introduction about the study of the melancholy, a report until our time, the against-depressive ones and the arrival of the melancholy in Brazil and their particularities; the second part raises the theme of the melancholy, deepening its conception until what is called creative melancholy spread by Walter Benjamin, it serves as anchor for Clarice s writing and as a potential force for the processes lived by the characters of this writer; the third part examines Clarice Lispector s method emphasizing important points of production related to the theme of the melancholy, her style is the psychological analysis; the last one parts (fourth, fifth and sixth parts) are divided in topics that illustrate the conflicts, in most of the time contradictory, of the protagonist Joana, as well as, her difficult interaction with the things and the people that surround her. The fragmentary writing, the being's essential searches, the proximity with the death, the multiplicity of voices of feminine, De profundis, surrealist images, the incessant search for the thing , trips, epiphany, the flaw in the language, the taste of the badly, everything starting from melancholy - transformation and creation tool. The work about melancholy (Freud, Benjamin, Kristeva), it s place of ambiguous and contradictory movements. It is a trip that leads to several corporal and psychological sensations of Joana, enigma-scenes to be deciphered and conflicting images that make you wake up for a critical vision of the modern society. Since the beginning, something pulses without stopping, an incessant memory and the search for something that is lost. We are before recyclings of the interior/exterior, pain/pleasure, visions, abyss, ecstasy in the future and an exit through the melancholic light
Resumo:
Physical Education establishes relations about sex-gender-sexuality by its programs. Thinking approaches among gender and sexuality questions from scholar Physical Education is a productive challenge. Inspired in post-structuralism studies, we problematized dialogues among body, gender, identity and body movement culture. Bodily our sports practices educate citizens beyond their performances, health and beauty. Their "truths" produce gender and sexuality brands in a culture process of branding differences. Cultural events are related in binary categories as good-bad, beautiful-ugly, thin-fat, similar-different, normal-unnatural, man-women, heterosexual-homosexual, that don't let to observe the multiplicity of people educate. We must to understand the pedagogical speeches about bodies as constituents of their own bloods.
Resumo:
This work is inserted to Applied Linguistic studies, concerned to the understanding that language is a social practice, bringing a qualitative research, discussing essential aspects that involve the subject and his/her discursive practice: signification and valuation. Due to this, we have elected as subject study, the sense and values attributed to the verbs make out and date searched on the articles written in the Vestibular 2005 process promoted by the Universidade Federal do Rio Grande do Norte (UFRN), that had the following instruction: In a relationship, is it better make out , just date , or, both, make out and date ? This research is based on the Circle of Bakhtin s dialogic theory, as well as in the notions of instability in the affective relationships nowadays and in the individualization and multiplicity of contemporaneous subjectivity. Those papers are important to analyze the meaning and values that the verbs make out and date present, nowadays, as expressions of an affective relationship and how this situation can interfere in the positions of subjectivity in a formal instance as a vestibular. Those textual productions reflect those relationships, confronting temporary ones, whose discuss is marked, in general, by social voices that evaluate to make out negatively and to date positively
Resumo:
The construction of a mapping of the practices of reading and writing printed and digital texts, declared by graduating students from the Bachelor s degree in Science and Technology (BCT), has provided us the analysis of the course they are making in such a socio-historical moment characterized by the revolution of the post-paper. In this sense, the general objective of this research is to understand how that construction works under the point of view of those graduating students. For this, our reflection has been guided by the search of answers for some questions which have presented to us: what reading and writing conceptions BCT graduating students have; what reading and writing practices those collaborators develop; what collections they declare to have access to; what differences they declare to have between printed and digital reading and writing along the different social roles they develop; what the reader/writer identity relations of those collaborators are. To achieving the plausible answers, we have gathered a corpus composed by texts of three genres of the argument order: academic profiles (or self-portrait), opinion articles and argumentative letters. Besides, we have made semi-structured interviews and questionnaires in the online tool of the Google Docs. The methodology which supports this academic work is the qualitative research (SIGNORINI; CAVALCANTI, 1998)of ethnographic direction (THOMAS, 1993; ANDRÉ, 1995) in Applied Linguistics (CELANI, 2000; MOITA-LOPES, 2006) and the theoretical contribution comes from the bakhtinian perspective of language conception (BAKHTIN [1929] 1981); the socio-historical writing construction (LÉVY, 1996; CHARTIER, R., 1998, 2002, 2007; COSCARELLI, 2006; CHARTIER, A., 2007; ARAÚJO, 2007; COSCARELLI; RIBEIRO, 2007; XAVIER, 2009; MARCUSCHI; XAVIER, 2010); from the studies of the pedagogy of the writing (GIROUX, 1997); from the literacy studies understood as sociocultural practice, plural and situated (TFOUNI, 1988; KLEIMAN, 1995; TINOCO, 2003, 2008; OLIVEIRA; KLEIMAN, 2008), from the studies about identity in postmodernity (HALL, 2003; BAUMAN, 2005). The results of the analysis have pointed at a multiplicity of reading/writing practices of printed and digital texts developed by the BCT graduating students due to the coexistence of the modality printed and that one derived from the new mobile devices. In that multiplicity, the prevalent idea of the collaborators is that there is a continuum between printed texts and digital texts (not a dichotomy), since the option of reading/writing printed texts or digital ones is always linked to specific communication situations, which involve participants, objectives, strategies, values, (dis)advantages, besides (re)creation of discursive genres in function of the mobile devices to which those collaborators have access in the different spheres of activities that they participate. All of that has caused a deep intersection in the identity traces of college students readers/writers in the 21st century which cannot be ignored by academic formation
Resumo:
This work has as objective generality to make a multidimensional analysis in the genre journalistic assay, communicative genre that, beyond complex and multimodal, presents hybrid characteristics. Specifically, with the intention to propose defining criteria of the cited genre, this research looks for to establish differences and similarities between the assay and other genres of the same sphere, from the description and interpretation of used multimodal resources. The analysis of the formal, schematical and rhetorical resources identified in the formatting of the journalistic assay sample that the analyses are supported in the socio-semiotic and socio-rhetorical approaches. In the formal dimension, we contemplate elements that constitute design of the text, including the forms of representation from the typography, the colors, images, as well as the aspects communicative-linguistics: the modalization indices, the communicative operators and the category time; in the schematical dimension, we present the organizational structure, considering the rhetorical movements postulates for Swales (1990) and in the rhetorical dimension we observe the categories: who writes, for who it writes, on what it writes and where writes. The adopted methodologicals postulates are of qualitative nature and the procedure is documentary, data that in we are valid them written texts of this genre as analysis object. Corpus it is constituted by a composed sample for 14 extracted texts of a set of 173 propagated journalistic assays weekly for the magazine Veja, in the period between August of 2004 and January of 2008. The analysis of the data showed that the journalistic assay, object of this study, materializes through multiple symbolic representations and multiple subjects that turn since a small episode of the daily facts of great social relevance in the present time, of historical and cultural nature, nationwide or international. Used for the first time by Montaigne in 1580, to assign, in saying of the proper author, written fast on its life and historical events, which could nor be remembered later , the term `assay' was enriched with other specifications, of form to enclose the one that if they call scientific assay today, academic assay, journalistic assay and other types of specific assays. These denominations have to see with the enrollment of the members of diverse of practices communities, in virtue of the multiplicity of activities carried through in these spheres. The conclusions the one that we arrive had been the following ones: 1. the discursive genre is not a pure entity, in virtue of the multiplicity of situations where the sorts if insert in the social actions; 2. the institutions define the configuration of one definitive genre, also its proper assignment, since for backwards of all discursive genre a voice exists to discipline - institutional voice, and in the case of the assays for analyzed us, the institutional voice if it presents, really, as a defining trace; 3. the journalistic assay, for its multiple symbolic representations, multiple subjects and for passing explicit or implicit opinions of its author, resembles it other genres, being able, therefore, to be inserted in a colony of opinionatives genres
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
We investigate several diffusion equations which extend the usual one by considering the presence of nonlinear terms or a memory effect on the diffusive term. We also considered a spatial time dependent diffusion coefficient. For these equations we have obtained a new classes of solutions and studied the connection of them with the anomalous diffusion process. We start by considering a nonlinear diffusion equation with a spatial time dependent diffusion coefficient. The solutions obtained for this case generalize the usual one and can be expressed in terms of the q-exponential and q-logarithm functions present in the generalized thermostatistics context (Tsallis formalism). After, a nonlinear external force is considered. For this case the solutions can be also expressed in terms of the q-exponential and q-logarithm functions. However, by a suitable choice of the nonlinear external force, we may have an exponential behavior, suggesting a connection with standard thermostatistics. This fact reveals that these solutions may present an anomalous relaxation process and then, reach an equilibrium state of the kind Boltzmann- Gibbs. Next, we investigate a nonmarkovian linear diffusion equation that presents a kernel leading to the anomalous diffusive process. Particularly, our first choice leads to both a the usual behavior and anomalous behavior obtained through a fractionalderivative equation. The results obtained, within this context, correspond to a change in the waiting-time distribution for jumps in the formalism of random walks. These modifications had direct influence in the solutions, that turned out to be expressed in terms of the Mittag-Leffler or H of Fox functions. In this way, the second moment associated to these distributions led to an anomalous spread of the distribution, in contrast to the usual situation where one finds a linear increase with time
Resumo:
In two dimensions the simple addition of two chiral bosons of opposite chiralities does not lead to a full massless scalar field. Similarly, in three dimensions the addition of two Maxwell-Chern-Simons fields of opposite helicities +/- 1 will not produce a parity invariant Maxwell-Proca theory. An interference term between the opposite chiralities (helicities) states is required in order to obtain the expected result. The so-called soldering procedure provides the missing interference Lagrangian in both 2D and 3D cases. In two dimensions such interference term allows to fuse two chiral fermionic determinants into, a non-chiral one. In a recent work we have generalized this procedure by allowing the appearance of an extra parameter which takes two possible values and leads to two different soldered Lagrangians. Here we apply this generalized soldering in a bosonic theory which has appeared in a partial bosonization of the 3D gauged Thirring model with N flavors. The multiplicity of flavors allow new types of solderings and help us to understand the connection between different perturbative approaches to bosonization in 3D. In particular, we obtain an interference term which takes us from a multiflavor Niaxwell-Chern-Simons theory to a pair of self-dual and anti-self-dual theories when we combine together both fermionic determinants of +1/2 and -1/2 helicity fermions. An important role is played by a set of pure non-interacting Chern-Simons fields which amount to a normalization factor in the fermionic determinants and act like spectators in the original theory but play an active role in the soldering procedure. Our results suggest that the generalized soldering could be used to provide dual theories in both 2D and 3D cases. (c) 2007 Elsevier B.V. All rights reserved.
Resumo:
Continuing development of new materials makes systems lighter and stronger permitting more complex systems to provide more functionality and flexibility that demands a more effective evaluation of their structural health. Smart material technology has become an area of increasing interest in this field. The combination of smart materials and artificial neural networks can be used as an excellent tool for pattern recognition, turning their application adequate for monitoring and fault classification of equipment and structures. In order to identify the fault, the neural network must be trained using a set of solutions to its corresponding forward Variational problem. After the training process, the net can successfully solve the inverse variational problem in the context of monitoring and fault detection because of their pattern recognition and interpolation capabilities. The use of structural frequency response function is a fundamental portion of structural dynamic analysis, and it can be extracted from measured electric impedance through the electromechanical interaction of a piezoceramic and a structure. In this paper we use the FRF obtained by a mathematical model (FEM) in order to generate the training data for the neural networks, and the identification of damage can be done by measuring electric impedance, since suitable data normalization correlates FRF and electrical impedance.
Resumo:
Surfactant-polymer interactions are widely used when required rheological properties for specific applications, such as the production of fluids for oil exploration. Studies of the interactions of chitosan with cationic surfactants has attracted attention by being able to cause changes in rheological parameters of the systems making room for new applications. The commercial chitosan represents an interesting alternative to these systems, since it is obtained from partial deacetylation of chitin: the residues sites acetylated can then be used for the polymer-surfactant interactions. Alkyl ethoxylated surfactants can be used in this system, since these non-ionic surfactants can interact with hydrophobic sites of chitosan, modifying the rheology of solutions or emulsions resultants, which depends on the relaxation phenomenon occurring in these systems. In this work, first, inverse emulsions were prepared from chitosan solution as the dispersed phase and cyclohexane as the continuous phase were, using CTAB as a surfactant. The rheological analysis of these emulsions showed pronounced pseudoplastic behavior. This behavior was attributed to interaction of "loops" of chitosan chains. Creep tests were also performed and gave further support to these discussions. Subsequently, in order to obtain more information about the interaction of chitosan with non-ionic surfactants, solutions of chitosan were mixed with C12E8 and and carried out rheological analysis and dynamic light scattering. The systems showed marked pseudoplastic behavior, which became less evident when the concentration of surfactant was increased. Arrhenius and KWW equations were used to obtain parameters of the apparent activation energy and relaxation rate distribution, respectively, to which were connected to the content of surfactant and temperature used in this work
Resumo:
Software Product Line (SPL) consists of a software development paradigm, whose main focus is to identify features common and variability among applications in a specific domain. An LPS is designed to attend all products requirements from its product family. These requirements and LPS may have changes over time due to several factors, such as evolution of product requirements, evolution of the market, evolution of SLP process, evolution of the technologies used to develop the products. To handle these changes, LPS should be modified and evolve in order to not become obsolete, and adapt itself to new requirements. The Changes Impact Analysis is an activity that understand and identify what consequences these changes are cause on LPS. Impact Analysis on LPS may be supported by traceability relationships, which identify relationships between artefacts created during all phases of software development. Despite the solutions of change impact analysis based on traceability for software, there is a lack of solutions for assessing the change impact analysis based on traceability for LPS, since existing solutions do not include estimates specific to the artefacts of LPS. Thus, this paper proposes a process of change impact analysis and an tool for assessing the change impact through traceability of artefacts in LPS. For this purpose, we specified a process of change impact analysis that considers artifacts produced during the development of LPS. We have also implemented a tool which allows estimating and identifying artefacts and products of LPS affected from changes in other products, changes in class, changes in features, changes between releases of LPS and artefacts related to changes in core assets and variability. Finally, the results were evaluated through metrics