Implantação da análise de perigos e pontos críticos de controle no processamento do leite pasteurizado Tipo A

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of a Mixture of Pesticides on the Adult Female Reproductive System of Sprague-Dawley, Wistar, and Lewis Rats

The Brazilian federal government Agency for Health Surveillance detected pesticide residues in fresh food available for consumers all over the country. The current study investigated the effects of a mixture of some of those pesticides (dichlorvos, dicofol, dieldrin, endosulfan, and permethrin) on the reproductive system of Sprague-Dawley (SD), Wistar (WT), and Lewis (LEW) rats. Female rats from each strain were randomized into three experimental groups and were fed a control diet or diets added with pesticides mixture at their respective no-observed-effect level (NOEL)/no-observed-adverse-effect level (NOAEL) (low dose) (mg/kg/d): dichlorvos (0.23), dicofol (0.5), dieldrin (0.025), endosulfan (0.7), permethrin (5), or lowest-observed-effect level (LOEL)/lowest-effect level (LEL)/ lowest-observed-adverse-effect level (LOAEL) (toxically effective dose) (mg/kg/d): dichlorvos (2.3), dicofol (2.1), dieldrin (0.05), endosulfan (3.8), and permethrin (25) as reported in the literature. Euthanasia was performed between wk 10 and 12, during the estrous stage. Decreased body weights gain (SD and WT) and increased liver weights (SD, WT, and LEW) were observed in each strain fed the pesticides mixture at the higher levels. At that dose level, rat strains also varied in their responses regarding the estrous cycle, hormonal levels, and number of developing ovarian follicles. The studied mixture of pesticides was found to interfere with the female reproductive system when individual pesticides were mixed above a certain level, indicating a threshold exists for each of the strains studied.

Comunicação rural pública no Estado de São Paulo: o caso da CATI

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Processing and mechanical properties evaluation of glass fiber-reinforced PTFE laminates

A specific manufacturing process to obtain continuous glass fiber-reinforced RIFE laminates was studied and some of their mechanical properties were evaluated. Young's modulus and maximum strength were measured by three-point bending test and tensile test using the Digital Image Correlation (DIC) technique. Adhesion tests, thermal analysis and microscopy were used to evaluate the fiber-matrix adhesion, which is very dependent on the sintering time. The composite material obtained had a Young's modulus of 14.2 GPa and ultimate strength of 165 MPa, which corresponds to approximately 24 times the modulus and six times the ultimate strength of pure RIFE. These results show that the RIFE composite, manufactured under specific conditions, has great potential to provide structural parts with a performance suitable for application in structural components. (C) 2012 Elsevier Ltd. All rights reserved.

Assessment of variations of the mandibular canal through cone beam computed tomography

The neurovascular bundle may be vulnerable during surgical procedures involving the mandible, especially when anatomical variations are present. Increased demand of implant surgeries, wider availability of three-dimensional exams, and lack of clear definitions in the literature indicate that features of anatomical variations should be revisited. The objective of the study was to evaluate features of anatomical variations related to mandibular canal (MC), such as bifid canals, anterior loop of mental nerve, and corticalization of MC. Additionally, bone trabeculation at the submandibular gland fossa region (SGF) was assessed and related to visibility of MC. Cone beam computed tomography exams from 100 patients (200 hemimandibles) were analyzed and the following parameters were registered: diameter and corticalization of MC; trabeculation in SGF region; presence of bifid MC, position of bifurcations, diameter, and direction of bifid canals; and measurement of anterior loops by two methods. Corticalization of the MC was observed in 59% of hemimandibles. In 23%, MC could be identified despite absence of corticalization. Diameter of MC was between 2.1 and 4 mm for nearly three quarters of the sample. In 80% of the sample trabeculation at the SGF was either decreased or not visible, and such cases showed correlation with absence of MC corticalization. Bifid MC affected 19% of the patients, mostly associated with additional mental foramina. Clinically significant anterior loop (> 2 mm of anterior extension) was observed in 22-28%, depending on the method. Our findings, together with previously reported limitations of conventional exams, draw attention to the unpredictability related to anatomical variations in neurovascularization, showing the contribution of individual assessment through different views of three-dimensional imaging prior to surgical procedures in the mandible.

Oxygen reduction reaction on a Pt/carbon fuel cell catalyst in the presence of trace quantities of ammonium ions: An RRDE study

The effect of trace quantities of ammonia on oxygen reduction reaction (ORR) on carbon-supported platinum catalysts in perchloric acid solutions is assessed using rotating ring disk electrode (RRDE) technique. The study demonstrates that ammonia has detrimental effects on ORR. The most significant effect takes place in the potential region above 0.7 V vs RHE. The effect is explained by the electrochemical oxidation of ammonia, which blocks Pt active sites and increases the formation of H2O2. This leads to losses in the disk currents and increments in the ring currents. The apparent losses in ORR currents may occur in two ways, namely, through the blocking of the active sites for ORR as well as by generating a small anodic current, which is believed to have a lower contribution. In addition, a detrimental effect of sodium cations in the potential range below 0.75 V vs RHE was demonstrated. This effect is most likely due to the co-adsorption of sodium cations and perchlorate anions on the Pt surface. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

Ionic Transport and Water Vapor Uptake of Ammonium Exchanged Perfluorosulfonic Acid Membranes

Nafion membranes series N117 doped with ammonium, at different cation fractions (H+/NH4+), were investigated for ionic transport and water vapor uptake, for several water activities and temperatures. Ammonium cations change both properties of the polymer in a similar manner. Membrane ionic conductivity and water vapor uptake (lambda) decrease as the ammonium concentration increases in the polymer. Ionic transport activation energies are calculated and the transport mechanism of ammonium ions in Nafion is discussed. (C) 2012 The Electrochemical Society. [DOI: 10.1149/2.040203jes] All rights reserved.

Comparison of 3 modes of automated weaning from mechanical ventilation: A bench study

Purpose: Automated weaning modes are available in some mechanical ventilators, but no studies compared them hitherto. We compared the performance of 3 automated modes under standard and challenging situations. Methods: We used a lung simulator to compare 3 automated modes, adaptive support ventilation (ASV), mandatory rate ventilation (MRV), and Smartcare, in 6 situations, weaning success, weaning failure, weaning success with extreme anxiety, weaning success with Cheyne-Stokes, weaning success with irregular breathing, and weaning failure with ineffective efforts. Results: The 3 modes correctly recognized the situations of weaning success and failure, even when anxiety or irregular breathing were present but incorrectly recognized weaning success with Cheyne-Stokes. MRV incorrectly recognized weaning failure with ineffective efforts. Time to pressure support (PS) stabilization was shorter for ASV (1-2 minutes for all situations) and MRV (1-7 minutes) than for Smartcare (8-78 minutes). ASV had higher rates of PS oscillations per 5 minutes (4-15), compared with Smartcare (0-1) and MRV (0-12), except when extreme anxiety was present. Conclusions: Smartcare, ASV, and MRV were equally able to recognize weaning success and failure, despite the presence of anxiety or irregular breathing but performed incorrectly in the presence of Cheyne-Stokes. PS behavior over the time differs among modes, with ASV showing larger and more frequent PS oscillations over the time. Clinical studies are needed to confirm our results. (C) 2012 Elsevier Inc. All rights reserved.

Catalyst Recovery and Recycling Facilitated by Magnetic Separation: Iridium and Other Metal Nanoparticles

The immobilization of metal nanoparticles in magnetic responsive solids allows the easy, fast, and clean separation of catalysts; however, the efficiency of this separation process depends on a strong metalsupport interaction. This interaction can be enhanced by functionalizing the support surface with amino groups. Our catalyst support contains an inner core of magnetite that enables the magnetic separation from liquid systems and an external surface of silica suitable for further modification with organosilanes. We report herein that a magnetically recoverable amino-functionalized support captured iridium species from liquid solutions and produced a highly active hydrogenation catalyst with negligible metal leaching. An analogous Ir0 catalyst prepared with use of a nonfunctionalized support shows a higher degree of metal leaching into the liquid products. The catalytic performance in the hydrogenation of alkenes is compared with that of Rh and Pt catalysts.

Self-similarities of periodic structures for a discrete model of a two-gene system

We report self-similar properties of periodic structures remarkably organized in the two-parameter space for a two-gene system, described by two-dimensional symmetric map. The map consists of difference equations derived from the chemical reactions for gene expression and regulation. We characterize the system by using Lyapunov exponents and isoperiodic diagrams identifying periodic windows, denominated Arnold tongues and shrimp-shaped structures. Period-adding sequences are observed for both periodic windows. We also identify Fibonacci-type series and Golden ratio for Arnold tongues, and period multiple-of-three windows for shrimps. (C) 2012 Elsevier B.V. All rights reserved.

Increasing the activity of copper(II) complexes against Leishmania through lipophilicity and pro-oxidant ability

Copper complexes with fluorinated beta-diketones were synthesized and characterized in terms of lipophilicity and peroxide-assisted oxidation of dihydrorhodamine as an indicator of redox activity. The biological activity of the complexes was tested against promastigotes of Leishmania amazonensis. Inhibition of trypanosomatid-specific trypanothione reductase was also tested. It was found that the highly lipophilic and redox-active bis(trifluoroacetylacetonate) derivative had increased toxicity towards promastigotes. These results indicate that it is possible to modulate the activity of metallodrugs based on redox-active metals through the appropriate choice of lipophilic chelators in order to design new antileishmanials. Further work will be necessary to improve selectivity of these compounds against the parasite.

Quercetin as a shuttle for labile iron

The antioxidant activity of flavonoids may involve their ability to complex body iron in non-redox-active forms. In this study, it was found that the catechol flavonoids rutin and quercetin are able to suppress redox-active labile plasma iron (LPI) in both buffered solution and in iron-overloaded sera. Both flavonoids are effective in loading the metal into the iron-transport protein transferrin. Iron derivatives of quercetin and rutin are able to permeate cell membranes, however, only free quercetin is able to gain access to the cytosol and decrease intracellular labile iron pools. These results suggest that the antioxidant activity of quercetin may be dependent on its ability to shuttle labile iron from cell compartments followed by its transfer to transferrin. (C) 2011 Elsevier Inc. All rights reserved.

Minimum carbon payment along an aridity gradient for dryland afforestation in non annex I countries with stochastic weather and prices

Recent findings demonstrate that trees in deserts are efficient carbon sinks. It remains however unknown whether the Clean Development Mechanism will accelerate the planting of trees in Non Annex I dryland countries. We estimated the price of carbon at which a farmer would be indifferent between his customary activity and the planting of trees to trade carbon credits, along an aridity gradient. Carbon yields were simulated by means of the CO2FIX v3.1 model for Pinus halepensis with its respective yield classes along the gradient (Arid – 100mm to Dry Sub Humid conditions – 900mm). Wheat and pasture yields were predicted on somewhat similar nitrogen-based quadratic models, using 30 years of weather data to simulate moisture stress. Stochastic production, input and output prices were afterwards simulated on a Monte Carlo matrix. Results show that, despite the high levels of carbon uptake, carbon trading by afforesting is unprofitable anywhere along the gradient. Indeed, the price of carbon would have to raise unrealistically high, and the certification costs would have to drop significantly, to make the Clean Development Mechanism worthwhile for non annex I dryland countries farmers. From a government agency's point of view the Clean Development Mechanism is attractive. However, such agencies will find it difficult to demonstrate “additionality”, even if the rule may be somewhat flexible. Based on these findings, we will further discuss why the Clean Development Mechanism, a supposedly pro-poor instrument, fails to assist farmers in Non Annex I dryland countries living at minimum subsistence level.

Diseño de una Metodología de Política Pública de I+D+i para el Desarrollo de la Capacidad de la Innovación en el Sector PYMIS del estado Bolívar, Venezuela

El estado Bolívar con una superficie de 238.000 Km2 se encuentra ubicado al SE de Venezuela y su capital es Ciudad Bolívar. Ocupa el 26,24% de la superficie del territorio nacional. Ciudad Guayana es la principal región del desarrollo económico del estado siendo sede de las empresas básicas de los sectores siderúrgicos y del aluminio que se encargan de la extracción, procesamiento y transformación del mineral de hierro y de la transformación de la bauxita en aluminio primario. Además, cuenta con un gran potencial hidroeléctrico, garantizando el suministro de energía eléctrica para el funcionamiento de las empresas básicas, para el parque industrial de la región, así como para el desarrollo industrial, económico y social de la nación. Con relación al sector de la industria del mineral de hierro y del aluminio, las empresas destinan más del 60 por ciento de su producción al mercado internacional. A pesar de que el sector de las Pequeñas y Medianas Industrias (PYMIS) del estado Bolívar cuenta con un mercado cercano y seguro, no se le ha propiciado un desarrollo integral en términos de orientar sus esfuerzos en innovar en nuevos productos o mejoras de procesos. Debido a la falta del personal de investigación calificado, la escasa vinculación con centros de investigación, la baja inversión en investigación, desarrollo tecnológico e innovación (I+D+i), la ausencia de la aplicación de una política pública de I+D+i y la desarticulación de los miembros del Sistema Regional de Innovación (SRI), constituyen los principales obstáculos para generar bienes y servicios con un alto valor agregado. Esta situación desequilibra y hace ineficiente el funcionamiento del SRI. La baja capacidad de las PYMIS del estado Bolívar en I+D+i, es una situación que impide generar por si sola nuevos productos o procesos para satisfacer las demandas del mercado regional. Por lo tanto, se requiere de la intervención y participación activa de la institución gubernamental responsable del diseño y aplicación de una política pública de I+D+i para dinamizar la capacidad de innovación en las PYMIS, en su articulación y vinculación con los miembros del SRI. xiii El presente proyecto se planteó como objetivo diseñar una metodología de política pública de I+D+i para liderar, coordinar y direccionar el SRI del estado Bolívar, para el desarrollo de la capacidad de innovación en el sector industrial y específicamente en las PYMIS. La presente tesis representa una investigación no experimental de tipo proyectivo que analiza la situación actual del Sistema Regional de Innovación del estado Bolívar. El análisis de los resultados se ha dividido en tres fases. En la primera se realizan diagnósticos por medio de encuestas de las PYMIS en materia de I+D+i, de los centros y laboratorios de investigación pertenecientes a las universidades de la región en el área de Materiales y de los sectores financieros público y privado. En dichas encuestas se evalúa el nivel de integración con los entes gubernamentales que definen y administran la política pública de I+D+i. En la segunda fase, con el diagnóstico y procesamiento de los resultados de la primera fase, se procede a desarrollar un análisis de las fortalezas, oportunidades, debilidades y amenazas (FODA) del Sistema Regional de Innovación, permitiendo comprender la situación actual de la relación y vinculación de las PYMIS con los centros de investigación, instituciones financieras y entes gubernamentales. Con la problemática detectada, resultó necesario el diseño de estrategias y un modelo de gestión de política pública de I+D+i para la articulación de los miembros del SRI, para el apoyo de las PYMIS. En la tercera fase se diseña la metodología de política pública de I+D+i para fortalecer la innovación en las PYMIS. La metodología se representa a través de un modelo propuesto que se relaciona con las teorías de los procesos de innovación, con los modelos de sistemas de innovación y con las reflexiones y recomendaciones hechas por diferentes investigadores e instituciones de cooperación internacional referentes a la aplicación de políticas públicas de I+D+i para dinamizar la capacidad de innovación en el sector industrial. La metodología diseñada es comparada con diferentes modelos de aplicación de política pública de I+D+i. Cada modelo se representa en una figura y se analiza su xiv situación presente y la función que desempeña el ente gubernamental en la aplicación del enfoque de política pública de I+D+i. El diseño de la metodología de política pública de I+D+i propuesta aportará nuevos conocimientos y podrá ser aplicado para apoyar el progreso de la I+D+i en las PYMIS de la región, como caso de estudio, con el fin de impulsar una economía más competitiva y reducir el grado de dependencia tecnológica. La metodología una vez evaluada podrá ser empleada en el contexto de la gran industria y en otras regiones de Venezuela y además, puede aplicarse en otros países con características similares en su tejido industrial. En la tesis doctoral se concluye que el desarrollo de la capacidad de innovación en las PYMIS depende del diseño y aplicación de la política pública de I+D+i como elemento dinamizador y articulador del SRI del estado Bolívar. xv ABSTRACT The Bolivar state with an area of 238,000 km2 is located in the SE of Venezuela and its capital is Ciudad Bolivar. It occupies a surface which is 26.24% of the national territory. Ciudad Guayana is the main area of the state's economic development and the location of the corporate headquarters of the basic steel and aluminum sectors that are responsible for the extraction, processing and transformation of iron ore and bauxite processing for primary aluminum. It also has a great hydroelectric potential, ensuring the supply of electricity for the operation of enterprises, for the regional industrial park as well as for the industrial, economic and social development of the nation. With regard to the iron ore and aluminum industry, companies allocate more than 60 percent of their production to the international market. Although the sector of Small and Medium Industries (SMIs) of the Bolivar state has a secure market, it has not been led to an integral development in terms of targeting its efforts on innovating new products or improving processes. Due to the lack of qualified research staff, poor links with research centers, low investment in research, technological development and innovation (R & D & I), the absence of the implementation of a public policy for R & D & I and the dismantling of the members of the Regional Innovation System (RIS), are the main obstacles to generate goods and services with high added value. This situation makes the RIS unbalanced and inefficient. The low capacity of Bolivar state’s SMIs in R & D & I, is a situation that cannot generate by itself new products or processes to meet regional market demands. Therefore, it requires the active involvement and participation of the government institution responsible for the design and implementation of R & D & I public policy to boost the innovation capacity in SMIs, through the connection and integration with members of the RIS. This project is intended to design a methodology aimed at public policy for R & D & I to lead, coordinate and direct the RIS of Bolivar state, for the development of innovation capacity in the industrial sector and specifically in the SMIs. xvi This thesis is an experimental investigation of projective type which analyzes the current situation of the Regional Innovation System of the Bolivar state. The analysis of the results is divided into three phases. In the first one, a diagnosis is performed through surveys of SMIs in R & D & I centers and research laboratories belonging to the universities of the region in the area of materials and public and private financial sectors. In such surveys the level of integration with government agencies that define and manage the public policy of R & D & I is assessed. In the second phase, with the diagnosis and processing of the results of the first phase, we proceed to develop an analysis of the strengths, weaknesses, opportunities and threats (SWOT) of the Regional Innovation System, allowing the comprehension of the current status of the relationship of SMIs with research centers, financial institutions and government agencies. With the problems identified it was necessary to design strategies and a model of public policy management of R & D & I for the articulation of the members of the RIS, to support the SMIs. In the third phase a public policy methodology for R & D & I is designed in order to strengthen innovation in SMIs. The methodology is shown through a proposed model that relates to the theories of the innovation process, with models of innovation systems and with the discussions and recommendations made by different researchers and institutions of international cooperation concerning the implementation of policies public for R & D & I to boost innovation capacity in the industrial sector. The methodology designed is compared with different models of public policy implementation for R & D & I. Each model is represented in a figure and its current situation and the role of the government agency in the implementation of the public policy approach to R & D & I is analyzed. The design of the proposed public policy methodology for R & D & I will provide new knowledge and can be applied to support the progress of R & D & I in the region’s SMIs, as a case study, in order to boost a more competitive economy and reduce the degree of technological dependence. After being evaluated the methodology can be used in the context of big industry and in other regions of Venezuela and can also be applied in other countries with similar characteristics in their industrial structure. xvii The thesis concludes that the development of the innovation capacity in SMIs depends on the design and implementation of the public policy for R & D & I as a catalyst and coordination mechanism of the Regional Innovation System of the Bolivar state.

O papel do terceiro facilitador na conciliação de conflitos previdenciários

A conciliação judicial de conflitos previdenciários envolve, em geral, uma proposta de acordo baseada na renúncia pelo indivíduo de parte dos valores do benefício em atraso em um processo no qual a decisão contrária ao entendimento do Instituto Nacional do Segurado Social (INSS) é muito provável. Como regra, há um notório desequilíbrio de poder envolvendo, de um lado, um litigante ocasional (indivíduo) e, de outro, um litigante habitual (INSS). O presente trabalho pretende discutir qual o papel do terceiro facilitador nesse contexto, de modo a legitimar a prática existente e avançar para uma mudança de paradigma. Para tanto, parte-se da tese de que a conciliação deve ser adequada ao conflito que se pretende tratar, cabendo ao terceiro facilitador atuar de acordo com as peculiaridades desse conflito. Desse modo, propõe-se que, para o tratamento do conflito previdenciário, o conceito de conciliador deve ser entendido em termos amplos, abrangendo não apenas o conciliador leigo, mas também o juiz conciliador e o Judiciário como conciliador interinstitucional. Embora cada uma dessas atuações possua características próprias, sustenta-se que o ponto em comum é o respeito a um devido processo legal mínimo que possibilite a existência de uma base adequada de poder e que permita, assim, a tomada de uma decisão informada pelas partes. Dessa forma, a flexibilidade instrumental própria da conciliação não impediria o estabelecimento de parâmetros mínimos da atuação do conciliador. Por isso, tendo como limite a tomada de uma decisão informada, o conciliador atuaria por meio de estratégias variadas, aproximando-se e distanciando-se das partes, com maior ou menor interferência, de acordo com as características do caso apresentado. Conclui-se que, com a atuação conjunta e coordenada das diversas espécies de conciliador é possível aprimorar qualitativamente a conciliação de conflitos previdenciários.