The Grasping Problem: Toward Task-Level Programming for an Articulated Hand

This report presents a system for generating a stable, feasible, and reachable grasp of a polyhedral object. A set of contact points on the object is found that can result in a stable grasp; a feasible grasp is found in which the robot contacts the object at those contact points; and a path is constructed from the initial configuration of the robot to the stable, feasible final grasp configuration. The algorithm described in the report is designed for the Salisbury hand mounted on a Puma 560 arm, but a similar approach could be used to develop grasping systems for other robots.

Dynamically Stable Legged Locomotion (September 1985-Septembers1989)

This report documents our work in exploring active balance for dynamic legged systems for the period from September 1985 through September 1989. The purpose of this research is to build a foundation of knowledge that can lead both to the construction of useful legged vehicles and to a better understanding of animal locomotion. In this report we focus on the control of biped locomotion, the use of terrain footholds, running at high speed, biped gymnastics, symmetry in running, and the mechanical design of articulated legs.

Contact Sensors for Dexterous Robotic Hands

This thesis examines a tactile sensor and a thermal sensor for use with the Utah-MIT dexterous four fingered hand. Sensory feedback is critical or full utilization of its advanced manipulatory capabilities. The hand itself provides tendon tensions and joint angles information. However, planned control algorithms require more information than these sources can provide. The tactile sensor utilizes capacitive transduction with a novel design based entirely on silicone elastomers. It provides an 8 x 8 array of force cells with 1.9 mm center-to-center spacing. A pressure resolution of 8 significant bits is available over a 0 to 200 grams per square mm range. The thermal sensor measures a material's heat conductivity by radiating heat into an object and measuring the resulting temperature variations. This sensor has a 4 x 4 array of temperature cells with 3.5 mm center-to-center spacing. Experiments show that the thermal sensor can discriminate among material by detecting differences in their thermal conduction properties. Both sensors meet the stringent mounting requirements posed by the Utah-MIT hand. Combining them together to form a sensor with both tactile and thermal capabilities will ultimately be possible. The computational requirements for controlling a sensor equipped dexterous hand are severe. Conventional single processor computers do not provide adequate performance. To overcome these difficulties, a computational architecture based on interconnecting high performance microcomputers and a set of software primitives tailored for sensor driven control has been proposed. The system has been implemented and tested on the Utah-MIT hand. The hand, equipped with tactile and thermal sensors and controlled by its computational architecture, is one of the most advanced robotic manipulatory devices available worldwide. Other ongoing projects will exploit these tools and allow the hand to perform tasks that exceed the capabilities of current generation robots.

Error Detection and Recovery for Robot Motion Planning with Uncertainty

Robots must plan and execute tasks in the presence of uncertainty. Uncertainty arises from sensing errors, control errors, and uncertainty in the geometry of the environment. The last, which is called model error, has received little previous attention. We present a framework for computing motion strategies that are guaranteed to succeed in the presence of all three kinds of uncertainty. The motion strategies comprise sensor-based gross motions, compliant motions, and simple pushing motions.

Automated Assembly Using Feature Localization

Automated assembly of mechanical devices is studies by researching methods of operating assembly equipment in a variable manner; that is, systems which may be configured to perform many different assembly operations are studied. The general parts assembly operation involves the removal of alignment errors within some tolerance and without damaging the parts. Two methods for eliminating alignment errors are discussed: a priori suppression and measurement and removal. Both methods are studied with the more novel measurement and removal technique being studied in greater detail. During the study of this technique, a fast and accurate six degree-of-freedom position sensor based on a light-stripe vision technique was developed. Specifications for the sensor were derived from an assembly-system error analysis. Studies on extracting accurate information from the sensor by optimally reducing redundant information, filtering quantization noise, and careful calibration procedures were performed. Prototype assembly systems for both error elimination techniques were implemented and used to assemble several products. The assembly system based on the a priori suppression technique uses a number of mechanical assembly tools and software systems which extend the capabilities of industrial robots. The need for the tools was determined through an assembly task analysis of several consumer and automotive products. The assembly system based on the measurement and removal technique used the six degree-of-freedom position sensor to measure part misalignments. Robot commands for aligning the parts were automatically calculated based on the sensor data and executed.

On Motion Planning with Uncertainty

Robots must successfully plan and execute tasks in the presence of uncertainty. Uncertainty arises from errors in modeling, sensing, and control. Planning in the presence of uncertainty constitutes one facet of the general motion planning problem in robotics. This problem is concerned with the automatic synthesis of motion strategies from high level task specification and geometric models of environments. In order to develop successful motion strategies, it is necessary to understand the effect of uncertainty on the geometry of object interactions. Object interactions, both static and dynamic, may be represented in geometrical terms. This thesis investigates geometrical tools for modeling and overcoming uncertainty. The thesis describes an algorithm for computing backprojections o desired task configurations. Task goals and motion states are specified in terms of a moving object's configuration space. Backprojections specify regions in configuration space from which particular motions are guaranteed to accomplish a desired task. The backprojection algorithm considers surfaces in configuration space that facilitate sliding towards the goal, while avoiding surfaces on which motions may prematurely halt. In executing a motion for a backprojection region, a plan executor must be able to recognize that a desired task has been accomplished. Since sensors are subject to uncertainty, recognition of task success is not always possible. The thesis considers the structure of backprojection regions and of task goals that ensures goal recognizability. The thesis also develops a representation of friction in configuration space, in terms of a friction cone analogous to the real space friction cone. The friction cone provides the backprojection algorithm with a geometrical tool for determining points at which motions may halt.

Novelty and Habituation: the Driving Forces in Early Stage Learning for Developmental Robotics

Meng, Q., & Lee, M. (2005). Novelty and Habituation: the Driving Forces in Early Stage Learning for Developmental Robotics. Wermter, S., Palm, G., & Elshaw, M. (Eds.), In: Biomimetic Neural Learning for Intelligent Robots: Intelligent Systems, Cognitive Robotics, and Neuroscience. (pp. 315-332). (Lecture Notes in Computer Science). Springer Berlin Heidelberg.

Learning and Control in Assistive Robotics for the Elderly

Q. Meng and M. H. Lee, Learning and Control in Assistive Robotics for the Elderly, IEEE Conference on Robotics, Automation and Mechatronics (RAM), Singapore, 2004.

Design Issues for Assistive Robotics for the Elderly

Q. Meng and M. H. Lee, Design Issues for Assistive Robotics for the Elderly, IARP / IEEE-RAS / Euron Workshop on Dependable Robots in Human Environments, Manchester, 2004.

Adapting Home Service Robot Behaviours by Experience Reuse and Interaction with Humans

Meng, Q., Lee, M. (2003). Adapting Home Service Robot Behaviours by Experience Reuse and Interaction with Humans. 673-678. Paper presented at IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003), Port Island, Kobe, Japan

Teaching from Examples in Assembly and Manipulation of Snack Food Ingredients by Robot

T. G. Williams, J.J. Rowland, and Lee M.H., Teaching from Examples in Assembly and Manipulation of Snack Food Ingredients by Robot, Proc. IEEE/RSJ Int. Conf. on Robots and Systems (IROS 2001), Nov., 2001, pp2300-2305.

How Useful is Lifelong Evolution for Robotics

Walker,J. and Wilson,M.S., 'How Useful is Lifelong Evolution for Robotics', Proceedings of the 7th International Conference on Simulation of Adaptive Behaviour, ed Hallam,B. and Floreano,D. and Hallam,J. and Hayes,G. and Meyer,J.A., pp 347-348, 2002, MIT Press

Evolving mobile robot behaviours in simulation -- a comparison

Walker,J. and Wilson,M.S., 'Evolving mobile robot behaviours in simulation -- a comparison', Towards Intelligent Mobile Robots; Proceedings of the 3rd annual British conference on autonomous mobile robotics and autonomous systems (TIMR'01), 2001

Endocrine Inspired Modulation of Artificial Neural Networks for Mobile Robotics

Sauze, C and Neal, M. 'Endocrine Inspired Modulation of Artificial Neural Networks for Mobile Robotics', Dynamics of Learning Behavior and Neuromodulation Workshop, European Conference on Artifical Life 2007, Lisbon, Portugal, September 10th-14th 2007.

Design issues for Assistive Robotics for the Elderly

Q. Meng and M.H. Lee, 'Design issues for Assistive Robotics for the Elderly', Advanced Engineering Informatics, 20(2), pp 171-186, 2006.