Heart rate variability in young adults - Reference values and associations with cardiometabolic risk factors and vascular properties. The Cardiovascular Risk in Young Finns Study.

Background: The function of the autonomic nervous system (ANS) can be evaluated with heart rate variability (HRV). Decreased HRV is associated with aging, the male sex, increased heart rate, and overall increased cardiometabolic risk. It has been hypothesized that early atherosclerotic vascular changes and ANS function are related. Aims: The aims were to assess reference values on HRV in young adults, and examine associations with HRV and cardiometabolic risk factors and metabolic syndrome (MetS) and to study relations between HRV and ultrasonographically measured vascular properties. Participants and methods: The present thesis is part of the Cardiovascular Risk in Young Finns Study. The thesis is based on the follow-up study in 2001, when the study individuals were 24-39 years of age. HRV data were available on 1 956 individuals. Results: HRV was inversely associated with age and heart rate (for all p<0.001). Highfrequency HRV (HF) was higher, and low-frequency HRV (LF) lower in women than men (p<0.0001 for both). MetS was associated with 11% decreased HF and 12% increased LF/HF-ratio in women, and 8% decreased HF and 4% increased LF/HF-ratio in men. Carotid artery distensibility was independently associated with HF and total HRV (for both p<0.05). Conclusions: The reference values in young adults were generated. Decreased HRV was associated with age, the male sex and increased heart rate. Women had higher HF and lower LF variability than men. MetS was related to decrease in HRV. The observed associations between carotid elasticity and HRV, supports the hypothesis that reduction in carotid elasticity may lead to decrease in autonomic cardiac control.

Tuotannon mittaristo- ja raportointitoimintatapojen kehittäminen elintarviketeollisuusyrityksessä

Mittaamista on tutkittu paljon ja kasvavissa määrin. Silti yrityksissä ei usein osata tehokkaasti hyödyntää mittaristosta saatavaa informaatiota johtamisen tukena. Tämän työn tavoitteena on selvittää, millainen on hyvä, informatiivinen ja käytännöllinen mittaristo, jota voidaan käyttää tuotantotoiminnan johtamiseen ja ohjaamiseen elintarviketeollisuusyrityksessä. Työn empiirinen osuus on suoritettu laadullisena case-tutkimuksena. Aineisto on kerätty henkilökohtaisilla haastatteluilla, jotka sisälsivät 16 tuotannon toimihenkilön sekä ylemmän toimihenkilön haastattelua. Johtopäätöksenä tutkimuksesta sekä kirjallisuuskatsauksesta esitetään mittaristo tuotantotoiminnan johtamisen apuvälineeksi. Mittaamisen tärkeimmät roolit ovat strategian jalkauttaminen, henkilöstöön vaikuttaminen, ulkoinen raportointi sekä kehityksen seuraaminen. Mittariston eri mittareiden tulee olla keskenään linjassa ja tavoitteiltaan yhdenmukaisia. Mittareiden tavoitteiden on tultava ylhäältä alas, eli ylimmästä johdosta portaittain työntekijätasolle. Mittaustulokset taas tulevat alhaalta ylös, eli työntekijätasosta ylös ylimpään johtoon. Mittauksen on aina oltava kustannustehokasta, eli siitä saatava hyöty on oltava panoksia suurempi. Mittaristo ei ole yrityksessä pysyvä työkalu vaan sitä on jatkuvasti päivitettävä Case-yrityksessä koettiin, ettei mittaristo ohjaa tekemistä eikä jalkauta strategiaa. Mittaamisesta ajateltiin, että mitataan, kun on aina mitattu. Johtamisjärjestelmä sekä mittaristo eri tasoilla koettiin sekavaksi ja epäyhtenäiseksi. Uusi mittaristo luotiin päivä-, viikko- ja kuukausitasolle. Johtamisjärjestelmää selkeytettiin ja johtamista ohjaava mittaristo tehtiin eri organisaatiotasojen välillä linjakkaaksi ja yhtenäiseksi. Mittariston viestimiseen työntekijätasolle luotiin suositukset.

pH titration of native and unfolded ß-trypsin: evaluation of the D D G0 titration and the carboxyl pK values

The stabilizing free energy of ß-trypsin was determined by hydrogen ion titration. In the pH range from 3.0 to 7.0, the change in free energy difference for the stabilization of the native protein relative to the unfolded one (D D G0 titration) was 9.51 ± 0.06 kcal/mol. An isoelectric point of 10.0 was determined, allowing us to calculate the Tanford and Kirkwood electrostatic factor w. This factor presented a nonlinear behavior and indicated more than one type of titratable carboxyl groups in ß-trypsin. In fact, one class of carboxyl group with a pK = 3.91 ± 0.01 and another one with a pK = 4.63 ± 0.03 were also found by hydrogen ion titration of the protein in the folded state

Reference values for lung function tests: I. Static volumes

Static lung volume (LV) measurements have a number of clinical and research applications; however, no previous studies have provided reference values for such tests using a healthy sample of the adult Brazilian population. With this as our main purpose, we prospectively evaluated 100 non-smoking subjects (50 males and 50 females), 20 to 80 years old, randomly selected from more than 8,000 individuals. Gender-specific linear prediction equations were developed by multiple regression analysis with total lung capacity (TLC), functional residual capacity (FRC), residual volume (RV), RV/TLC ratio and inspiratory capacity (IC) as dependent variables, and with age, height, weight, lean body mass and indexes of physical fitness as independent ones. Simpler demographic and anthropometric variables were as useful as more complex measurements in predicting LV values, independent of gender and age (R2 values ranging from 0.49 to 0.78, P<0.001). Interestingly, prediction equations from North American and European studies overestimated the LV at low volumes and underestimated them at high volumes (P<0.05). Our results, therefore, provide a more appropriate frame of reference to evaluate the normalcy of static lung volume values in Brazilian males and females aged 20 to 80 years.

Reference values for lung function tests: II. Maximal respiratory pressures and voluntary ventilation

The strength of the respiratory muscles can be evaluated from static measurements (maximal inspiratory and expiratory pressures, MIP and MEP) or inferred from dynamic maneuvers (maximal voluntary ventilation, MVV). Although these data could be suitable for a number of clinical and research applications, no previous studies have provided reference values for such tests using a healthy, randomly selected sample of the adult Brazilian population. With this main purpose, we prospectively evaluated 100 non-smoking subjects (50 males and 50 females), 20 to 80 years old, selected from more than 8,000 individuals. Gender-specific linear prediction equations for MIP, MEP and MVV were developed by multiple regression analysis: age and, secondarily, anthropometric measurements explained up to 56% of the variability of the dependent variables. The most cited previous studies using either Caucasian or non-Caucasian samples systematically underestimated the observed values of MIP (P<0.05). Interestingly, the self-reported level of regular physical activity and maximum aerobic power correlates strongly with both respiratory and peripheral muscular strength (knee extensor peak torque) (P<0.01). Our results, therefore, provide a new frame of reference to evaluate the normalcy of some useful indexes of respiratory muscle strength in Brazilian males and females aged 20 to 80.

Reference values for lung function tests: III. Carbon monoxide diffusing capacity (transfer factor)

Carbon monoxide diffusing capacity (DLCO) or transfer factor (TLCO) is a particularly useful test of the appropriateness of gas exchange across the lung alveolocapillary membrane. With the purpose of establishing predictive equations for DLCO using a non-smoking sample of the adult Brazilian population, we prospectively evaluated 100 subjects (50 males and 50 females aged 20 to 80 years), randomly selected from more than 8,000 individuals. Gender-specific linear prediction equations were developed by multiple regression analysis with single breath (SB) absolute and volume-corrected (VA) DLCO values as dependent variables. In the prediction equations, age (years) and height (cm) had opposite effects on DLCOSB (ml min-1 mmHg-1), independent of gender (-0.13 (age) + 0.32 (height) - 13.07 in males and -0.075 (age) + 0.18 (height) + 0.20 in females). On the other hand, height had a positive effect on DLCOSB but a negative one on DLCOSB/VA (P<0.01). We found that the predictive values from the most cited studies using predominantly Caucasian samples were significantly different from the actually measured values (P<0.05). Furthermore, oxygen uptake at maximal exercise (VO2max) correlated highly to DLCOSB (R = 0.71, P<0.001); this variable, however, did not maintain an independent role to explain the VO2max variability in the multiple regression analysis (P>0.05). Our results therefore provide an original frame of reference for either DLCOSB or DLCOSB/VA in Brazilian males and females aged 20 to 80 years, obtained from the standardized single-breath technique.

New families of highly efficient, halogen-free flame retardants for polypropylene (PP)

The driving forces for current research of flame retardants are increased fire safety in combination with flame retardant formulations that fulfill the criteria of sustainable production and products. In recent years, important questions about the environmental safety of antimony, and in particular, brominated flame retardants have been raised. As a consequence of this, the current doctoral thesis work describes efforts to develop new halogen-free flame retardants that are based on various radical generators and phosphorous compounds. The investigation was first focused on compounds that are capable of generating alkyl radicals in order to study their role on flame retardancy of polypropylene. The family of azoalkanes was selected as the cleanest and most convenient source of free alkyl radicals. Therefore, a number of symmetrical and unsymmetrical azoalkanes of the general formula R-N=N-R’ were prepared. The experimental results show that in the series of different sized azocycloalkanes the flame retardant efficacy decreased in the following order: R = R´= cyclohexyl > cyclopentyl > cyclobutyl > cyclooctanyl > cyclododecanyl. However, in the series of aliphatic azoalkanes compounds, the efficacy decreased as followed: R = R´= n-alkyl > tert-butyl > tert-octyl. The most striking difference in flame retardant efficacy was observed in thick polypropylene plaques of 1 mm, e.g. azocyclohexane (AZO) had a much better flame retardant performance than did the commercial reference FR (Flamestab® NOR116) in thick PP sections. In addition, some of the prepared azoalkane flame retardants e.g. 4’4- bis(cyclohexylazocyclohexyl) methane (BISAZO) exhibited non-burning dripping behavior. Extrusion coating experiments of flame retarded low density polyethylene (LDPE) onto a standard machine finished Kraft paper were carried out in order to investigate the potential of azoalkanes in multilayer facings. The results show that azocyclohexane (AZO) and 4’4-bis (cyclohexylazocyclohexyl) methane (BISAZO) can significantly improve the flame retardant properties of low density polyethylene coated paper already at 0.5 wt.% loadings, provided that the maximum extrusion temperature of 260 oC is not exceeded and coating weight is kept low at 13 g/m2. In addition, various triazene-based flame retardants (RN1=N2-N3R’R’’) were prepared. For example, polypropylene samples containing a very low concentration of only 0.5 wt.% of bis- 4’4’-(3’3’-dimethyltriazene) diphenyl ether and other triazenes passed the DIN 4102-1 test with B2 classification. It is noteworthy that no burning dripping could be detected and the average burning times were very short with exceptionally low weight losses. Therefore, triazene compounds constitute a new and interesting family of radical generators for flame retarding of polymeric materials. The high flame retardant potential of triazenes can be attributed to their ability to generate various types of radicals during their thermal decomposition. According to thermogravimetric analysis/Fourier transform infrared spectroscopy/MS analysis, triazene units are homolytically cleaved into various aminyl, resonance-stabilized aryl radicals, and different CH fragments with simultaneous evolution of elemental nitrogen. Furthermore, the potential of thirteen aliphatic, aromatic, thiuram and heterocyclic substituted organic disulfide derivatives of the general formula R-S-S-R’ as a new group of halogen-free flame retardants for polypropylene films have been investigated. According to the DIN 4102- 1 standard ignitibility test, for the first time it has been demonstrated that many of the disulfides alone can effectively provide flame retardancy and self-extinguishing properties to polypropylene films at already very low concentrations of 0.5 wt.%. For the disulfide family, the highest FR activity was recorded for 5’5’-dithiobis (2-nitrobenzoic acid). Very low values for burning length (53 mm) and burning time (10 s) reflect significantly increased fire retardant performance of this disulfide compared to other compounds in this series as well as to Flamestab® NOR116. Finally, two new, phosphorus-based flame retardants were synthesized: P’P-diphenyl phosphinic hydrazide (PAH) and melamine phenyl phosphonate (MPhP). The DIN 4102-1 test and the more stringent UL94 vertical burning test (UL94 V) were used to assess the formulations ability to extinguish a flame once ignited. A very strong synergistic effect with azoalkanes was found, i.e. in combination with these radical generators even UL94 V0 rate could be obtained.

Functional, Social and Emotional Values as Determinants of Environmentally Responsible Media Consumption

The primary purpose of this research is to develop an enhanced understanding of how consumption values influence environmentally responsible consumption of print and digital media. Theoretical elaboration considers the associations of functional, social and emotional consumption values, green consumer segmentation and media consumption. Additionally, the purpose is to identify consumer perceptions of print and digital media’s environmental responsibility. Empirical analysis was based on qualitative interviews with a sample of 20 Finnish consumers categorized in two segments: young adults and middle aged consumers. Primary data collection was conducted through individual, semi-structured interviews. To analyze the respondents’ approach on the topic, the interviews disclosed themes of media consumption, perceived environmental friendliness of media, norms of behavior and consumers’ general consumption patterns. The results implicate functional value dominated the consumption decision-making process both in a general level and in media consumption. In addition to functional value, environmental responsibility does provide consumers with both emotional and social values. Analysis on perceived environmental responsibility of media demonstrated consumers generally perceive digital media as an environmentally responsible alternative because it does not create physical paper waste. Nevertheless, the perceptions of environmental responsibility and media consumption patterns lacked a consistent connection. Though, both theory and empirical results indicated an average consumer lacks a comprehensive understanding of digital and print media’s life-cycle and hence their environmental advantages and disadvantages.

Balanced Scorecardin ja palkitsemisen hyödyntäminen palvelutuotannon johtamisessa

Suorituskyvyn johtamista on tutkittu paljon teollisuustalouden näkökulmasta. Sen sijaan palvelutuotannon näkökulmasta katsottuna tutkimustyö on vasta aluillaan. Iso osa yritysten liiketoiminnasta muodostuu palvelujen tuottamisesta, joten palvelutuotannon merkitys on tänä päivänä varsin keskeisessä roolissa. Suorituskyvyn johtaminen tarvitsee rinnalleen kannustavia palkitsemismalleja. Oikein toteutettuna palkitseminen ohjaa strategian mukaisiin tavoitteisiin ja parantaa organisaation tuloksellisuutta. Palkitseminen tulee kuitenkin nähdä riittävän monipuolisena kokonaisuutena. Parhaimmillaan se sitouttaa, motivoi ja kannustaa työntekijöitä entistä parempiin suorituksiin. Epäonnistuessaan sillä on monia negatiivissa vaikutuksia. Se saattaa lisätä epäoikeudenmukaisuuden tunnetta, jolloin työilmapiiri heikkenee sekä poissaolot ja vaihtuvuus lisääntyvät. Tässä tutkimuksessa on keskitytty palvelutuotannon organisaation tutkimiseen. Tutkimuksessa selvitettiin, mitä tekijöitä tulee huomioida logistiikkasektorin palvelutuotannon organisaation onnistumista mitattaessa ja palkitessa. Tutkimus toteutettiin case-organisaatiossa konstruktiivista tutkimusotetta hyödyntäen. Tiedonkeruumenetelmänä käytettiin puolistrukturoituja haastatteluja. Tutkimuksessa rakennettiin suorituskykyä mittaava mallimittaristo ja suorituskykyä tukeva palkitsemismalli. Mittariston viitekehyksenä käytettiin Balanced Scorecardia. Tulosten perusteella voidaan todeta, että palvelutuotannon erityispiirteet tulee huomioida mittaristoa rakennettaessa. Asiakkaan rooli tulee palvelutuotannossa korostuneesti esiin. Lisäksi on huomioitava kohdeorganisaation omat strategiset tavoitteet. Mittaristoon tulee ottaa tulosmittareita, ennakoivia mittareita ja ympäristön muutosta selittäviä mittareita. Palkitsemismalleja tulee tutkia sekä aineellisen että aineettoman palkitsemisen näkökulmista. Aineellisessa palkitsemisessa tulee huomioida suoritukseen perustuva palkitseminen. Aineettomassa palkitsemisessa puolestaan on huomioitava yksilölliset tarpeet, jotka perustuvat henkilökohtaisiin ominaisuuksiin ja arvomaailmaan.

Surface studies of limestones and dolostones : characterisation using various techniques and batch dissolution experiments with hydrochloric acid solutions

In this thesis, stepwise titration with hydrochloric acid was used to obtain chemical reactivities and dissolution rates of ground limestones and dolostones of varying geological backgrounds (sedimentary, metamorphic or magmatic). Two different ways of conducting the calculations were used: 1) a first order mathematical model was used to calculate extrapolated initial reactivities (and dissolution rates) at pH 4, and 2) a second order mathematical model was used to acquire integrated mean specific chemical reaction constants (and dissolution rates) at pH 5. The calculations of the reactivities and dissolution rates were based on rate of change of pH and particle size distributions of the sample powders obtained by laser diffraction. The initial dissolution rates at pH 4 were repeatedly higher than previously reported literature values, whereas the dissolution rates at pH 5 were consistent with former observations. Reactivities and dissolution rates varied substantially for dolostones, whereas for limestones and calcareous rocks, the variation can be primarily explained by relatively large sample standard deviations. A list of the dolostone samples in a decreasing order of initial reactivity at pH 4 is: 1) metamorphic dolostones with calcite/dolomite ratio higher than about 6% 2) sedimentary dolostones without calcite 3) metamorphic dolostones with calcite/dolomite ratio lower than about 6% The reactivities and dissolution rates were accompanied by a wide range of experimental techniques to characterise the samples, to reveal how different rocks changed during the dissolution process, and to find out which factors had an influence on their chemical reactivities. An emphasis was put on chemical and morphological changes taking place at the surfaces of the particles via X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM). Supporting chemical information was obtained with X-Ray Fluorescence (XRF) measurements of the samples, and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) measurements of the solutions used in the reactivity experiments. Information on mineral (modal) compositions and their occurrence was provided by X-Ray Diffraction (XRD), Energy Dispersive X-ray analysis (EDX) and studying thin sections with a petrographic microscope. BET (Brunauer, Emmet, Teller) surface areas were determined from nitrogen physisorption data. Factors increasing chemical reactivity of dolostones and calcareous rocks were found to be sedimentary origin, higher calcite concentration and smaller quartz concentration. Also, it is assumed that finer grain size and larger BET surface areas increase the reactivity although no certain correlation was found in this thesis. Atomic concentrations did not correlate with the reactivities. Sedimentary dolostones, unlike metamorphic ones, were found to have porous surface structures after dissolution. In addition, conventional (XPS) and synchrotron based (HRXPS) X-ray Photoelectron Spectroscopy were used to study bonding environments on calcite and dolomite surfaces. Both samples are insulators, which is why neutralisation measures such as electron flood gun and a conductive mask were used. Surface core level shifts of 0.7 ± 0.1 eV for Ca 2p spectrum of calcite and 0.75 ± 0.05 eV for Mg 2p and Ca 3s spectra of dolomite were obtained. Some satellite features of Ca 2p, C 1s and O 1s spectra have been suggested to be bulk plasmons. The origin of carbide bonds was suggested to be beam assisted interaction with hydrocarbons found on the surface. The results presented in this thesis are of particular importance for choosing raw materials for wet Flue Gas Desulphurisation (FGD) and construction industry. Wet FGD benefits from high reactivity, whereas construction industry can take advantage of slow reactivity of carbonate rocks often used in the facades of fine buildings. Information on chemical bonding environments may help to create more accurate models for water-rock interactions of carbonates.

Becoming a caring nurse : the heart of the matter in nurse education

This thesis in caring science didactics is based on a thinking, where the fundamental basis for the didactic is science-based, i.e. it does not emanate from the nursing profession but brings forward a didactic that grows out of caring science and its core substance and ethos. This view on didactics arises from the caritative theory developed by Eriksson. The overall aim of the study is to clarify the meaning and essence of understanding, as well as to explore and deepen the understanding of student nurses' processes of understanding and becoming with the intention of developing a theory model for caring didactics. The overarching research questions are: What is the essence of understanding (of caring science knowledge)? What are the possibilities and importance of understanding in the appropriation of caring science? What characterizes and impels the process of becoming? The thesis consists of four sub studies and a summary section. The overall methodological approach is hermeneutic involving quantitative as well as qualitative methods. The data for the study has been collected through a longitudinal research project that followed student nurses at three universities during their entire education. The empirical sub studies form the basis for the interpreted knowledge that is formulated in the new understanding. This new understanding have, through additional theory-charging with the theory fragments from Gadamer, generated the heuristic synthesis which is illustrated in the theory model. The findings shows that understanding can be described as something unlimited, as an endless movement, which can be illustrated as a lying eighth, a lemniscate. The lemiscate of understanding is characterized by seeing, knowing and becoming and consists of seven differently named phases; the acquired horizon of understanding, the encounter of horizons, the dialogue of horizons, the fusion of horizons, application, reflection and shaping a new horizon of understanding. Bildung (formation), is the ultimate imprint of the endless spiral movement of understanding. Ethos and arête constitute the hubs around which the lemniscate of understanding circles. These include the spirit and driving force that the student carries within. The caring culture encloses the lemniscate of understanding. The caring culture provides the life space of understanding and the prevailing basic values are evinced in the culture.

Transformation of carbon dioxide to diethyl carbonate over ceria and ceria-supported catalysts

Carbon dioxide is regarded, nowadays, as a primary anthropogenic greenhouse gas leading to global warming. Hence, chemical fixation of CO2 has attracted much attention as a possible way to manufacture useful chemicals. One of the most interesting approaches of CO2 transformations is the synthesis of organic carbonates. Since conventional production technologies of these compounds involve poisonous phosgene and carbon monoxide, there is a need to develop novel synthetic methods that would better match the principles of "Green Chemistry" towards protection of the environment and human health. Over the years, synthesis of dimethyl carbonate was under intensive investigation in the academia and industry. Therefore, this study was entirely directed towards equally important homologue of carbonic esters family namely diethyl carbonate (DEC). Novel synthesis method of DEC starting from ethanol and CO2 over heterogeneous catalysts based on ceria (CeO2) was studied in the batch reactor. However, the plausible drawback of the reaction is thermodynamic limitations. The calculated values revealed that the reaction is exothermic (ΔrHØ298K = ─ 16.6 J/ ) and does not occur spontaneously at rooms temperature (ΔrGØ 298K = 35.85 kJ/mol). Moreover, co-produced water easily shifts the reaction equilibrium towards reactants excluding achievement of high yields of the carbonate. Therefore, in-situ dehydration has been applied using butylene oxide as a chemical water trap. A 9-fold enhancement in the amount of DEC was observed upon introduction of butylene oxide to the reaction media in comparison to the synthetic method without any water removal. This result confirms that reaction equilibrium was shifted in favour of the desired product and thermodynamic boundaries of the reaction were suppressed by using butylene oxide as a water scavenger. In order to obtain insight into the reaction network, the kinetic experiments were performed over commercial cerium oxide. On the basis of the selectivity/conversion profile it could be concluded that the one-pot synthesis of diethyl carbonate from ethanol, CO2 and butylene oxide occurs via a consecutive route involving cyclic carbonate as an intermediate. Since commercial cerium oxide suffers from the deactivation problems already after first reaction cycle, in-house CeO2 was prepared applying room temperature precipitation technique. Variation of the synthesis parameters such as synthesis time, calcination temperature and pH of the reaction solution turned to have considerable influence on the physico-chemical and catalytic properties of CeO2. The increase of the synthesis time resulted in high specific surface area of cerium oxide and catalyst prepared within 50 h exhibited the highest amount of basic sites on its surface. Furthermore, synthesis under pH 11 yielded cerium oxide with the highest specific surface area, 139 m2/g, among all prepared catalysts. Moreover, CeO2─pH11 catalyst demonstrated the best catalytic activity and 2 mmol of DEC was produced at 180 oC and 9 MPa of the final reaction pressure. In addition, ceria-supported onto high specific surface area silicas MCM-41, SBA-15 and silica gel were synthesized and tested for the first time as catalysts in the synthesis of DEC. Deposition of cerium oxide on MCM-41 and SiO2 supports resulted in a substantial increase of the alkalinity of the carrier materials. Hexagonal SBA-15 modified with 20 wt % of ceria exhibited the second highest basicity in the series of supported catalysts. Evaluation of the catalytic activity of ceria-supported catalysts showed that reaction carried out over 20 wt % CeO2-SBA-15 generated the highest amount of DEC.

Replacing Copper with New Carbon Nanomaterials in Electrical Machine Windings

Electrical machines have significant improvement potential. Nevertheless, the field is characterized by incremental innovations. Admittedly, steady improvement has been achieved, but no breakthrough development. Radical development in the field would require the introduction of new elements, such that may change the whole electrical machine industry system. Recent technological advancements in nanomaterials have opened up new horizons for the macroscopic application of carbon nanotube (CNT) fibres. With values of 100 MS/m measured on individual CNTs, CNT fibre materials hold promise for conductivities far beyond those of metals. Highly conductive, lightweight and strong CNT yarn is finally within reach; it could replace copper as a potentially better winding material. Although not yet providing low resistivity, the newest CNT yarn offers attractive perspectives for accelerated efficiency improvement of electrical machines. In this article, the potential for using new CNT materials to replace copper in machine windings is introduced. It does so, firstly, by describing the environment for a change that could revolutionize the industry and, secondly, by presenting the breakthrough results of a prototype construction. In the test motor, which is to our knowledge the first in its kind, the presently most electrically conductive carbon nanotube yarn replaces usual copper in the windings.

Kirkkoherrojen osaamisen johtamisen kehittäminen. Case: Lappeenrannan seurakuntayhtymä

Tässä pro gradu -tutkielmassa tarkastellaan osaamisen johtamista Lappeenrannan seurakuntayhtymässä kirkkoherrojen näkökulmasta. Tutkimuksen tavoitteena on selvittää, miten kirkkoherrojen osaamisen johtamista voidaan kehittää. Tutkielmassa tarkastellaan kirkkoherrojen roolia ja tehtäviä sekä käytössä olevia osaamisen kehittämisen menetelmiä. Lisäksi paneudutaan osaamisen johtamisen haasteisiin ja hengellisen työn erityispiirteisiin. Tutkimus toteutettiin kvalitatiivisena tapaustutkimuksena. Tutkimuksen empiirinen aineisto kerättiin haastattelemalla Lappeenrannan seurakuntayhtymän kaikkia viittä kirkkoherraa. Tutkimuksen tulosten perusteella voidaan havaita, että osaamisen johtaminen ei seurakuntayhtymässä ole kovin suunnitelmallista tai pitkäjänteistä. Tulevaisuuden haasteina nähdään etenkin kirkon yhteiskunnallisen aseman muuttuminen ja jäsenmäärän väheneminen. Suurimpana osaamisen johtamiseen liittyvänä haasteena kirkkoherrat kokevat ajan puutteen. Kirkkoherrojen näkemyksissä omasta roolistaan osaamisen johtamisessa korostuvat kokonaisuuksien hallinta, yleisten suuntaviivojen määrittely ja yhteisen suunnan selkiyttäminen. Osaamisen kehittämisen menetelmiä on käytössä monia, mutta pääpaino on keskusteluissa ja palavereissa sekä koulutuksissa. Hengellisen työn erityispiirteinä nähdään kirkon erityinen arvomaailma sekä uskon henkilökohtainen ja intiimi olemus. Osaaminen tulisi seurakuntayhtymässä ottaa tietoiseksi johtamisen kohteeksi. Kirkkoherrat voivat kehittää omaa osaamisen johtamistaan parantamalla tietoisuutta esimiehen eri rooleista ja tehtäväkentistä. Erityisesti yksilöiden oppimisen tukemiseen ja oppimista edistävän ilmapiirin luomiseen tulisi tulevaisuudessa kiinnittää huomiota. Osaamisen kehittämisen menetelmistä suositeltavia ovat etenkin erilaiset työssä oppimisen keinot.