Implementação da infra-estrutura e protocolo de comunicação para tratamento e disponibilização de dados do projeto ePoste

The study consists in the structure elaboration and the ePoste project communicationprotocol, which is a system of monitoring by wireless communication with the aim tosensor and act with one or many public lighting points, and also the treatment of data todetect the activity in the sensors located on the posts. Previously the communication withsensors were made in locus and when data collect was necessary or the performance inthe devices, the operator had to move until the net place. Accordingly, the purpose has theconcern to increase the system dynamic, achieving the possible integrations with the systemsalready available to the lighting management. The same technology of communicationbetween the sensors are considerate, using the ZigBee protocol running on the meshnet, the communication with this net is made be internet through a gateway by GPRS,device with two basics functionalities, which bypass for data and the firmware update inthe sensor. This functionality test of data management is being tested; integrate way withlocal net of sensors and the internet data server operates. The protocol developed, besidesincorporating the ZigBee, that it is formation of framework in lower level, where definesbeginning, size and errors check, as well as the communication of sensor with the concentrator,which it is encapsulated in ZigBee; also the protocol of upper level, where thatit is the names, it was developed a platform of service to meet GET and POST requestsbeneath HTTP protocol, this service is implemented in the data server, which availablethe communication with the clients systems, in case, lighting management systems.

Automação residencial microcontrolada para transmissão de dados via rede elétrica

This work deals with the specification and the implementation of a protocol for controlling communication between two programmable interface microcontrollers (PIC), using power line communication (PLC), making communication more secure and economically viable. The Protocol was implemented in C language, with reference to some protocols developed for automotive use. A circuit to test the communication between the PLC and the Protocol was also implemented.

Controle em modo dual adaptativo robusto aplicado a um sistema de geração de energia elétrica

Synchronous machines, widely used in energy generation systems, require constant voltage and frequency to obtain good quality of energy. However, for large load variati- ons, it is difficult to maintain outputs on nominal values due to parametric uncertainties, nonlinearities and coupling among variables. Then, we propose to apply the Dual Mode Adaptive Robust Controller (DMARC) in the field flux control loop, replacing the tradi- tional PI controller. The DMARC links a Model Reference Adaptive Controller (MRAC) and a Variable Structure Model Reference Adaptive Controller (VS-MRAC), incorpora- ting transient performance advantages from VS-MRAC and steady state properties from MRAC. Moreover, simulation results are included to corroborate the theoretical studies.

Benchmarking e regulação do setor de distribuição de energia elétrica nacional: proposta para avaliação dos custos operacionais eficientes

In Brazil, the National Agency of Electric Energy (ANEEL) represents the energy regulator. The rates review have been one of its main tasks, which establish a pricing practice at a level to cover the efficient operating costs and also the appropriate return of the distributors investments. The changes in the procedures to redefine the efficient costs and the several studies on the methodologies employed to regulate this segment denote the challenge faced by regulators about the best methodological strategy to be employed. In this context, this research aims to propose a benchmarking evaluation applied to the national regulation system in the establishment of efficient operating costs of electricity distribution utilities. The model is formulated to promote the electricity market development, partnering with government policies ant to society benefit. To conduct this research, an integration of Data Envelopment Analysis (DEA) with the Stochastic Frontier Analysis (SFA) is adopted in a three stages procedure to correct the efficiency in terms of environmental effects: (i) evaluation by means of DEA to measure operating costs slacks of the utilities, in which environmental variables are omitted; (ii) The slacks calculated in the first stage are regressed on a set of environmental variables by means of SFA and operating costs are adjusted to account the environmental impact and statistical noise effects; and, (iii) reassess the performance of the electric power distribution utilities by means of DEA. Based on this methodology it is possible to obtain a performance evaluation exclusively expressed in terms of management efficiency, in which the operating environment and statistical noise effects are controlled.

Contribuições para estratégia de controle aplicada à geração fotovoltaica interconectada à rede elétrica

Generation systems, using renewable sources, are becoming increasingly popular due to the need for increased use of electricity. Currently, renewables sources have a role to cooperate with conventional generation, due to the system limitation in delivering the required power, the need for reduction of unwanted effects from sources that use fossil fuels (pollution) and the difficulty of building new transmission and/or distribution lines. This cooperation takes place through distributed generation. Therefore, this work proposes a control strategy for the interconnection of a PV (Photovoltaic) system generation distributed with a three-phase power grid through a connection filter the type LCL. The compensation of power quality at point of common coupling (PCC) is performed ensuring that the mains supply or consume only active power and that his currents have low distorcion. Unlike traditional techniques which require schemes for harmonic detection, the technique performs the harmonic compensation without the use of this schemes, controlling the output currents of the system in an indirect way. So that there is effective control of the DC (Direct Current) bus voltage is used the robust controller mode dual DSMPI (Dual-Sliding Mode-Proportional Integral), that behaves as a sliding mode controller SM-PI (Sliding Mode-Proportional Integral) during the transition and like a conventional PI (Proportional Integral) in the steady-state. For control of current is used to repetitive control strategy, which are used double sequence controllers (DSC) tuned to the fundamental component, the fifth and seventh harmonic. The output phase current are aligned with the phase angle of the utility voltage vector obtained from the use of a SRF-PLL (Synchronous Reference Frame Phase-Locked-Loop). In order to obtain the maximum power from the PV array is used a MPPT (Maximum Power Point Tracking) algorithm without the need for adding sensors. Experimental results are presented to demonstrate the effectiveness of the proposed control system.

Resolução em tomografia de tempo de trânsito poço-a-poço: a dependência da iluminação

The key aspect limiting resolution in crosswell traveltime tomography is illumination, a well known result but not as well exemplified. Resolution in the 2D case is revisited using a simple geometric approach based on the angular aperture distribution and the Radon Transform properties. Analitically it is shown that if an interface has dips contained in the angular aperture limits in all points, it is correctly imaged in the tomogram. By inversion of synthetic data this result is confirmed and it is also evidenced that isolated artifacts might be present when the dip is near the illumination limit. In the inverse sense, however, if an interface is interpretable from a tomogram, even an aproximately horizontal interface, there is no guarantee that it corresponds to a true interface. Similarly, if a body is present in the interwell region it is diffusely imaged in the tomogram, but its interfaces - particularly vertical edges - can not be resolved and additional artifacts might be present. Again, in the inverse sense, there is no guarantee that an isolated anomaly corresponds to a true anomalous body because this anomaly can also be an artifact. Jointly, these results state the dilemma of ill-posed inverse problems: absence of guarantee of correspondence to the true distribution. The limitations due to illumination may not be solved by the use of mathematical constraints. It is shown that crosswell tomograms derived by the use of sparsity constraints, using both Discrete Cosine Transform and Daubechies bases, basically reproduces the same features seen in tomograms obtained with the classic smoothness constraint. Interpretation must be done always taking in consideration the a priori information and the particular limitations due to illumination. An example of interpreting a real data survey in this context is also presented.

Resolução em tomografia de tempo de trânsito poço-a-poço: a dependência da iluminação

The key aspect limiting resolution in crosswell traveltime tomography is illumination, a well known result but not as well exemplified. Resolution in the 2D case is revisited using a simple geometric approach based on the angular aperture distribution and the Radon Transform properties. Analitically it is shown that if an interface has dips contained in the angular aperture limits in all points, it is correctly imaged in the tomogram. By inversion of synthetic data this result is confirmed and it is also evidenced that isolated artifacts might be present when the dip is near the illumination limit. In the inverse sense, however, if an interface is interpretable from a tomogram, even an aproximately horizontal interface, there is no guarantee that it corresponds to a true interface. Similarly, if a body is present in the interwell region it is diffusely imaged in the tomogram, but its interfaces - particularly vertical edges - can not be resolved and additional artifacts might be present. Again, in the inverse sense, there is no guarantee that an isolated anomaly corresponds to a true anomalous body because this anomaly can also be an artifact. Jointly, these results state the dilemma of ill-posed inverse problems: absence of guarantee of correspondence to the true distribution. The limitations due to illumination may not be solved by the use of mathematical constraints. It is shown that crosswell tomograms derived by the use of sparsity constraints, using both Discrete Cosine Transform and Daubechies bases, basically reproduces the same features seen in tomograms obtained with the classic smoothness constraint. Interpretation must be done always taking in consideration the a priori information and the particular limitations due to illumination. An example of interpreting a real data survey in this context is also presented.

Uma estratégia para otimizar a geração de arranjos em subestações virtuais de energia elétrica

The Virtual Reality techniques applied in Electricity Environments provide a new supervisory control paradigm. The fact of existing a virtual environment (VE), geometrically similar to a real substation, reduces the difference of mental models built by field operators compared with those built by system center operation improving the communication. Beside this, those systems can be used as visualization interfaces for electricity system simulators, training systems for professors and undergraduate students, field operators and maintenance professionals. However, the development process of these systems is quite complex, combining several activities such as implementation, 3D modeling, virtual sceneries construction, usability assessment and management project techniques. In this context, this work present a GUI strategy to build field arrangements based on scene graphs, to reduce time in Virtual Electricity Substations Arrangement development. Through this, mistakes during the VE building can be avoided making this process more reliable. As an concept proof, all toolkits developed in this work were applied in the virtualization of the substations from a Brazilian power concessionary named CEMIG.

Luz-personagem: o jogo de manipulação da iluminação cênica em cenas cômicas

This research has as a central point of discussion the relationship between the action and the stage lighting, directed to scenes in which, from the exchange between actor and professional lighting, you can develop comic situations. The particularity of these scenes is the involvement of lighting as presentification feature a character in the scene, made possible by game created with the actor. In order to develop this discussion, the author divides the text into three chapters, the first being a memorial of his artistic career and his creative processes, enabling the reader to situate the paths taken by the author for the study. Then discusses possible relationship between performance and lighting, pointing situations where the two are directly related. Finally, an analysis and comparison of two comic scenes in which the actor play with the lighting suggests a character through presentification lighting on the scene. Leads the discussion to the conclusion, proposing the term light-character to set the lighting feature, suggesting characters in the scene.

Recomendações para o desenvolvimento de uma ferramenta de suporte às primeiras decisões projetuais visando ao desempenho energético de edificações de escritório em clima quente

PEDRINI, Aldomar; SZOKOLAY, Steven. Recomendações para o desenvolvimento de uma ferramenta de suporte às primeiras decisões projetuais visando ao desempenho energético de edificações de escritório em clima quente. Ambiente Construído, Porto Alegre, v. 5, n. 1, p.39-54, jan./mar. 2005. Trimestral. Disponível em: . Acesso em: 04 out. 2010.

Resistividade elétrica superficial do concreto: influência da cura

A resistividade elétrica superficial do concreto, nos estados fresco e endurecido, pode ser influenciada por alguns fatores, como por exemplo: grau de hidratação, relação água/aglomerante (a/ag), procedimento de cura, teor de agregado e existência de armadura. Este trabalho tem o objetivo de avaliar o desempenho e o comportamento da resistividade elétrica superficial do concreto tendo como base a influência do tempo de cura e relação a/ag. Os concretos dosados foram divididos em três grupos, onde C-0,81 representa o grupo de concretos com relação água/aglomerante de 0,81 e 20 MPa de resistência à compressão; C- 0,50 representa os concretos com relação água/aglomerante de 0,50 e 40 MPa; e C-0,35 representa os concretos com relação água/aglomerante de 0,35 e 60 MPa de resistência à compressão. Os procedimentos de cura aplicados aos três grupos foram: cura seca, cura submersa até os sete dias e cura submersa até os quatorze dias. No presente estudo, os resultados mostraram que quanto maior a relação água/aglomerante, maior será a porosidade da mistura que, por sua vez, eleva a resistividade elétrica. No que tange ao procedimento de cura, os concretos curados a seco apresentaram maiores índices de resistividade que os concretos submersos.

Abordagem quantitativa do coolhunting ao sector da iluminação

Vivemos um momento de crise, com profundas mudanças globais, a nível político, económico-social e tecnológico, que afetam todos os setores de atividade de forma transversal. A iluminação não está de forma alguma imune a estas alterações. A sobrevivência das empresas requer uma atenção permanente às mudanças do mercado. As formas tradicionais de olhar os mercados e os consumidores, podem tornar-se insuficientes face à rapidez com que as mudanças ocorrem. Algumas metodologias heterodoxas de abordagem ao mercado, como é o caso do coolhunting, começam a ser olhadas de outra forma. Uma das limitações apresentadas na literatura relativamente ao coolhunting é o peso da intuição ou de outras metodologias subjetivas nos resultados obtidos. Numa altura de escassez de recursos, poderá ser problemático para um empresário apostar recursos sem poder contar com números na tomada de decisão, mas apenas em imagens e conceitos. Partindo dos resultados qualitativos de um relatório de coolhunting, este Projeto de Mestrado propõe-se criar e testar uma metodologia que seja capaz de fazer uma análise quantitativa desses resultados de forma que seja possível responder à questão: num determinado mercado que conceitos-chave poderão ter um maior potencial de difusão? Um conjunto de países, de entre os chamados BRIC e os PALOP, foram escolhidos para testar a metodologia. Foi assim possível obter valores em forma de índice comparativo desse potencial de difusão. A metodologia utilizada tem ainda um grande potencial de aperfeiçoamento. Na parte final é apresentada um conjunto de pistas com este objetivo.

Gestão de energia em ambiente industrial

A Sociedade da Água de Luso, S.A., localizada no concelho de Mealhada, é uma empresa do setor do engarrafamento de águas minerais naturais, de nascente e de consumo humano. Esta realiza as suas atividades, tendo em consideração a eficiência energética, ao longo do seu processo produtivo. Desta forma, o trabalho desenvolvido teve como objetivo o acompanhamento da implementação do sistema de monitorização e recolha de dados, que posteriormente foi útil na redução dos consumos energéticos (consumo de ar comprimido). Para além disto, também foi proposta uma medida de eficiência energética que visa a redução de energia elétrica na área da iluminação. O sistema de monitorização e recolha de dados e a criação de uma equipa de redução do consumo de ar comprimido permitiram a identificação das áreas de atuação, a monitorização das metas estipuladas no âmbito da equipa e a detecção de anomalias. A medida de eficiência energética aplicada incide na substituição de lâmpadas fluorescentes tubulares T8 por lâmpadas fluorescentes tubulares T5. Assim, a implementação deste sistema e a aplicação das medidas de eficiência energética na rede de ar comprimido no âmbito da equipa permitiram uma redução de 0,03 kWh/hL o que significa uma poupança de 5.600 € em quinze semanas. Ao nível da iluminação as medidas sugeridas permitem uma redução de 8.945 kWh/ano o que corresponde a uma poupança de 1.055 €/ano.

Avaliação Pós-Ocupação da iluminação natural das salas dos setores de aulas teóricas da Universidade Federal do Rio Grande do Norte

The objective of this study is to assess the natural light of the classrooms sectors, at Universidade Federal do Rio Grande do Norte. It was applied the Post-Occupation Evaluation technique, by using questionnaires and brightness levels measurements inside the classrooms. In order to check the users satisfaction degree, it was initially done a general approach on the related aspects to natural light: their characteristics, availability, sources, opening systems and evaluating tools. It was also determined the necessary brightness levels for the activities development in the classroom and the Post-Occupation Evaluation technique used in the search analyses. Then, it was made the UFRN Campus` characterization; the models` definition which formed the data collection basis; the detailing of the procedures used in the research, the processing description and the data analysis. Subsequently, the results that clarify the issues raised were shown through quantitative and / or qualitative data analyses. This research notes a high level of satisfaction by the users, despite some problems such as the reflections occurrence on the board, the lack of uniformity and, occasionally, the brightness low levels