Resposta da caramboleira à calagem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Comparação de critérios de seleção para precocidade de crescimento em bovinos da raça Guzerá

Objetivou-se com este estudo comparar a seleção com base no ganho médio diário de peso na pré-desmama (GMD) e no número de dias para ganhar 160 kg nessa fase (D160), com e sem correção para efeitos de grupos de contemporâneos (GC), em bovinos da raça Guzerá. Utilizou-se o banco de dados de desenvolvimento ponderal da Associação Brasileira de Criadores de Zebu (ABCZ) para esta raça. A obtenção dos parâmetros e valores genéticos foi feita pelo método da máxima verossimilhança restrita utilizando-se modelo unicaracterístico com equações de modelos mistos. O modelo utilizado foi composto pelo efeito fixo de grupo genético e pelos efeitos aleatórios, genético aditivo direto e de ambiente permanente, além do erro residual. A média para D160 foi de 270,5 dias e para GMD, 642,3 g. As correlações de Spearman entre ganho médio diário e a precocidade em dias para ganhar 160 kg na pré-desmama (PD160), e GMD e PD160c (PD160 corrigido para o efeito de grupo de contemporâneo), foram iguais a 0,91 e 0,94, respectivamente. A seleção para PD160 favorece touros que produzem progênie com desempenho superior e menos variável e a padronização deste critério com base no grupo de contemporâneos melhorou sua eficiência. A classificação dos touros varia de acordo com o critério de seleção utilizado, GMD ou PD160, principalmente nos extremos, onde ocorrem seleção e descarte de reprodutores.

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Sistema especialista para detecção de falhas em comandos elétricos

This work consists of the creation of a Specialist System which utilizes production rules to detect inadequacies in the command circuits of an operation system and commands of electric engines known as Direct Start. Jointly, three other modules are developed: one for the simulation of the commands diagram, one for the simulation of faults and another one for the correction of defects in the diagram, with the objective of making it possible to train the professionals aiming a better qualification for the operation and maintenance. The development is carried through in such a way that the structure of the task allows the extending of the system and a succeeding promotion of other bigger and more complex typical systems. The computational environment LabView is employed to enable the system

Análise do comportamento mecânico de espumas cerâmicas a base de alumina obtidas pelo método da réplica

Ceramics with porous cellular structure, called ceramic foams, have a potential use in several applications, such as: thermal insulation, catalyst supports, filters, and others. Among these techniques to obtain porous ceramics the replication method is an important process. This method consists of impregnation of a sponge (usually polymer) with ceramic slurry, followed by a heat treatment, which will happen the decomposition of organic material and sintering the ceramic material, resulting in a ceramic structure which is a replica of impregnated sponge. Knowledge of the mechanical properties of these ceramics is important for these materials can be used commercially. Gibson and Ashby developed a mathematical model to describe the mechanical behavior of cellular solids. This model wasn´t for describing the ceramics behavior produced by the replica method, because it doesn´t consider the defects from this type of processing. In this study were researched mechanical behavior of porous alumina ceramics obtained by the replica method and proposed modifications to the model of Gibson and Ashby to accommodate this material. The polymer sponge used in processing was characterized by thermogravimetric analysis and scanning electron microscopy. The materials obtained after sintering were characterized by mechanical strength tests on 4-point bending and compression, density and porosity and by scanning electron microscopy. From these results it was evaluated the mechanical strength behavior compared to Gibson and Ashby model for solid cellular structure and was proposed a correction of this model through a factor related to struts integrity degree, which consider fissures present in the structure of these materials besides defects geometry within the struts

Índice relativo de clorofila e o estado nutricional em nitrogênio durante o ciclo do cafeeiro fertirrigado

O clorofilômetro (SPAD-502, Minolta) é um aparelho portátil que permite obtenção do índice relativo de clorofila (IRC) de modo simples, rápido e não destrutivo no próprio campo, o qual se correlaciona com a concentração de N em várias culturas, e que pode tornar mais rápida a correção de deficiência, otimizando a utilização da fertirrigação. Objetivou-se com este trabalho verificar se o IRC pode ser indicativo do estado nutricional em N, podendo auxiliar no ajuste da fertirrigação nitrogenada durante o ciclo do cafeeiro. O experimento foi desenvolvido em Botucatu, SP, em área com cafeeiros do cultivar Catuaí Vermelho, com dois anos, no espaçamento de 2,5 x 0,8 m e irrigado por gotejamento. O delineamento experimental utilizado foi em blocos casualizados, com quatro repetições, aplicando-se um tratamento sem adubação, mas com irrigação, e mais quatro tratamentos utilizando fertirrigação com 33, 66, 100 e 133 % da dose de N recomendada, parcelada semanalmente (52,8; 105,6; 160,0; e 212,7 kg ha-1, respectivamente). O IRC aumentou linearmente com as doses de N, e a produtividade correlacionou-se significativamente com o IRC, do florescimento até a colheita, porém não com a concentração de N foliar. Os IRCs nos cafeeiros com maior produtividade foram de 81,5 a 83,2 (florescimento e início de expansão dos frutos), de 76,2 a 78,3 (expansão dos frutos), de 68,3 a 69,8 (início da granação), de 64,0 a 65,9 (na granação) e de 61,7 a 62,7 unidades SPAD (na maturação). O clorofilômetro pode ser utilizado para definir a probabilidade de resposta ao N no decorrer do ciclo do cafeeiro.

Caracterização espectral da água do reservatório de Itupararanga, SP, a partir de imagens hiperespectrais hyperion e análise derivativa

The current accessibility to hyperspectral images of Hyperion/EO1 orbital sensor has brought new perspectives for studies of aquatic environments for allowing the remote estimative of several optically active constituents (OACs) in water body. The changes in the composition and concentration of OACs cause different patterns of absorption and scattering of electromagnetic radiation, likely to be detected using hyperspectral data. Therefore, an investigation was conducted taking into account the spectral characterization of water of a reservoir intended for public supply (Itupararanga Reservoir), from Hyperion/EO1 images and derivative analysis technique applied to spectral curves generated. Simultaneously to the acquisition of a Hyperion/EO1 image, a field campaign was carried out to collect limnological data in situ in georeferenced points. After radiometric correction of the image, reflectance curves of pixels were extracted for each station and the curves obtained were subjected to the technique of derivative analysis, which revealed features of absorption and scattering mainly associated to the presence of algal pigments. The results obtained show the presence of phytoplankton and algal activity, matching the field observation.

Second and Third Order Ionospheric Effects on GNSS Positioning: A Case Study in Brazil

The Global Positioning System (GPS) transmits signals in two frequencies. It allows the correction of the first order ionospheric effect by using the ionosphere free combination. However, the second and third order ionospheric effects, which combined may cause errors of the order of centimeters in the GPS measurements, still remain. In this paper the second and third order ionospheric effects, which were taken into account in the GPS data processing in the Brazilian region, were investigated. The corrected and not corrected GPS data from these effects were processed in the relative and precise point positioning (PPP) approaches, respectively, using Bernese V5.0 software and the PPP software (GPSPPP) from NRCAN (Natural Resources Canada). The second and third order corrections were applied in the GPS data using an in-house software that is capable of reading a RINEX file and applying the corrections to the GPS observables, creating a corrected RINEX file. For the relative processing case, a Brazilian network with long baselines was processed in a daily solution considering a period of approximately one year. For the PPP case, the processing was accomplished using data collected by the IGS FORT station considering the period from 2001 to 2006 and a seasonal analysis was carried out, showing a semi-annual and an annual variation in the vertical component. In addition, a geographical variation analysis in the PPP for the Brazilian region has confirmed that the equatorial regions are more affected by the second and third order ionospheric effects than other regions.

Se inicia oração com pronome clítico? Atitudes linguísticas, na escola, em relação aos padrões brasileiros de colocação pronominal

Focusing on the empirical assessment issue, proposed by Language change theory (cf. cf. WEINREICH; LABOV; HERZOG, 2006; LABOV, [1972] 2008), this research assists to clarifying Portuguese teacher s attitudes in Natal- RN, regarding (a) to proclisis in three specific contexts: in the beginning of a simple/compound sentence (V1), after the subjects (SV), and proclisis after the secondary verb in complex verbal structures (V1V2); (b) to students who use such patterns in usage. Specific contexts were gathered thanks to their representing of the standard variety, as many studies have proven (Martins, 2012; Schei, 2003; Biazzoli, 2010, 2012). The research aims at: (i) verifying by means of a classroom assessment test, whether Portuguese teachers correct proclisis on referred contexts; (ii) identifying, via attitudinal tests what actions teachers take regarding to the usage of standards above mentioned, as well as students as users of those. Twenty Portuguese teachers, picked at random out of different of public schools in Natal-RN, responded to a classroom assessment test in addition to other two attitudinal ones. Results achieved point to a recurring high proclisis correction index of 50% in simple/compound sentences, even though such variety has been implemented to pronominal usage standards in Brazilian Portuguese. This setting of usage was generally assessed negatively, having no commonality between this assessment and the neutral one used by students. Unlike previous setting, the proclisis after subject did not receive any correction of the twenty teachers, what proves coherence with the positive evaluation both the varieties and the students attained. As for the second verb of complex verbal structures, proclisis correction went negative on presenting single results, despite their proximity, with correction indexes of 20% (infinite structures), 10% (present progressive structures) and 25% (participle structures). The assessment on these contexts of proclisis ranged between positive and neutral, also valid for the one students utilized. It means that proclisis in the beginning of simple/compound sentences are yet seemingly spotted in writing school scenario, much likely due to the negative evaluation, opposite to students . Later to subjects and earlier to secondary verbs in structures, proclisis appears to be acknowledged in writing school scenarios, which reflects on teachers assessment as compared to students who use proclisis in these contexts; being in general either positive or neutral

Schwarzschild generalized black hole horizon and the embedding space

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Load compensation in four-wire electrical power systems

This work describes a methodology for power factor control and correction of the unbalanced currents in four-wire electric circuits. The methodology is based on the insertion of two compensation networks, one wye-grounded neutral and another in delta, in parallel to the load. The mathematical development has been proposed in previous work [3]. In this paper, however, the methodology was adapted to accept different power factors for the system to be compensated. on the other hand, the determination of the compensation susceptances is based on the instantaneous values of the load currents. The results are obtained using the MatLab - Simulink environment.

Construção de modelos multivariados para determinação de lipídios totais e unidade em leite em pó comercial utilizando espectroscopia no infravermelho próximo

In this work calibration models were constructed to determine the content of total lipids and moisture in powdered milk samples. For this, used the near-infrared spectroscopy by diffuse reflectance, combined with multivariate calibration. Initially, the spectral data were submitted to correction of multiplicative light scattering (MSC) and Savitzsky-Golay smoothing. Then, the samples were divided into subgroups by application of hierarchical clustering analysis of the classes (HCA) and Ward Linkage criterion. Thus, it became possible to build regression models by partial least squares (PLS) that allowed the calibration and prediction of the content total lipid and moisture, based on the values obtained by the reference methods of Soxhlet and 105 ° C, respectively . Therefore, conclude that the NIR had a good performance for the quantification of samples of powdered milk, mainly by minimizing the analysis time, not destruction of the samples and not waste. Prediction models for determination of total lipids correlated (R) of 0.9955, RMSEP of 0.8952, therefore the average error between the Soxhlet and NIR was ± 0.70%, while the model prediction to content moisture correlated (R) of 0.9184, RMSEP, 0.3778 and error of ± 0.76%

Efeito residual da escória de siderurgia como corretivo de acidez do solo na soqueira de cana-de-açúcar

A escória de siderurgia, como material corretivo e efeito residual prolongado, pode beneficiar culturas de ciclo longo, a exemplo da cana-de-açúcar, minimizando a queda de produção ao longo do ciclo produtivo. Este trabalho objetivou avaliar diferentes níveis de saturação por bases, utilizando, como corretivo do solo, a escória de siderurgia, comparando-a com calcário calcítico, nas alterações de alguns atributos químicos do solo, bem como na resposta da soqueira da cana-de-açúcar. Para isto, realizou-se um experimento com a variedade SP 80-1842, durante o terceiro e o quarto corte, nos anos agrícolas 2000/01 e 2001/02. Os tratamentos, dispostos em blocos casualizados, em esquema fatorial com quatro repetições, constaram de duas fontes de corretivos, calcário calcítico e escória de siderurgia, e quatro níveis de correção, estimados pelo método da saturação por bases (V %): testemunha (sem correção) e com correção para V % de 50; 75 e 100, tendo sido tais corretivos aplicados na época do plantio da cana-de-açúcar. O calcário calcítico e a escória de siderurgia promoveram efeito residual benéfico, após 48 meses da aplicação, na correção da acidez do solo e na elevação do valor da saturação por bases; a maior dose de calcário causou efeito depressivo no perfilhamento, no número de colmos industrializáveis e na produção da cana-de-açúcar, fato não observado com uso da escória de siderurgia; a aplicação da escória de siderurgia e do calcário, em pré-plantio, promoveu efeito residual positivo na produção da soqueira de cana-de-açúcar.

Nasalance and nasality at experimental velopharyngeal openings in palatal prosthesis: a case study

The use of prosthetic devices for correction of velopharyngeal insufficiency (VPI) is an alternative treatment for patients with conditions that preclude surgery and for those individuals with a hypofunctional velopharynx (HV) with a poor prognosis for the surgical repair of VPI. Understanding the role and measuring the outcome of prosthetic treatment of velopharyngeal dysfunction requires the use of tools that allow for documenting pre- and post-treatment outcomes. Experimental openings in speech bulbs have been used for simulating VPI in studies documenting changes in aerodynamic, acoustic and kinematics aspects of speech associated with the use of palatal prosthetic devices. The use of nasometry to document changes in speech associated with experimental openings in speech bulbs, however, has not been described in the literature. Objective: This single-subject study investigated nasalance and nasality at the presence of experimental openings drilled through the speech bulb of a patient with HV. Material and Methods: Nasometric recordings of the word "pato" were obtained under 4 velopharyngeal conditions: no-opening (control condition), no speech bulb, speech bulb with a 20 mm(2) opening, and speech bulb with 30 mm(2) opening. Five speech-language pathologists performed auditory-perceptual ratings while the subject read an oral passage under all conditions. Results: Kruskal-Wallis test showed significant difference among conditions (p=0.0002), with Scheffe post hoc test indicating difference from the no-opening condition. Conclusion: The changes in nasalance observed after drilling holes of known sizes in a speech bulb suggest that nasometry reflect changes in transfer of sound energy related to different sizes of velopharyngeal opening.